Open Access. Powered by Scholars. Published by Universities.®

Materials Science and Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Power and Energy

Institution
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 1201 - 1230 of 1351

Full-Text Articles in Materials Science and Engineering

Effect Of High Concentration Lithium Bromide Solution On Electrochemical Behavior Of Low Alloy Steel At High Temperature, Jian-Wei Guo, Cheng-Hao Liang Nov 2000

Effect Of High Concentration Lithium Bromide Solution On Electrochemical Behavior Of Low Alloy Steel At High Temperature, Jian-Wei Guo, Cheng-Hao Liang

Journal of Electrochemistry

By electrochemical measurements and weight loss experiments, the effect of MoO42- on low alloy steel's electrochemical behaviors was investigated at high temperature in 55%LiBr+0.07 mol/L LiOH solution. The results showed that MoO42-, as an anodic inhibitor, formed passive film rapidly and impeded both anodic and cathodic procedures. Moreover, Na2MoO4 prevented corrosion effectively in 55%LiBr+0.07 mol/L LiOH solution when its concentration is more than 200 mg/L. The pitting potential increased accompanying to the arising of Na2MoO4 concentration. Some elements of alloy strengthened resistance to corrosion, shch as chromium and nickel, …

Go to article

Studies Of Adsorption And Oxidation Of Ethanol On Nm-Pt/Gc Electrode——I. Cyclic Voltammograms And In-Situ Ftir Spectroscopy In Alkaline Media, Guo-Lian Chen, Shi-Gang Sun, Sheng-Pei Chen, Zhi-You Zhou Nov 2000

Studies Of Adsorption And Oxidation Of Ethanol On Nm-Pt/Gc Electrode——I. Cyclic Voltammograms And In-Situ Ftir Spectroscopy In Alkaline Media, Guo-Lian Chen, Shi-Gang Sun, Sheng-Pei Chen, Zhi-You Zhou

Journal of Electrochemistry

The electro-oxidation of ethanol on nm-Pt/GC electrode in alkaline solutions containing 0.02 mol·L-1 NaOH+0.1 mol·L-1 CH3CH2OH was investigated by using cyclic voltammetry and in-situ FTIR spectroscopy. The experimental results demonstrated that the main product of ethanol oxidation is CH3COO-, only very small amount of CH 3CHO has been determined simultaneously. In contrast with the dual path reaction mechanism for the oxidation of ethanol in acid media, the oxidation of ethanol in alkaline media didn't pass through the dissociative adsorption, and no adsorbed species could be determined even using a …

Go to article

Investigation Of A Complex Lithium Cobalt Nickel Oxide As Lithium Ion Battery Cathode Materials Prepared By A New Citrate Sol-Gel Method, Jing-Li Han, Qing-Guo Liu Nov 2000

Investigation Of A Complex Lithium Cobalt Nickel Oxide As Lithium Ion Battery Cathode Materials Prepared By A New Citrate Sol-Gel Method, Jing-Li Han, Qing-Guo Liu

Journal of Electrochemistry

The synthesis and electrochemical characteristics of lithium cobalt nickel oxide as cathode materials for rechargeable lithium batteries were investigated. It was clarified from these investigations that lithium cobalt nickel oxide has been produced from basic cobalt carbonate,basic nickel carbonate, lithium carbonate, and citrate. LiNi0.8Co 0.2O2 prepared under the stream of oxygen gas showed a higher cycling capacity of (～190 mAh·g-1).

Go to article

Cathodic Indirect Oxidation Of Organic Compounds(Ⅱ)——Cathodic Indirect Epoxidation Of Olefine, Xue-Ying Zhang, Bao-Qiu Cui, Deng-Ping Gu, Wei Li Aug 2000

Cathodic Indirect Oxidation Of Organic Compounds(Ⅱ)——Cathodic Indirect Epoxidation Of Olefine, Xue-Ying Zhang, Bao-Qiu Cui, Deng-Ping Gu, Wei Li

Journal of Electrochemistry

We described a novel cathodic indirect epoxidation system in which O2 was first cathodically reduced to H2O2. Then VO(acac)2 was oxidized by H2O2 homogeneously to VO(acac)2OOH which was used to epoxidize some olefine such as maleic, fumaric and crotonic acids. Many affecting factors on the current efficiency were optimized. The research will contribute to the developments of organic electrosynthesis.

Go to article

A Study On The Cylindrical Zinc-Air Battery, Sheng-Sian Li, Gui-Mao Zhou, Xin-Ping Ai, Han-Xi Yang Aug 2000

A Study On The Cylindrical Zinc-Air Battery, Sheng-Sian Li, Gui-Mao Zhou, Xin-Ping Ai, Han-Xi Yang

Journal of Electrochemistry

The zinc air battery has advantages of high specific energies and low cost, therefore attracts much interests. However, its application is limited only in prismatic and button type.This paper reported a novel design of cylindrical zinc air batteries and the performances of the batteries tested at various conditions. The results showed that when discharged at the current of 40 mA at 20 °C, the capacity of AA size and AAA size batteries reached 4000mAh and 1400mAh respectively, corresponding to the energy densities 280 Wh/kg and 200 Wh/kg. The effects of the discharge current, temperature and humidity on the performances of …

Go to article

Studies Of The LialYNi1-YO2 As Cathode Materials For Rechargeable Lithium Ion Batteries, Xiao-Gan Li, Wei-Hua Qiu, Chuan-Gang Lin, Qing-Guo Liu Aug 2000

Studies Of The LialYNi1-YO2 As Cathode Materials For Rechargeable Lithium Ion Batteries, Xiao-Gan Li, Wei-Hua Qiu, Chuan-Gang Lin, Qing-Guo Liu

Journal of Electrochemistry

In this paper, we have synthesized series of single-phase LiAlyNi1-yO2 (differentive in value-y) by solid reaction. Through examining their electrothemical properties, found that, under a proper sintering condition, LixAl0.25Ni0.75O2 solution for cathode materials of rechargeable lithium ion batteries showed more pleasing properties in overcharge-resist and cycling life (vs LiNiO2). When x>1, the capacity can be kept 125mAh/g after 30 cycles under higher charged/discharged voltages ranging from 3.0 V to 4.8 V, whereas that of pure LiNiO2 has only 61 nAh/g after 25 cycles. The …

Go to article

The Study On Lithiated Titanium Composite Oxides As Negative Electrode For Lithium-Ion Battery, Xiao-Yan Yang, Shou-Nan Hua, Shu-Yong Zhang Aug 2000

The Study On Lithiated Titanium Composite Oxides As Negative Electrode For Lithium-Ion Battery, Xiao-Yan Yang, Shou-Nan Hua, Shu-Yong Zhang

Journal of Electrochemistry

Lithiated titanium composite oxides Li4Ti5O12 were prepared from Li2CO3 and TiO2. The XRD results of this composite oxides indicated that the compound had a spinel structure. The electrochemical behavior of lithiated titanium composite oxides was examined. The results showed that this material had an excellent cyclic capability and reversibility for lithium insertion, and had high specific capacity: the initial discharge capacity was 300 mAh·g-1 , and the reversible capacity was 100 mAh·g-1 . The discharge plateau (about 1.5 V) and the charge plateau (about 1.6 V) were very …

Go to article

The Effect Of Cerium On The Anodic Behavior Of Pb-Ca-Sn Alloy In Sulfuric Acid Solution, Hou-Tian Liu, Jiong Yang, Hai-He Liang, Ji-Hua Zhuang, Wei-Fang Zhou Aug 2000

The Effect Of Cerium On The Anodic Behavior Of Pb-Ca-Sn Alloy In Sulfuric Acid Solution, Hou-Tian Liu, Jiong Yang, Hai-He Liang, Ji-Hua Zhuang, Wei-Fang Zhou

Journal of Electrochemistry

The cyclic voltammograms for Pb - 0.5 at% Ca - 1.5 at% Sn and Pb - 0.5 at% Ca - 1.5 at% Sn containing a certain amount of cerium in 4.5 mol·dm-3 H2SO4 at 20℃ were measured between 0.6 V and 1.4 V(vs. Hg/Hg2SO4). The growth rate of the anodic Pb(Ⅱ) films formed on the mentioned alloy electrodes at 0.9 V in the same sulfuric acid medium was investigated using the Linear Sweep Voltammetry. The variation with electrode potential of the real part of the impedence (Z’) for the anodic Pb(Ⅱ) films …

Go to article

The Electro-Catalytic Oxidation Of Hcooh On Electrodeposited Pd Electrode, Quan Zhou, Cun-Zhong Zhang, Xiao-Lin Lu, Zhong-Da Wu Aug 2000

The Electro-Catalytic Oxidation Of Hcooh On Electrodeposited Pd Electrode, Quan Zhou, Cun-Zhong Zhang, Xiao-Lin Lu, Zhong-Da Wu

Journal of Electrochemistry

The coherent electroplates were prepared by electro depositing Pd on supporting materials glassy carbon. The surface morphology of the electrodes was examined by SEM. The electro oxidation of HCOOH in HClO4 solution was investigated by using cyclic voltammetry. The results show that the deposited conditions in the preparation of electrodes by electro depositing Pd affect the electrodes electro catalytic activity to the oxidation of HCOOH. The platinized Pd electrode on GC substrates using large current density is of higher catalytic activity to the oxidation of HCOOH than Pd electrode. The electro catalytic activity of PdO formed on the Pd …

Go to article

A Study On Stochastic Resonance For The Process Of Active-Passive Transition Of Iron In Sulfuric Acid, Hong-Bo Ding, Bao-Yun Xia, Chun-Sheng Yin, Zhong-Xiao Pan, Renato Seeber Aug 2000

A Study On Stochastic Resonance For The Process Of Active-Passive Transition Of Iron In Sulfuric Acid, Hong-Bo Ding, Bao-Yun Xia, Chun-Sheng Yin, Zhong-Xiao Pan, Renato Seeber

Journal of Electrochemistry

The bistable characteristics of the process of active passive transition of iron in sulfuric acid was described and the stochastic resonance phenomenon in the process was simulated.

Go to article

Synthesis Of Li1+XMn2O4 Cathode Material For Lithium-Ion Batteries With Solution Method, Pei-Song Liu, Sing-Quarn Liu, Qing Li, Zhao-Yong Chen, Bai-Lan Zhang, Zuo-Long Yu Aug 2000

Synthesis Of Li1+XMn2O4 Cathode Material For Lithium-Ion Batteries With Solution Method, Pei-Song Liu, Sing-Quarn Liu, Qing Li, Zhao-Yong Chen, Bai-Lan Zhang, Zuo-Long Yu

Journal of Electrochemistry

The cathode materials Li1+xMn2O4 were prepared with citric acid complexing and solution impregnating methods. Structure characterization and specific surface area test were performed by means of XRD, BET methods, the influences of calcination temperature, Li/Mn molar ratio and raw materials on the structure and electrochemical capacity of samples have beem examined. The results showed that the Li/Mn molar ratio and calcimation temperature were the key factors affecting the electrochemical capacity of cathode materias. The optimum conditions for synthesis of  Li1+xMn2O4 cathode material were 0≤x≤0.05 and calcined at 750°C. The initial …

Go to article

The Effect Of Anode Thickness In Sofcs With Anode Supported Ysz Film, Yi-Huang Zhang, Yi Jiang, Zi-Gui Lu, Yong-Lai Dong, Jing-Wang Yan Aug 2000

The Effect Of Anode Thickness In Sofcs With Anode Supported Ysz Film, Yi-Huang Zhang, Yi Jiang, Zi-Gui Lu, Yong-Lai Dong, Jing-Wang Yan

Journal of Electrochemistry

Solid oxide fuel cells with supported yttria stabilized zirconia electrolyte films on anode substrates of various thickness have been fabricated. The electrochemical performances of the SOFCs have been examined. The results showed that the cell performance was limited by the anodic overpotential, which is caused mainly by a concentration polarization when the anode substrate is thick. The anodic overpotential was reduced obviously as the thickness of anode substrate was decreased. As a result, the performance of the SOFC cell was improved. With a 0.5 mm anode substrate, a SOFC cell produced a power density about 0.19 W/cm2 at 800 …

Go to article

A New Method For The Preparation Of The Electrodes With Very Low Platinum Loading Used In Proton Exchange Membrane Fuel Cell, Zhi-Gang Shao, Bao-Lian Yi, Ming Han, Ya-Guang Qiao, Hao Liu, Jing-Rong Yu Aug 2000

A New Method For The Preparation Of The Electrodes With Very Low Platinum Loading Used In Proton Exchange Membrane Fuel Cell, Zhi-Gang Shao, Bao-Lian Yi, Ming Han, Ya-Guang Qiao, Hao Liu, Jing-Rong Yu

Journal of Electrochemistry

Research and development on low platinum loading electrode is very important in reducing the cost of proton exchange membrane fuel cell(PEMFC) stack. This paper has put forward a new method to prepare the electrode of PEMFC. The pore forming substances were used in this methd. The low platinum loading electrodes (0.02 mgPt⋅cm-2) have already been prepared with the method. Compared with the traditional method, the new method is simple, cheep, and easy to scale up. The superior composition of the electrodes is catalyst: pore forming substance: Nafion= 3:3:1. The performance of a single cell using this …

Go to article

Technical Investigaton Of Thin-Film Plasticizing Lithium Ion Battery, Xin-Ping Ai, Xin-Lin Hong, Quan-Feng Dong, Sheng-Xian Li, Han-Xi Yang May 2000

Technical Investigaton Of Thin-Film Plasticizing Lithium Ion Battery, Xin-Ping Ai, Xin-Lin Hong, Quan-Feng Dong, Sheng-Xian Li, Han-Xi Yang

Journal of Electrochemistry

A number of polymer materials as candidates of host matrix of plastic polymer electrolyte were examined and techniques for preparation of thin-film electrolyte were reported. The results showed that the polymer electrolyte prepared with P(VDF-HFP) copolymer as host matrix and DBP as plasticizer exhibit the satisfactory mechanical strength and ionic conductivity. In comprison with liquid electrolyte systems, thin-film lithium ion battery has almost similar charge-discharge capacity and cycleability. The manufacture methods and the technical factors in making plasticizing lithium ion battery were also described in details.

Go to article

The Studies On Nanosized Materials For Lithium Ion Batteries, Hong Li, Jing-Ze Li, Li-Hong Shi, Guang-Yan Zhu, Qing Chen, Wei Lu, Xue-Jie Huang, Li-Quan Chen May 2000

The Studies On Nanosized Materials For Lithium Ion Batteries, Hong Li, Jing-Ze Li, Li-Hong Shi, Guang-Yan Zhu, Qing Chen, Wei Lu, Xue-Jie Huang, Li-Quan Chen

Journal of Electrochemistry

Our recent works about nanosized materials for lithium ion batteries are reported, including the synthesis of nanosized Sb, SnSb, CuSnx, Si and CuS, their electrochemical performance as anode or cathode active materials, the variation of crystal structure and morphology during discharge and charge cycling. In addition, the self-plasticization of lithium salt with nanosized anion ion in polymer electrolyte, the influence of the electrochemical Li-doping on the Raman spectra and photoluminescence of nano-Si are also introduced. Furthermore, the relationship between intrinsic properties of nanosized materials and their electrochemical behaviors are discussed. The prospect of nanosized materials for lithium ion …

Go to article

Powder Microelectrode Modified With Nafion-Os(Bpy)3Â 2+ And Pvp Composite And Its Catalysis For No2- Reduction, Pei-Fang Liu, Jia-Wei Yan May 2000

Powder Microelectrode Modified With Nafion-Os(Bpy)3Â 2+ And Pvp Composite And Its Catalysis For No2- Reduction, Pei-Fang Liu, Jia-Wei Yan

Journal of Electrochemistry

The modified powder microelectrode was prepared by etching a Pt (0.1 mm diameter) disk microelectrode and filling in thus formed cavity with Nation-Os(bpy)32+/PVP composite modified carbon powder. The composite modified powder microelectrode showed cyclic voltammetric behaviors changing with the mole ratio (denoted X) of SO3- to Os(bpy)32+ in Nafion. When X=3, a single pair of current peaks appeared near 0.6V (vs. SCE) due to Os(bpy)32+/3+ redox couple. In contrast, for X=20, a pair of additional current peaks occurred near 0.4V. Both X=3 and X=20 modified powder microelectrodes strongly catalyzed the first …

Go to article

Study On Carbon From Pyrolyzing Phenol-Formaldehyde Resin For The Negative Electrode Of Li-Ion Secondary Battery, Zhi-Yuan Tang, Xin-Guo Zhuang, Yu-Mei Zhai, Jian-Gang Li, Jian-Jun Xue, Chun-Yan Liu May 2000

Study On Carbon From Pyrolyzing Phenol-Formaldehyde Resin For The Negative Electrode Of Li-Ion Secondary Battery, Zhi-Yuan Tang, Xin-Guo Zhuang, Yu-Mei Zhai, Jian-Gang Li, Jian-Jun Xue, Chun-Yan Liu

Journal of Electrochemistry

Li-ion secondary batteries negative electrodes were prepared by low temperature (<1 000 ℃) pyrolysis of commercial phenol-formaldhyde resin. A thermogravimetric analysis (TGA) and an X-ray diffraction (XRD) studies were peoformed for the pyrolytic carbonaceous materials. The results indicated that these samples are amorphous polyacenic structure materials. With increasing pyrolytic temperature, these materials become structurally order, and the first charge-discharge special capacities reduce. The specific capacities base on pyrolytic temperature, involving lithium storage nanometer cavities.

Go to article

Template Synthesis And Uv-Vis Absorption Spectra Of The Nanowire Arrays Of Cadmium Chalcogenides, Shi-Min Xu, Kuan-Hong Xue, Jing-Lin Kong, Dong-Mei Sun, Yu-Ying Feng, Hai-Yan Lu, Guang-Hou Wang May 2000

Template Synthesis And Uv-Vis Absorption Spectra Of The Nanowire Arrays Of Cadmium Chalcogenides, Shi-Min Xu, Kuan-Hong Xue, Jing-Lin Kong, Dong-Mei Sun, Yu-Ying Feng, Hai-Yan Lu, Guang-Hou Wang

Journal of Electrochemistry

The porous alumina membrane formed in the anodic oxidation of highly pure aluminum foil has attracted a great deal of attention in recent years. It can be served as a desired template to prepare nanometer scale materials due to its unique structure of discrete and cylindrical nanopores, paralleled one another, with the homogeneous size and distribution. Chalcogenide semiconductors have promising prospect in the applications of photovoltaic and photoconducting devices and have been extensively exploited for many years. Olbright and his co-workers studied experimentally and theoretically the optical nonlinearties of CdSxSe1-x-doped glass; Britt and Ferekides reported that …

Go to article

Effects Of Temperature On The Proton Diffusion Of Doped Ni(Oh)2, Jian-Hua Liu, Jing-Wu Yang, Zhi-Yuan Tang May 2000

Effects Of Temperature On The Proton Diffusion Of Doped Ni(Oh)2, Jian-Hua Liu, Jing-Wu Yang, Zhi-Yuan Tang

Journal of Electrochemistry

The Chronoamperometry of powder spherical Ni(OH)2 microelectrode was used to study the proton diffusion coefficients of Ni(OH)2. The proton diffusion coeefficients and the apparent diffusion active energy in anode and cathode processes at different temperature were obtained. Compared with pure Ni(OH)2, the apparent diffusion active energy (Ea) of Ni(OH)2 doped with Co and Co + Zn was decreased and the diffusion constant (Do) was increased in the anode and the cathode processes, respectively, the effect of Co was greater. In contrast, for Ni(OH)2 doped with Zn, its Ea …

Go to article

Study On The Effect Of Sodium Ion On Cycle Performance Of Lithium/Improved Graphite Lithium Ion Cell, Wen-Huang Huang, Yu-Shun Yan, Chun-Rong Wan, Chang-Yin Jiang May 2000

Study On The Effect Of Sodium Ion On Cycle Performance Of Lithium/Improved Graphite Lithium Ion Cell, Wen-Huang Huang, Yu-Shun Yan, Chun-Rong Wan, Chang-Yin Jiang

Journal of Electrochemistry

The different concentration of Na+ was introduced into the non-aqueous eletrolyte system EC/DEC/LiClO 4 with 4A molecular sieve and lithiated 4A molecular sieve, by which the trace amount of water was removed. The concentrations of Na+ and Li+ were determined by atomic adsorption spectrometry. The cycle performance of lithium/improved graphite cells was then examined by charging and discharging under the constant electric current. The results demonstrated that the cycle performance of the cells was destroyed by the high concentration of Na+ under the small electric current. With the increase of electric current the cell became less …

Go to article

Electro-Oxidation Of Glyoxal To Glyoxalic Acid, Yin-Sheng Chen, Xin-Sheng Zhang, Jun Hu, Ying-Chun Dai Feb 2000

Electro-Oxidation Of Glyoxal To Glyoxalic Acid, Yin-Sheng Chen, Xin-Sheng Zhang, Jun Hu, Ying-Chun Dai

Journal of Electrochemistry

An investigation has been made to obtain the glyoxalic acid by the electrochemical oxidation of glyoxal solution with hydrochloric acid under various experimental conditions.The cell used consists of a lead cathode, a DSA anode and a cation-exchange membrane of model CM001. The current efficiency and yield for glyoxalic acid generation were 80.0% and 91.1% respectively, under optimal operating conditions: velocity of electrolyte flow 1.4 m·s-1 ,current density 450 A·m-2, temperature 30～40 ℃, initial concentration of glyoxal and hydrochloric acid 9.1%～16.0%, 4%～6%, respectively.

Go to article

Studies On Electrochemical Synthesis Of 4,5-Disubstituted-1,2- Benzoquinones And The Reaction Mechanism, Xian-Zhang Bu, Gui-Wu Xiao, Lin Ma, Xing-Chum He, Ling-Quan Gu Feb 2000

Studies On Electrochemical Synthesis Of 4,5-Disubstituted-1,2- Benzoquinones And The Reaction Mechanism, Xian-Zhang Bu, Gui-Wu Xiao, Lin Ma, Xing-Chum He, Ling-Quan Gu

Journal of Electrochemistry

The oxidation peak potentials (Ep) of alinine derivates and catechol in 0.1 mol/L KCl+15% alcohol solution were measured by cyclic voltammograms technique. The electrochemical oxidation condition was set according to the Ep. Three derivates of 4,5-disubstituted -1,2-benzoquinones were prepared via electrochemical oxidation-Michael addition reaction. The possible mechanism of electrochemical oxidation-Michael addition reaction is presented.

Go to article

Investigations Of Lithium Ion Battery Electrolyte Solution, Jing-Li Han, Qing-Guo Liu Feb 2000

Investigations Of Lithium Ion Battery Electrolyte Solution, Jing-Li Han, Qing-Guo Liu

Journal of Electrochemistry

Synthesis and electrochemical investigations of {LiB[(SO3)C6H3(O)(COO)]OC6H5} in EC/DMC or DMSO/PC mixtures are presented.

Go to article

Electrochemical Characterization Of Ir-Ta-Ti Metal Oxide Coated Titanium Anodes, Ting-Yong Wang, Li-Kun Xu, Guang-Zhang Chen Feb 2000

Electrochemical Characterization Of Ir-Ta-Ti Metal Oxide Coated Titanium Anodes, Ting-Yong Wang, Li-Kun Xu, Guang-Zhang Chen

Journal of Electrochemistry

Ir-Ta-Ti metal oxide coated titanium anodes of variable composition were prepared by thermal decomposition. Their micro morphorogies and electrochemical properties were characterized by scanning electron microscope, open circuit potential, cyclic voltammetry, consumption rate measurements and accelerated life test. The SEM results indicated that all coatings were of a porous and cracked-mud microstructure influenced greatly by the composition of coatings. The electrochemical measurements showed that the Ir-Ta-Ti ternary oxide-coated anodes exhibited excellent electrochemical activity and electrochemical stability in both acidic media and seawater which were affected by the composition and microstructure of the coatings. Owing to good corrosion resistance and low …

Go to article

The Study On Fabricating Thin Electrodes For Polymer Electrolyte Membrane Fuel Cells (Pemfc), Yong-Sheng Yang, Jing-Hua Liu, Chang-Peng Liu, Gong-Quan Sun, Chang-Zhi Li, Tian-Hong Lu Feb 2000

The Study On Fabricating Thin Electrodes For Polymer Electrolyte Membrane Fuel Cells (Pemfc), Yong-Sheng Yang, Jing-Hua Liu, Chang-Peng Liu, Gong-Quan Sun, Chang-Zhi Li, Tian-Hong Lu

Journal of Electrochemistry

To lower platinum loading in electrodes for polymer electrolyte membrane fuel cell, a new thin electrode fabrication technique (TEFT) was developed in this work. A series of low Pt loading electrodes with smooth and uniformed surface were fabricated by the TEFT. As a result, the maximum power density of the cell with platinum loading of 1 mg/cm2 and Nafion 117 membrane as electrolyte was up to 0.3 W.cm-2. Moreover, the effects of PTFE and Nafion content in cathodes on the performance of PEMFC with low Pt loading electrodes (1 mg Pt/cm2) were examined systematically.

Go to article

Sprayed And Thermally Evaporated Carbon Films As Anodes For Lithium Ion Batteries, Shu-Gao Zhang, M.Schleich Donald Feb 2000

Sprayed And Thermally Evaporated Carbon Films As Anodes For Lithium Ion Batteries, Shu-Gao Zhang, M.Schleich Donald

Journal of Electrochemistry

Carbon films were made using spray-thermal evaporation from a kind of pyrolytic carbon powder. The films obtained with graphite structure were both potentio-statically and galvanostaically tested. Cycling patterns indicated a reduction peak on the first cycle corresponding to the formation of solid electrolyte interface, and the capacity values and x values were quite acceptable compared to theoretical ones when charging-discharging current density was suitable. Based on the experimental results, the obtained carbon films could be used as anode materials for relatively determining the electrochemical performances of cathode materials.

Go to article

Studies Of The Preparation Of Electrodes From Lead Carbonate For Lead-Acid Battery Ⅱ. The Preparation Of Paste Electrodes, Zhong-Xu Dai, Di-Hua Wang, Hao-Hao Ke, Jin-Yun Zou, Yun-Hong Zhou Feb 2000

Studies Of The Preparation Of Electrodes From Lead Carbonate For Lead-Acid Battery Ⅱ. The Preparation Of Paste Electrodes, Zhong-Xu Dai, Di-Hua Wang, Hao-Hao Ke, Jin-Yun Zou, Yun-Hong Zhou

Journal of Electrochemistry

The positive and negative pastes were prepared by mixing PbCO3 and H2SO4 solution as well as relative additives, respectively. The effects of the various formation methods and the charge/discharge conditions on discharge capacity and active material utilization of both electrodes were examined. The results indicate that the performance of the positive electrode formed at 2.0 mA/cm2 is better than that formed at higher current density under the same charge/discharge condition, the PAM utilization reaches 74.4 % under discharging at 2.0 mA/cm2; and the property of the negative electrode formed by unsymmetrical square wave …

Go to article

Effect Of Different Species Of Cobalt Additive On Performance Of Nickel Hydroxide Electrode, Xian-Xia Yuan, Yin-Dong Wang, Feng Zhan Feb 2000

Effect Of Different Species Of Cobalt Additive On Performance Of Nickel Hydroxide Electrode, Xian-Xia Yuan, Yin-Dong Wang, Feng Zhan

Journal of Electrochemistry

Performances of nickel electrodes when adding or without adding Cobalt in different forms were studied, the results were interpreted by cyclic voltammetry(CV) and electrochemical impedance spectroscope (EIS). It was demonstrated that the additions of Co, CoO, CoO+Co by mechanically mixing with Ni(OH)2 all can improve the performance of nickel electrode to some extent, and when Co is added in the form of CoO the best performance can be obtained. This can be mainly attributed to the fact that three kinds of Co additives all improved the structure of nickel hydroxide and the ability of H+ in electrolyte transporting …

Go to article

Fabrication And Examination Of Reduced Temperatrue Solid Oxide Fuel Cell Using A Supported Thin Ysz Electrolyte Substrate, Yi-Huang Zhang, Yong-Lei Dong, Yi Jiang, Zhi-Gui Lu, Jing-Wang Yan Feb 2000

Fabrication And Examination Of Reduced Temperatrue Solid Oxide Fuel Cell Using A Supported Thin Ysz Electrolyte Substrate, Yi-Huang Zhang, Yong-Lei Dong, Yi Jiang, Zhi-Gui Lu, Jing-Wang Yan

Journal of Electrochemistry

By using a cost-effective wet process,dense yttria stabilized zirconia (YSZ) films on Ni-YSZ anode substrates have been prepared successfully. The YSZ film was characterized to be around 10 μm in thickness, sufficiently dense, uniform and crack free. A single solid oxide fuel cell fabricated from the supported YSZ film electrolyte on the anode substrate and a LSM cathode prepared on the YSZ film was tested. The power density reached to 0.1 W/cm2 at 800 ℃, showing a reasonable performance. Further analysis on both electrodes shows that the anodic overpotential was much larger than IR drop (including YSZ resistance and …

Go to article

Cathodic Indirect Electro-Oxidation——Organic Electro-Synthesis Dimethyl Sulfone, Deng-Ping Gu, Rui-Zhi Wang, Hong-Kun Zhang, Xue-Ying Zhang, Wei Li, Bao-Qiu Cui Feb 2000

Cathodic Indirect Electro-Oxidation——Organic Electro-Synthesis Dimethyl Sulfone, Deng-Ping Gu, Rui-Zhi Wang, Hong-Kun Zhang, Xue-Ying Zhang, Wei Li, Bao-Qiu Cui

Journal of Electrochemistry

A cathodic indirect electro-oxidation system was established for indirect electro-oxidize dimethyl sulfoxide to dimethyl sulfone with electro-eduction generated H2O2 catalyzed by the pertungstate/tungstate (WO52-/WO42-) redox mediator. Influences of current density, pH, temperature, and the current efficiencies etc. On the cathodic indirect electro-oxidation of dimethyl sulfone were investigated for determining optimum reaction conditions. The current efficiency reached more than 70%. Mother-liquid could be recycled to use without pollution.

Go to article

First Prev Next Last