Materials Science and Engineering Commons^™

Influence Of Saturation Nonequilibrium And Variable Operation Conditions On The Electromechanical Performance Of Ionic Polymer Metal Composite Actuator Architectures, Allison Maria Arnold

Graduate Theses, Dissertations, and Problem Reports (ETD)

Electroactive polymers (EAPs) continue to gain attention for their potential to offer unique and versatile solutions in the soft robotic and flexible electronic industries. Ionic Polymer-Metal Composites (IPMCs) are a class of ionic-type EAPs which can be configured as capacitor actuators with very low voltage requirements (≤ 5 V AC or DC). Their compact, portable, and lightweight properties, coupled with a biomimetic bending actuation response make them ideal for human-machine integrated technologies such as medical implants, active skins, and artificial muscles. The Nafion-based IPMC can be described as a layered composite capacitor containing an ionic polymer core, sandwiched between chemically …

Microscale Contact And Friction Of Low Modulus, Lightly Crosslinked Polydimethylsiloxane, Justin Glover

Theses and Dissertations--Chemical and Materials Engineering

Friction and adhesion of soft materials are important for pressure sensitive adhesives, biomaterials, and soft robotics; however, the behavior on the microscale is not fully understood. When two objects come into contact, their interactions are usually mediated by small contact points due to surface roughness. At the microscale size, surface forces can deform soft materials to minimize energy by increasing the contact area, which is balanced by the elastic deformation of the polymer network. However, for soft, crosslinked materials with a modulus below ~100 kPa, it is challenging to predict the behavior with prior contact and friction models. Additionally, lightly …

Molecular Modeling Of High-Performance Polymers, Sagar Umesh Patil

Dissertations, Master's Theses and Master's Reports

High-performance polymers are extensively used in the aerospace and aeronautics industries due to their low density, high specific strength, and high specific stiffness. These properties along with better infiltration with reinforcements [carbon nanotubes (CNTs), glass, etc.] capability make them an excellent candidate to fabricate Polymer Matrix Composites (PMCs) tailored for specific applications. The applications range from products used daily to deep space exploration. These materials are subjected to varying temperatures and pressures during fabrication and in service. Therefore, the evolution of their intrinsic properties needs to be studied and their ability to sustain extreme environmental conditions in outer space needs …

Precision Machining Of Polymer Matrix Composites, Victor Martinez Polanco

All Graduate Theses, Dissertations, and Other Capstone Projects

This experiment was started to figure how the precision machining of polymer matrix composites differ from metals such as aluminum and steel. Polymer matrix composites are highly used in powered vehicles for their strength and light weight properties, but they are typically not machined to their final product how metals are. Polymer matrix composites are typically manufactured near their final shape, with some trimming involved to complete its shape. This research machined carbon fiber manufactured through a wet layup and through resin infusion, as well as aluminum and steel to compare their machineability and their surface finish. These materials were …

Modeling, Fabrication, And Characterization Of Rf-Based Passive Wireless Sensors Composed Of Refractory Semiconducting Ceramics For High Temperature Applications, Kavin Sivaneri Varadharajan Idhaiam

Graduate Theses, Dissertations, and Problem Reports (ETD)

Real-time health monitoring of high temperature systems (>500^oC) in harsh environments is necessary to prevent catastrophic events caused by structural failures, varying pressure, and chemical reactions. Conventional solid-state temperature sensors such as resistance temperature detectors (RTDs) and thermocouples are restricted by their operating environments, sensor dimensions and often require external power sources for their operation. The current work presents the research and development of RF-based passive wireless sensing technology targeting high temperatures and harsh environmental conditions. Passive wireless devices are generally classified as near-field and far-field devices based on the interrogation distance. Near-field sensors are placed at …

Combinatorial Approaches For Effective Design, Synthesis, And Optimization Of Enzyme-Based Conjugates, Jordan Scott Chapman

Graduate Theses, Dissertations, and Problem Reports (ETD)

The specificity and efficiency with which enzymes catalyze selective chemical reactions far exceeds the performance of traditional heterogeneous catalysts that are predominant in industrial applications such as conversion of commodity chemicals to value-added products, fuel cells, and petroleum refinement. Moreover, biocatalysts exhibit exceptionally high product turnover at ambient conditions with little health and environmental burden. These advantageous qualities have led to the prolific use of enzyme catalysis in pharmaceutical, detergents, and food preservation industries wherein their use has greatly reduced waste generation, Unfortunately, the full slate of benefits that enzymes can impart to a broader range of chemical processes is …

Rheological Properties Of Recyclable Polymer Matrices For Advanced Composite Applications, Rahul Shankar

Dissertations

This dissertation focuses on evaluating the rheological characteristics of a variety of recyclable polymer matrices, which can compete with thermosets in a wide range of specialized applications. Studying the fundamental solid and melt-state viscoelastic properties and establishing structure-property-processing relationships is critical for the widespread adoption of these novel recyclable polymers in commercial applications. The first chapter provides an introductory overview of the different recyclable polymer matrices and their applications including high performance thermoplastics as thermoset replacements in high energy composite manufacture, multifunctional specialty thermoplastics for additive manufacturing and next generation, reprocessable covalent adaptable networks for self-healing applications. Furthermore, the important …

Understanding Process-Structure-Property-Performance Relationships Of Thermoplastic Olefins (Tpo) Foams Through A Novel Manufacturing To Response Pathway, Sai Aditya Pradeep

All Dissertations

The global transportation industry is the second highest contributor to climate change. As a result, there has been a concerted effort to spearhead research in economical lightweighting technologies, as every 10 % reduction in weight will lead to to 6 – 8 % improvement in fuel efficiency. Additionally, the recent push for electrification and the emphasis on Corporate Average Fuel Economy (CAFE) standards have seen original equipment manufacturers (OEM’s) dive into lightweighting of materials to improve overall range and/or fuel-efficiency. Thermoplastic Olefins (TPOs) have in recent years carved out a niche in the automotive industry due to advantages such as …

Silver Microparticle And Submicron Wire - Polylactic Acid Composites For Additive Manufacturing, Jenna W. Robichaux

LSU New Orleans Theses and Dissertations

This thesis explores the incorporation of silver microparticle and submicron wire additives into thermoplastic filament feedstock for fused filament fabrication (FFF) to create multifunctional three-dimensional (3D) printable composites. The impact of silver microparticle and submicron wire additives on mechanical behavior along with antibacterial effect of the silver microparticle and submicron wire additives on printed objects were assessed.

Composite FFF filaments were fabricated by solution processing, granulation, and extrusion. Differential Scanning Calorimetry (DSC) was conducted to measure the glass transition and melting point temperatures of the composite filaments for 3D printing. The effect of the additive addition on the thermal properties …

Automated Mini-Tubular Ceramic Production, Hunter Brooks, Daniel Freeman, Leo Taranta-Slack

Mechanical Engineering

Researchers at Lawrence Livermore National Laboratory need a way to increase the rate of manufacturing of mini-tubular ceramics to be used in testing particulate air filters. This document outlines our process from researching and writing an initial scope of work all the way to fabricating and testing a final prototype. This journey takes us through the background research, ideation process and selection of a final design. We also detail the desired engineering specifications and our concept selection process. We dedicate a significant portion of this report to discussion of our final design. We delve into how it was manufactured as …

Investigation Of Optical And Structural Properties Of Gesn Heterostructures, Oluwatobi Gabriel Olorunsola

Graduate Theses and Dissertations

Silicon (Si)-based optoelectronics have gained traction due to its primed versatility at developing light-based technologies. Si, however, features indirect bandgap characteristics and suffers relegated optical properties compared to its III-V counterparts. III-Vs have also been hybridized to Si platforms but the resulting technologies are expensive and incompatible with standard complementary-metal-oxide-semiconductor processes. Germanium (Ge), on the other hand, have been engineered to behave like direct bandgap material through tensile strain interventions but are well short of attaining extensive wavelength coverage. To create a competitive material that evades these challenges, transitional amounts of Sn can be incorporated into Ge matrix to form …

An Investigation Into Energy-Material Properties Interaction In Additive Manufacturing Of Polymers., Pu Han

Electronic Theses and Dissertations

Additive manufacturing (AM), known as three-dimensional (3D) printing, is a fabrication process to build 3D objects layer by layer based on computer aided design (CAD) model or digital 3D model. Fused filament fabrication (FFF) has become a preferred method for additive manufacturing due to its cost-effectiveness and flexibility. However, the parts built using FFF process suffer from lower mechanical strength compared to that fabricated using traditional method and rough surface finish. With this motivation, this dissertation aims to develop and implement a novel in-process laser assisted technique on FFF to heal the microstructure of FFF built objects by enhancing reptation …

Synthesis Of Polyethylene Glycol-Based Hydrogels And Silver/Gold Nanostructures For Biomedical Applications, Isabelle Ishimwe Niyonshuti

Graduate Theses and Dissertations

This work focuses on the synthesis of biocompatible polyethylene glycol (PEG)-based hydrogels, silver nanoparticles (AgNPs), and silver-gold nanocages (Ag-AuNCs) for biomedical applications. The dissertation includes two parts with Part I on the work of PEG-based hydrogel for wound healing applications and Part II on the work of Ag/Au nanostructures for antimicrobial applications. Part I studies PEG-based hydrogel for the delivery of fibroblast growth factors (FGFs) for wound healing applications, aiming to overcome the challenge of designing hydrogels capable of the sustained release of bioactive FGFs. This research develops new biocompatible anionic injectable hydrogel formulations based on Poly (Oligo Ethylene Glycol …

Explorations And Developments In Multifunctionality, 3d Printing, And Accelerated Aging For Thermoplastics And Thermosets, Zachary Brounstein

Nanoscience and Microsystems ETDs

If the world is to progress through the fourth industrial revolution, rapid advances in materials science must complement new technological feats in manufacturing, computation and device functionality, and a broader understanding of how materials behave as they age and degrade. To this effect, much effort has been directed towards polymeric materials to address and solve many problems in this new era. This includes developing polymer composites that incorporate fillers to imbue multifunctionality, fabricating novel formulations for additive manufacturing, and conducting aging studies to assess the performance of these materials over long time spans. Building and expanding on the latest research …

Optimization In The Application Of Varnishes Barrier On Cartonboard Packaging, Andre Ramalheiro De Andrade, Maria Isabel Rodrigues Phd, Eduardo Luiz Machado Phd

Journal of Applied Packaging Research

In this work adjustments in the rotogravure printing process are proposed to the varnish water vapor transmission rate (WVTR) aiming to obtain results smaller than 20g/m²/24h. One case study was used for the propositions for improvements, where focused on varnish application process in a gravure printer for an eight-printing unit cartonboard packaging, maximum printing speed of 175 m/min and a 285 g/m² weight cartonboard. The possible variables that influenced the WVTR result were selected from the technical expertise of the people involved in the project, the analysis in the printing process with the application of directed trials using experimental designs …

Chitosan Graphene Composite Fabrication And Characterization For Treatment Of Harmful Algal Blooms And Toxins, Sarah Zetterholm

Master's Theses

Chitosan graphene composites were fabricated and characterized as a management strategy for harmful algal blooms (HABs) caused by various species of cyanobacteria. These chitosan graphene materials were compared to previously studied chitosan graphene-oxide composites in both material properties and HAB treatment. In previous studies, adsorption of the cyanobacteria onto the surface of the composite materials has been observed. Investigations of the pure materials for these composites are also included in this study to determine whether removal is a result of charge interactions with the composite, or as an inherent property of the graphene or graphene oxide. Initial results suggest that …

Development Of The Composition Of A Composite Material Based On Thermoreactive Binder Ed-20, Umida Ziyamukhamedova, Gavhar Miradullayeva, Erkin Rakhmatov, Jasur Nafasov, Mavtuna Inogamova

CHEMISTRY AND CHEMICAL ENGINEERING

The aim of the study is to determine the effect of the type of structural modifier and filler on the structure formation and technological properties of potting composite polymeric materials (HCPM) and protective coatings for sheet and complex-configuration technological equipment, taking into account their rheological properties. Compositions of composite polymer materials based on a thermosetting binder of epoxy-diane resin ED-20 filled with a mineral filler - kaolin modified with gassipol resin (GS) - were developed using Newton's interpolation formula and the Lagrange method. The optimal amount of gossypol resin determined in the composition of the composite – in the amount …

Effect Of Talc On The Properties Of A Compound Based On Ethylene-Propylene Copolymer, Ikromjon Usmanov, Farrukh Kurbanbekov, Bobir Aykhodjaev, Ravshan Adilov

CHEMISTRY AND CHEMICAL ENGINEERING

The aim of the research is to study the possibility of replacing Korean-made talc with inexpensive talc from an Afghan deposit, processed in Uzbekistan and used for the production of polypropylene compounds. In the future, these compounds are used for the manufacture of plastic car parts. A block copolymer produced by Uz Kor Gaz Chemical was chosen as a binder. For this, the influence of the content and type of talc on the properties of a compound based on an ethylene-propylene copolymer was studied.

The properties of the obtained compounds checked using ISO standards. The fractional composition of the studied …

Poly(2-Hydroxyethyl Methacrylate) Hydrogels For Contact Lens Applications–A Review, Kushendarsyah Saptaji, Nurlaely Rohmatul Iza, Sinta Widianingrum, Vania Katherine Mulia, Iwan Setiawan

Makara Journal of Science

The emerging technology in biomedical engineering requires biocompatible materials, which are also referred to as biomaterials. For a material to be considered biocompatible, it should not interact with human tissues in a harmful way, and vice versa. Various properties of biocompatible materials, such as mechanical and optical properties, have to be considered for different biomedical applications. One of the most popular applications of biomaterials is for contact lenses. Hydrogels, specifically poly(2-hydroxyethyl methacrylate) (PHEMA) hydrogels, are among the most popular ones in ophthalmologic applications, especially in soft contact lenses. This paper reviews the use of PHEMA hydrogels as one of the …

Biodegradable Nanocomposite Multifunctional Packaging Film For Fruits, Kalpani Y. Perera, Shubham Sharma, Dileswar Pradhan, Amit Jaiswal, Swarna Jaiswal

Articles

Biopolymers have been used in food packaging in recent years due to high pollution rates and decreased biodegradation of synthetic polymers. Chitosan (CH) and Sodium alginate (SA) are both biodegradable biopolymers with excellent film forming capability. TiO2 nanoparticles have high mechanical strength, degradation ability and antimicrobial properties, which are beneficial in food packaging. The aim of the current work is to develop the biodegradable multifunctional nanocomposite film for fruit (i.e., Pear) packaging applications. Bionanocomposite film was prepared by solvent casting method using CH-SA and various concentrations of TiO2. The multifunctional properties such as UV barrier, thermal, water retention, mechanical, chemical, …

Seaweed Polysaccharide In Food Contact Materials (Active Packaging, Intelligent Packaging, Edible Films, And Coatings), Kalpani Y. Perera, Shubham Sharma, Amit K. Jaiswal, Swarna Jaiswal

Articles

Food contact materials (FCMs) are materials that come in contact with food products such as food packaging which play a significant role in the food quality and safety. Plastic, which is a major food packaging material, harms the eco-system, wildlife, and the environment. As a result, numerous researches have been in progress on alternative polymers, which has similar properties as plastic but is also environmentally friendly (biodegradable). In recent years, the utilization of seaweed polysaccharides has piqued interest due to its biodegradability, non-toxicity, antioxidant capabilities, and excellent film formation ability. However, it has a number of drawbacks such as low …

Tools And Strategies For The Patterning Of Bioactive Molecules And Macromolecules, Daniel J. Valles

Dissertations, Theses, and Capstone Projects

Hypersurface Photolithography (HP) is a printing method for fabricating structures and patterns composed of soft materials bound to solid surfaces and with ~1 micrometer resolution in the x, y, and z dimensions. This platform leverages benign, low intensity light to perform photochemical surface reactions with spatial and temporal control of irradiation, and, as a result, is particularly useful for patterning delicate organic and biological material. In particular, surface- initiated controlled radical polymerizations can be leveraged to create arbitrary polymer and block- copolymer brush patterns. Chapter 1 will review the advances in instrumentation architectures from our group that have made these …

Evaluation Of Stretch Film Behavior During Long-Term Storage Under Different Atmospheric Conditions, Kyle Dunno, Maria Symanski

Journal of Applied Packaging Research

This study examined the post-application behavior of two 20.3 micron machine stretch films, one categorized as high-performance and one as general-performance, for thirty days while stored at either 23°C or 38°C. For each film type, the stretch film was applied to a simulated unit load to produce neutral and positive applied total stretch scenarios. The relaxation curves developed from each test indicate the relaxation rate of the films varied based on the storage condition. Observed was an average of 41% containment loss for both high-performance and general-purpose films when the simulated loads were stored at 38°C. For simulated loads stored …

Rapid Annealing Of Perovskite Solar Cell Thin Film Materials Through Intense Pulse Light., Amir Hossein Ghahremani

Electronic Theses and Dissertations

Perovskite solar cells (PSCs) have garnered a great attention due to their rapid efficiency improvement using cheap and solution processable materials that can be adapted for scalable high-speed automated manufacturing. Thin film perovskite photovoltaics (PVs) are typically fabricated in an inert environment, such as nitrogen glovebox, through a set of deposition and annealing steps, each playing a significant role on the power conversion efficiency (PCE), reproducibility, and stability of devices. However, atmospheric processing of PSCs would achieve lucrative commercialization. Therefore, it is necessary to utilize materials and methods that enable successful fabrication of efficient PSCs in the ambient environment. The …

Degumming Of Hemp Fibers Using Combined Microwave Energy And Deep Eutectic Solvent, Bulbul Ahmed

LSU Master's Theses

Hemp is considered as one of the sustainable agricultural fiber materials. Degumming or surface modification of hemp bast is needed to produce single fibers for ensuing textile and industrial applications. The traditional degumming process necessitates a high amount of alkali, which causes detrimental environmental pollution. This study offers a new method to degum hemp fibers with reduced use of harmful alkali and precious water resources. In this work, hemp bast fibers were degummed by using combined microwave energy and deep eutectic solvent (DES). The properties of hemp fibers manufactured by this method were investigated and compared with the traditional alkali …

Tribological Studies Of Thick Polytetrafluoroethylene Coatings Enhanced By Polydopamine And Nanoparticles, Sujan Kumar Ghosh

Graduate Theses and Dissertations

Polytetrafluoroethylene (PTFE) is a popular low friction solid lubricant with high chemical and thermal stability. Thick PTFE coatings have the potential for many tribological applications, such as replacing Tin-based Babbitt materials in journal bearings. However, the weak bonding strength to the substrate and the high wear rate of PTFE coatings are current limiting factors. The lack of understanding of their tribological properties and wear mechanisms in oil-lubricated conditions and how coating thickness affects the tribological performance further hindered the use of PTFE coatings. In this dissertation, polydopamine (PDA), a bio-inspired adhesive, is used as an underlayer for or as a …

Phase-Field Modeling Of The Polymer Membrane Formation Process For Micro- And Ultra-Filtration, Michael Rosario Cervellere

Graduate Theses and Dissertations

Porous polymer membrane filters are widely used in separation and filtration process. Micro- and ultra-filtration membranes are commonly used in biopharmaceutical applications such as filtering viruses and separating proteins from a carrier solution. The formation of these membrane filters via phase inversion is a complex and interconnected process where varying casting conditions can have a wide variety of effects on the final membrane morphol- ogy. Tailoring membrane filters for specific performance characteristics is a tedious and time consuming process. The time and length scales of membrane formation make it extremely difficult to experimentally observe membrane formation. Modeling the membrane formation …

Investigation Of Membrane Based Processes For Biomedical Applications, Efecan Pakkaner

Graduate Theses and Dissertations

As substantial developments were achieved in nanotechnology and polymer engineering, especially in the last few decades, the use of membranes and membrane-based procedures was found to be expanding into more and more research and development areas; including biological engineering, life sciences and biomedical engineering. Not only have they been the main focus of meaningful research, but they have also been the main pieces of the solutions to very thorny problems encountered within a wide range of applications from microfluidics to water treatment, thanks to their versatility, cost-effectiveness and biocompatibility, when compared to conventional separation techniques. To celebrate and embrace these …

Experimental Investigation Of The Performance Of A Hybrid Self-Healing System In Porous Asphalt Under Fatigue Loadings, Shi Xu, Liu Xueyan, Amir Tabakovic, Erik Schlangen

Articles

Self-healing asphalt, which is designed to achieve autonomic damage repair in asphalt pavement, offers a great life-extension prospect and therefore not only reduces pavement maintenance costs but also saves energy and reduces CO2 emissions. The combined asphalt self-healing system, incorporating both encapsulated rejuvenator and induction heating, can heal cracks with melted binder and aged binder rejuvenation, and the synergistic effect of the two technologies shows significant advantages in healing efficiency over the single self-healing method. This study explores the fatigue life extension prospect of the combined healing system in porous asphalt. To this aim, porous asphalt (PA) test specimens with …

Heated Assembly And Transfer Of Van Der Waals Heterostructures With Common Nail Polish, Kristine L. Haley, Jeffrey A. Cloninger, Kayla Cerminara, Randy M. Sterbentz, Takashi Taniguchi, Kenju Watanabe, Joshua O. Island

Physics & Astronomy Faculty Research

Recent advances in the manipulation and control of layered, two-dimensional materials has given way to the construction of heterostructures with new functionality and unprecedented electronic properties. In this study, we present a simple technique to assemble and transfer van der Waals heterostructures using common nail polish. Commercially available nail polish acts as a resilient sticky polymer, allowing for the fabrication of complex multi-material stacks without noticeable fatigue. Directly comparing four commercially available brands of nail polish, we find that one stands out in terms of stability and stacking characteristics. Using this method, we fabricate two top-gated devices and report their …