Open Access. Powered by Scholars. Published by Universities.®

Materials Science and Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Electronic Theses and Dissertations

Discipline
Institution
Keyword
Publication Year

Articles 181 - 210 of 267

Full-Text Articles in Materials Science and Engineering

Developing Surface Engineered Liquid Crystal Droplets For Sensing Applications, Tanmay Bera Jan 2012

Developing Surface Engineered Liquid Crystal Droplets For Sensing Applications, Tanmay Bera

Electronic Theses and Dissertations

Diagnosis plays a very crucial role in medicine and health care, which makes biosensors extremely important in modern technological context. Till date, various types of biosensors have been developed that are capable of detecting a wide range of biologically important species with great sensitivity and selectivity. However, most of these sensing units require highly sophisticated instrumentation and often lack the desired portability. Liquid crystal (LC) droplets, on the other hand, are a new type of functional material that are finding increasing research attention as a new sensing unit due to their tunable optical property, high surface area, portability and cost-effectiveness. …

Go to article

Optimization Of Process Parameters For Faster Deposition Of Cuin1-Xgaxs2 And Cuin1-Xgaxse2-Ysy Thin Film Solar Cells, Ashwani Kaul Jan 2012

Optimization Of Process Parameters For Faster Deposition Of Cuin1-Xgaxs2 And Cuin1-Xgaxse2-Ysy Thin Film Solar Cells, Ashwani Kaul

Electronic Theses and Dissertations

Thin film solar cells have the potential to be an important contributor to the world energy demand in the 21st century. Among all the thin film technologies, CuInGaSe2 (CIGS) thin film solar cells have achieved the highest efficiency. However, the high price of photovoltaic (PV) modules has been a major factor impeding their growth for terrestrial applications. Reduction in cost of PV modules can be realized by several ways including choosing scalable processes amenable to large area deposition, reduction in the materials consumption of active layers, and attaining faster deposition rates suitable for in-line processing. Selenization-sulfurization of sputtered metallic Cu-In-Ga …

Go to article

Effects Of Allotropic Transformations On Interdiffusion Behavior In Binary Systems, Ashley Elizabeth Ewh Jan 2012

Effects Of Allotropic Transformations On Interdiffusion Behavior In Binary Systems, Ashley Elizabeth Ewh

Electronic Theses and Dissertations

Diffusion plays a significant role in most materials systems by controlling microstructural development. Consequently, the overall properties of a material can be largely dependent upon diffusion. This study investigated the interdiffusion behavior of three binary systems, namely, Mo-Zr, Fe-Mo, and Fe-Zr. The main interest in these particular metals is for application in nuclear fuel assemblies. Nuclear fuel plates generally consist of two main components which are the fuel and the cladding. Due to diffusional interactions that can occur between these two components, a third is sometimes added between the fuel and cladding to serve as a diffusion barrier layer. Fe, …

Go to article

Thermally Annealled Plasmonic Nanostructures, Chaoming Wang Jan 2012

Thermally Annealled Plasmonic Nanostructures, Chaoming Wang

Electronic Theses and Dissertations

Localized surface plasmon resonance (LSPR) is induced in metal nanoparticles by resonance between incident photons and conduction electrons in nanoparticles. For noble metal nanoparticles, LSPR can lead to strong absorbance of ultraviolet-violet light. Although it is well known that LSPR depends on the size and shape of nanoparticles, the inter-particle spacing, the dielectric properties of metal and the surrounding medium, the temperature dependence of LSPR is not well understood. By thermally annealing gold nanoparticle arrays formed by nanosphere lithography, a shift of LSPR peak upon heating has been shown. The thermal characteristics of the plasmonic nanoparticles have been further used …

Go to article

Multiscale Simulation Of Laser Ablation And Processing Of Semiconductor Materials, Lalit Shokeen Jan 2012

Multiscale Simulation Of Laser Ablation And Processing Of Semiconductor Materials, Lalit Shokeen

Electronic Theses and Dissertations

We present a model of laser-solid interactions in silicon based on an empirical potential developed under conditions of strong electronic excitations. The parameters of the interatomic potential depends on the temperature of the electronic subsystem Te, which is directly related to the density of the electron-hole pairs and hence the number of broken bonds. We analyze the dynamics of this potential as a function of electronic temperature Te and lattice temperature Tion. The potential predicts phonon spectra in good agreement with finite-temperature densityfunctional theory, including the lattice instability induced by the high electronic excitations. For 25fs pulse, a wide range …

Go to article

High Frequency Thermally Actuated Single Crystalline Silicon Micromechanical Resonators With Piezoresistive Readout, Amir Rahafrooz Jan 2011

High Frequency Thermally Actuated Single Crystalline Silicon Micromechanical Resonators With Piezoresistive Readout, Amir Rahafrooz

Electronic Theses and Dissertations

Over the past decades there has been a great deal of research on developing high frequency micromechanical resonators. As the two most common and conventional MEMS resonators, piezoelectric and electrostatic resonators have been at the center of attention despite having some drawbacks. Piezoelectric resonators provide low impedances that make them compatible with other low impedance electronic components, however they have low quality factors and complicated fabrication processes. In case of electrostatic resonators, they have higher quality factors but the need for smaller transductions gaps complicates their fabrication process and causes squeezed film damping in Air. In addition, the operation of …

Go to article

Process-Dependent Microstructure And Severe Plastic Deformation In Sicp?? Reinforced Aluminum Metal Matrix Composites, Catalina Uribe-Restrepo Jan 2011

Process-Dependent Microstructure And Severe Plastic Deformation In Sicp?? Reinforced Aluminum Metal Matrix Composites, Catalina Uribe-Restrepo

Electronic Theses and Dissertations

Discontinuously reinforced MMCs with optimized microstructure are sought after for exceptional high strain rate behavior. The microstructure evolution of a stir-cast A359 aluminum composite reinforced with 30 vol.% SiCp after isothermal anneal, successive hot-rolling, and high strain rate deformation has been investigated. Quantitative microstructural analysis was carried out for the as-cast, annealed (470°C, 538°C and 570°C) and successively hot rolled specimens (64, 75, 88, and 96% rolling reductions). Selected composites were also examined after high strain rate deformation. X-ray diffraction, optical microscopy, scanning electron microscopy and transmission electron microscopy were employed for microstructural characterization. The strength and ductility of the …

Go to article

Fatigue Lifetime Approximation Based On Quantitative Microstructural Analysis For Air Plasma Sprayed Thermal Barrier Coatings, Carmen Bargraser Jan 2011

Fatigue Lifetime Approximation Based On Quantitative Microstructural Analysis For Air Plasma Sprayed Thermal Barrier Coatings, Carmen Bargraser

Electronic Theses and Dissertations

The durability of thermal barrier coatings (TBCs) affects the life of the hot section engine components on which they are applied. Fatigue is the general failure mechanism for such components and is responsible for most unexpected failures; therefore it is desirable to develop lifetime approximation models to ensure reliability and durability. In this study, we first examined the microstructural degradation of air plasma sprayed ZrO2-8wt.%Y2O3 TBCs with a low-pressure plasma sprayed CoNiCrAlY bond coat on an IN 738LC superalloy substrate. The durability of TBCs were assessed through furnace thermal cyclic tests carried out in air at 1100°C with a 1-, …

Go to article

Correlation Between Preparation Parameters And Properties Of Molybdenum Back Contact Layer For Cigs Thin Film Solar Cells, Eigo Takahashi Jan 2010

Correlation Between Preparation Parameters And Properties Of Molybdenum Back Contact Layer For Cigs Thin Film Solar Cells, Eigo Takahashi

Electronic Theses and Dissertations

Molybdenum (Mo) thin film back contact layers for thin film CuIn(1-x)GaxSe2 (CIGS) solar cells were deposited onto soda lime glass substrates using a direct current (DC) planar magnetron sputtering deposition technique. Requirements for the Mo thin film as a back contact layer for CIGS solar cells are various. Sheet resistance, contact resistance to the CIGS absorber, optical reflectance, surface morphology, and adhesion to the glass substrate are the most important properties that the Mo thin film back contact layer must satisfy. Experiments were carried out under various combinations of sputtering power and working gas pressure, for it is well known …

Go to article

Tunable Infrared Metamaterials, David Shelton Jan 2010

Tunable Infrared Metamaterials, David Shelton

Electronic Theses and Dissertations

Metamaterials are engineered periodic composites that have unique refractive-index characteristics not available in natural materials. They have been demonstrated over a large portion of the electromagnetic spectrum, from visible to radiofrequency. For applications in the infrared, the structure of metamaterials is generally defined using electron-beam lithography. At these frequencies, the loss and dispersion of any metal included in the composite are of particular significance. In this regard, we investigate deviations from the Drude model due to the anomalous skin effect. For comparison with theoretical predictions, the optical properties of several different metals are measured, both at room temperature and at …

Go to article

Probing The Nanoscale Interaction Forces And Elastic Properties Of Organic And Inorganic Materials Using Force-Distance (F-D) Spectroscopy, Abhilash Vincent Jan 2010

Probing The Nanoscale Interaction Forces And Elastic Properties Of Organic And Inorganic Materials Using Force-Distance (F-D) Spectroscopy, Abhilash Vincent

Electronic Theses and Dissertations

Due to their therapeutic applications such as radical scavenging, MRI contrast imaging, Photoluminescence imaging, drug delivery, etc., nanoparticles (NPs) have a significant importance in bio-nanotechnology. The reason that prevents the utilizing NPs for drug delivery in medical field is mostly due to their biocompatibility issues (incompatibility can lead to toxicity and cell death). Changes in the surface conditions of NPs often lead to NP cytotoxicity. Investigating the role of NP surface properties (surface charges and surface chemistry) on their interactions with biomolecules (Cells, protein and DNA) could enhance the current understanding of NP cytotoxicity. Hence, it is highly beneficial to …

Go to article

Environmental Degradation Of Oxidation Resistant And Thermal Barrier Coatings For Fuel-Flexible Gas Turbine Applications, Prabhakar Mohan Jan 2010

Environmental Degradation Of Oxidation Resistant And Thermal Barrier Coatings For Fuel-Flexible Gas Turbine Applications, Prabhakar Mohan

Electronic Theses and Dissertations

The development of thermal barrier coatings (TBCs) has been undoubtedly the most critical advancement in materials technology for modern gas turbine engines. TBCs are widely used in gas turbine engines for both power-generation and propulsion applications. Metallic oxidation-resistant coatings (ORCs) are also widely employed as a stand-alone protective coating or bond coat for TBCs in many high-temperature applications. Among the widely studied durability issues in these high-temperature protective coatings, one critical challenge that received greater attention in recent years is their resistance to high-temperature degradation due to corrosive deposits arising from fuel impurities and CMAS (calcium-magnesium-alumino-silicate) sand deposits from air …

Go to article

Branched And Spiral Organic Nanotubes Based On The Self-Assembly Of Bile Acids, Xuejun Zhang Jan 2010

Branched And Spiral Organic Nanotubes Based On The Self-Assembly Of Bile Acids, Xuejun Zhang

Electronic Theses and Dissertations

The self-assembly of chiral amphiphilic molecules in aqueous solutions is of particular interest because the chirality of individual molecules is often expressed in their supermolecular structures. Self-assembled tubes made of chiral amphiphilic molecules represent useful supramolecular architectures which hold promise as controlled release vehicles for drug delivery, encapsulates for functional molecules, and nanoreactors for chemical reactions. Lithocholic acid (LCA) is a secondary bile acid with the concentration being identical to that of cholesterol in the hepatic bile and gallbladder. It has a rigid, nearly planar hydrophobic steroid nucleus, with four hydrogen atoms and one hydroxyl group directed toward the concave …

Go to article

Structural Characterization Of Sputter-Deposited Ss304+Xal (X = 0, 4, 7 And 10 Wt.%) Coatings And Mechanically Milled Ti, Zr And, Uma Maheswara Seelam Jan 2010

Structural Characterization Of Sputter-Deposited Ss304+Xal (X = 0, 4, 7 And 10 Wt.%) Coatings And Mechanically Milled Ti, Zr And, Uma Maheswara Seelam

Electronic Theses and Dissertations

Study of the metastable phases obtained by non-equilibrium processing techniques has come a long way during the past five decades. New metastable phases have often given new perspectives to the research on synthesis of novel materials systems. Metastable materials produced by two non-equilibrium processing methods were studied for this dissertation- 304-type austenitic stainless steel (SS304 or Fe-18Cr-8Ni)+aluminum coatings produced by plasma enhanced magnetron sputter-deposition (PEMS) and nanocrystalline Ti, Zr and Hf powders processed by mechanical milling (MM). The objective of the study was to understand the crystallographic and microstructural aspects of these materials. Four SS304+Al coatings with a nominal Al …

Go to article

Microstructural Investigation Of Precipitation Hardened Cuni2s+Zr Alloys For Rotor Applications, Jean-Paul Vega-Garcia Jan 2010

Microstructural Investigation Of Precipitation Hardened Cuni2s+Zr Alloys For Rotor Applications, Jean-Paul Vega-Garcia

Electronic Theses and Dissertations

Industrial generator components experience high stresses and electrical fields during their service life. Material integrity is key in guaranteeing component performance. CuNi2SiZr, used as rotor wedges in generators, serve to maintain rotor slot content in place while experiencing high centrifugal stresses and low cycle fatigue during start and stop at elevated temperature. The quality and integrity of this material in service can be directly related to its microstructure, which is determined by the processing procedures of the wedges. In this study, the microstructure development in this material is evaluated to eliminate grain boundary defects by optimizing processing parameters, determining the …

Go to article

Investigation Of Thermal, Elastic And Load-Biased Transformation Strains In Niti Shape Memory Alloys, Shipeng Qiu Jan 2010

Investigation Of Thermal, Elastic And Load-Biased Transformation Strains In Niti Shape Memory Alloys, Shipeng Qiu

Electronic Theses and Dissertations

Polycrystalline NiTi shape memory alloys have the ability to recover their original, pre-deformed shape in the presence of external loads when heated through a solid-solid phase transformation from a lower-symmetry B19' martensite phase to a higher-symmetry B2 austenite phase. The strain associated with a shape memory alloy in an actuator application typically has thermal, elastic and inelastic contributions. The objective of this work was to investigate the aforementioned strains by recourse to in situ neutron diffraction experiments during selected combinations of heating, cooling and/or mechanical loading. The primary studies were conducted on polycrystalline Ni49.9Ti50.1 specimens on the Spectrometer for MAterials …

Go to article

Strengthening Potential Of Single-Walled Carbon Nanotubes In Phenolic Resin Composites, Brittany Kerr Jan 2010

Strengthening Potential Of Single-Walled Carbon Nanotubes In Phenolic Resin Composites, Brittany Kerr

Electronic Theses and Dissertations

Strengthening potential of single-walled carbon nanotubes (SWCNTs) in a phenolic resin composite was evaluated by characterization of purified and phenyl sulfonated SWCNTs, investigation of the load transfer capability of the purified SWCNTs, and characterization of the composites. Purified and phenyl sulfonated SWCNTs, as well as their composites, were examined by Raman spectroscopy, thermogravimetric analysis, scanning electron microscopy equipped with energy dispersive spectroscopy, transmission electron microscopy, X-ray photoelectron spectroscopy and ultra violet-visible spectrometry. Fabrication of the SWCNT/phenolic resin composite was performed by first dispersing the SWCNTs in ethylene glycol and then homogenizing the mixture with phenolic resin. The ethylene glycol was …

Go to article

Thermal Detection Of Biomarkers Using Phase Change Nanoparticles, Chaoming Wang Jan 2010

Thermal Detection Of Biomarkers Using Phase Change Nanoparticles, Chaoming Wang

Electronic Theses and Dissertations

Most of existing techniques cannot be used to detect molecular biomarkers (i.e., protein and DNA) contained in complex body fluids due to issues such as enzyme inhibition or signal interference. This thesis describes a nanoparticle-based thermal detection method for the highly sensitive detections of multiple DNA biomarkers or proteins contained in different type of fluids such as buffer solution, cell lysate and milk by using solid-liquid phase change nanoparticles as thermal barcodes. Besides, this method has also been applied for thrombin detection by using RNA aptamer-functionalized phase change nanoparticles as thermal probes. Furthermore, using nanostructured Si surface that have higher …

Go to article

Exploring Earth-Building Technology For Liberia., Isaac Dompo Mayon Aug 2009

Exploring Earth-Building Technology For Liberia., Isaac Dompo Mayon

Electronic Theses and Dissertations

This paper discusses earth as a building material and the extent to which earth building technology has evolved over the years. In particular it addresses the adobe, compressed and rammed earth techniques of earth building as suitable techniques for Liberia consumption. In addition, the paper investigates the suitability of the Latosols soils of Liberia for earth building construction purposes using standardized earth building principles and requirements. A local Johnson City, Tennessee, earth sample found to have the same physical characteristics of the Latosols of Liberia was used to simulate Liberia soils to produce specimen blocks at different configurations of moisture …

Go to article

Short-Term Failure Analysis Of Aluminum Conducting Composite Core Transmission Lines, Brian Burks Aug 2009

Short-Term Failure Analysis Of Aluminum Conducting Composite Core Transmission Lines, Brian Burks

Electronic Theses and Dissertations

Recently the inefficiency and lack of capabilities of electric energy transmission have been put in the global spotlight; a transmission line design known as the Aluminum Conducting Composite Core Trapezoidal Wire (ACCC/TWTM) attempts to eliminate the deficiencies. The ACCC core is comprised of a new hybrid composite material. The most probable causes of short-term damage to the ACCC core were investigated through a series of finite element models. It was found that excessive bending was the most likely cause of short-term damage to the core. During bending of the ACCC core, stresses are concentrated at the interface in …

Go to article

Phase-Field Simulation Of Microstructural Development Induced By Interdiffusion Fluxes Under Multiple Gradients, Rashmi Mohanty Jan 2009

Phase-Field Simulation Of Microstructural Development Induced By Interdiffusion Fluxes Under Multiple Gradients, Rashmi Mohanty

Electronic Theses and Dissertations

The diffuse-interface phase-field model is a powerful method to simulate and predict mesoscale microstructure evolution in materials using fundamental properties of thermodynamics and kinetics. The objective of this dissertation is to develop phase-field model for simulation and prediction of interdiffusion behavior and evolution of microstructure in multiphase binary and ternary systems under composition and/or temperature gradients. Simulations were carried out with emphasis on multicomponent diffusional interactions in single-phase system, and microstructure evolution in multiphase systems using thermodynamics and kinetics of real systems such as Ni-Al and Ni-Cr-Al. In addition, selected experimental studies were carried out to examine interdiffusion and microstructure …

Go to article

Multicomponent Interdiffusion In Austenitic Ni-, Fe-Ni-Base Alloys And L12-Ni3al Intermetallic For High-Temperature Applications, Narayana Garimella Jan 2009

Multicomponent Interdiffusion In Austenitic Ni-, Fe-Ni-Base Alloys And L12-Ni3al Intermetallic For High-Temperature Applications, Narayana Garimella

Electronic Theses and Dissertations

Interdiffusion in multicomponent-multiphase alloys is commonly encountered in many materials systems. The developments of multicomponent-multiphase alloys require control of microstructure through appropriate heat treatment, involving solid-state transformations, precipitation processes, and surface modification, where the interdiffusion processes play a major role. In addition, interdiffusion processes often control degradation and failure of these materials systems. Enhanced performance and reliable durability always requires a detailed understanding of interdiffusion. In this study, ternary and quaternary interdiffusion in Ni-Cr-X (X = Al, Si, Ge, Pd) at 900°C and 700°C, Fe-Ni-Cr-X (X = Si, Ge) at 900°C, and Ni3Al alloyed with Ir, Ta and Re at …

Go to article

Formation Of Lyotropic Liquid Crystals Through The Self-Assembly Of Bile Acid Building Blocks, Karan Tamhane Jan 2009

Formation Of Lyotropic Liquid Crystals Through The Self-Assembly Of Bile Acid Building Blocks, Karan Tamhane

Electronic Theses and Dissertations

Liquid crystalline materials (LCMs) have gained much popularity over the past century. The thermotropic forms of these materials have been extensively studied and employed in a range of innovative applications. The lyotropic liquid crystal systems that have been studied in the past have often been formed by the organization of natural and synthetic small molecules in solutions. In this study, we use self-assembled supramolecular structures as building blocks to fabricate lyotropic liquid crystals. We investigate the self-assembly of a naturally occurring bile acid called lithocholic acid (LCA), to form supramolecular fibrous and tubular structures in basic aqueous solutions. We control …

Go to article

Electronic Properties And Microstructures Of Amorphous Sicn Ceramics Derived From Polymer Precursors, Tao Jiang Jan 2009

Electronic Properties And Microstructures Of Amorphous Sicn Ceramics Derived From Polymer Precursors, Tao Jiang

Electronic Theses and Dissertations

Polymer-derived ceramics (PDCs) are a new class of high-temperature materials synthesized by thermal decomposition of polymeric precursors. These materials possess many unique features as compared with conventional ceramics synthesized by powder metallurgy based processing. For example, PDCs are neither amorphous nor crystalline. Instead, they possess nano-domain structures. Due to the direct chemical-to-ceramic processing, PDCs can be used for making components and devices with complex shapes. Thus, understanding the properties and structures of these materials are of both fundamental and practical interest. In this work, the structures and electronic behavior of polymer-derived amorphous silicon carbonitrides (SiCNs) were investigated. The materials were …

Go to article

Characterization And Aqueous Colloidal Processing Of Tungsten Nano-Powders, Zhengtao Yang Jan 2009

Characterization And Aqueous Colloidal Processing Of Tungsten Nano-Powders, Zhengtao Yang

Electronic Theses and Dissertations

Extensive attention has been paid to consolidate nanoparticles into nanocrystalline components that possess better properties than their coarse-grained counterparts. Nanocrystalline monolithic tungsten (W) has been envisaged to possess better properties than coarse-grained tungsten and to improve the performance of many military components. Commercially available nano-W powders were characterized via X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), Auger electron spectroscopy (AES) and Brunauer, Emmett, and Teller (BET) measurement. While the bulk of nano-W powders consisted of bcc-W as confirmed by XRD and TEM, much of their surface consisted of WO3 with traces of …

Go to article

Sintering Additives For Nanocrystalline Titania And Processing Of Porous Bone Tissue Engineering Scaffolds, Arun Menon Jan 2009

Sintering Additives For Nanocrystalline Titania And Processing Of Porous Bone Tissue Engineering Scaffolds, Arun Menon

Electronic Theses and Dissertations

Titania (Titanium dioxide, TiO2) has been researched as a promising biomaterial due to its excellent biocompatibility. However, the main limitation of titania is its poor mechanical properties which limit its use in many load-bearing applications. In this thesis report, the properties of titania were improved by doping with small quantities of MgO, ZnO and SiO2 as sintering additives. Nanocrystalline powder was selected, as it possesses outstanding properties over conventional coarse-grained powders due to reduced grain size. Nanocrystalline anatase powder of size 5-15 nm was synthesized via a simple sol-gel technique. Small quantities of dopants were introduced into pure titania powder, …

Go to article

Classical Size Effect In Copper Thin Films: Impact Of Surface And Grain Boundary Scattering On Resistivity, Tik Sun Jan 2009

Classical Size Effect In Copper Thin Films: Impact Of Surface And Grain Boundary Scattering On Resistivity, Tik Sun

Electronic Theses and Dissertations

Surface and grain boundary electron scattering contribute significantly to resistivity as the dimensions of polycrystalline metallic conductors are reduced to, and below, the electron mean free path. A quantitative measurement of the relative contributions of surface and grain boundary scattering to resistivity is very challenging, requiring not only the preparation of suitably small conductors having independent variation of the two relevant length scales, namely, the sample critical dimension and the grain size, but also independent experimental quantification of these two length scales. In most work to date the sample grain size has been either assumed equal to conductor dimension or …

Go to article

Vibrational And Mechanical Properties Of 10 Mol % Sc2o3-1 Mol % Ceo2- Zro2 Electrolyte Ceramics For Solid Oxide Fuel Cells, Svetlana Lukich Jan 2009

Vibrational And Mechanical Properties Of 10 Mol % Sc2o3-1 Mol % Ceo2- Zro2 Electrolyte Ceramics For Solid Oxide Fuel Cells, Svetlana Lukich

Electronic Theses and Dissertations

Solid Oxide Fuel Cells (SOFCs) are emerging as a potential breakthrough energy conversion technology for clean and efficient production of electricity and heat from hydrogen and hydrocarbon fuels. Sc0.1Ce0.01ZrO2 electrolytes for Solid Oxide Fuel Cells are very promising materials because their high ionic conductivity in the intermediate temperature range 700°C-800°C. The vibration response of cubic and rhombohedral (β) 10 mol%Sc2O3 - 1 mol%CeO2 - ZrO2(Sc0.1Ce0.01ZrO2 ) both at room and high-temperatures is reported. The in-situ heating experiments and ex-situ indentation experiments were performed to characterize the vibrational behavior of these important materials. A temperature and stress-assisted phase transition from cubic …

Go to article

Probing And Tuning The Size, Morphology, Chemistry And Structure Of Nanoscale Cerium Oxide, Satyanarayana Kuchibhatla Jan 2008

Probing And Tuning The Size, Morphology, Chemistry And Structure Of Nanoscale Cerium Oxide, Satyanarayana Kuchibhatla

Electronic Theses and Dissertations

Cerium oxide (ceria)-based materials in the nanoscale regime are of significant fundamental and technological interest. Nanoceria in pure and doped forms has current and potential use in solid oxide fuel cells, catalysis, UV- screening, chemical mechanical planarization, oxygen sensors, and bio-medical applications. The characteristic feature of Ce to switch between the +3 and + 4 oxidation states renders oxygen buffering capability to ceria. The ease of this transformation was expected to be enhanced in the nanoceria. In most the practical scenarios, it is necessary to have a stable suspension of ceria nanoparticles (CNPs) over longer periods of time. However, the …

Go to article

N Multilayer Thin Film Reactions To Form L10 Fept And Exchange Spring Magnets, Bo Yao Jan 2008

N Multilayer Thin Film Reactions To Form L10 Fept And Exchange Spring Magnets, Bo Yao

Electronic Theses and Dissertations

FePt films with the L10 phase have potential applications for magnetic recording and permanent magnets due to its high magnetocrystalline anisotropy energy density. Heat treatment of n multilayer films is one approach to form the L10 FePt phase through a solid state reaction. This thesis has studied the diffusion and reaction of n multilayer films to form the L10 FePt phase and has used this understanding to construct exchange spring magnets. The process-structure-property relations of n multilayer films were systematically examined. The transmission electron microscopy (TEM) study of the annealed multilayers indicates that the Pt layer grows at the expense …

Go to article

First Prev Next Last