Materials Science and Engineering Commons^™

Effects Of Srb Biofilm And Corrosion Product Films On Corrosion Behavior Of Carbon Steel, Jing Lin, Yong-Gui Yan, Guang-Zhang Chen, Guang-Zhou Liu, Qing-Fen Li

Journal of Electrochemistry

Electrochemical techniques and surface analysis techniques were applied to study corrosion characteristic of A₃ steel.The effects on corrosion behavior of A₃ steel by sulfate-reducing bacteria(SRB)(biotic media)and corrosion product(abiotic media)were studied.The results showed that biofilms and corrosion product films play different role during different stages.Biofilms were easier flaky with increasing of its thickness.Non-uniform biofilms reduced pitting corrosion of the specimens.The corrosion product films formed under abiotic conditions were more adherently to the surface of the metal than those formed in biogenic media.

Electrochemical Corrosion Testing Of Boronized And Unboronized Steels, Kranthi K. Pallegar

Theses

Boronizing is a thermo-chemical surface coating technique with which surface properties of materials are enhanced substantially. One of these properties is corrosion resistance. Corrosion resistance testing has been performed in many ways right from the traditional weight loss methods to the latest electrochemical techniques. These electrochemical techniques are more reliable and less time consuming and hence are widely accepted for corrosion testing in the industry.

In the present work, direct current (D.C) corrosion testing studies of both boronized and unboronized steels have been discussed. Three types of steels, AISI 1018, AISI 4340 and AISI 304 stainless steel, were considered for …

Boron Induced Surface Modification Of Transition Metals, Raghasudha Vangaveti

Theses

Boronizing is a thermo-chemical surface treatment of metals in which boron atoms diffuse into the metal substrate and form hard metallic borides. As a result of boronizing, several properties such as hardness, wear resistance, corrosion resistance, and high temperature oxidation resistance improve which make the metal substrate more suitable for industrial applications. These boronized parts are used in many industrial applications like ingot moulds, crucibles, biomedical implants, die-casting moulds, magnetic head applications, drawing dies etc.

The objective of this work was to investigate the influence of boronizing on the properties of transition metals. Three transition metals, tantalum, niobium and tungsten …

High Temperature Heat Exchanger Project: Quarterly Progress Report October 1, 2005 Through December 31, 2005, Anthony Hechanova

Publications (NSTD)

• Liquid Salt Technical Working Group Meeting. The first meeting of the Liquid Salt Technical Working Group was held on October 28, 2005 at the Pratt Whitney Rocketdyne facility in Canoga Park, CA. 20 experts from academia, industry, and national laboratories participated to discuss current state of knowledge and research needs for high temperature liquid salt applications.
• Nuclear Hydrogen Initiative Semi-annual Review. Several participants from the UNLVRF University Consortium gave technical presentations at the NHI Semi-annual Review meeting in Rockville, MD, November 9-10, 2005.
• Quarterly Collaboration Meeting. The University of Nevada, Las Vegas hosted a UNLVRF HTHX Project quarterly meeting December …

Dynamic Sulfur Tolerant Process And System With Inline Acid Gas-Selective Removal For Generating Hydrogen For Fuel Cells, Surjit Randhava, W. S. Winston Ho, Richard L. Kao, Elias H. Camara

Chemical and Materials Engineering Faculty Patents

This invention relates to a sulfur tolerant, dynamic, compact, lightweight fuel process and system that is capable of converting sulfur bearing carbonaceous fuels to hydrogen rich gases suitable for fuel cells or chemical processing applications. The process and system is based on the AHR and WGS reactions, followed by cleanup of byproduct sulfur-containing gases and carbon oxides that would otherwise poison the fuel cell electrocatalyst. Advantageously, this is accomplished via an ASMS and a methanator or an AWMR. The process and system preferably uses a special sulfur tolerant catalysts and hardware designs that enable the conversion in an energy efficient …

Sub-Surface Corrosion Research On Rock Bolt System, Perforated Ss Sheets And Steel Sets For The Yucca Mountain Repository — Quarterly Technical Report No. 6, Dhanesh Chandra, Jaak J.K. Daemen

Publications (YM)

This report encompasses the work done for this fourth quarter of the year 2005, in accordance to cooperative agreement of University of Nevada system for the Task 019 “Subsurface Corrosion Research on Rock Bolt System, Perforated SS Sheets and Steel Sets for the Yucca Mountain Repository”, the overall objective of which is to conduct corrosion research and predict the durability of rock-bolts and other underground metallic roof supports. We have started oxidation tests using Thermogravimetric Analyzer (TGA), and Potentiodynamic tests to determine the corrosion rates of rock bolts, other support materials including bench mark materials. In this quarter, we have …

The Microstructure And Grain Size Of Jet Electroplated Copper Films In Damascene Trench Features, Andrew Tzanavaras, Gregory Young, Stacy H. Gleixner

Faculty Publications

The brightening additive level and dc current density of electroplating baths are two parameters that affect the gap-filling capability and the degree of impurity incorporation in electroplated copper films. Additive incorporation can inhibit grain growth during the room temperature recrystallization process and therefore affect the final grain size. This investigation explores the grain size and microstructure of dc jet-electroplated copper films in 0.35 and 0.50μm Damascene trenches as a function of current density and brightening additive level after first receiving a high-temperature anneal. Unlike a previous study that explored these variables in blanket Cu films [ J. Electrochem. Soc. , …

Polymer-Derived Si-Al-C-N Ceramics:Oxidation, Hot-Corrosion, And Structural Evolution, Yiguang Wang

Electronic Theses and Dissertations

Polymer-derived ceramics are a new class of materials synthesized by thermal decomposition of polymer precursors. Previous studies have shown that the materials exhibit excellent thermo-mechanical properties and can be stable at temperatures up to 2000oC. Furthermore, the novel polymer-to-ceramics process enables the manipulation of the ceramic structures at the atomic/nano level by designing the chemistry of polymer precursors and controlling the pyrolysis conditions, thereby, the properties of ceramics. In this dissertation, oxidation/hot-corrosion behavior and the structural evolution of Si-Al-C-N ceramics have been studied. The structural evolution and crystallization behavior of the SiCN and SiAlCN ceramics are investigated using FT-IR, XRD, …

Fast And Slow Magnetization Processes In Magnetic Recording Media, Jian Zhou, Ralph Skomski, Steven A. Michalski, Roger D. Kirby, David J. Sellmyer

Materials Research Science and Engineering Center: Faculty Publications

Information loss due to thermal activation is a major concern in ultrahigh-density magnetic recording media. The usually considered mechanism is thermally activated magnetization reversal over micromagnetic energy barriers. However, micromagnetic approaches ignore local anisotropy fluctuations, which translate into a time-dependent reduction of the remanent magnetization. The effect is negligibly small in macroscopic magnets but becomes important on a scale of a few nanometers.

Spin-Polarized Electronic Structure, Arti Kashyap, Renat F. Sabirianov, Sitaram Jaswal

Materials Research Science and Engineering Center: Faculty Publications

This chapter is devoted to the electronic structure of nanoscale metallic magnets. After an introduction to methods of electronic structure calculations, we review how recent trends translate into the description of magnetic nanostructures. Among the considered structures are nanowires, small particles, surfaces and interfaces, and multilayers, and emphasis is on magnetic properties such as moment and magnetization, interatomic exchange, and anisotropy.

One of the goals of computational nanoscience is to calculate physical and chemical properties from first principles. This requires the knowledge of the electronic structures of the materials system in question. The density-functional theory (DFT) makes a huge step …

"Introduction" To Advanced Magnetic Nanostructures, David J. Sellmyer, Ralph Skomski

Materials Research Science and Engineering Center: Faculty Publications

The nanostructures considered here are magnetic and characterized by structural length scales ranging from a few interatomic distances to about one micrometer. The basic length unit is the nanometer (1 nm = 10^–3 μm = 10^–9 m), corresponding to about four interatomic Fe-Fe distances. Magnetic nanostructures pose experimental challenges, exhibit interesting physical phenomena, and have many present or potential applications. An important aspect is that structural lengths affect, but only partly determine, the magnetic length scales encountered in the structures. Examples are domains in semihard nanoparticles, where both the domain size and the domain-wall thickness may be smaller …

A Measurement Of Electron-Wall Interactions Using Transmission Diffraction From Nanofabricated Gratings, Brett E. Barwick, Glen Gronniger, Lu Yuan, Sy-Hwang Liou, Herman Batelaan

Materials Research Science and Engineering Center: Faculty Publications

Electron diffraction from metal coated freestanding nanofabricated gratings is presented, with a quantitative path integral analysis of the electron-grating interactions. Electron diffraction out to the 20th order was observed indicating the high quality of our nanofabricated gratings. The electron beam is collimated to its diffraction limit with ion-milled material slits. Our path integral analysis is first tested against single slit electron diffraction, and then further expanded with the same theoretical approach to describe grating diffraction. Rotation of the grating with respect to the incident electron beam varies the effective distance between the electron and grating bars. This allows the measurement …

Polymer-Derived Ceramics: Electronic Properties And Application, Weixing Xu

Electronic Theses and Dissertations

In this work, we studied the electronic behavior of polymer-derived ceramics (PDCs) and applied them for the synthesis of carbon nanotube reinforced ceramic nanocomposites and ceramic MEMS (Micro-Electro-Mechanical Systems) structures. Polymer-derived SiCN ceramics were synthesized by pyrolysis of a liquid polyureasilazane with dicumyl peroxide as thermal initiator. The structural evolution during pyrolysis and post-annealing was studied using FTIR, solid state NMR and Raman. The results revealed that the resultant ceramics consisted of SiCxNx-4 as major building units. These units were connected with each other through C-C/C=C bonds or by shearing N/C. The amount of sp2 free carbon strongly depends on …

Laser Metallization And Doping For Silicon Carbide Diode Fabrication And Endotaxy, Zhaoxu Tian

Electronic Theses and Dissertations

Silicon carbide is a promising semiconductor material for high voltage, high frequency and high temperature devices due to its wide bandgap, high breakdown electric field strength, highly saturated drift velocity of electrons and outstanding thermal conductivity. With the aim of overcoming some challenges in metallization and doping during the fabrication of silicon carbide devices, a novel laser-based process is provided to direct metallize the surface of silicon carbide without metal deposition and dope in silicon carbide without high temperature annealing, as an alternative to the conventional ion implantation, and find applications of this laser direct write metallization and doping technique …

Development Of Thermally Processed Nanocomposites With Controlled Surfaces, Petya Georgieva

Electronic Theses and Dissertations

The ever increasing need for technology development requires the integration of inexpensive, light weight and high strength materials which are able to meet the high standards and specifications for various engineering applications. The intention of this work is to show that the suitable material selection and the utilization of plasma spray processing can be of potential interest to a large number of industrial, biomedical and everyday life applications. This research demonstrates also that plasma processing is a promising engineering tool for multifunctional coatings and near-net-shape manufacturing. Further, the theoretical and experimental results are combined in order to explain the mechanisms …

Magnetic Properties Of Sputter Deposited Fe-Based Amorphous Thin Films For Resonator Application, Chaitali China

Electronic Theses and Dissertations

In this study we investigate the magnetic properties of Fe-based amorphous thin films. Fe1-x-y-zBxSiyCz, Fe80-xNixB20, Fe80-xMnxB20, and Fe73-xMnxB27 films were deposited on silicon and glass substrates in a DC and RF magnetron sputtering system. Inductive magnetic measurements were performed to investigate the magnetic properties, including induced anisotropy and magnetostriction, of the as-deposited and annealed films using an M-H Looper. The chemical composition of the films was characterized using secondary ion mass spectroscopy (SIMS). The physical thickness of the films was determined by use of a stylus profilometer. The M-H Looper studies indicated that the induced anisotropy (Hk) depends strongly on …

Fundamental Aspects Of Regenerative Cerium Oxide Nanoparticles And Their Applications In Nanobiotechnology, Swanand Patil

Electronic Theses and Dissertations

Cerium oxide has been used extensively for various applications over the past two decades. The use of cerium oxide nanoparticles is beneficial in present applications and can open avenues for future applications. The present study utilizes the microemulsion technique to synthesize uniformly distributed cerium oxide nanoparticles. The same technique was also used to synthesize cerium oxide nanoparticles doped with trivalent elements (La and Nd). The fundamental study of cerium oxide nanoparticles identified variations in properties as a function of particle size and also due to doping with trivalent elements (La and Nd). It was found that the lattice parameter of …

Synthesis, Processing And Characterization Of Nanocrystalline Titanium Dioxide, Shipeng Qiu

Electronic Theses and Dissertations

Titanium dioxide (TiO2), one of the basic ceramic materials, has found a variety of applications in industry and in our daily life. It has been shown that particle size reduction in this system, especially to nano regime, has the great potential to offer remarkable improvement in physical, mechanical, optical, biological and electrical properties. This thesis reports on the synthesis and characterization of the nanocrystalline TiO2 ceramic in details. The study selected a simple sol-gel synthesis process, which can be easily controlled and reproduced. Titanium tetraisopropoxide, isopropanol and deionized water were used as starting materials. By careful control of relative proportion …

Preparation Of Efficient Cuin1-Xgaxse2-Ysy/Cds Thin-Film Solar Cells By Optimizing The Molybdenum Back Contact And Using Diethylselenide As Selenium Precursor, Ankur Kadam

Electronic Theses and Dissertations

High efficiency CuIn1-xGaxSe2-ySy (CIGSS)/CdS thin-film solar cells were prepared by optimizing the Mo back contact layer and optimizing the parameters for preparing CIGSS absorber layer using diethylselenide as selenium source. The Mo film was sputter deposited on 2.5 cm x 10 cm soda-lime glass using DC magnetron sputtering for studying the adhesion and chemical reactivity with selenium and sulfur containing gas at maximum film growth temperature. Mo being a refractory material develops stresses, nature of which depends on the deposition power and argon pressure. It was found that the deposition sequence with two tensile stressed layers deposited at 200W and …

Nanodot-Based Organic Memory Devices, Zhengchun Liu

Doctoral Dissertations

In this study, resistor-type, diode-type, and transistor-type organic memory devices were investigated, aiming at the low-cost plastic integrated circuit applications. A series of solution-processing techniques including spin-coating, inkjet printing, and self-assembly were employed to fabricate these devices.

The organic resistive memory device is based on a novel molecular complex film composed of tetracyanoquinodimethane (TCNQ) and a soluble methanofullerene derivative [6,6]-phenyl C61-butyric acid methyl ester (PCBM). It has an Al/molecules/Al sandwich structure. The molecular layer was formed by spin-coating technique instead of expensive vacuum deposition method. The current-voltage characteristics show that the device switches from the initial 'low' conduction state to …

Low Temperature Co-Fired Ceramics For Micro-Fluidics, John Youngsman, Brian Marx, Martin Schimpf, Scott Wolter, Jeff Glass, Amy Moll

Materials Science and Engineering Faculty Publications and Presentations

The miniaturization of analytical instruments and packaging of novel sensors is an area that has attracted significant research interest and offers many opportunities for product commercialization. Low Temperature Co-fired Ceramics (LTCC) is a materials system composed of alumina and glass in an organic binder. LTCC is a good choice for sensor development because of the ease of incorporating features in the ‘green’ or unfired state such as electrical traces, fluidic pathways and passive electrical components. After a firing cycle, what remains is a robust, monolithic device with features embedded in the package. In order for LTCC to be a successful …

Cracking Of Martensitic Alloy Ep-823 Under Controlled Potential, Ajit K. Roy, M. K. Hossain

Mechanical Engineering Faculty Research

The susceptibility of martensitic Alloy EP-823 to stress corrosion cracking was evaluated with and without an applied cathodic potential using the slow-strain-rate (SSR) testing technique. The magnitude of the applied potential was based on the corrosion potential determined by cyclic polarization. The cracking susceptibility in an acidic environment at different temperatures was expressed in terms of the true failure stress (ơ_f), time to failure (TTF), and ductility parameters, including percent elongation (%El) and percent reduction in area (%RA). The data indicate that the magnitudes of ơ_r, TTF, %El, and %RA were reduced due to cathodic charging. …

Corrosion Mechanisms And Kinetics Of Steels In Lead-Bismuth Eutectic: Quaterly Report, Allen L. Johnson, John Farley

Transmutation Sciences Materials (TRP)

A large number of studies of corroded samples were conducted using SEM, XPS, probe, and the TEM. Samples from the DELTA loop at LANL and from other sources were examined. Also, the investigation of 316 class stainless steel in LBE is continuing.

Corroded samples of D-9 steel have been in the process of being studies, which is a variant of 316 stainless steel that is optimized for resistance to swelling. The D-9 samples are notable for the process in which a localized failure of the protective oxide layer becomes widespread corrosion. The research group is examining the D-9 samples using …

Effect Of Silicon Content On The Corrosion Resistance And Radiation- Induced Embrittlement Of Materials For Advanced Heavy Liquid Metal Nuclear Systems, Ajit K. Roy

Transmutation Sciences Materials (TRP)

This task is primarily focused on the evaluation of the effect of Si content on the susceptibility of modified 9Cr-1Mo-0.24V steel to stress corrosion cracking (SCC) and localized cracking in both molten lead-bismuth eutectic (LBE) and an aqueous solution of acidic pH.

Further, significant efforts are in progress to characterize the deformation mechanism of modified T91 grade steel as a function of temperature and strain rate. Simultaneously, surface analyses of the tested materials are ongoing using state-of-the-art techniques including scanning electron microscopy (SEM) and transmission electron microscopy (TEM).

Corrosion Barrier Development For Lbe Corrosion Resistance: Quarterly Report (April 2006), Biswajit Das

Transmutation Sciences Materials (TRP)

As reported in the last quarterly report, synthesis of Cr nanowires was found to be problematic in terms of uniform coverage. Hence Ni was identified as the alternative metal to form the nanowires. The purpose of the metal nanowires is to provide structural integrity to the nanoporous alumina, as well as a second defense mechanism against corrosion by oxidizing in case the top alumina layer is compromised. Nickel was selected due to its established electrochemical synthesis procedure. While Ni can provide very good structural integrity to the porous alumina, one potential problem is its higher dissolution rate in LBE. However, …

Development Of Nanostructure Based Corrosion-Barrier Coatings On Steel For Transmutation Applications, Biswajit Das

Transmutation Sciences Materials (TRP)

Advanced transmutation systems require structural materials that are able to withstand high neutron fluxes, high thermal cycling, and high resistance to chemical corrosion. The current candidate materials for such structures are ferritic and ferritic-martensitic steels due to their strong resistance to swelling, good microstructural stability under irradiation, and the retention of adequate ductility at typical reactor operating temperatures.

In parallel, lead bismuth eutectic (LBE) has emerged as a potential spallation target material for efficient production of neutrons, as well as a coolant in the accelerator system. While LBE has excellent properties as a nuclear coolant, it is also highly corrosive …

Second Generation Waste Package Design Study, Sam Armijo, Mano Misra

Publications (YM)

The design of waste packages currently proposed for YMP is highly conservative. The candidate materials of construction of the waste packages and drip shields while highly corrosion resistant are extremely expensive and components made from these materials will require complex and expensive fabrication methods to assure their integrity. A proposed, second generation operating concept and waste package design, is intended to permit more efficient and less costly operation of the repository while maintaining waste package integrity. Major reductions in waste package costs can be realized by increasing the number of fuel assemblies stored in each waste package, eliminating the reference …

Interaction Between Metal Fission Products And Triso Coating Materials: A Study Of Chemical Bonding And Interdiffusion: 1st Quarterly Report, 2006, Clemens Heske

Fuels Campaign (TRP)

This project is devoted to an in-depth study of the chemical and electronic impact of metal fission products on the coating layers in TRISO nuclear fuel. In particular, there is a focus on the investigation of Pd, Cs, and Ag and their interface formation with SiC and carbon-based substrates. A variety of surface and near-surface bulk sensitive probes that investigate the occupied and unoccupied electronic states of the substrate and the metal overlayer have been utilized. By a controlled and stepwise deposition of the metal overlayer, it is possible to gain substantial insight into the formation of interfaces and their …

Interaction Between Metal Fission Products And Triso Coating Materials, Clemens Heske

Fuels Campaign (TRP)

In this project the chemical bonding and interface formation of metal fission products with the coating materials used in TRISO fuel particles is investigated. The interface formation of Pd, Cs, and Ag with SiC and pyrolytic carbon is studied in detail. Using the SiC single crystals and TRISO coating materials as substrates, interfaces are prepared under controlled conditions in an ultra-high vacuum environment and are studied with a photoelectron spectroscopy, Auger electron spectroscopy, Inverse Photoemission, X-ray emission spectroscopy, and X-ray absorption spectroscopy. Recent additions to the experimental approach include microscopic techniques (Transmission Electron Microscopy, Scanning Tunneling Microscopy, Atomic Force Microscopy) …

Dissolution, Reactor, And Environmental Behavior Of Zro2-Mgo Inert Fuel Matrix, Kenneth Czerwinski

Fuels Campaign (TRP)

This project examines inert fuels containing ZrO₂ and MgO as the inert matrix, with the relative amount of MgO varied from 30% to 70% in ZrO₂. Reactor physics calculations are used to examine suitable quantities of burnable poisons from the candidate elements Gd, Er, or Hf with reactor grade Pu providing the fissile component, with up to 10% of ²³⁹Pu. Ceramics are synthesized and characterized based on the reactor physics results. The solubility of the fuel ceramics, in reactor conditions, reprocessing conditions, and repository conditions, are investigated in a manner to provide thermodynamic data necessary for …