Open Access. Powered by Scholars. Published by Universities.®

Materials Science and Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Theses and Dissertations

Discipline
Institution
Keyword
Publication Year

Articles 391 - 420 of 436

Full-Text Articles in Materials Science and Engineering

Design, Fabrication, Modeling, And Optical Characterization Of Organic Polymer Nonlinear Directional Couplers, John N. Berry Dec 1994

Design, Fabrication, Modeling, And Optical Characterization Of Organic Polymer Nonlinear Directional Couplers, John N. Berry

Theses and Dissertations

This research was an investigation into the suitability of a recently developed polymer, polyphenylene, as a material for integrated optical circuits (IOCs). Polymers show great promise in the area of IOCs because of material processing advantages, compatibility with most existing integrated circuit technology, and relatively strong nonlinear optical characteristics. This thesis contains an overview of: dielectric waveguides, linear and nonlinear directional coupler theory; various models useful in the design and analysis of optical waveguides; the fabrication of three different waveguide designs; the experimental apparatus and procedure used to optically characterize the waveguides; and the experimental results of the characterization. Waveguiding …

Go to article

The Junction Characteristics And Current Conduction Mechanisms Of Gainp2 N+P Diodes And Solar Cells, Kitt C. Reinhardt Dec 1994

The Junction Characteristics And Current Conduction Mechanisms Of Gainp2 N+P Diodes And Solar Cells, Kitt C. Reinhardt

Theses and Dissertations

This work involves an investigation of GaInP2 n+p diode and solar cell dark current mechanisms, the defect centers that affect these mechanisms, and the response of dark current and solar cell photovoltaic parameters to I MeV electron irradiation and thermal annealing. Dark current due to carrier diffusion, recombination, and tunneling were identified, and recombination current was found to dominate at the maximum power-point voltage of the GaInP2 solar cells. Carrier recombination was found to occur via defect centers at the perimeter and within the bulk of the junction. Two deep majority-hole trap centers were found at E …

Go to article

The Excitation Mechanism Of Praseodymium-Doped Semiconductors, Paul L. Thee Jun 1994

The Excitation Mechanism Of Praseodymium-Doped Semiconductors, Paul L. Thee

Theses and Dissertations

This study on praseodymium Pr luminescence in AlxGa1-xAs was conducted to enhance the understanding of the excitation mechanism. Pr was implanted at 390 keV with doses from 5 x 1012 to 5 x 1013 cm2 into AlxGa1-xAs x0.0 to 0.50 wafers which were annealed using the rapid thermal annealing RTA method. Low temperature photoluminescence PL was conducted using an Ar-ion laser and Ge detector. PL emissions of Pr from all hosts include peaks near 1.3 and 1.6 µm which are assigned to the intra-4f transitions of 1G4 yielding 3H5 …

Go to article

Rapid And Accurate Timing Simulation Of Radiation-Hardened Digital Microelectronics Using Vhdl, Charles P. Brothers Jr. Mar 1994

Rapid And Accurate Timing Simulation Of Radiation-Hardened Digital Microelectronics Using Vhdl, Charles P. Brothers Jr.

Theses and Dissertations

This dissertation presents the development of a fast, accurate, timing simulation capability based on VHSIC Hardware Description Language VHDL without the use of back annotation of timing delay information. This VHDL-based timing simulator is intended for use with radiation-hardened microelectronics in simulating timing of circuit operation in pre-radiation, post-radiation 1 MradSi total dose, and ionizing dose radiation environments. Development of the timing models are presented. The implementation of the timing models are incorporated into a VHDL library composed of basic logic gates and flip-flops. Simulations of complex circuits were run in SPICE and VHDL to assess the timing accuracy and …

Go to article

Static Fracture Behavior Of A Ceramic Matrix Composite At Elevated Temperatures, David M. Agins Dec 1993

Static Fracture Behavior Of A Ceramic Matrix Composite At Elevated Temperatures, David M. Agins

Theses and Dissertations

This study investigated systematically the damage initiation damage progression, and failure modes of a ceramic matrix composite, Nicalon/CAS, when loaded in tension at elevated temperatures in the presence of air. A cross-ply lay-up, [0/90]2s, was studied. The primary means of analysis were stress-strain data taken during monotonic and incremental load tests and crack density assessments. Testing was conducted at room temperature 700°C, and 850°C. The stress-strain response was consistent for monotonic and incremental loading, except for a decrease in failure load at the elevated temperatures. Initial damage progression was also consistent, but the damage leading to failure and …

Go to article

Investigation Of Tension-Compression Fatigue Behavior Of A Cross-Ply Metal Matrix Composite At Room And Elevated Temperatures, Elizabeth A. Boyum Dec 1993

Investigation Of Tension-Compression Fatigue Behavior Of A Cross-Ply Metal Matrix Composite At Room And Elevated Temperatures, Elizabeth A. Boyum

Theses and Dissertations

This research, the first load-controlled tension-compression fatigue testing to be performed on a MMC, extends the existing knowledge of MMC fatigue damage mechanisms to include the tension compression loading condition. To accomplish this, a (0/90)2, SCS-6/Ti-15-3 laminate was subjected to tension- tension fatigue at room temperature, and tension-compression fatigue at both room temperature and 427°C. Stress and strain data was taken to evaluate the macro-mechanic behavior of the material. Microscopy and fractography were performed to characterize the damage on a micro-mechanic level. On a maximum applied stress basis, the room temperature tension-tension specimens had longer fatigue lives than the room …

Go to article

Influence Of Embedded Optical Fibers On Compressive Strength Of Advanced Composites, Stefan B. Dosedel Dec 1993

Influence Of Embedded Optical Fibers On Compressive Strength Of Advanced Composites, Stefan B. Dosedel

Theses and Dissertations

This study investigated the effects of embedding optical fibers into advanced composite materials. This combination was meant to simulate 'smart structures' that have been shown to sense several different variables in the composite including strain, temperature, and damage. A laminate orientation taken from an existing aircraft structure was used to fabricate sixteen groups of specimens which were subjected to compression testing in an IITRI fixture to determine the ultimate compressive strength and modulus of elasticity. Ten of these groups were fabricated with optical fibers while the other six were control groups and contained no optical fibers. This study showed that …

Go to article

Investigation Of Compressive Behavior For Metal Matrix Composites With A Circular Hole, Janet L. Gooder Dec 1993

Investigation Of Compressive Behavior For Metal Matrix Composites With A Circular Hole, Janet L. Gooder

Theses and Dissertations

This study investigated the notched and unnotched macromechanical response due to micromechanical behavior of [0/±45/90]S SCS-6/β 21 S and [0/90] 2S Sigma/β 21S subjected to static compressive loads at room temperature. The stress-strain behavior and mechanical response in the presence of a circular hole was examined. A clear description of the progressive nature of damage, which ultimately resulted in failure, was provided. The effect of elevated temperature was shown for SCS-6/β 21S. The ultimate compressive strength and elastic modulus were reported for both MMCs. Sigma/β 21S and SCS-6/β 21S were mildly notch sensitive at room temperature. Notch sensitivity of …

Go to article

Fatigue Behavior Of A Cross-Ply Ceramic Matrix Composite Under Strain Controlled Tension-Tension And Tension-Compression Loading, James J. Gudaitis Dec 1993

Fatigue Behavior Of A Cross-Ply Ceramic Matrix Composite Under Strain Controlled Tension-Tension And Tension-Compression Loading, James J. Gudaitis

Theses and Dissertations

This stuidy investigates the fatigue response of a cross-ply [0/90]2s Nicalon/Calcium Aluminosillicate (Nicalcc/CAS) ceramic matrix composite at room temperature under strain controlled tension-tension and tension-compression fatigue loading. The primary objectives were to determine strain fatigue limits for both loading cases and to complete a fatigue life diagram (Δe-N) for all tests. Failure mechanisms were also studied. The average initial modulus value for this lay-up was 120 GPa. The ultimate tensile strain was 0.00988 mn/mm (285 MPa). Eight tests were conducted with maximum strains that ranged from 0.00300 mm/mm to 0.00722 mm/mm. The tension-tension fatigue limit was found to be …

Go to article

Nonlinear Large Deformation Theory Of Composite Arches Using Truncated Rotations, Daniel A. Miller Ii Dec 1993

Nonlinear Large Deformation Theory Of Composite Arches Using Truncated Rotations, Daniel A. Miller Ii

Theses and Dissertations

This research has been directed toward capturing large cross sectional rotation during bending of composite arches. A potential energy based nonlinear finite element model that incorporates transverse shear strain was modified to include large bending rotations. Large rotation kinematics were derived in a vector format leading to nonlinear strain that was decomposed into convenient forms for inclusion in the potential energy function. Problem discretization resulted in a finite element model capable of large deformations. Riks method and displacement control solution techniques were used. Numerous problems and examples were compared and analyzed. Code vectorization and parallelization were briefly examined to improve …

Go to article

Fatigue Behavior Of A Cross-Ply Ceramic Matrix Composite At Elevated Temperatures Under Tension-Tension Loading, Richard J. Tuznik Dec 1993

Fatigue Behavior Of A Cross-Ply Ceramic Matrix Composite At Elevated Temperatures Under Tension-Tension Loading, Richard J. Tuznik

Theses and Dissertations

A study was conducted which investigated the behavior of a Nicalon/ Calcium-Aluminosilicate (Nicalon/CAS) cross-ply [0/90]2S ceramic matrix composite at elevated temperatures under tension-tension fatigue loading. Tension-tension fatigue tests were performed with a load ratio of R = 0.10 and a frequency of 10 Hertz at 700°C and 850°C. These results were compared to results from a previous study conducted at room temperature. Material behavior and damage was recorded by fatigue life curves, elastic modulus' maximum and minimum strain, acetate replication techniques, and post-mortem fractography. Analysis of these results showed identical matrix dominated damage behavior at RT and 700°C. Ultimate …

Go to article

Experimental Analysis Of Heat Transfer Characteristics And Pressure Drop Through Screen Regenerative Heat Exchangers, Jeffrey L. Wiese Dec 1993

Experimental Analysis Of Heat Transfer Characteristics And Pressure Drop Through Screen Regenerative Heat Exchangers, Jeffrey L. Wiese

Theses and Dissertations

This study investigated the effect on heat transfer and friction characteristics for screen regenerative heat exchangers with the screen thickness reduced by rolling. The experiments were performed on 250 and 325 mesh, 304 stainless steel screen using helium gas. Reynolds numbers, based on hydraulic radius, Re, were between 10 and 100. Both the Colburn factor, StPr2/3, and friction factor, f, decreased as the screen thickness was reduced. A correlation was found for predicting friction factor, f. The drag coefficient per screen remained nearly unchanged for thicknesses reduced not more than 30 percent. The decrease in Colburn factor was …

Go to article

Electrical Properties Of P-Type Gainp2, Roy S. Calfas Dec 1993

Electrical Properties Of P-Type Gainp2, Roy S. Calfas

Theses and Dissertations

The GaInP2 n+—p junction diode has recently become important to the development of high efficiency GaInP2GaAs dual junction solar cells, which have a demonstrated air mass 1.5 conversion efficiencies in excess of 27. In order to study the effects of long term exposure to the space environment, the GaInP2 n+—p junction diodes were irradiated with a 1 MeV electron beam with a fluence of 1016 electrons/cm2. Since little is known about deep level defects traps in GaInP2, a deep level transient spectroscopy DLTS study was made to characterize the …

Go to article

The Effects Of Optical Feedback On Polarization Of Vertical Cavity Surface Emitting Lasers, Gregory J. Vansuch Dec 1993

The Effects Of Optical Feedback On Polarization Of Vertical Cavity Surface Emitting Lasers, Gregory J. Vansuch

Theses and Dissertations

Vertical Cavity Surface Emitting Lasers VCSELs are a type of semiconductor laser with a cavity oriented orthogonally to the planes of material growth. These lasers differ from conventional edge emitting lasers in several important ways. They have symmetric output beams and they are easily built into two dimensional arrays, making them very attractive as photonic components. The characteristic of interest in this thesis is polarization. While the asymmetric cavities of edge emitters exhibit a clear preference for light polarized in a particular direction, the cylindrically symmetric cavity of a VCSEL has no clear preference. Therefore, it should be relatively easy …

Go to article

A Nonlinear Three-Dimensional Micromechanics Model For Fiber-Reinforced Laminated Composites, David D. Robertson Nov 1993

A Nonlinear Three-Dimensional Micromechanics Model For Fiber-Reinforced Laminated Composites, David D. Robertson

Theses and Dissertations

In this study, a three-dimensional micromechanics model is developed. The present capabilities of the model include both unidirectional and laminated composite layups with various types of nonlinear analysis such as a thermoelastic-plastic analysis employing the Prandtl-Reuss flow relations, a thermoviscoplastic analysis using Bodner-Partom unified constitutive theory, and an interfacial damage progression scheme based on a statistical interfacial failure criteria. Such nonlinearities are critical factors during thermomechanical fatigue TMF loading of high temperature composites. Solutions were obtained and extensive comparisons performed with existing micromechanics models, finite element analysis, and experiment with excellent results. In addition, the analysis was developed to require …

Go to article

Characterization Of Fatigue Damage In A Metal Matrix Composite (Scs-6/ Ti-15-3) At Elevated Temperature, Brian P. Sanders Nov 1993

Characterization Of Fatigue Damage In A Metal Matrix Composite (Scs-6/ Ti-15-3) At Elevated Temperature, Brian P. Sanders

Theses and Dissertations

The fatigue characteristics of a unidirectional titanium based metal matrix composite (MMC) were investigated at elevated temperature (427°C). A hybrid strain controlled loading mode was used to subject the 0° and 90° laminas to fatigue. Along with the fatigue tests, microscopy and analytical modeling ware also conducted. This combination of activities led to defining the initiation and progression of damage and deformation in the MMC. Hen loading was parallel to the fiber on, the fatigue behavior was initially dominated by creep deformation of the matrix. Then, depending on the maximum strain, specimen failure was the result either fiber fractures or …

Go to article

Photoluminescence Spectroscopy Of Zinc Germanium Diphosphide (Zngep2), Jack E. Mccrae Sep 1993

Photoluminescence Spectroscopy Of Zinc Germanium Diphosphide (Zngep2), Jack E. Mccrae

Theses and Dissertations

Zinc germanium diphosphide (ZnGeP2) is a chalcopyrite semiconductor with strong nonlinear optical properties and potential application to Air Force interests. The characteristics of this material have been studied using photoluminescence (PL) spectroscopy. The PL spectrum is dominated by transitions from the conduction band to a deep acceptor level, and features in the spectrum suggest that more than one transition is being observed. The PL is partially polarized, and the degree of polarization appears to differ for each feature in the spectrum. The relative PL intensity of these features are seen to depend upon the wavelength of the excitation …

Go to article

Design And Performance Evaluation Of A Gas Chromatograph Micromachined In A Single Crystal Silicon Substrate, Rocky R. Reston Mar 1993

Design And Performance Evaluation Of A Gas Chromatograph Micromachined In A Single Crystal Silicon Substrate, Rocky R. Reston

Theses and Dissertations

This investigation designed and developed a miniature gas chromatograph (GC) using silicon micromachining techniques. The GC is composed of a miniature sample injector (10 µl sample loop); a 0.9 m long, rectangular-shaped (300 µm width and 10 micrometers height) capillary column coated with a 0.2 µm thick copper phthalocyanine (CuPc) stationary phase; and a dual-detector scheme incorporating a CuPc-coated chemiresistor and a 125 µm diameter thermal conductivity detector bead. Micromachining was employed to fabricate the sample injector interface, the GC column, and the dual-detector cavity. A novel processing technique was developed to sublime the CuPc stationary phase coating on the …

Go to article

Luminescence Study Of Ion-Implanted And Mbe-Grown Er-Doped Gaas And AlXGa1-XAs, Jose E. Colon Mar 1993

Luminescence Study Of Ion-Implanted And Mbe-Grown Er-Doped Gaas And AlXGa1-XAs, Jose E. Colon

Theses and Dissertations

The excitation and de-excitation mechanisms of the 1.54 microns emissions, from ion implanted and MBE grown GaAs:Er and AlxGa1-xAs:Er, were studied through luminescence experiments. Experimental techniques included photoluminescence, time resolved photoluminescence, and selective excitation photoluminescence. The Er3+ emissions were studied as a function of Er concentration, aluminum mole friction, n- and p-type doping level, and annealing temperature. In addition oxygen co-doping studies were done in order to determine the role played by oxygen in the Er3+ luminescence.

Go to article

An Investigation Of Graphite Peek Composite Under Compression With A Centrally Located Circular Discontinuity, Benjamin Wham Ii Mar 1993

An Investigation Of Graphite Peek Composite Under Compression With A Centrally Located Circular Discontinuity, Benjamin Wham Ii

Theses and Dissertations

The purpose of this thesis was to determine (both experimentally and analytically) the initiation and progression of failure, stress-strain response, and the failure loads of Graphite/Polyetheretherketone (Gr/PEEK) laminates, incorporating a centrally located circular discontinuity, loading in axial compression at room temperature. The laminates studied were (0°)16,(90°)16, (0°/90°)4S, (± 45°)4S, and (0°/±45°/90°)2S. The specimens were loaded within a Boeing Open Hole Compression Fixture. The micromechanical failure modes were identified using a Scanning Electron Microscope. The analytical progression of failure was predicted using a nonlinear finite element code developed by Dr. R.S. …

Go to article

Excitation And De-Excitation Mechanisms Of Er-Doped Gaas And Algaas, David W. Elsaesser Dec 1992

Excitation And De-Excitation Mechanisms Of Er-Doped Gaas And Algaas, David W. Elsaesser

Theses and Dissertations

Electrical and optical characterization have been performed on GaAs and AlxGa1-xAs samples doped with Er either by ion implantation or during Molecular Beam Epitaxial (MBE) growth. Deep Level Transient Spectroscopy (DLTS) and Temperature-Dependent Hall Effect (TDH) measurements indicated the presence of two hole traps in Er-doped GaAs, at 35 and 360 meV above the valence band maximum. The former (shallower) center was thought to be due to Er substituting for a Ga atom (ErGa) and giving rise to an isoelectronic impurity potential. The second center was attributed to an Er atom occupying an interstitial …

Go to article

Investigation Of Fatigue Behavior In Notched Cross-Ply Titanium Metal Matrix Composite At Elevated Temperature, Robert P. Baker Dec 1992

Investigation Of Fatigue Behavior In Notched Cross-Ply Titanium Metal Matrix Composite At Elevated Temperature, Robert P. Baker

Theses and Dissertations

The objective of this research was to investigate the initiation and progression of damage which develops in notched (0/90)2S SCS-6/Ti-15-3 at elevated temperature. Testing consisted of a monotonic tensile test at 427°C followed by fatigue testing performed under load control with a stress ratio of 0.1 at a frequency of 10 Hz. A crack was defined to have initiated when it had attained a length greater than or equal to 0.124 mm. Crack initiation and progression was monitored by strain and modulus observations and visual inspection via telemicroscope. The cracks were recorded with edge and face replicas. Metallographic and …

Go to article

Behavior Of A Titanium Matrix Composite Under Quasi-Static Tensile And Compressive Loading, Keith L. Bearden Dec 1992

Behavior Of A Titanium Matrix Composite Under Quasi-Static Tensile And Compressive Loading, Keith L. Bearden

Theses and Dissertations

Quasi-Static tensile and compressive testing was performed on a unidirectional titanium matrix composite. The specific material was SCS-9/β 21S. The initial tensile and compressive modulus for both laminates was the same. The ninety degree laminate had a tensile and compressive modulus of 115.89 GPa. The zero degree laminate had a tensile and compressive modulus of 197.51 GPa. The ninety degree laminate exhibited a three stage stress/strain response in tension. The first stage is completely linearly elastic, however, partial debonding of the fiber from the matrix was observed. This partial debased did not effect the stress/strain response. The second stage is …

Go to article

Stratified Plate Model For Composite Plate Analysis, Richard A. Coveno Dec 1992

Stratified Plate Model For Composite Plate Analysis, Richard A. Coveno

Theses and Dissertations

This study continues the investigation of the stratified plate model for the analysis of composites plates. The strata theory models a composite plate as a stack of isotropic matrix and orthotropic, fiber dominated layers. Energy methods are used to derive a set of partial differential equations and boundary conditions as a function of the displacement. An assumed displacement field, of a polynomial in z and a Sine/Cosine function in x and y, generates a solution to a simply supported composite plate with cross plies. A cylindrical bending example is also solved with a polynomial in z and Sine/Cosine function in …

Go to article

Behavior Of A Quasi-Isotropic Ply Metal Matrix Composite Under Thermo-Mechanical And Isothermal Fatigue Loading, Karl A. Hart Dec 1992

Behavior Of A Quasi-Isotropic Ply Metal Matrix Composite Under Thermo-Mechanical And Isothermal Fatigue Loading, Karl A. Hart

Theses and Dissertations

This study investigated the behavior of the SCS6/Ti-15-3 metal matrix composite with a quasi-isotropic layup when tested under static and fatigue conditions. Specimens were subjected to in-phase and out-of-phase thermo- mechanical and isothermal fatigue loading. In-phase and isothermal loading produced a fiber dominated failure while the out-of-phase loading produced a matrix dominated failure. Also, fiber domination in all three profiles was present at higher maximum applied loads and al three profiles demonstrated matrix domination at lower maximum applied loads. Thus, failure is both profile dependent and load equipment. Additional analyses, using laminated plate theory, Halpin-Tsai equations, METCAN, and the Linear …

Go to article

Effect Of Thickness And Ply Layup On The Collapse Characteristics Of Cylindrical Composite Shells With Large Cutouts, James C. Hatfield Dec 1992

Effect Of Thickness And Ply Layup On The Collapse Characteristics Of Cylindrical Composite Shells With Large Cutouts, James C. Hatfield

Theses and Dissertations

This study involved a numerical and experimental investigation of the geometric instability(collapse loads/displacements) of vertically unsupported graphite/epoxy cylindrical shell panels undergoing axial compression. Symmetric quasi-isotropic and cross-ply laminates, with and without 4 X4 centralized cutouts, were investigated for three thicknesses:8,16,and 24 plies. The experimental data was compared to results from SHELL, a geometrically nonlinear finite-element computer program which incorporates a parabolic transverse shear strain distribution through the thickness. Good correlation was obtained for shells with large cutouts between the SHELL numerical data and the experimental results. This research verified that the SHELL program will provide good predictions of the collapse …

Go to article

Fatigue Behavior Of A Cross-Ply Ceramic Matrix Composite Under Tension-Tension And Tension-Compression Loading, Frank A. Opalski Dec 1992

Fatigue Behavior Of A Cross-Ply Ceramic Matrix Composite Under Tension-Tension And Tension-Compression Loading, Frank A. Opalski

Theses and Dissertations

A study was conducted which investigated the behavior of a cross-ply [0/90]2S Nicalon/Calcium-Aluminosilicate (Nicalon/CAS) ceramic matrix composite at room temperature under tension-compression fatigue loading. Material behavior and damage was recorded by stress-strain curves, elastic modulus, hysteretic energy density, and acetate replication techniques. Tension-tension fatigue tests at a load ratio R of 0.1 (R = σmin/σmax) were completed which determined that 140 MPa was the maximum stress allowable in which cycle runout (1,000,000 cycles) would occur. Above this value, transverse crack density increased with respect to cycles and failure ultimately occurred. Tension-compression tests were then performed …

Go to article

Open And Filled Hole Static Tensile Strength Characterization Of Metal Matrix Composite Scs-9/Β21s, Jacob T. Roush Dec 1992

Open And Filled Hole Static Tensile Strength Characterization Of Metal Matrix Composite Scs-9/Β21s, Jacob T. Roush

Theses and Dissertations

SCS-9/β21s has a reduced gauge thickness, in comparison with other metal matrix composites, due to a smaller diameter fiber. This reduced gauge thickness makes it an attractive candidate for the skin of hypersonic vehicles. Tensile testing of (0/90)2s and (O/±45/90)s laminates was performed at room temperature, 482°C, and 650°C. Both notched and unnotched specimens were tested. Notched specimens, open and filled hole, had a width-to-diameter ratio of six. Materials 7075-T6 and Mar-m-246 were used as pins in the filled hole tensile testing. Analytical work was completed to predict material properties, elastic and plastic stress concentration factors, residual stresses, …

Go to article

Computational And Experimental Investigation Into Fracture Of Brittle Fiber - Brittle Matrix Composite Systems, James P. Solti Dec 1992

Computational And Experimental Investigation Into Fracture Of Brittle Fiber - Brittle Matrix Composite Systems, James P. Solti

Theses and Dissertations

Experimental and computational analyses provided an improved understanding of quasi-static fracture in model composite systems. Constant displacement compression tests using borosilicate glass double cleavage drilled compression test templates provided qualitative assessments of localized toughening for crack growth near cylindrical inclusions. Large crack-tip stress fields induced interfacial slip and separation prior to arrival of the main crack. Debonding and the proliferation of secondary matrix cracks characterized the role of bridging fibers along weak interfaces. Strong residual normal compressive interfacial stresses diminished the influence of crack-tip stresses; however, slip was still observed. VHS tape and computer enhanced photos record a history of …

Go to article

Behavior Of A Centrally Notched Cross-Ply And Unidirectional Ceramic Matrix Composite In Tension-Compression Fatigue, William A. Weidenaar Dec 1992

Behavior Of A Centrally Notched Cross-Ply And Unidirectional Ceramic Matrix Composite In Tension-Compression Fatigue, William A. Weidenaar

Theses and Dissertations

Centrally notched (hole), cross-ply, ((0/90)2)s, and unidirectional, (0)8 laminates of Silicon Carbide fiber-reinforced Aluminosilicate glass, SiC/1723, were fatigue tested under tension-compression loading with a load ratio of -1. Damage accumulated continuously for both lay- ups, leading to eventual failure and a reduced fatigue life. Critical damage in the cross-ply consisted of longitudinal cracks in the 90° plies growing and combining with transverse cracks to effectively eliminate the 90° plies' load carrying capability and allowing the specimen to buckle. Critical damage in the unidirectional lay-up consisted of longitudinal cracks which initiated at the shear stress concentration …

Go to article

First Prev Next Last