Open Access. Powered by Scholars. Published by Universities.®
Materials Science and Engineering Commons™
Open Access. Powered by Scholars. Published by Universities.®
- Discipline
- Keyword
-
- Electrocatalysis (65)
- Oxygen reduction reaction (65)
- Electrodeposition (63)
- Cyclic voltammetry (58)
- Lithium ion battery (55)
-
- Supercapacitor (42)
- Corrosion (40)
- Electrochemical performance (38)
- Cathode material (36)
- Electrochemistry (33)
- Lithium-ion batteries (33)
- Fuel cell (31)
- Lithium-ion battery (30)
- Electrochemical impedance spectroscopy (26)
- Modified electrode (26)
- Lithium ion batteries (24)
- Carbon nanotubes (23)
- Anode (21)
- Anode materials (20)
- Cathode (20)
- Electrolyte (20)
- Oxygen evolution reaction (20)
- Electrocatalyst (19)
- Lithium-sulfur batteries (19)
- Polyaniline (19)
- Anode material (18)
- Fuel cells (18)
- Hydrogen evolution reaction (18)
- EIS (17)
- Cathode materials (16)
- Publication Year
Articles 331 - 360 of 1823
Full-Text Articles in Materials Science and Engineering
Preparation And Characterization Of Cathode Supported Solid Oxide Fuel Cell, Xiao-Nan Bao, Guang-Jun Zhang, Shao-Rong Wang
Preparation And Characterization Of Cathode Supported Solid Oxide Fuel Cell, Xiao-Nan Bao, Guang-Jun Zhang, Shao-Rong Wang
Journal of Electrochemistry
A site deficient (La0.8Sr0.2)0.95MnO3 (LSM95) powder was synthesized by solid state reaction as a cathode material. The commercial Zr0.9Sc0.1SO1.95 (SSZ) was selected as an electrolyte material and La0.8Sr0.2Cr0.5Mn0.5O3- (LSCrM) was synthesized by sol-gel method as an anode material. Accordingly, single cells of LSCrM-CeO2|SSZ|3YSZ-LSM95 were prepared by tape casting, sintering and impregnation. The single cell test results for LSCrM-CeO2|SSZ|3YSZ-LSM95 with 0.11 g·cm -2 CeO2 and using CH4 as a fuel showed the power …
Perovskite Catalysts For Fuel Reforming In Sofc:A Review And Perspective, Tong Wei, Jian Li, Li-Chao Jia, Bo Chi, Jian Pu
Perovskite Catalysts For Fuel Reforming In Sofc:A Review And Perspective, Tong Wei, Jian Li, Li-Chao Jia, Bo Chi, Jian Pu
Journal of Electrochemistry
Solid oxide fuel cell (SOFC) is a generating device by electrochemical reaction to transfer the chemical energy of fossil fuels (coal, oil and gas, etc.), the biomass fuel or other hydrocarbon fuels directly into electricity with higher energy conversion efficiency and lower pollution, which is recognized to be efficient green energy technology in the 21st century. However, when hydrocarbons are directly used as fuel, carbon deposition is easy to occur in nickel-based anode, thus, losing electrochemical catalytic activity. Fuel pre-reforming on the outside of the anode is an effective solution, which strongly relies on highly efficient and stable reforming catalysts. …
Research Progress Of Fuel Electrode In Oxide-Ion Conducting Solid Oxide Electrolysers, Ling-Ting Ye, Kui Xie
Research Progress Of Fuel Electrode In Oxide-Ion Conducting Solid Oxide Electrolysers, Ling-Ting Ye, Kui Xie
Journal of Electrochemistry
Solid oxide electrolysers are now attracting much more attentions because they can efficiently produce fuels by electrolyzing H2O/CO2. In this paper, a comprehensive introduction to the recent progress in the development of fuel electrode (cathode) materials is provided. The advantages, disadvantages and development trend towards various cathode materials are pointed out. The key scientific and technological problems in this field are emphasized.
Research Progress In Ethane Dehydrogenation To Cogenerate Power And Value-Added Chemicals In Solid Oxide Fuel Cells, Yun Fan, Qi Wang, Jun Li, Jing-Li Luo, Xian-Zhu Fu
Research Progress In Ethane Dehydrogenation To Cogenerate Power And Value-Added Chemicals In Solid Oxide Fuel Cells, Yun Fan, Qi Wang, Jun Li, Jing-Li Luo, Xian-Zhu Fu
Journal of Electrochemistry
Increasing supplies of methane/shale gas have promoted global development of higher value chemicals such as ethylene production by ethane, which dramatically changes the markets of petrochemical industry. Clean and efficient transformation of ethane into higher value chemicals has far-reaching significance. Ethylene production through ethane steam cracking is a relatively matured technology for industrial production. However, the process consumes large amounts of energy and the presence of carbon deposition becomes a serious problem which is difficult to be solved. The cogenerated energy-chemicals solid oxide fuel cells have been widely studied because fuel gas can be converted into high-value chemicals via spontaneous …
Materials, Micro-Stacks And Related Applications Of Single-Chamber Solid Oxide Fuel Cells, Zhe Lv, Bo Wei, Zhi-Hong Wang, Yan-Ting Tian
Materials, Micro-Stacks And Related Applications Of Single-Chamber Solid Oxide Fuel Cells, Zhe Lv, Bo Wei, Zhi-Hong Wang, Yan-Ting Tian
Journal of Electrochemistry
Single-chamber solid oxide fuel cell (SC-SOFC) is a special type of fuel cells, in which both an anode and a cathode are placed in one chamber. Its working principle relies on the selective catalytic activity of the electrodes towards fuel and oxidant in a gas mixture, leading to the generation of an electromotive force. Because of its unique principle and structure, SC-SOFC has many advantages such as sealing-free, easy stacking, quick start-up and no carbon deposition, thus, it possesses large potential in application. Herein, the principles and characteristics of SC-SOFC are introduced. Furthermore, the SC-SOFC materials, micro-stack design, degeneration mechanisms …
Electrochemical Performance Improvement Of Li2Mno3 Cathode Materials By Mgf2 Coating, Du-Dan Wang, Fei Wang, Huan-Huan Zhai, Yu-Peng Li, Na-Chuan Yang, Kang-Hua Chen
Electrochemical Performance Improvement Of Li2Mno3 Cathode Materials By Mgf2 Coating, Du-Dan Wang, Fei Wang, Huan-Huan Zhai, Yu-Peng Li, Na-Chuan Yang, Kang-Hua Chen
Journal of Electrochemistry
Cathode material Li2MnO3 has received more and more attention owing to its high theoretical capacity (459 mAh·g -1). However, the low initial coulombic efficiency and the poor cycle stability hamper its practical application in lithium-ion batteries. Herein, we investigated the crystal structure and electrochemical performance of Li2MnO3 by introducing MgF2 coating layer. The results indicated that the conversion of partial layer Li2MnO3 to spinel phase induced by MgF2 coating could reduce the initial irreversible capacity and improve the first cycle efficiency. The initial coulombic efficiencies of the 0.5wt.%, …
Syntheses And Properties Of Ta5+ Doped Li7La3Zr2O12, Feng-Feng Peng, Shi-You Li, Tong-Tong Geng, Chun-Lei Li, Shuang-Wei Zeng
Syntheses And Properties Of Ta5+ Doped Li7La3Zr2O12, Feng-Feng Peng, Shi-You Li, Tong-Tong Geng, Chun-Lei Li, Shuang-Wei Zeng
Journal of Electrochemistry
The tantalum ion (Ta 5+) doped garnet-type inorganic solid electrolyte Ta-LLZO was prepared by solid state reaction, and the effect of doping amount on the properties of the materials was investigated. The materials were characterized by X-ray diffraction (XRD), field emission electron scanning microscopy (FESEM) and electrochemical impedance spectroscopy (EIS). And the cycle stability was tested by assembly of LiFePO4//LLZTO//Li all solid lithium battery. The results show that with the increase of Ta 5+ doping amount, the material appeared to form a single cubic phase structure. When the Ta 5+ doping content became 14.09wt.%, x=0.3, the …
Construction And Electrochemical Performance Of Garnet-Type Solid Electrolyte/Al-Li Alloy Interface, Jia-Lin Ma, Hong-Chun Wang, Zheng-Liang Gong, Yong Yang
Construction And Electrochemical Performance Of Garnet-Type Solid Electrolyte/Al-Li Alloy Interface, Jia-Lin Ma, Hong-Chun Wang, Zheng-Liang Gong, Yong Yang
Journal of Electrochemistry
Garnet-type solid electrolyte is a newly developed Li ion conductor and promising in the application of all-solid-state batteries. However, Garnet is incompatible with Li anode, which restricts the application of Garnet-type solid batteries. In order to improve the contact between Garnet-type solid electrolyte and Li electrode, a composite anode which contains Al-Li alloy (Al4Li9) was prepared as an electrode. Al-Li alloy has many advantages such as easy preparation, low cost, simple post-treatment and high capacity. Garnet-type Li6.5La3Zr1.75W0.25O12 (LLZWO) was synthesized via solid-state reaction. Garnet solid electrolyte has …
Challenges In The Activity And Stability Of Pt-Based Catalysts Toward Orr, Tuo Zhao, Er-Gui Luo, Xian Wang, Jun-Jie Ge, Chang-Peng Liu, Wei Xing
Challenges In The Activity And Stability Of Pt-Based Catalysts Toward Orr, Tuo Zhao, Er-Gui Luo, Xian Wang, Jun-Jie Ge, Chang-Peng Liu, Wei Xing
Journal of Electrochemistry
The development of highly efficient oxygen reduction reaction (ORR) catalysts is the key to the commercialization of fuel cells, where the sluggish ORR reaction rate needs to be overcome by adjusting the intermediates adsorption energies on the catalytic surfaces. To-date, platinum (Pt)-based materials are the-state-of-the-art catalysts in terms of both activity and stability in ORR, making them the preferred choice for commercial applications. However, the high cost of Pt-based catalysts limits their widespread use, leading to massive effects paid in reducing Pt loading, improving catalyst activity and stability. This article illustrates the challenges in the ORR reaction and introduces the …
Preparation And Electrocatalytic Performance Of Nico2O4/Ni Foam For Hydrogen Peroxide Electrooxidation, Wei-Wei Chen, Fei-Fan Zhang, Jia-Liang Du, Yi Wang, Chun-Lin Zhao, Kai Zhu, Dian-Xue Cao, Gui-Ling Wang
Preparation And Electrocatalytic Performance Of Nico2O4/Ni Foam For Hydrogen Peroxide Electrooxidation, Wei-Wei Chen, Fei-Fan Zhang, Jia-Liang Du, Yi Wang, Chun-Lin Zhao, Kai Zhu, Dian-Xue Cao, Gui-Ling Wang
Journal of Electrochemistry
The electrodes of Ni foam supported NiCo2O4 nanowires were prepared by hydrothermal method, followed by a thermal treatment in air, and were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). It was found that the NiCo2O4 nanowires had a diameter of about 50 nm with a length up to 3 ~ 5 μm. The catalytic performances of the Ni foam supported NiCo2O4 nanowires for H2O2 electrooxidation were studied by cyclic voltammetry and chronoamperometry. The results show that the Ni foam supported NiCo …
Research Progresses In Polymeric Proton Exchange Membranes For Fuel Cells, Xu-Po Liu, Yun-Feng Zhang, Shao-Feng Deng, De-Li Wang, Han-Song Cheng
Research Progresses In Polymeric Proton Exchange Membranes For Fuel Cells, Xu-Po Liu, Yun-Feng Zhang, Shao-Feng Deng, De-Li Wang, Han-Song Cheng
Journal of Electrochemistry
Proton exchange membrane (PEM) is one of the key components in PEM fuel cells, which possesses the function of separating the cathode and anode, affording proton transport channels and preventing fuel permeability. The property of PEM significantly influences the performance and service life of fuel cells. Nowadays, the commercially used Nafion membranes have the shortcomings of serious fuel permeability, low proton conductivity at elevated temperature and high price, which limits the rapid development of PEM fuel cells. Therefore, it seems to be urgent to develop novel PEMs with low cost and good comprehensive properties. Polymeric proton exchange membrane is an …
Research Progresses In Ni-Co-Mn/Al Ternary Concentration Gradient Cathode Materials For Li-Ion Batteries, Chun-Fang Zhang, Wen-Gao Zhao, Shi-Yao Zheng, Yi-Xiao Li, Zheng-Liang Gong, Zhong-Ru Zhang, Yong Yang
Research Progresses In Ni-Co-Mn/Al Ternary Concentration Gradient Cathode Materials For Li-Ion Batteries, Chun-Fang Zhang, Wen-Gao Zhao, Shi-Yao Zheng, Yi-Xiao Li, Zheng-Liang Gong, Zhong-Ru Zhang, Yong Yang
Journal of Electrochemistry
Nickel-rich ternary materials with large reversible capacity as well as high operating voltage are considered as the most promising candidate for next generation lithium-ion batteries (LIBs). However, the inferior cycle stability and thermal stability have limited their widely commercial applications. Concentration gradient design of Ni-Co-Mn/Al ternary concentration gradient materials have been extensively studied in the past decade, which can ensure high cycle capacity while maintaining excellent cycle stability. In this paper, the latest research progresses in Ni-Co-Mn/Al ternary concentration gradient materials for LIBs are reviewed. Firstly, we summarize the different synthesis methods of ternary concentration-gradient materials, especially focusing on the …
Structures And Electrochemical Properties Of Sn-Cl Co-Doped Li2Mno3 As Positive Materials For Lithium Ion Batteries, Fei Wang, Huan-Huan Zhai, Du-Dan Wang, Yu-Peng Li, Kang-Hua Chen
Structures And Electrochemical Properties Of Sn-Cl Co-Doped Li2Mno3 As Positive Materials For Lithium Ion Batteries, Fei Wang, Huan-Huan Zhai, Du-Dan Wang, Yu-Peng Li, Kang-Hua Chen
Journal of Electrochemistry
Positive material Li2MnO3 shows the highest ratio of lithium to manganese among lithium-rich materials and exhibites the theoretical capacity up to 458 mAh·g-1, making it one of the most promising cathode materials. However, this material has the intrinsic low electrical conductivity and poor cycle stability. In this paper, Li2MnO3, the lithium-rich positive material, was prepared by sol-gel method using acetate as raw material and citric acid as a complexing agent. By using SnC2O4 as a tin source, Sn4+ instead of Mn4+ was introduced to obtain the …
Lithium Storage Performance Of High Capacity Material Si@CPzs In Lithium Ion Batteries, Qing-Nuan Zhang, Fang-Fang Zhang, Hong-Xia Li, Bing-Jun Yang, Xiao-Cheng Li, Juan Yang
Lithium Storage Performance Of High Capacity Material Si@CPzs In Lithium Ion Batteries, Qing-Nuan Zhang, Fang-Fang Zhang, Hong-Xia Li, Bing-Jun Yang, Xiao-Cheng Li, Juan Yang
Journal of Electrochemistry
Carbon layers with different thicknesses were introduced into the surfaces of silicon (Si) nanoparticles by sol-gel method using poly (cyclotriphosphazene-co-4, 4'-sulfonyldiphenol) as the carbon source. Technologies of X-ray diffraction, thermo-gravimetric analysis, Brunauer-Emmett-Teller and transmission electron microscopy were employed to analyze the structures and components of the as-prepared Si@CPZS composites. Electrochemical performance of Si@CPZS with different carbon thicknesses was studied. The results showed that Si@CPZS with carbon thickness of 10 nm possessed the best performance. Its capacity remained 940 mAh·g-1 after 290 cycles under 500 mA·g-1. As the addictive, the graphite-based anode contained 30% of …
Preparations Of Nickel-Iron Hydroxide/Sulfide And Their Electrocatalytic Performances For Overall Water Splitting, Hang-Shuo Lu, Xiao-Bo He, Feng-Xiang Yin, Guo-Ru Li
Preparations Of Nickel-Iron Hydroxide/Sulfide And Their Electrocatalytic Performances For Overall Water Splitting, Hang-Shuo Lu, Xiao-Bo He, Feng-Xiang Yin, Guo-Ru Li
Journal of Electrochemistry
The Ni-Fe/Ti oxygen evolution electrode was prepared by electrodeposition on a titanium mesh substrate. Then, the as prepared Ni-Fe/Ti electrode was used to derive the Ni-Fe-S/Ti hydrogen evolution electrode through solid phase sulfuration. The effects of the molar ratio of Ni2+ to Fe3+ in the electrolyte and the amount of thiourea on the structures and electrochemical performances of Ni-Fe/Ti and Ni-Fe-S/Ti electrodes were investigated. The results show that the oxygen evolution performance of Ni-Fe/Ti electrode was first increased and then decreased with the increase of nickel ion content in the electrolyte. The Ni9Fe1/Ti electrode exhibited the best oxygen …
Atomic Force Microscopic Characterization Of Solid Electrolyte Interphase In Lithium Ion Batteries, Qing-Yu Dong, Yan-Li Chu, Yan-Bin Shen, Li-Wei Chen
Atomic Force Microscopic Characterization Of Solid Electrolyte Interphase In Lithium Ion Batteries, Qing-Yu Dong, Yan-Li Chu, Yan-Bin Shen, Li-Wei Chen
Journal of Electrochemistry
In recent years, the rapid growing in the electric vehicle market has raised higher requirement on the lithium-ion batteries (LIBs) performance towards energy density and safety. However, considering the successful development of LIBs techniques in the past 30 years, there is little room left for improving the LIBs performance on the aspects related to the electrode materials, battery structure design and production processes. It is important to pursue more comprehensive fundamental understanding in the entire system and working principle of LIBs. Solid electrolyte interphase (SEI), existing between the electrode material and the electrolyte, has been proved to be an important …
Electrochemical Preparations And Applications Of Nano-Catalysts With High-Index Facets, Chi Xiao, Na Tian, Zhi-You Zhou, Shi-Gang Sun
Electrochemical Preparations And Applications Of Nano-Catalysts With High-Index Facets, Chi Xiao, Na Tian, Zhi-You Zhou, Shi-Gang Sun
Journal of Electrochemistry
The performance of catalysts highly depends on their surface structure and composition. Nanocrystals bounded by high-index facets usually exhibit high catalytic activity due to their high-density low-coordinated step atoms with high reactivity. In this paper, we have reviewed the preparations of noble metals (e.g., Pt, Pd and Rh) nanocatalysts with high-index facets by electrochemical square-wave potential method developed in our group. The square-wave potential method includes a nucleation procedure to generate nuclei, followed by a square-wave potential procedure for a certain period of time for the growth of nuclei into nanocrystals. The formation mechanism of high-index facets is also discussed. …
Recent Progress In The Mechanistic Understanding Of Co2 Reduction On Copper, Matthew M Sartin, Wei Chen, Fan He, Yan-Xia Chen
Recent Progress In The Mechanistic Understanding Of Co2 Reduction On Copper, Matthew M Sartin, Wei Chen, Fan He, Yan-Xia Chen
Journal of Electrochemistry
In this review, we present the major developments in the understanding of the mechanisms of the electrochemical reduction of CO2 from a historical perspective. Most of the work discussed in this review was carried out at copper electrodes, as this is the only material at which hydrocarbons are produced in reasonable quantities. The emphasis focuses on the differentiation of mechanisms for the generation of C1 and C2 products as well as factors and methods for controlling the product selectivity of CO2 reduction. We have highlighted ambiguities, assumptions, and important methodologies, such as differential electrochemical mass spectrometry and electrochemical …
Effect Of Nitrogen Content In Catalyst Precursor On Activity Of Fen/C Catalyst For Oxygen Reduction Reaction, Zhi Yang, Ya-Yun Shen, E Zhou, Cheng-Ling Wei, Hao-Li Qin, Juan Tian
Effect Of Nitrogen Content In Catalyst Precursor On Activity Of Fen/C Catalyst For Oxygen Reduction Reaction, Zhi Yang, Ya-Yun Shen, E Zhou, Cheng-Ling Wei, Hao-Li Qin, Juan Tian
Journal of Electrochemistry
Non-noble metal catalysts with high activity and low cost have attracted increasing interest as potential catalysts for oxygen reduction reaction (ORR) to replace Pt-based catalysts. In this paper, the effect of nitrogen content in catalyst precursor on ORR activity of FeN/C catalyst was investigated by X-ray diffraction (XRD), Brunauer-Emmet-Teller (BET) surface area and pore size distribution measurements, transmission electron microscope (TEM), thermogravimetric analysis (TGA), and rotating disk electrode (RDE) techniques. The results show that the most active catalyst was obtained by pyrolysis in argon at 1050 °C with a catalyst precursor containing 20wt% 1,10-phenanthroline, 1wt% Fe and Black Pearl 2000. …
Electrochemical Determination Of Trace Copper Ions In Drinking Water Source, Jing-Ji Peng, Hong Zheng, Yi-Song Zou, Guo-Kun Liu, Dong-Xing Yuan
Electrochemical Determination Of Trace Copper Ions In Drinking Water Source, Jing-Ji Peng, Hong Zheng, Yi-Song Zou, Guo-Kun Liu, Dong-Xing Yuan
Journal of Electrochemistry
Aiming at the on-site and quick safety evaluation of the dissolved trace copper ions (Cu2+) in drinking water source, an electrochemical detection platform was developed on the basis of the square wave anodic stripping voltammetry using the gold nanoparticles (Au NPs) modified glassy carbon electrode, where Au NPs were deposited via electrochemical cyclic voltammetry. The proposed method displayed the limit of detection as low as 1.3 μg·L-1 in the linear range of 2 ~ 50 μg·L-1. The proposed method was applied to the determination of Cu2+ in the midstream of Minjiang River, one of …
Electrochemical Behaviors Of Azopurine On Gold Electrodes, Ming-Xue Li, Hang Shi, Jia Liu, Meng Zhang, Jian-Zhang Zhou, De-Yin Wu, Zhong-Qun Tian
Electrochemical Behaviors Of Azopurine On Gold Electrodes, Ming-Xue Li, Hang Shi, Jia Liu, Meng Zhang, Jian-Zhang Zhou, De-Yin Wu, Zhong-Qun Tian
Journal of Electrochemistry
In this paper, we studied the electrochemical behaviors of azopurine on polished gold electrodes with cyclic voltammetry (CV). On the basis of analyzing scan rate and peak current, it was supposed that the redox process belonged to a reversible process controlled by adsorption in 0.2 mol·L-1 PBS (pH = 4.0 ~ 10.0) solutions. The potentials of redox peaks moved more negatively with increasing pH value. This proved that the H+ proton has participcted in the electrochemical reaction. The further data analysis and the calculation of surface adsorption excess demonstrated that the reaction was a two-proton and two-electron process. …
Ionic Liquid Assisted Synthesis Of Porous Carbons From Rice Husk For Supercapacitors, Han-Fang Zhang, Feng Wei, Jian Sun, Meng-Ying Jing, Xiao-Jun He
Ionic Liquid Assisted Synthesis Of Porous Carbons From Rice Husk For Supercapacitors, Han-Fang Zhang, Feng Wei, Jian Sun, Meng-Ying Jing, Xiao-Jun He
Journal of Electrochemistry
It is still a challenge to prepare carbon materials with high specific surface area at low cost from renewable resources. Herein, the authors report an efficient approach to synthesize porous carbons (PCs) from rice husk with ionic liquid (1-butyl-3-methylimidazolium hexafluorophosphate (BMIMPF6)) as a template and an activation agent. The as-made PCs featured the high specific surface area up to 1438 m2·g-1. As electrodes for supercapacitors, PCs showed a high specific capacitance of 256 F·g-1 at 0.05 A·g-1 in 6 mol·L-1 KOH aqueous electrolyte and a good rate performance of 211 F·g …
Study On Electro-Sorption Of Heavy Metals And Sulfamethoxazole On Activated Carbon Fibers, Wen-Jun Zhao, Bing-Xin Jia, Ya-Nan Zhang, Jiu-Nian Guan, Jiao Qu, Ying Lu
Study On Electro-Sorption Of Heavy Metals And Sulfamethoxazole On Activated Carbon Fibers, Wen-Jun Zhao, Bing-Xin Jia, Ya-Nan Zhang, Jiu-Nian Guan, Jiao Qu, Ying Lu
Journal of Electrochemistry
To study the optimal removal condition, adsorption mechanism and comparative analysis of the three typical cationic pollutants, i.e., Zn(II), anionic pollutant Cr(VI) and molecular pollutant sulfamethoxazole (SMX), using self-made upflowed electro-sorption device for adsorptions of above three pollutants by modified activated carbon fiber were researched. The activated carbon fiber (ACF) was modified by hydrochloric acid. The ACF morphology and structure before and after modification were characterized by SEM, BET and FTIR. The characterization results show that the modified ACF had fewer surface impurities than the modified surface and the gully is more obvious, the specific surface area was increased by …
Electrochemical Cycling Stability Of Polyaniline Films In Different Color Ranges, Kun Xu, Kai-Ling Zhou, Hao Wang, Jing-Bing Liu, Hui Yan
Electrochemical Cycling Stability Of Polyaniline Films In Different Color Ranges, Kun Xu, Kai-Ling Zhou, Hao Wang, Jing-Bing Liu, Hui Yan
Journal of Electrochemistry
The electrochromic behaviors of polyaniline films were investigated by potential step and cyclic voltammetry coupled with UV viscosity photometer. The polyaniline films show colorful changes from pale yellow to green and then to blue. Electrochromic stability, electrochemical behavior, coloring performance, optical properties and surface formations of the produced films were studied in detail. The working electrode was the flexible PANI electrode, and the counter electrode and the reference electrode were a platinum sheet and Ag/AgCl, respectively. The in situ optical transmittance of the PANI film at 650 nm was measured using an ultraviolet-visible-near-infrared spectrophotometer (Shimadzu UV-3101PC) combining with a square …
Transient Electrochemical Surface-Enhanced Raman Spectroscopic Study In Electrochemical Reduction Of P-Nitrothiophenol, Yun Ling, Jing Tang, Guo-Kun Liu, Cheng Zong
Transient Electrochemical Surface-Enhanced Raman Spectroscopic Study In Electrochemical Reduction Of P-Nitrothiophenol, Yun Ling, Jing Tang, Guo-Kun Liu, Cheng Zong
Journal of Electrochemistry
P-nitrothiophenol (PNTP) is one of the most common probe molecules studied by surface-enhanced Raman spectroscopy (SERS). The research in electrochemical reduction behavior of PNTP will help understanding the mechanism for the nitrobenzene reduction. In this paper, we used transient electrochemical surface-enhanced Raman spectroscopy (TEC-SERS) to study the SERS of PNTP with cyclic voltammetry and chronoamperometry on gold electrodes. The results show that the TEC-SERS provide a time resolution that equals the transient electrochemical methods, and we concluded that the reaction was so quick that we did not observe the spectral information of intermediate species described in the literatures with a …
Zif-67-Derived Ag/Co-Embedded N-Enriched Mesoporous Carbon For Oxygen Reduction Reaction, Zheng-Ling Di, Jing Zhu, Lei Dai, Wei Meng, Yue-Hua Li, Zhang-Xing He, Ling Wang
Zif-67-Derived Ag/Co-Embedded N-Enriched Mesoporous Carbon For Oxygen Reduction Reaction, Zheng-Ling Di, Jing Zhu, Lei Dai, Wei Meng, Yue-Hua Li, Zhang-Xing He, Ling Wang
Journal of Electrochemistry
Nitrogen-doped porous carbon materials are considered as one of the most promising catalysts for oxygen reduction reaction (ORR). Herein, in order to further improve the activity of the nitrogen-doped porous carbon, Ag/Co bimetal is embedded into nitrogendoped porous carbon to form Ag/Co-embedded nitrogen-doped porous carbon material (AgCo@NC). The AgCo@NC was derived by the wet impregnation of Ag+ into ZIF-67 precursor, followed by chemical reduction and a subsequent pyrolysis process under Ar atmosphere at different temperatures (500 ℃, 600 ℃, 700 ℃). The morphologic characterization shows that the Ag/Co nanoparticles were successfully embedded in the mesoporous carbon framework with abundant nitrogen …
Polyaniline Coated Hollow Sulfur Prepared Using Sublimate 2,4,6-Tri(Propan-2-Yl)-1,3,5-Trioxane As Template For Sulfur Electrode, Zhang-Feng Li, Xiao-Rui Wang, Wen-Sheng Tian, Jin-Ze Yang, Ping Zhang, Li-Ping Ma, Yang Chen, Xiao-Li Cui, Zhi-Yu Jiang
Polyaniline Coated Hollow Sulfur Prepared Using Sublimate 2,4,6-Tri(Propan-2-Yl)-1,3,5-Trioxane As Template For Sulfur Electrode, Zhang-Feng Li, Xiao-Rui Wang, Wen-Sheng Tian, Jin-Ze Yang, Ping Zhang, Li-Ping Ma, Yang Chen, Xiao-Li Cui, Zhi-Yu Jiang
Journal of Electrochemistry
An advance method for preparing polyaniline-coated hollow sulfur material using sublimate material ADD(2,4,6-tri(propan-2-yl)-1,3,5-trioxane) as a template was developed for lithium-sulfur battery. At first, the smashed ADD particles were coated by a sulfur layer through the reaction of Na2S2O3 with diluted HCl. Then polyaniline layer was coated again on the surface of sulfur layer through the reaction of aniline with (NH4)2S2O8. After being dried at 60 oC for 12 h, the ADD in such a composite evaporated totally, and resulted in the formation of polyaniline-coated hollow sulfur …
Bipolar-Membrane Electrodialysis Method To Treat Industrial High Saline Perfume Wastewater, Jian Zhang, Dong-Fang Niu, Shuo-Zhen Hu, Xin-Sheng Zhang
Bipolar-Membrane Electrodialysis Method To Treat Industrial High Saline Perfume Wastewater, Jian Zhang, Dong-Fang Niu, Shuo-Zhen Hu, Xin-Sheng Zhang
Journal of Electrochemistry
Large amount of organic saline wastewater is generated from various chemical industries. The contents of organic saline wastewater are more and more complicated as they are created from different types of industries. Directly discharging the organic saline wastewater without pre-treatment can generate severe environmental problem and waste useful resources. It is necessary to use an economical method to treat the organic saline wastewater and recover the salt into useful materials to achieve resource reuse. Bipolar-membrane electrodialysis (BMED) is one of the methods that can remove salt from the wastewater and convert it into certain acid and base with higher value …
Morphology Controlled Preparations And Electrochemical Properties Of Znco2O4 Electrode Materials For Supercapacitors, Yue-Shen Zhou, Meng Li, Shuang Wu, Zhao-Lei Li, Yan-Min Gao
Morphology Controlled Preparations And Electrochemical Properties Of Znco2O4 Electrode Materials For Supercapacitors, Yue-Shen Zhou, Meng Li, Shuang Wu, Zhao-Lei Li, Yan-Min Gao
Journal of Electrochemistry
In this work, hydrothermal reaction and high temperature were used to grow ZnCo2O4 active materials on Ni foam. The crystal stuctures and surface morphlogies of four samples were investigated by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM). The electrochemical performances were characterized by cyclic voltammetry (CV), galvanostatic charge/discharge (GCD) testing and electrochemical impedance spectroscopy (EIS) on an electrochemical station. It can be seen that active materials tended to form denser stuctures with an increasing amount of NH4F in the solution system and four different morphologies of ZnCo2 …
Electrochemical Properties Of Sulfur In Different Carbon Support Materials, Bo Zhang, Jia Liu, Xiao-Chen Liu, De-Jun Li
Electrochemical Properties Of Sulfur In Different Carbon Support Materials, Bo Zhang, Jia Liu, Xiao-Chen Liu, De-Jun Li
Journal of Electrochemistry
In order to investigate the effect of carbon structure on electrochemical performance of sulfur/carbon composite in lithium-sulfur battery, in this paper, sublimation sulfur was incorporated into three types of carbon materials, namely, graphene, carbon black and porous carbon. The three sulfur/carbon composites were characterized by scanning electron microscopy (SEM), Brunauer-Emmett-Teller (BET), and X-ray diffraction (XRD) techniques, and their electrochemical performances were also studied. The results showed that the sulfur/porous carbon composite offered an initial discharge capacity of 1623.2 mA·h·g-1 and remained 845 mA·h·g-1 after 100 cycles. Compared with graphene and carbon black, the mesopores and micropores in porous …