Open Access. Powered by Scholars. Published by Universities.®

Materials Science and Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Materials Science and Engineering Faculty Research & Creative Works

Discipline
Keyword
Publication Year

Articles 721 - 750 of 1006

Full-Text Articles in Materials Science and Engineering

Structural Disorder And The Origin Of High-Tc Suppression In La1.875ba0.125cuo4, Daniel Haskel, Edward A. Stern, Fatih Dogan, Arnie R. Moodenbaugh Nov 1999

Structural Disorder And The Origin Of High-Tc Suppression In La1.875ba0.125cuo4, Daniel Haskel, Edward A. Stern, Fatih Dogan, Arnie R. Moodenbaugh

Materials Science and Engineering Faculty Research & Creative Works

Polarized x-ray absorption fine structure (XAFS) measurements at all La, Pa and Cu sites were used to study local structural features that accompany the strong Tc suppression at x similar to 1/8 in La2-xBaxCuO6. Two critical parameters regulating the strength of hole-lattice coupling in this material were determined, i.e., the direction and magnitude of CuO6 octahedra local tilts. Our findings include the existence of large disorder in the magnitude of the tilt angle about its average value {theta}, with an rms {radical}{delta} {theta}{sup 2}] {approx_equal} 2{theta}. We suggest that this large disorder …

Go to article

Charge Fluctuations In Yba2cu3o7-X High-Temperature Superconductors, Herbert A. Mook, Fatih Dogan Sep 1999

Charge Fluctuations In Yba2cu3o7-X High-Temperature Superconductors, Herbert A. Mook, Fatih Dogan

Materials Science and Engineering Faculty Research & Creative Works

Understanding the behavior of the electrons in the high-temperature copper oxide superconductors remains a challenging problem. An important class of models1,2,3,4,5 argues that the distribution of electronic charge and spin is not homogeneous: rather, spin and charge adopt a dynamic arrangement in which the spins on the copper form antiferromagnetic stripes, separated by domain walls containing the charge1,2,3,4,5. The dynamic behavior of the spins has been extensively studied by neutron scattering, and recent results have shown that the low-frequency fluctuations for different classes of materials display a universal spatial behavior that is consistent with the stripe picture. But arguments for …

Go to article

The Weights Of Various Features In The Magnetic Spectra Of Cuprates, G. Aeppli, S. M. Hayden, Pengcheng Dai, Herbert A. Mook, R. D. Hunt, T. G. Perring, Fatih Dogan Sep 1999

The Weights Of Various Features In The Magnetic Spectra Of Cuprates, G. Aeppli, S. M. Hayden, Pengcheng Dai, Herbert A. Mook, R. D. Hunt, T. G. Perring, Fatih Dogan

Materials Science and Engineering Faculty Research & Creative Works

We review briefly the magnetic fluctuation spectra, obtained by neutron scattering, of the high temperature superconductor YBa2Cu3O6.6 (Tc = 62.7 K). The resonance at 34 meV is the most prominent spectral feature in the superconducting state. Even so, its net weight accounts for a mere 1% of the total squared moment expected for planar Cu2+ ions. For context, we also provide a discussion of the spectral weights associated with the magnetic order and spin waves in two-dimensional S = 1/2 Heisenberg antiferromagnets.

Go to article

Models For Magnetoresistance In Tunnel Junctions, Shi C. Zhang, P. M. Levy Aug 1999

Models For Magnetoresistance In Tunnel Junctions, Shi C. Zhang, P. M. Levy

Materials Science and Engineering Faculty Research & Creative Works

We show there are putative pitfalls when one predicts the magnetoresistance of magnetic tunnel junctions (JMR) based on different toy models. Amongst them are the sensitivity of the MR to the details of the profile of the potential barrier between the metallic electrodes and the insulating barrier, and the common assumption of only one band of electrons. We indicate the ingredients that are necessary to obtain a more complete description of the JMR of magnetic tunnel junctions.

Go to article

The Effect Of Platinum And Excess 211 Phase On The Loss Of The Liquid Phase In Melt Textured Yba2cu3o7-X, William C. Hicks, Fatih Dogan, M. Strasik, A. C. Day, Kevin E. Mccrary Jun 1999

The Effect Of Platinum And Excess 211 Phase On The Loss Of The Liquid Phase In Melt Textured Yba2cu3o7-X, William C. Hicks, Fatih Dogan, M. Strasik, A. C. Day, Kevin E. Mccrary

Materials Science and Engineering Faculty Research & Creative Works

Platinum is an important additive in YBa2Cu3O7-x [123] powders for melt processing and growth of large, oriented crystals, but its role in liquid loss during the growth cycle is poorly understood. A series of experiments were conducted to determine how platinum effects liquid loss, and to study the solubility limit of platinum in 123. Both atomically mixed and solid state platinum sources were compared. Crystals were grown on a nonreactive setter so that liquid loss could be clearly distinguished by weight from reaction products with the setter. Based on weight loss studies there was little …

Go to article

The Effect Of Platinum And Excess 211 Phase On The Loss Of The Liquid Phase In Melt Textured Yba₂Cu₃O₇₋ₓ, William C. Hicks, Fatih Dogan, Michael Strasik, Arthur C. Day, Kevin E. Mccrary Jun 1999

The Effect Of Platinum And Excess 211 Phase On The Loss Of The Liquid Phase In Melt Textured Yba₂Cu₃O₇₋ₓ, William C. Hicks, Fatih Dogan, Michael Strasik, Arthur C. Day, Kevin E. Mccrary

Materials Science and Engineering Faculty Research & Creative Works

Platinum is an important additive in YBa2Cu3O7-x [123] powders for melt processing and growth of large, oriented crystals, but its role in liquid loss during the growth cycle is poorly understood. A series of experiments were conducted to determine how platinum effects liquid loss, and to study the solubility limit of platinum in 123. Both atomically mixed and solid state platinum sources were compared. Crystals were grown on a nonreactive setter so that liquid loss could be clearly distinguished by weight from reaction products with the setter. Based on weight loss studies there was little …

Go to article

Oxygen And Phosphorus Coordination Around Iron In Crystalline Ferric Ferrous Pyrophosphate And Iron-Phosphate Glasses With Uo₂ Or Na₂O, C. H. Booth, P. G. Allen, J. J. Bucher, N. M. Edelstein, D. K. Shuh, G. K. Marasinghe, Mevlüt Karabulut, C. S. Ray, D. E. Day Jun 1999

Oxygen And Phosphorus Coordination Around Iron In Crystalline Ferric Ferrous Pyrophosphate And Iron-Phosphate Glasses With Uo₂ Or Na₂O, C. H. Booth, P. G. Allen, J. J. Bucher, N. M. Edelstein, D. K. Shuh, G. K. Marasinghe, Mevlüt Karabulut, C. S. Ray, D. E. Day

Materials Science and Engineering Faculty Research & Creative Works

Fe K-edge x-ray absorption fine-structure (XAFS) measurements were performed on glass samples of (Fe3O4)0.3(P2O5)0.7 with various amounts of Na2O or UO2. Near-edge and extended-XAFS regions are studied and comparisons are made to several reference compounds. We find that iron in the base glass is ~25% divalent and that the Fe2+ coordination is predominantly octahedral, while Fe3+ sites are roughly split between tetrahedral and octahedral coordinations. Also, we measure roughly one FeñOñP link per iron. Substitution of Na2O or UO2 up to 15 mo1% primarily affects the first FeñO shell. The results are compared to data from the related material Fe3(P2O7)2.

Go to article

The Magnetic Excitation Spectrum And Thermodynamics Of High-Tc Superconductors, Pengcheng Dai, Herbert A. Mook, Stephen M. Hayden, Toby G. Perring, Gabriel Aeppli, Rodney Dale Hunt, Fatih Dogan May 1999

The Magnetic Excitation Spectrum And Thermodynamics Of High-Tc Superconductors, Pengcheng Dai, Herbert A. Mook, Stephen M. Hayden, Toby G. Perring, Gabriel Aeppli, Rodney Dale Hunt, Fatih Dogan

Materials Science and Engineering Faculty Research & Creative Works

Inelastic neutron scattering was used to study the wave vector– and frequency dependent magnetic fluctuations in single crystals of superconducting YBa2Cu3O6+x. The spectra contain several important features, including a gap in the superconducting state, a pseudo gap in the normal state, and the much-discussed resonance peak. The appearance of the pseudo gap determined from transport and nuclear resonance coincides with formation of the resonance in the magnetic excitations. The exchange energy associated with the resonance has the temperature and doping dependences as well as the magnitude to describe approximately the electronic specific heat near …

Go to article

The Magnetic Excitation Spectrum And Thermodynamics Of High-Tc Superconductors, Pengcheng Dai, Herbert A. Mook, Stephen M. Hayden, Gabriel Aeppli, Toby G. Perring, Rodney Dale Hunt, Fatih Dogan May 1999

The Magnetic Excitation Spectrum And Thermodynamics Of High-Tc Superconductors, Pengcheng Dai, Herbert A. Mook, Stephen M. Hayden, Gabriel Aeppli, Toby G. Perring, Rodney Dale Hunt, Fatih Dogan

Materials Science and Engineering Faculty Research & Creative Works

Inelastic neutron scattering was used to study the wave vector– and frequency dependent magnetic fluctuations in single crystals of superconducting YBa2Cu3O6+x. The spectra contain several important features, including a gap in the superconducting state, a pseudo gap in the normal state, and the much-discussed resonance peak. The appearance of the pseudo gap determined from transport and nuclear resonance coincides with formation of the resonance in the magnetic excitations. The exchange energy associated with the resonance has the temperature and doping dependences as well as the magnitude to describe approximately the electronic specific heat near …

Go to article

Structural Disorder And The Origin Of High-Tc Suppression In La1.875ba0.125cuo4−Δ, Daniel Haskins, Edward A. Sterns, Fatih Dogan, Arnie R. Moodenbaugh May 1999

Structural Disorder And The Origin Of High-Tc Suppression In La1.875ba0.125cuo4−Δ, Daniel Haskins, Edward A. Sterns, Fatih Dogan, Arnie R. Moodenbaugh

Materials Science and Engineering Faculty Research & Creative Works

Polarized x-ray absorption fine structure (XAFS) measurements at all La, Ba and Cu sites were used to study local structural features that accompany the strong Tc suppression at x ~ 1/8 in La2-xBaxCuO4. Two critical parameters regulating the strength of hole-lattice coupling in this material were determined, i.e., the di- rection and magnitude of CuO6 octahedra local tilts. Our findings include the existence of large disorder in the magnitude of the tilt angle about its average value < 0>, with a rms (formula presented) ≈2< 0>. We suggest that this large disorder strongly …

Go to article

Why Does Ni Suppress Superconductivity In La1.85sr0.15cu1−Yniyo4?, Daniel Haskel, Edward A. Stern, V. Polinger, Fatih Dogan May 1999

Why Does Ni Suppress Superconductivity In La1.85sr0.15cu1−Yniyo4?, Daniel Haskel, Edward A. Stern, V. Polinger, Fatih Dogan

Materials Science and Engineering Faculty Research & Creative Works

The role played by Ni impurities in destroying the superconducting state of La2-xSrxCuO4 is still unclear. This is partly due to the lack of clear experimental evidence on the effect of Ni substitution upon the atomic and electronic structure of this cuprate. To provide this information, we performed Ni /(-edge polarized XAFS measure-ments on oriented powder. A special magnetic alignment geometry allowed us to measure pure ~ and aAb-polarized XAFS in identical experimental conditions. We found that the NiO6 octahedra are contracted along the t-axis by 0.16(A) relative to the CuO6 octahedra in Lal.~sSro.~sCuO4, …

Go to article

Evaluation Of Lead Anode Reactions In Acid Sulfate Electrolytes. I. Lead Alloys With Cobalt Additives, Pu Yu, Thomas J. O'Keefe Apr 1999

Evaluation Of Lead Anode Reactions In Acid Sulfate Electrolytes. I. Lead Alloys With Cobalt Additives, Pu Yu, Thomas J. O'Keefe

Materials Science and Engineering Faculty Research & Creative Works

Lead alloys, such as lead-calcium-tin and lead-silver, are the primary insoluble anodes used in the electrowinning of metals. While some difficulties are encountered in their use, there is no obvious replacement that is economically and technically competitive. Two of the specific problems with lead include decreased cathode purity due to incorporation from corrosion products and the relatively high overpotential which increases cell voltage. To gain an improved understanding of the fundamental behavior of lead anodes, the polarization behavior of six different alloys in sulfuric acid was evaluated. Some tests were also made with Co(II) in the acid sulfate electrolyte. Notable …

Go to article

Preparation Of A Zro₂-Al₂O₃ Nanocomposite By High-Pressure Sintering Of Spray-Pyrolyzed Powders, Rajiv S. Mishra, V. Jayaram, B. Majumdar, C. E. Lesher, A. K. Mukherjee Mar 1999

Preparation Of A Zro₂-Al₂O₃ Nanocomposite By High-Pressure Sintering Of Spray-Pyrolyzed Powders, Rajiv S. Mishra, V. Jayaram, B. Majumdar, C. E. Lesher, A. K. Mukherjee

Materials Science and Engineering Faculty Research & Creative Works

ZrO2-Al2O3 powders were synthesized by spray pyrolysis. These powders were sintered at 1 GPa in the temperature range of 700Ç1100 ÉC. The microstructural evolution and densification are reported in this paper. The application of 1 GPa pressure lowers the crystallization temperature from ~850 to 700 ÉC. Similarly, the transformation temperature under 1 GPa pressure for <>g ê a Al2O3 reduces from ~1100 to 700Ç800 ÉC range, and that for t <>ê m ZrO2 reduces from ~1050 to 700Ç800 ÉC range. It was possible to ob-tain highly-dense nanocrystalline ZrO2-Al2O3 composite at temperatures as low as 700 ÉC. The effect of high …

Go to article

Band Gap Energy In Nanocrystalline Zro2:16%Y Thin Films, Igor Kosacki, Vladimir Petrovsky, Harlan U. Anderson Jan 1999

Band Gap Energy In Nanocrystalline Zro2:16%Y Thin Films, Igor Kosacki, Vladimir Petrovsky, Harlan U. Anderson

Materials Science and Engineering Faculty Research & Creative Works

The results of optical absorption measurements on nanocrystalline ZrO2:16%Y thin films are presented. Dense 0.7 μm thick films with 1-300 nm grain size have been obtained on sapphire substrate using a polymeric precursor spin coating technique. The relationship between the energy gap and microstructure of ZrO2:16%Y has been determined and discussed. The quantum confinement effect was observed at the grain size lower than 100 nm with the band gap energy shift of 0.25 eV when the microstructure was changed up to 1 nm. Some limitation of the model has been observed and discussed. The band gap energy of 5.62±0.05eV has …

Go to article

Copper Nucleation On Titanium For Thin Film Applications, A. J.B. Dutra, Thomas J. O'Keefe Jan 1999

Copper Nucleation On Titanium For Thin Film Applications, A. J.B. Dutra, Thomas J. O'Keefe

Materials Science and Engineering Faculty Research & Creative Works

Copper nucleation and growth on titanium substrates from concentrated acidic copper sulfate solutions was studied at 45 and 65 °C and high cathodic potentials. Electrochemical experiments allied to SEM examination were performed to characterize the mechanism of nucleation and its evolution with time. Particular emphasis was given to the influence of potential and agitation on the initial stages of nucleation and growth. Results indicated that most of copper nucleation on titanium from a 83 g dm-3 Cu2+ solution, at 65 °C, is achieved in a matter of milliseconds. As expected, the initial stages of the copper nucleation and growth is …

Go to article

Modeling The Dielectric Response And Relaxation Spectra Of Relaxor Ferroelectrics, Huh Tswen Lin, David C. Van Aken, Wayne Huebner Jan 1999

Modeling The Dielectric Response And Relaxation Spectra Of Relaxor Ferroelectrics, Huh Tswen Lin, David C. Van Aken, Wayne Huebner

Materials Science and Engineering Faculty Research & Creative Works

A multi-Debye relaxation model that is based upon the Boltzmann superposition principle has been used to determine the frequency-dispersion behavior of Pb (Mg1/3-Nb2/3)O3 (PMN) and Pb0.88La0.08 (Zr0.65Ti0.35) O3 (PLZT 8/65/35) relaxor ferroelectrics. For PMN, relaxation times on the order of seconds contribute to the dispersive character of the dielectric properties. A defect-relaxation mechanism that involves Mg cation hopping in a structure that is composed of interpenetrating 〈111〉 chains of ordered Pb (Mg1/2Nb1/2) O3 is proposed for PMN. Motion of the Mg cations …

Go to article

Influence Of Chemical Reactions In Magnesia-Graphite Refractories: I, Effects On Texture And High-Temperature Mechanical Properties, Carmen Baudín, Carlos Alvarez, Robert E. Moore Jan 1999

Influence Of Chemical Reactions In Magnesia-Graphite Refractories: I, Effects On Texture And High-Temperature Mechanical Properties, Carmen Baudín, Carlos Alvarez, Robert E. Moore

Materials Science and Engineering Faculty Research & Creative Works

Four formulations of magnesia-graphite-aluminum metal (antioxidant) bricks were prepared from the same raw materials, using the standard commercial practices. Chemical analysis and determination of room-temperature modulus of rupture and Young's modulus, as well as a complete microstructural characterization of the as-received materials, were performed. For high-temperature modulus-of-rupture and Young's modulus data, test samples of the four brick compositions were heated to 1000°, 1200°, and 1450 °C in flowing argon (< 1000 ppm oxygen at 1000 °C) and then loaded mechanically in flexure. Modulus-of-elasticity values ranged from 3.7 to 16.2 GPa and reflected strong effects of aluminum-metal concentration and treatment temperature. Young's modulus evolution with temperature was determined by the evolution of the micro-structure in the bulk of the specimens. Modulus-of-rupture values ranged from 6 to 21 MPa, and their evolution with temperature was determined by the evolution of the micro-structure in the bulk of the specimens at the lower testing temperatures (T≤1200 °C) and by phase assemblages in the surface regions of the specimens - essentially by the presence of the dense MgO zone - at 1450 °C.

Go to article

Influence Of Chemical Reactions In Magnesia-Graphite Refractories: Ii, Effects Of Aluminum And Graphite Contents In Generic Products, Carmen Baudín, Carlos Alvarez, Robert E. Moore Jan 1999

Influence Of Chemical Reactions In Magnesia-Graphite Refractories: Ii, Effects Of Aluminum And Graphite Contents In Generic Products, Carmen Baudín, Carlos Alvarez, Robert E. Moore

Materials Science and Engineering Faculty Research & Creative Works

A group of magnesia-graphite and magnesia-graphite-aluminum materials, the compositions of which represent a wide range of graphite contents (approximately 10-16.4 wt.%), aluminum contents (0-5.2 wt.%), and MgO and graphite qualities, were fabricated, using standard commercial practices. Chemical analysis and determination of room-temperature modulus of rupture (MOR) and Young's modulus, as well as a complete microstructural characterization of the as-received materials, were performed. Mechanical characterization at high temperature (1000°, 1200°, and 1450 °C) was done in terms of Young's modulus and MOR in an argon atmosphere (°C). Modulus-of-elasticity values ranged from 4 to 16 GPa, and their evolution with temperature was …

Go to article

High Breakdown Strength, Multilayer Ceramics For Compact Pulsed Power Applications, Wayne Huebner, Brian L. Gilmore, Shi C. Zhang, Mike L. Krogh, B. C. Schultz, R. C. Pate, L. F. Rinehart, J. M. Lundstrom Jan 1999

High Breakdown Strength, Multilayer Ceramics For Compact Pulsed Power Applications, Wayne Huebner, Brian L. Gilmore, Shi C. Zhang, Mike L. Krogh, B. C. Schultz, R. C. Pate, L. F. Rinehart, J. M. Lundstrom

Materials Science and Engineering Faculty Research & Creative Works

Advanced ceramics are being developed for use in large area, high voltage devices in order to achieve high specific energy densities (greater than 10^6/ J/m^3/) and physical size reduction. Initial materials based on slip cast TiO2 exhibited a high bulk breakdown strength (BDS greater than 300 kV/cm) and high permittivity with low dispersion (epsilon approximately equal to 100). However, strong area and thickness dependencies were noted. To increase the BDS, multilayer dielectric compositions are being developed based on glass/TiO2 composites. The addition of glass increases the density (approximately equal to 99.8% theoretical), forms a continuous grain boundary phase, and also …

Go to article

Preparation Of Phase Homogeneous Mn-Zn Ferrite Powder By Spray Pyrolysis, Xinyu Zhao, Baicun Zheng, Hongchen Gu, Chunzhong Li, Shi C. Zhang, P. D. Ownby Jan 1999

Preparation Of Phase Homogeneous Mn-Zn Ferrite Powder By Spray Pyrolysis, Xinyu Zhao, Baicun Zheng, Hongchen Gu, Chunzhong Li, Shi C. Zhang, P. D. Ownby

Materials Science and Engineering Faculty Research & Creative Works

Two kinds of aqueous precursor solutions are used to synthesize Mn-Zn ferrite powders: (i) nitrate (NO) precursor-derived from solutions of Mn(NO3)2, Zn(NO3)2, and Fe(NO3)3; and (ii) acetate (AC) precursor-derived from solutions of Mn(CH3COOO)2, Zn(CHCH3COOO)2, and Fe(NO3)3. The composition of the powders synthesized from the precursor AC is very uniform, whereas powders derived from the precursor NO have Mn and Zn segregated on the particle surfaces. In addition, the powders synthesized from precursor AC are solid spherical …

Go to article

Measurement Of The Dielectric Strength Of Titanium Dioxide Ceramics, Wayne Huebner, J. M. Lundstrom, L. F. Rinehart, R. C. Pate, T. L. Smith, Mike L. Krogh Jan 1999

Measurement Of The Dielectric Strength Of Titanium Dioxide Ceramics, Wayne Huebner, J. M. Lundstrom, L. F. Rinehart, R. C. Pate, T. L. Smith, Mike L. Krogh

Materials Science and Engineering Faculty Research & Creative Works

Titanium dioxide ceramics (TiO2) are candidate materials for high energy density pulsed power devices. Experiments to quantify the dielectric strength of TiO2 have been performed on a limited number of unoptimized samples. A high voltage test set was constructed to test the titanium dioxide. All samples had a relative dielectric constant of 100, all samples were of 3 mm nominal thickness, and all tests were performed in water dielectric to reduce the effect of the triple point field enhancement at the electrode edge. Both single layer and laminated samples were tested and the breakdown field strengths were recorded. Voltage risetimes …

Go to article

Structural Disorder And The Origin Of High-Tc Suppression In La₁.₈₇₅Ba₀.₁₂₅ Cuo4−Δ, Daniel Haskel, Edward A. Stern, Fatih Dogan, Arnie R. Moodenbaugh Jan 1999

Structural Disorder And The Origin Of High-Tc Suppression In La₁.₈₇₅Ba₀.₁₂₅ Cuo4−Δ, Daniel Haskel, Edward A. Stern, Fatih Dogan, Arnie R. Moodenbaugh

Materials Science and Engineering Faculty Research & Creative Works

Polarized x-ray absorption fine structure (XAFS) measurements at all La, Ba and Cu sites were used to study local structural features that accompany the strong Tc suppression at: r,,, 1/8 in La2BaCuO4. Two critical parameters regulating the strength of hole-lattice coupling in this material were determined, ie, the direction and magnitude of CuO6 octahedra local tilts. Our findings include the existence of large disorder in the magnitude of the tilt angle about its average value (0), with an rms~~ 2 (0). We suggest that this large disorder strongly scatters a large fraction of states at …

Go to article

Vacancy Clustering In Quenched Al-Li Solid Solution Alloys Studied By Doppler Broadening Spectroscopy, Hollis P. Leighly, P. G. Coleman Nov 1998

Vacancy Clustering In Quenched Al-Li Solid Solution Alloys Studied By Doppler Broadening Spectroscopy, Hollis P. Leighly, P. G. Coleman

Materials Science and Engineering Faculty Research & Creative Works

The clustering of vacancies in severely quenched Al-Li solid solution alloys, with Li content between 230 and 2760 ppm, has been studied using Doppler broadening spectroscopy. The alloy samples were initially annealed at 873 K in dry air or dry, pure nitrogen. The onset temperature for vacancy clustering in samples initially annealed in air was found to be 150 ± 10 K, 40 ± 15 K lower than for the nitrogen-annealed samples. This result is consistent with the migration of divacancies, formed as a result of the significant increase in vacancy concentration caused by Li migration to, and oxidation at, …

Go to article

Specific Heat And Transport “Anomalies” In Mixed Alkali Glasses, Peter F. Green, Richard K. Brow, James J. Hudgens Nov 1998

Specific Heat And Transport “Anomalies” In Mixed Alkali Glasses, Peter F. Green, Richard K. Brow, James J. Hudgens

Materials Science and Engineering Faculty Research & Creative Works

We show that changes in the relative mole fractions of Li2O and Na2O in alkali metaphosphate glasses lead to “anomalies” in the specific heat and structural relaxations. The heat capacity change between the liquid and glassy states, Δcp(Tg), at the calorimetric glass transition temperature, Tg, exhibits a minimum when the mole fractions of Li2O and Na2O are comparable. Moreover, systematic changes in the temperature dependence of the viscosity, η, i.e., changes in the “fragility” of the system, accompany these changes in mole fraction. This observed dependence …

Go to article

Neuron Scattering Studies Of The Magnetic Fluctuations In Yba2cu3o7−Δ, Herbert A. Mook, Pengcheng Dai, Rodney Dale Hunt, Fatih Dogan Oct 1998

Neuron Scattering Studies Of The Magnetic Fluctuations In Yba2cu3o7−Δ, Herbert A. Mook, Pengcheng Dai, Rodney Dale Hunt, Fatih Dogan

Materials Science and Engineering Faculty Research & Creative Works

Neutron scattering measurements were made on the spin fluctuations in YBa2Cu3O7−δ for different oxygen doping levels. Incommensurability is clearly observed for oxygen concentrations of 6.6 and 6.7 and is suggested for the 6.93. Measurements of the resonance for the O6.6 concentration show that it exists in a broadened and less intense form at temperatures much higher than Tc.

Go to article

Mixed Electron Emission From Doped Pb(Zr,Ti)O₃ Ceramics: Microstructural Aspects, Weiming Zhang, Wayne Huebner Jun 1998

Mixed Electron Emission From Doped Pb(Zr,Ti)O₃ Ceramics: Microstructural Aspects, Weiming Zhang, Wayne Huebner

Materials Science and Engineering Faculty Research & Creative Works

A mixed type electron emission, i.e., simultaneous ferroelectric and plasma emission, was observed with a negative driving pulse applied to doped Pb(Zr,Ti)O3 ceramics in the absence of any external potential on the electron collector. During these emission studies, significant microstructural changes on the emission surface were observed, and corresponded to the different emission modes. Erosion craters at the edge of the electrode and small particles near these craters reflected the formation of a dense plasma there. Comparatively, cavities, i.e., grain pullouts, accumulated on the bare ferroelectric surface, the frequency of which depended upon its distance from the grid. This …

Go to article

Mixed Electron Emission From Lead Zirconate-Titanate Ceramics, Weiming Zhang, Wayne Huebner, Stephen E. Sampayan, Mike L. Krogh Jun 1998

Mixed Electron Emission From Lead Zirconate-Titanate Ceramics, Weiming Zhang, Wayne Huebner, Stephen E. Sampayan, Mike L. Krogh

Materials Science and Engineering Faculty Research & Creative Works

Simultaneous ferroelectric and plasma emission from Pb(Zr,Ti)O3 was observed with only a negative driving pulse applied to the sample, and without an extraction potential on the electron collector. Plasma emission was a strong, inconsistent, and self-destructive process. In addition, a positive ion current was detected. Comparatively, ferroelectric emission was a relatively stable self-emission process, exhibiting no apparent delay time, and no positive ion current. The relationship between the switching and emission current of ferroelectric samples measured simultaneously cannot only be used to determine the existence of ferroelectric emission, but can also give direction to choosing suitable ferroelectric materials for …

Go to article

Iron Phosphate Compositions For Containment Of Hazardous Metal Waste, D. E. Day May 1998

Iron Phosphate Compositions For Containment Of Hazardous Metal Waste, D. E. Day

Materials Science and Engineering Faculty Research & Creative Works

An improved iron phosphate waste form for the vitrification, containment and long-term disposition of hazardous metal waste such as radioactive nuclear waste is provided. The waste form comprises a rigid iron phosphate matrix resulting from the cooling of a melt formed by heating a batch mixture comprising the metal waste and a matrix-forming component. The waste form comprises from about 30 to about 70 weight percent P205 and from about 25 to about 50 weight percent iron oxide and has metals present in the metal waste chemically dissolved therein. The concentration of iron oxide in the waste form along with …

Go to article

Regarding The Correlation Of Nuclear Spin Relaxation And Electrical Conductivity Relaxation In Ionic Glasses, David L. Sidebottom, Peter F. Green, Richard K. Brow Apr 1998

Regarding The Correlation Of Nuclear Spin Relaxation And Electrical Conductivity Relaxation In Ionic Glasses, David L. Sidebottom, Peter F. Green, Richard K. Brow

Materials Science and Engineering Faculty Research & Creative Works

Much attention has been focused recently on the apparent differences between ion dynamics in ion-containing glasses as probed by electrical conductivity relaxation (ECR) and by nuclear spin relaxation (NSR) techniques. In both relaxation processes, a power law frequency dependence is observed. Based upon fluctuation-dissipation arguments, the power law exponents should be equivalent. However, experimentally, it appears that the conductivity exponent is generally smaller than the NSR exponent. While an explanation for this discrepancy based upon fundamental differences in the correlation functions probed by the two techniques has been proffered, we show how this discrepancy may simply arise from differing analyses …

Go to article

Incommensurate Magnetic Fluctuations In Yba2⁢Cu3⁢O6.6, Pengcheng Dai, Herbert A. Mook, Fatih Dogan Feb 1998

Incommensurate Magnetic Fluctuations In Yba2⁢Cu3⁢O6.6, Pengcheng Dai, Herbert A. Mook, Fatih Dogan

Materials Science and Engineering Faculty Research & Creative Works

We use inelastic neutron scattering to demonstrate that the low-frequency magnetic fluctuations in YBa2Cu3O6.6 (Tc= 62.7 K) change from commensurate to incommensurate on cooling with the incommensurability first appearing at temperatures above Tc. For the energies studied, the susceptibility at incommensurate positions increases on cooling below Tc, accompanied by a suppression of the spin fluctuations at the commensurate points. These results suggest that incommensurate spin fluctuations may be a common feature for all cuprate superconductors.

Go to article

First Prev Next Last