Materials Science and Engineering Commons^™

Fabrication And Study Of Molecular Devices And Photovoltaic Devices By Metal/Dielectric/Metal Structures, Bing Hu

University of Kentucky Doctoral Dissertations

A new class of electrodes with nanometer-scale contact spacing can be produced at the edge of patterned metal/insulator/metal this film structures. A key challenge is to produce insulator layers with low leakage current and have pristine metal contacts for controlled molecular contacts. Atomic layer deposition of high quality Al₂O₃ thin films onto Au electrodes was enabled by surface modification with a self-assembled monolayer of -OH groups that react with a monolayer of trimethylaluminum gas source. Ar ion milling was then used to expose the edge of the Au/dielectric/Au structure for molecular electrode contacts. The junctions are characterized …

Studies On Silicon Nmr Characterization And Kinetic Modeling Of The Structural Evolution Of Siloxane-Based Materials And Their Applications In Drug Delivery And Adsorption, Jyotrhirmai Ambati

University of Kentucky Doctoral Dissertations

This dissertation presents studies of the synthetic processes and applications of siloxane-based materials. Kinetic investigations of bridged organoalkoxysilanes that are precursors to organic-inorganic hybrid polysilsesquioxanes are a primary focus. Quick gelation despite extensive cyclization is found during the polymerization of bridged silane precursors except for silanes with certain short bridges. This work is an attempt to characterize and understand some of the distinct features of bridged silanes using experimental characterization, kinetic modeling and simulation. In addition to this, the dissertation shows how the properties of siloxane- materials can be engineered for drug delivery and adsorption.

The phase behavior of polymerizing …

Nanostructured Arrays For Sensing And Energy Storage Applications, Raghu Mangu

University of Kentucky Doctoral Dissertations

Vertically aligned multi walled carbon nanotube (MWCNT) arrays fabricated by xylene pyrolysis in anodized aluminum oxide (AAO) templates without the use of a catalyst, were integrated into a resistive sensor design. The steady state sensitivities as high as 5% and 10% for 100 ppm of NH₃ and NO₂ respectively at a flow rate of 750 sccm were observed. A study was undertaken to elucidate (i) the dependence of sensitivity on the thickness of amorphous carbon layers, (ii) the effect of UV light on gas desorption characteristics and (iii) the dependence of room temperature sensitivity on different NH_{3 …}

Localized Mechanical Deformation And Dissolution Of 45s5 Bioglass, Ding Li

University of Kentucky Doctoral Dissertations

Bioactive glasses react with the human physiological solution in control of their biofunctionality. The stress state in bioactive glasses determines the chemomechanical reaction and their biofunctionality. Using the microindentation technique, the effect of the indentation deformation on the surface damage and material dissolution of 45S5 bioglass was investigated.

The indentation-induced residual stresses were calculated. Complete anelastic recoveries of the indentation depths and the impression marks were observed for the first time, which was likely driven by the stored strain energy over the anelastic deformation zone. The indentation-induced local surface damages were revealed before and after the immersion tests in phosphate …

Preparation And Hydrogen Absorption/Desorption Of Nanoporous Palladium Thin Films, Wen-Chung Li, Thomas John Balk

Chemical and Materials Engineering Faculty Publications

Nanoporous Pd (np-Pd) was prepared by co-sputtering Pd-Ni alloy films onto Si substrates, followed by chemical dealloying with sulfuric acid. X-ray diffractometry and chemical analysis were used to track the extent of dealloying. The np-Pd structure was changed from particle-like to sponge-like by diluting the sulfuric acid etchant. Using suitable precursor alloy composition and dealloying conditions, np-Pd films were prepared with uniform and open sponge-like structures, with interconnected ligaments and no cracks, yielding a large amount of surface area for reactions with hydrogen. Np-Pd films exhibited shorter response time for hydrogen absorption/desorption than dense Pd films, showing promise for hydrogen …

Aligned Nanotubule Membranes, Bruce J. Hinds Iii

Chemical and Materials Engineering Faculty Patents

A method is provided for producing a permeable membrane, comprising the steps of aligning a plurality of hollow nanotubules to form a mat, coating the mat with a continuous polymer matrix to form a membrane. The membrane is etched (a) to open the plurality of hollow nanotubules and form pores and (b) to oxidize the carboxyl groups to carboxylate groups. At least one additional functional unit having at least one available amine group to bind the at least one additional functional unit to the nanotubule end carboxylate group may be provided. Membranes fabricated in accordance with the method of the …

Methods For Cancer Detection, Kimberly W. Anderson, Kimberly M.L. May, Leonidas G. Bachas

Chemical and Materials Engineering Faculty Patents

A method is provided for detecting an analyte indicative of a cancer or a metastatic disease condition, which utilizes the ability of the analyte to induce permeability in a barrier. The method includes providing a biosensor having a barrier which is substantially impermeable to an ion, a permeable membrane which is selective for the ion, and a detector capable of detecting the ion. The biosensor is contacted with a sample including at least one of the ion and the analyte, wherein the analyte causes at least a portion of the ion to pass through the barrier and the membrane. Passage …

Carbon Nanotube Membranes For Use In The Transdermal Treatment Of Nicotine Addiction And Opioid Withdrawal Symptoms, Caroline L. Strasinger, Nicole N. Scheff, Ji Wu, Bruce J. Hinds, Audra L. Stinchcomb

Pharmaceutical Sciences Faculty Publications

Transdermal systems are attractive methods of drug administration specifically when treating patients for drug addiction. Current systems however are deficient in therapies that allow variable flux values of drug, such as nicotine for smoking cessation or complex dosing regimens using clonidine when treating opioid withdrawal symptoms. Through the use of functionalized carbon nanotube (CNT) membranes, drug delivery to the skin can be controlled by applying a small electrical bias to create a programmable drug delivery system. Clearly, a transdermal patch system that can be tailored to an individual's needs will increase patient compliance as well as provide much more efficient …

Microstructural Evolution And Physical Behavior Of Palladium And Osmium-Ruthenium Noble Metal Films, Wen-Chung Li

University of Kentucky Doctoral Dissertations

Nanostructured noble metals exhibit novel physical, mechanical and chemical behavior, and hold promise for applications such as gas sensing and electron emission. A strong emphasis was placed on the processing and characterization of these materials, in the form of nanoporous or nanocrystalline thin films. Palladium-based and osmium-ruthenium alloys were investigated in this dissertation research and will be presented as follows:

(1) Preparation and Characterization of Nanoporous Metal Thin Films

(2) Characterization of Osmium-Ruthenium Coatings

Nanoporous palladium (np-Pd) thin films were prepared by dealloying co-sputtered palladium-nickel precursor alloys. Nanoporous structures were created with 3-D interconnected ligaments and open pores. Size of …

Thermal Degradation And Aging Of High Temperature Piezoelectric Ceramics, Sunil W. Gotmare

University of Kentucky Master's Theses

Piezoelectric materials have numerous applications like high temperature accelerometers, pressure, flow and NDT transducers, acoustic emission, ultrasonic cleaning, welding, high voltage generators, medical therapy etc. The commonly used piezoelectric material, PZT continues to dominate the commercial market for piezoelectric actuators applications. The primary limitations of PZT are the lower Curie temperature T_C <390^oC and rapid thermal degradation avobe 200^oC.

Continuing efforts are focused on the development of piezoelectric materials suitable for high temperature applications >200^oC. These materials will be very useful for making sensors for space exploration, oil and geothermal well drilling tools, oil …

Linking The Structure And Mechanical Behavior Of Nanoporous Gold, Ye Sun

University of Kentucky Doctoral Dissertations

The structure of nanoporous gold (np-Au) provides a very limited volume for deformation to occur, and thus offers an opportunity to study the role of defects such as dislocations in nanoscale metal volumes. A practical goal is to understand mechanical properties of np-Au so that it can be can produced in stable form, for use in applications that require some mechanical integrity. Bulk and thin film np-Au have been fabricated and studied here.

Bulk np-Au was prepared by electrochemically dealloying Au-Ag alloys with 25 and 30 at.% Au. In the lower Au content material, cracks always formed during dealloying. When …

Delivery System For A Composition, Bruce J. Hinds Iii, Audra L. Stinchcomb

Chemical and Materials Engineering Faculty Patents

Devices and methods for cutaneous delivery of a composition are provided, wherein the composition is passed through an ordered nanoporous membrane in fluid communication with a reservoir. The nanoporous membrane includes a plurality of aligned hollow nanotubules coated with a continuous polymer matrix, and etched to open the plurality of hollow nanotubules and form pores. In one embodiment, the etching step oxidizes an end of the nanotubules to form carboxylate groups. The ordered nanoporous membrane further includes at least one additional functional unit bound to the carboxylate groups. The at least one additional functional unit selectively exposes or at least …

Hydrologic Properties Of Pervious Concrete, Joe D. Luck, Stephen R. Workman, Stephen F. Higgins, Mark S. Coyne

Plant and Soil Sciences Faculty Publications

Pervious concrete is concrete made by eliminating most or all of the fine aggregate (sand) in the concrete mix, which allows interconnected void spaces to be formed in the hardened product. These interconnected void spaces allow the concrete to transmit water at relatively high rates. The main objective of this project was to conduct research on the potential application of pervious concrete in agricultural settings, specifically for use in animal feed lots, manure storage pads, animal manure and bedding compost facilities, or floor systems in animal buildings. Laboratory tests were conducted on replicated samples of pervious concrete formed from two …

Co2-Selective Membranes Containing Amino Groups, W.S. Winston Ho

Chemical and Materials Engineering Faculty Patents

Novel compositions suitable for fabrication of CO₂-selective membranes are disclosed. In one aspect, the present invention is directed to compositions comprising polyimide/polyamine blends and copolymers, and to compositions comprising interfacially polymerized polyamides. In another aspect this invention is directed to novel CO₂-selective membranes comprising such polyimide/polyamine blends and copolymers, and to novel CO₂-selective membranes comprising interfacially polymerized polyamides. In yet another aspect, the present invention is directed to a novel water-gas-shift (WGS) reactor comprising the novel CO₂-selective membranes. Advantageously, the use of the novel CO₂-selective membrane allows alteration of the …

Dynamic Sulfur Tolerant Process And System With Inline Acid Gas-Selective Removal For Generating Hydrogen For Fuel Cells, Surjit Randhava, W. S. Winston Ho, Richard L. Kao, Elias H. Camara

Chemical and Materials Engineering Faculty Patents

This invention relates to a sulfur tolerant, dynamic, compact, lightweight fuel process and system that is capable of converting sulfur bearing carbonaceous fuels to hydrogen rich gases suitable for fuel cells or chemical processing applications. The process and system is based on the AHR and WGS reactions, followed by cleanup of byproduct sulfur-containing gases and carbon oxides that would otherwise poison the fuel cell electrocatalyst. Advantageously, this is accomplished via an ASMS and a methanator or an AWMR. The process and system preferably uses a special sulfur tolerant catalysts and hardware designs that enable the conversion in an energy efficient …

Selective Growth Of Carbon Nanotubes And Oxide Nanowires: Applications In Shadow Lithography And Fabrication Of Aligned Carbon Nanotube Membranes, Nitin Chopra

University of Kentucky Doctoral Dissertations

A promising approach investigated here is to utilize thin film multilayer structures where the thickness of a catalyst layer at an exposed edge of photolithographically defined pattern determines the diameter of the nanotubes/nanowires grown from it. This can in turn be incorporated into photolithographically defined post structures resulting in an array of suspended nanowires for line-of-site shadow lithography. Success of the diameter control approach has been shown by selectively growing carbon nanotubes (CNTs) from narrow lines (12-60 nm) of SiO₂, Fe, Ni, Co on micron-scale patterned substrates in a ferrocene or nonferrocene catalyzed CVD process. In addition, the …

Catalytic Conversion Of Hydrocarbons To Hydrogen And High-Value Carbon, Naresh Shah, Devadas Panjala, Gerald P. Huffman

Chemical and Materials Engineering Faculty Patents

The present invention provides novel catalysts for accomplishing catalytic decomposition of undiluted light hydrocarbons to a hydrogen product, and methods for preparing such catalysts. In one aspect, a method is provided for preparing a catalyst by admixing an aqueous solution of an iron salt, at least one additional catalyst metal salt, and a suitable oxide substrate support, and precipitating metal oxyhydroxides onto the substrate support. An incipient wetness method, comprising addition of aqueous solutions of metal salts to a dry oxide substrate support, extruding the resulting paste to pellet form, and calcining the pellets in air is also discloses. In …

Apparatus And Method For Dispersing Nano-Elements To Assemble Device, Craig A. Grimes, Elizabeth Dickey

Chemical and Materials Engineering Faculty Patents

An apparatus for dispersing a first plurality of conductive elongated nano-elements distributed within a carrier-fluid to assemble a conductive device made of a first charge-receptive area of a support surface to which at least one nano-element has attached, including: a nozzle through which the elongated nano-elements are directed such that the nano-elements pass through an electromagnetic field for imparting a preselected charge thereto, and toward at least the first charge-receptive area. The charge-receptive area is given a charge such that it attracts a first end-portion of one of the nano-elements. Also, a method of assembling a conductive device. Steps include: …

Temperature, Stress, And Corrosive Sensing Apparatus Utilizing Harmonic Response Of Magnetically Soft Sensor Element (S), Craig A. Grimes, Keat Ghee Ong

Chemical and Materials Engineering Faculty Patents

A temperature sensing apparatus including a sensor element made of a magnetically soft material operatively arranged within a first and second time-varying interrogation magnetic field, the first time-varying magnetic field being generated at a frequency higher than that for the second magnetic field. A receiver, remote from the sensor element, is engaged to measure intensity of electromagnetic emissions from the sensor element to identify a relative maximum amplitude value for each of a plurality of higher-order harmonic frequency amplitudes so measured. A unit then determines a value for temperature (or other parameter of interst) using the relative maximum harmonic amplitude …

Method Of Preparing A Composite Polymer And Silica-Based Membrane, Dibakar Bhattacharyya, Stephen M. Ritchie, Leonidas G. Bachas, Jamie A. Hestekin, Subhas K. Sikdar

Chemical and Materials Engineering Faculty Patents

A method for preparing a chemically activated or polyamino acid functionalized membrane includes the steps of permeating a silica-based membrane with a solution of silane and a solvent so as to react methoxy groups of the silane with silanol groups of the membrane to incorporate epoxide groups and attaching a polyamino acid to the membrane by reacting a terminal amine group of the polyamino acid with one of the epoxide groups on the membrane.

Preparing And Regenerating A Composite Polymer And Silica-Based Membrane, Dibakar Bhattacharyya, Stephen M. Ritchie, Leonidas G. Bachas, Jamie A. Hestekin, Subhas K. Sikdar

Chemical and Materials Engineering Faculty Patents

A method for preparing and regenerating a chemically activated or polyamino acid functionalized membrane includes the steps of permeating the silica-based membrane with a solution of silane and a solvent so as to react methoxy groups of the silane with silanol groups of the membrane to incorporate epoxide groups and attaching a polyamino acid to the membrane by reacting a terminal amine group of the polyamino acid with one of the epoxide groups on the membrane. The membrane is regenerated after metal entrapment by utilizing helix-coil properties of polyamino acids.

Electrically-Small Low Q Radiator Structure And Method Of Producing Em Waves Therewith, Craig A. Grimes, Dale M. Grimes, Faton Tefiku, Gang Lui

Chemical and Materials Engineering Faculty Patents

An electrically small radiator structure for radiating electromagnetic waves having an electrical size, k*a, with a value less than π/2 and above π/20,000 and configured to have at least a first and second magnetic, or electric, dipole element. Dipole elements are preferably oriented such that a source-associated standing energy value for the structure, or W_ds(t_R), is low, Radiative Q value preferably less than ⅓(k*a)³; and each of the elements, whether paired with respective electric dipole elements, is in electrical communication through a feed circuit to at least one power source. Further, a first …

Remote Magneto-Elastic Analyte, Viscosity And Temperature Sensing Apparatus And Associated Methods Of Sensing, Craig A. Grimes, Plamen G. Stoyanov

Chemical and Materials Engineering Faculty Patents

An analyte, viscosity, or temperature sensing apparatus for operative arrangement within a time-varying magnetic field, including a sensor with an outer surface that is chemically, frictionally, or thermally responsive and adhered to a base magnetostrictive element, and a receiver to measure a first and second value for magneto-elastic emission intensity of the sensor taken at, respectively, a first and second interrogation frequency. A change in mass or a change in material stiffness of the sensor due to the responsiveness, the viscosity and mass density of a fluid therearound, or the temperature, can be identified. The receiver, alternatively, measures a plurality …

Magnetoelastic Sensing Apparatus And Method For Remote Pressure Query Of An Environment, Craig A. Grimes, Plamen G. Stoyanov, Dimitris Kouzoudis

Chemical and Materials Engineering Faculty Patents

A pressure sensing apparatus for operative arrangement within an environment, having: a sensor comprising a hermetically-sealed receptacle, at least one side of which has an flexible membrane to which a magnetically hard element is attached. Enclosed within the receptacle is a magnetostrictive element that vibrates in response to a time-varying magnetic field. Also included is a receiver to measure a plurality of successive values for magneto-elastic emission intensity of the sensor taken over an operating range of successive interrogation frequencies to identify a resonant frequency value for the sensor. Additional features include: (a) the magnetically hard element may be adhered …

Remote Resonant-Circuit Analyte Sensing Apparatus With Sensing Structure And Associated Method Of Sensing, Craig A. Grimes

Chemical and Materials Engineering Faculty Patents

A resonant sensing apparatus for operative arrangement within a test environment to sense an analyte. A sensing structure is included having an antenna in electrical communication with a resonant circuit and a structural element made of a material that selectively responds to the analyte. This sensing structure will resonate at a particular characteristic resonant frequency in the presence of an applied interrogation electromagnetic field and the analyte upon the occurrence of the selective response. A receiver is used for remotely identifying a value for the characteristic resonant frequency by measuring a plurality of values for electromagnetic emission intensity of the …

Silica-Based Membrane Sorbent For Heavy Metal Sequestration, Dibakar Bhattacharyya, Stephen M. Ritchie, Leonidas G. Bachas, Jamie A. Hestekin, Subhas K. Sikdar

Chemical and Materials Engineering Faculty Patents

An apparatus providing for metal ion/nitrate entrapment comprises a chemically activated, microfiltration, composite polymer and silica-based membrane including a polyamino acid attached thereto through reaction of a terminal amine group of the polyamino acid with the membrane. A method for preparing such a chemically activated or polyamino acid functionalized membrane includes the steps of permeating the silica-based membrane with a solution of silane and a solvent so as to react methoxy groups of the silane with silanol groups of the membrane to incorporate epoxide groups and attaching a polyamino acid to the membrane by reacting a terminal amine group of …

Process For Making A Lubricating Composition, Stephen J. Miller, Gerald P. Huffman, Naresh Shah

Chemical and Materials Engineering Faculty Patents

The invention includes a process of making a lubricating oil composition including: a process for making a high VI lubricating oil composition including the steps of (1) contacting a waste plastics feed including mainly polyethylene in a pyrolysis zone at pyrolysis conditions, whereby at least a portion of the waste plastics feed is cracked, thereby forming a pyrolysis zone effluent including 1-olefins and n-paraffins; (2) passing the pyrolysis zone effluent, including a heavy fraction and a middle fraction, the pyrolysis effluent middle fraction including 1-olefins, to a separations zone; where the pyrolysis effluent heavy fraction portion is separated from the …

Texture, Microstructure And Formability Of Aluminum Alloys, Xiang-Ming Cheng

University of Kentucky Doctoral Dissertations

Texture, microstructure and formability were studied in Direct Chill Cast (DC) and Strip Cast (SC) aluminum alloys with regard to crystallographic anisotropy, the Portevin-Le Chatelier effect and aging softening behavior. It was found that material properties change greatly with manufacturing processes (DC vs. SC) and chemical composition (3xxx vs. 5 xxx alloys). DC cast hot band materials are usually fully recrystallized and have strong softening textures while SC hot band materials have a rolling structure with strong deformation textures. Softening textures cause 90 earing while deformation textures result in 45 earing after deep drawing. During cold rolling, 90 earing in …

Method For Making A Heavy Wax Composition, Stephen J. Miller, Gerald P. Huffman, Naresh Shah

Chemical and Materials Engineering Faculty Patents

The invention includes a process of making a wax composition including: a process for making a heavy wax composition including the steps of (1) contacting a waste plastics feed containing primarily polyethylene in a pyrolysis zone at sub-atmospheric pressure, whereby at least a portion of the waste plastics feed is cracked, thereby forming a pyrolysis zone effluent including 1-olefins and n-paraffins; and (2) passing the pyrolysis zone effluent to a hydrotreating zone, for contacting with a hydrotreating catalyst at catalytic conditions.

Membrane-Based Sorbent For Heavy Metal Sequestration, Dibakar Bhattacharyya, Leonidas G. Bachas, Lawrence Cullen, Jamie A. Hestekin, Subhas K. Sikdar

Chemical and Materials Engineering Faculty Patents

A process is provided for making membrane-based sorbents with enhanced binding activity that are particularly useful for heavy metal sequestration. The process includes the step of selectively hydrolyzing a polyacetylated membrane in order to deacetylated a surface layer of said membrane including the pore surfaces and expose free hydroxyl groups. This is followed by the oxidizing of the hydroxyl groups to aldehyde groups. This is then followed by the attaching of a polycarboxylic acid such as a polyamino acid, polyalkenoic acid or polypeptide to the membrane through the aldehyde groups. Preferably, the hydrolyzing step is completed under alkaline conditions and …