Materials Science and Engineering Commons^™

Research On Molten Carbnate Fuel Cell, Naichao Li, Baolian Yi, Lianying Kong, Enjun Zhang, Huaxin Lin, Tianxi Qu, Yingcai Cheng

Journal of Electrochemistry

Cold-roll-milling has been evaluated as a technique for preparing porous LiAlO₂ matrices for use as a molten carbonate fuel cell electrolyte matrix. This technique produces reliable electrolyte structures with the following characteristics and advantages: ease of handling, uniform thickness, using nontoxic inorganic solvents, controlled pore size distribution, and ability to be impregnated with the alkali carbonate without fracrure.

The Molren Carbnatod Fuel Cell (MCFC) was assembled from sintered Ni electrodes and LiAlO₂ electrolyte matrix, the electrode area is 28 cm², the effect of operating conditions on cell performance was tested, it was found that the cell …

The Inhibition Of Amphipathic S- And N-Containing Compounds On Carbon Steel Corrosion, Wei Xing, Yibin Shan, Du Guo, Tianhog Lu, Shiquan Xi

Journal of Electrochemistry

Ordered monolayers of S- and N-containing amphipathic corrosion inhibitors were depoitod onto the surfaces of carbon steel electrode with super-molecular assembly technique. The effect of molecular aggregation of monolayers on carbon steel corrosion in 0.05 mol·cm^-3 H₂SO₄ and the mechanisms of these inhibitors were discussed in details. It was found that the transport of hydrated hydrogen ion to the surface of steel depends strongly on the inhibitor molecular aggregation in the monolayers.

Development Of The High Capacity Sintered Type Nickel Positive Electrode, Guohua Yu, Shijie Zhang, Xiaolin Wang, Jingqi Wei

Journal of Electrochemistry

By improving the design and technologies of the sintered type nickel oxide positive electrode for the NiMH batteries, We do our best to increase the sinter volume and porosity,the amount of the active materals and their utilization, so we have fabricated the high capacity sintered typo nickel electrodes fitting for the NiMH battreies. The sfecitic capacity of the lot produced electrodes is up to 550 mA/cm^-3.

The Influence Of Cathode Ingredients In Zinc Chloride Type Battery On The Discharge Ability, Qi Shen, Biao Zhuang

Journal of Electrochemistry

The influence of cathodic powder ingredients in ZnCl₂ type heavy duty battery on the discharge ability has been studied, a suitable battery ingredients is founds.

Determination Of Transport Number Of The Modified Liclo4-(Peo)20 Polymer Electrolyte, Ruqi Zhou, Qngguo Liu, Weihua Qiu, Yun Zhang, Yuee Zhao, Leiling Yang

Journal of Electrochemistry

In this work a combination method of A.C. Impedance and chronoamperometry was used to determine the lithium ion transport number of LiClO₄·(PEO)₂₀·(PC)₁₂·(EC)₁₂ polymer electrolyte. It is known that lithium is thermodynamically unstable in non-aqueous or polymer electrolytes, leading to the formtion of a film on lithium surface, called as solid electrolyte interphase (SEI). The presence of SEI layer will greatly influence the experimental result of lithium ion transport number. The new method avoid the effect of SEI layer, and can give correct transport number of lithium ion in the electrolyte of DCIO_{4 …}

Preparation Techique Of Foamed Nickel By Electrodeposition, Xihua He, Ronghui Hu, Hanxi Yang, Zhengzhong Zuo

Journal of Electrochemistry

This paper describes the preparation technique and operation conditions for manufacturing foamed nickel by chemilcal pretreament, electrodeposition and heat treatment. The foamed nickel made in this method showed high porosity, uniformity and considerable strength and tenacity,applicable for various secondary battery electrodes.

The Electrochemical Behavior Of C60-Chemically Modified Poly(N-Vinylcarhzole)In 1 Mol/L Liclo4-Thf Solutions, Yu Chen, Zuen Huang, Ruifang Cai, Fupin Zhang

Journal of Electrochemistry

The electrochemical behavior of C₆₀-PNVC copolymer in 1 mol/L LiClO₄-THF solutions has been studied by cyclic voltammetry. The results demonstrated that there are considerable differences of electronic structure between PNVC (Poly (N-vinylcarbazole)) and C₆₀-PNVC copolymer, this being consistent with the ESR results and the oxidstion-reduction activarion of pure PNVC by C₆₀-chemical modification. In the potential region, 1.3V～-3.5V, five steps, 0. 90V/0.60V, 0.20V/0.00V, -1.05V/-1.30 V, -1.25V/-1.75 V, -2.00V/-2.50V, of oxidation/reduction proceases were indicated in the cyclic voltammetry for pure PNVC, whereas seven steps, 0.20V/0.20V, -0.30V/-0.50 V, -0. 60V/-0.60 V, -0.80V/-1.10 V, -1.95V/-2.10 V, …

Study On The Manufacture Of Pt/C Gas-Diffusion Electrodes, Yonglin Ma

Journal of Electrochemistry

The various methods of manufacturing gas-diffusion electrodes are reviewed and a new method of preparing the Pt/C electrocatalyst and the gas-diffusion electrodes is explored in this paper. The electrochemical performance of resulting electrodes in concentrated phosphoric acid for oxygen reduction at 150℃ are compared with the commercial electrode which purched from Giner Inc. (U. S. A). The results show that the performance of the Pt/C electrodes which manufactured by the method in this paper has been greatly improved. Therefor, a fuel cell using such electrodes has high industrial value.

Mechanical Alloying Of Nitrogen Into Iron Powders, J. Rawers, D. Govier, D. C. Cook

Physics Faculty Publications

Mechanical alloying of nitrogen into bcc-fe powder is a very effective and efficient means of obtaining very high concentration of nitrogen in micron-size iron particles. Mechanical alloying increases the concentration of nitrogen in the iron powder far in excess of the bcc-Fe lattice low nitrogen solubility, however most of the infused nitrogen resides on the nano-size grain boundaries and in nano-size bct-fe that forms during mechanical alloying.

Photoluminescence And Electroluminescence Of Erbium And Neodymium Implanted Semiconductors, James R. Hunter

Theses and Dissertations

Low temperature photoluminescence (PL) and electroluminescence (EL) measurements were used to study the excitation of erbium- and neodymium-implanted GaAs and Al_xGa_1-xAs (x=0. 1, 0.3) pn-junctions. The rare-earth (RE) emissions were investigated as a function of ion dose, aluminum mole fraction, laser excitation power, and applied forward bias voltage for the implanted samples. Low temperature PL was also measured from Er doped silicon grown by the metalorganic chemical vapor-phase deposition (MOCVD) method using various growth parameters.. The MOCVD-grown Si samples were studied as a function of metalorganic source temperature, silane (SiH₄) flow, growth time, and …

A Photoelectrochemical Investigation Of A.C.Modulated Passive Films On 304 Stainless Steel In Weak-Alkaline And Neutral Solution, Tianbao Du, Chunan Cao, Jiakang Yu, Haichao Lin

Journal of Electrochemistry

A photoelectrochemical investigation has been carried out on AISI 304 stainless steeI AV modulated passive film in 0.1mol/L Na₂B₄O₇ and 0.5 mol/L Na₂SO₄ solution. Photo current curve depends on the potential, passive condition and testing solutions. The results of the measurements indicate that the photoresponse is determined by the defects in the electronic structure of the films whenthe defects lead to localized states in the bandgap region. It is concluded that the passive film on AISI 304 stainless steel is in a highly disordered amorphous state.

Growth Kinetics And Breakdown Of Passive Films On Rebar Electrodes In Simulated Cement Pore Solution, Wei Chu, Yuanxiang Shi, Baoming Wei, Yong Yang, Xuguang Chen, Zugeng Lin

Journal of Electrochemistry

The growth kinetics and breakdown of passive films on REBAR electrodes insimulated cement solution (pH=12.5 and 13.8) have been investigated using in situ photoelectrochemical methods and potential step method. The results show that there are two mainstages in the growth of the film, with two rate functions characterized by linear relation between thefilm thickness and the direct logarithm of time. There is a sign in laser-scanning photoelectrochemical microscopic image just before the passive film breaks down. The addition of inhibitor NaNO₂ changes the growth kinetics and thickness of the film, and therefore improves the resistance of pitting corrosion induced …

Fabrication And Electrochemical Behaviors Of Thin Films Of Polyaniline By Langmuir-Blodgett Technique And Electropolymerization, Benzeng Hua, Zhaoxiong Xie, Yanzhen Chen, Yunhong Zhang

Journal of Electrochemistry

Hydrogen-bond between stearic acid and aniline in subphase lead to Langmuir monotayers of stearic acid-aniline, the molecular area of stearic acid-aniline is 26 nm². With surfacepressure increased into 50 mN/M, the hydrogen-bond would be rearranged, aniline molecular transales into vertical from horizontal, surface pressure decreased quickly. A new kind of Langmuirmonolayer is formed instead of collapse, it's molecular area decreases into 24 nm² and thicknessin creases with 0.25 nm. After electroreduction of L-B films depeited onto the surface of SnO₂ electrode, anilne layers between two stear acid matix could be polymerized into thin films of polyanilne. …

Cyclic Voltammetric Calorimetry Studying The Deposition Of Copper Of Pt Electrodes, Yongchun Zhu, Robin. H. J. Clark

Journal of Electrochemistry

In the present paper, cyclic voltammetric calorimetry has been used to study thedeposition of copper on platinum electrode from LiClO₄ aqueous solution. Cyclic voltammetric thermogram and cyclic voltammetric differential thermogram show that the deposition of copper on theelectrode is an exothermal process with a strong interaction between copper and platinum layer (-3227.0 kJ /mol). The electrochemical oxidation of the deposited copper is composed of twoprocesses: an endothermal activation process with 747.0 kJ/mol of activation enthalpy, and an exothermal oxidation reaction with -189.9 kJ/mol of the reaction enthalpy, which are accord with the data from the theoritical estimation and thermodynamic …

Electrochemical Behaviors Of The Loaded Stainless Steel In Dilute Thiosulphate Solution, Changjian Lin, Zude Feng, Fuling Lin, Fayang Wang, Jianguang Tang, Yuanhui Wang

Journal of Electrochemistry

The electrochemical behavior of 18/8 stainless steel in dilute thiosulphate solutionduring strained loading was studied by various electrochemical techniques and scanning electronmicroscope. It is evidenced that the corrosion activity of stainless steel increased with strained loading. The dynamic process of repassivation, which may datermine the initiation, the cease and development of the stress corrosion cracking for stainless steel, was strongly influenced by both electrochemical andloading conditions. Pitting corrosion may locate preferentially on the sites which was suffered mostloading. The propagation of pitting corrosion of stainless steel may induce stress corrosion crakingunder certain conditions.

Study Of The Modified Electrolytic Manganese Dioxide, Guohui Yuan, Dewei Chu, Rihui Shen, Hongwei Pan, Cuifen Zhang

Journal of Electrochemistry

A modified electrolytic manganese dioside doped with Bi (Bi-EMD)wasprepared and examined by XRD and XPS. It is predominantly γ-mnO₂ and the Bi exists as Bi₂O₃ in the modified material. The content of Bi in Bi-EMDs increased with the increasement of Bi³⁺ concentration in electrolyte, and reached 14.3(wt)% from the bath of 0.008 mol·L^-1 Bi³⁺ used. Some Zn/Bi-EMD prototype batteries of AA size were assembled, and which cycle life tests showedthat the Bi-EMD has better reversibility.

The Composition Structure And Corrosion Resistance Of Al-Mn Alloy Plating, Jiaju Guo, Naiming Guo

Journal of Electrochemistry

The Al-Mn alloy plating was electrodeposition from low temperature molten salts (below 200℃), its chemical composition control, corrosion resistance as well as the relationshipbetween chemical composition and structure were studied. The results indicate that the main effect onchemical composition of Al-Mn alloy plating is Mn ion concentration in molten salts. The Mn contentin the range of 25～40(wt)%, Al-Mn alloy plating has amorphous structure. In 0.5 mol/L H₂SO₄ and NaCl solution ,corrosion resistance of the alloy plating is much better. When the alloy has amorphous structure, corrosion resistance of plating has been remarkably increased.

Study Of The Action Mechanism Of A New Type Additive Sd-1 On The Electrodepositional Process Of Zinc, Huaqiang Wu, Yiqin Yan, Guangming Ni

Journal of Electrochemistry

The action mechanism of a new type additive SD-1 on the electrodepositionalprocess of zinc is reported.The results showed that the additive SD-1 is not electrochemistry activesubstane in the range of adsorption potential at rotating disk electrode surface. The action of additive SD-1 on the electrodepositional process of zinc is considerated to be fitting in with the diffusion controlmechanism.

Catalytic Oxidation Of Methanol On Pt/C-Spe And Ptru/C-Spe Electodes, Aihua Su, Changzhi Li, Gongquan Sun, Ying Zhang, Tianhong Lu

Journal of Electrochemistry

Anode catalysts of methanol oxidation for direct methanol fuel cell, Pt/C and PtRu/C, ere prepared by chemical reduction in this work. The results indicated that the PtRu/C showed higher electrocatalytic activity than that of Pt/C. It was explained by XRD and XPS analyses that the existence of Ru enhanced the catalytic activity for electrochemical oxidation of methanol.

Influence Of O-Phenylenediamine On The Catalysis At Hrp Enzyme Electrode In 1,4-Dioxane, Hong Chen, Hui-Huang Wu

Journal of Electrochemistry

Horseradish peroxidase (HRP) was immobilized by crosslinkage on the glassycarbon electrode to prepare the enzyme electrode, where the reduction of H₂O₂ was studied in 1,4-dioxane media. It was shown that HRP electrode can catalyze the reduction of H₂O₂ without anymedintor, however, as an activator, o-phenylenediamine can promote the bio-catalysis. In thepresence of the activator, the parallel reactions occurred on the enzyme electrode. The workingcondition of the HRP electrode was investigated as the sensors for H₂O₂ and o-phenylenediamine, also the influence of water content in organic phase was discussed on the performance …

Optical Characterization Of Indium Arsenide Antimonide Semiconductors Grown By Molecular Beam Epitaxy, Michael A. Marciniak

Theses and Dissertations

The material parameters and crystalline quality of undoped, MBE-grown InAs_1-xSb_x nearly lattice-matched to (100) GaSb (-0.617% ≤ Δ a-a ≤ +0.708%) similar to material used for mid-infrared semiconductor lasers were determined by optical characterization. Absorption measurements at temperatures between 6-295 K determined the energy gap and wavelength-dependent absorption coefficient for each sample. The compositional dependence of the energy gap was anomalous when compared to previously reported data, suggesting phase separation existed in the material. The samples were also studied by temperature- and excitation-dependent photoluminescence (PL), which, for the majority of cases, showed only a single band-edge peak, …

Development Of High Active Aluminum Alloy Sacrificail Anode, Zhaobo Wei, Jianhua Wu, Guangzhang Chen, Songrao Jiang, Zenya Li

Journal of Electrochemistry

A high active aluminum alloy sacrificial anode with the operating potential-1.40 v (SCE), and the the current capacity more than 2175 A·h/kg and dissolution fair issuccessfully developed by adding zinc, indium, gallium, bismuth and heat treatment. The aluminumalloy sacrificial anode with super electrochemical properties can throughly replace the magnesium alloyanode when applied to seawater and freshening seawater, which is obviously advantageous to thetechnology and economy.

Self-Assembled Monolayers: Preparation,Properties And Application, Xiandui Dong, Juntao Lu, Chuansin Cha

Journal of Electrochemistry

Self-assembling technique is a versatile approach to the preparation of monolayersof well-defined composition, structure, thickness and physicochemical properties. Different aspects, such as wettability, adhesion, corrosion, tribology, electrontransfer, protein adsorption, molecular recognition, and applications of SAMs are widely studied. The developments in the last decade arereviewed, with special attention to the electrochemical studies related to electrodes modified with thiol-derivative-based SAMs.

Problems On The Study Of Anodic Films On Pb In Sulfuric Acid Solution (Ⅰ), Wenbin Cai, Houtian Liu, Weifang Zhou

Journal of Electrochemistry

The identification of the phase composition of the anodic film on Pb formed in H₂SO₄ solution in PbO potential region has long been argued, together with the explanation of thecathodic peak at about -0.9V (Hg/HgSO₄) in the linear sweep voltammogram for a Pb-H₂SO₄ system. In this article, a review of our recent investigations was presented on the above problems.

Studies Of Cl- On The Electrochemical Oscillation Behaviour Of Electrodeposited Silver Indium Selenide Thin Films By Using Dynamic Impedance And The Condensance Method, Shaoai Xie, Xunnan Deng, Jinkua You

Journal of Electrochemistry

The electrochemical oscillation behaviour of hydrogen peroxide cathodic reductionprocess on the electro deposited silver indium selenide electrode has been studied by using in-situ dynamic impedance and the condensance measurement technique in different supporting electrolytes solutions. The surface composition of AglnSe₂ electrodes (before and after oscillating) were also givenby AES. According to the experimental results, the influence of Cl^- on the mechanism of this electrochemical oscillaton process has been discussed in detail.

The Photoelectrochemical Studies Of Passive Films On Rebar Electrodes In Simulated Cement Pore Solution, Wei Chu, Yuanxiang Shi, Baoming Wei, Yong Yang, Xuguang Chen, Zugeng Lin

Journal of Electrochemistry

The electronic properties of the passive film on REBAR electrodes in simulatedcement pore solution (pH=9.0～13.8) have been investigated using in-situ photoelectrochemical methods. The results show that the passive film is composed of mixed oxides of ferrum, and it is an amorphous, n-type semiconductive film. Variations of pH values, ions in the solution and film-formation potentials can affect the composition of the films. There are two main stages in the growthof the film, with two rate functions characterized by linear relation between the film thickness and thelogarithm of time. The addition of inhibitor NaNO₂ changes the composition, structure and growth …

Properties Of Zr-Based Laves Phase Hydrogen Storage Electrode, Xueping Gao, Huabin Yang, Deying Song, Yunshi Zhang, Zuoxiang Zhou, Wei Zhang, Panwen Shen

Journal of Electrochemistry

After treated by HF solution,the surface of Zr(V_0.2Mn_0.2Ni_0.54Mo_0.06)_2.4 alloy was transformed from Zr-rich and Mn-rich layer to Ni-rich layer. In this way, the nickel on thesurface could be believed to be the Raney-type nickel, which could obviously shorten the activation cycles, improve electrocatalytic activity and hydrogen adsorption ability. In this paper, the reaction mechanism on the alloy surface (i.e. the mechanism of nickel-catalysis, hydrogen-adsorption and hydrogen-transference) had been investigated. And the impedance spectra were fitted to an equivalentcircuit using a non-linear, least-squares (NLLS) fitting program.

Coadsorption Of Para-Toluene Sulfamide And 1.4-Butynediol At Mercury Electrode, Shukun Huang, Naixian Xie, De Gao, Qiang Liu

Journal of Electrochemistry

The coadsorption characteristics of para-toluene sulfamide and 1,4-butynediol atmercury electrode have been studied by means of electrocapillary curve, differential capacity curve, Stuart model and the SCFMO method (CNDO/2). The coadsorption is a physical adsorption occuringnaturally. Lateral and flat orientations in the two adsorbates close to their maximum adsorptionpotential were considered respectively. Unlike attractive interactions of their own, there was arepulsive interaction at their coadsorption layer. A preferred adsorption of 1,4-butynediol occurred when they were at the same volume concentration.

A Relativistic Density-Functional Investigation Of Vibrational Frequencies Of Cn- On Cu And Ag Electrodes, Mengsheng Liao, Xin Lv, Qianer Zhang

Journal of Electrochemistry

/

Studies On The Structure Of Licoo2 Synthesized With Tartaric Acid And The Behaviorof Its Rechargeable Lithium Battery, Fuping Zhang

Journal of Electrochemistry

The structure of LiCoO₂ synthesized with tartaric acid and the behavior of itsrechargeable Lithium battery have been studied by XRD, XPS, CV, CT. It has been shown that LiCoO₂ has a space group R3m with hexagonal parameters a=0.2810 nm, c=1.4088 nm. Low-spin state Co³⁺ configuration in LiCoO₂ has been suggested. Also, Li₂O, was identified onits surface. Furthermore, the capacity and the middle working voltage of its Lithium battery are about 120 mA·h·g^-1 and 3.8 V, respectively. The EMF of the cell changes with the Lithium composition of itscathode following E=4.318-0.450 X^2/3 in …