Materials Science and Engineering Commons^™

Panel On Liquefaction Of Ponded Fly Ash: From Laboratory To Practice, Tarunjit S. Butalia

World of Coal Ash Proceedings

No abstract provided.

Feed Control: Composite Recycle, Rosy Perez

All Undergraduate Projects

The Boeing Company gave Central Washington University an opportunity for students to research and come up with an idea to reduce costs and landfill waste caused by the trimmings from the 777x composite wing pieces. The engineering and manufacturing for this project is about transporting composite material through to the delamination and chipper process. The delamination process uses a ram to press two claw shaped devices together that bends and deforms the material in opposite directions. The chipper process uses counter rotating saw blades spaced 1/8” apart to produce small shredded material. It is important for this newly designed feed …

Leaching Characteristics Of Rare Earth Elements From Bituminous Coal-Based Sources, Xinbo Yang

Theses and Dissertations--Mining Engineering

The demand for rare earth elements (REEs) has increased over the last decade due to applications in high technology devices including those in the defense industry. The recovery of REEs from primary sources such as rare earth minerals are viable using physical separations followed by chemical processing. However, weak market values and environmental concerns have limited the viability of such operations. On the other hand, REE recovery from secondary sources such as apatite ore, bauxite waste, and waste recycling, provides an opportunity to take advantage of a resource that does not require mining costs as well as other associated costs …

Removal Of Antimony And Bismuth From Copper Electrorefining Electrolyte By Two Proprietary Solvent Extraction Extractants, Andrew Artzer

Masters Theses

"Antimony and bismuth are two of the most problematic impurities in copper electrorefining (ER). Because of this, much research has been done investigating the ways to remove them. Processes that are currently being used industrially include anode additions, liberators, ion exchange (IX), and solvent extraction (SX). Of these, liberators and anode additions are the most common while SX is the least, mostly being used for arsenic removal. There are other methods that have been evaluated, but are not in commercial use. These include the use of various electrolyte additives, and adsorbents such as bentonite clay and heavy metal sulfates.

Two …

Improving Base Metal Electrowinning, Charles Ebenezer Abbey

Doctoral Dissertations

"In zinc electrowinning, Mn oxidizes to form MnO₂ on Pb-Ag anodes, cell walls and pipes. MnO₂ reduces anode corrosion but also leads to short circuits and maintenance issues. MnO₂ is thought to interact with chloride ions and produce oxidized chlorine species. The interactions between Mn and Cl are not well understood. Bench scale experiments were conducted to investigate the effects of the manganese to chloride ratio on anode corrosion rate and electrolyte chemistry using rolled Pb-Ag anodes. Increasing the average Mn/Cl^- ratio from ~7:1 to ~11:1 reduced the anode corrosion rate. Anode scales produced with Mn/Cl …

Detonation Synthesis Of Alpha-Variant Silicon Carbide, Martin Langenderfer, Catherine E. Johnson, William Fahrenholtz, Vadym Mochalin

Mining Engineering Faculty Research & Creative Works

A recent research study has been undertaken to develop facilities for conducting detonation synthesis of nanomaterials. This process involves a familiar technique that has been utilized for the industrial synthesis of nanodiamonds. Developments through this study have allowed for experimentation with the concept of modifying explosive compositions to induce synthesis of new nanomaterials. Initial experimentation has been conducted with the end goal being synthesis of alpha variant silicon carbide (α-SiC) in the nano-scale. The α-SiC that can be produced through detonation synthesis methods is critical to the ceramics industry because of a number of unique properties of the material. Conventional …

Hawai'i Wildlife Fund V. County Of Maui, Lowell J. Chandler

Public Land & Resources Law Review

In Hawai’i Wildlife Fund v. County of Maui, the Ninth Circuit held that the plain language of the Clean Water Act provides jurisdiction over indirect discharges of pollutants from a point source into groundwater that is shown to be connected to navigable waters. The court found that studies confirmed pollutants entering the Pacific Ocean were fairly traceable to the County of Maui’s sewage disposal wells. In affirming the district court’s ruling, the Ninth Circuit held that Maui County violated the Clean Water Act by discharging pollutants into a navigable water without the required permit. The court also concluded the …

A New Hybrid Decision Support Tool For Evaluating The Sustainability Of Mining Projects, S. Kamenopoulos, Zacharias Agioutantis, K. Komnitsas

Mining Engineering Faculty Publications

The integration of sustainable development challenges and opportunities into the decision making process during the design and/or implementation of multi-disciplinary mining projects is generally not supported by decision support systems (DSS). A new hybrid decision support tool, which features an integrated assessment of sustainable development issues as they apply to mining projects, is hereby proposed. The proposed DSS framework, named “Acropolis DSS”, can be used to assist involved stakeholders in critical decisions, especially when addressing issues such as stakeholder participation, transparency, and trade-offs. The proposed DSS is based on a multi-criteria decision analysis combined with the multi-attribute utility theory.

Mitigation Of Environmental Hazards Of Sulfide Mineral Flotation With An Insight Into Froth Stability And Flotation Performance, Muhammad Badar Hayat

Doctoral Dissertations

"Today's major challenges facing the flotation of sulfide minerals involve constant variability in the ore composition; environmental concerns; water scarcity and inefficient plant performance. The present work addresses these challenges faced by the flotation process of complex sulfide ore of Mississippi Valley type with an insight into the froth stability and the flotation performance. The first project in this study was aimed at finding the optimum conditions for the bulk flotation of galena (PbS) and chalcopyrite (CuFeS₂) through Response Surface Methodology (RSM). In the second project, an attempt was made to replace toxic sodium cyanide (NaCN) with the biodegradable chitosan …

Controlling Properties Of Agglomerates For Chemical Processes, Joseph A. Halt

Dissertations, Master's Theses and Master's Reports

Iron ore pellets are hard spheres made from powdered ore and binders. Pellets are used to make iron, mainly in blast furnaces. Around the time that the pelletizing process was developed, starch was proposed as a binder because it’s viscous, adheres well to iron oxides, does not contaminate pellets and is relatively cheap. In practice, however, starch leads to weak pellets with rough surfaces – these increase the amount of dust generated within process equipment and during pellet shipping and handling. Thus, even though the usual binder (bentonite clay) contaminates pellets, pelletizers prefer it to starch or other organics.

This …

Material Properties Affecting The Penetration Of Metal Targets By Copper Linear Shaped Charges, Kevin Lee Phelps

Masters Theses

"A linear shaped charge (LSC) is an explosive device used in demolition, aerospace, and in other applications that require the cutting of metal. Users of LSC's typically know the size of shaped charge needed to cut their target but commonly encounter previously untested materials. The motivation for this thesis is to provide an understanding as to what target material properties are good indicators of cutting performance so the selection of LSC can be more efficient. The author found that penetration theories for other types shaped charges were insufficient for the LSC, possibly because of the relatively slow projectile created by …

Sustainable Disposal Of Coal Processing Waste Streams, Mohammad Rezaee

Theses and Dissertations--Mining Engineering

Modern coal preparation facilities incorporate a wide array of solid-solid and solid-liquid separation processes for rejecting mineral matter to meet market specifications. The coarse mineral matter is typically placed into engineered refuse piles whereas the fine refuse is either stored in impoundments or co-disposed with the coarse refuse. The discharge water from the refuse material represents an environmental concern due to the potential release of trace elements, and the subsequent elevation of total dissolved solids and conductivity. The research findings reported in this dissertation addresses sustainable coal processing waste disposal through using strategies aimed at minimizing the environmental impacts. To …

Geostatistical Methods For Estimating Iron, Silica And Alumina Grades Within The Hardcap Of The Section Seven Iron Deposit, Tom Price, Philip John Savory

Theses: Doctorates and Masters

Many iron ore deposits have a weathered zone (Hardcap) near the surface which is highly variable in grades. Estimating the amount of ore grade material (HG) in this zone is difficult as a result of this variability. The Section Seven Deposit at Tom Price is largely mined out and has production data available in the form of grade blocks that were marked out during mining as HG and non- HG. Hardcap domains and a block model representing them were created and estimates were made from original exploration data using Ordinary Kriging, Global Change of Support, Indicator Kriging and Median Indicator …

Non-Ferrous Metal Mining And Smelting In Australia

School of Mines and Metallurgy Bulletins

Bulletin was published without an Abstract

New Genera And Species Of Myripristid Fishes, In The Gulf Coast Cenozoic, Known From Otoliths (Pisces, Beryciformes)

School of Mines and Metallurgy Bulletins

Studies of fossil and Recent otoliths (sagittae) supply an important line of evidence, bearing on classification of teleost fishes, supplementary to that of anatomy, osteology, and "phylogenetic" paleoichthyology.

Squirrelfishes ( " Holocentridae" of authors) are generalized forms in which evolutionary divergence of some mag nitude is reflected in unpreservable details of anatomy, inconspicuous skeletal structures, and striking differentiation of the sagittae. Otoliths show the holocentroid complex to consist of one homogeneous unit (l\fyripristidae, elevated) and another more heterogeneous group (Holocentridae, restricted). These lineages have been separate. at least since the middle Eocene.

A revised classification, based on available lines of …

Crustacean Gastroliths From The Jackson Eocene Of Louisiana

School of Mines and Metallurgy Bulletins

Wechesia louisianae, n. sp., is described from upper Eocene beds at Montgomery, Louisiana. Second species of the genus, it extends the range of Wechesia Frizzell and Exline from Claiborne (middle) Eocene and validates the generic diagnosis.

Magma 1959, Associated Students Of The Montana State School Of Mines.

Magma 1948-1997

Any year book has as its prime purpose the depiction of a school year in a manner that will recall the maximum of memories in future years. The Magma this year utilizes memories as a theme, but places a slight accent on those of the graduating seniors.

Spilitic Rocks And Mineral Deposits

School of Mines and Metallurgy Bulletins

The principal results of research work on spilitic rocks and mineral deposits carried on since 1945 are briefly summarized. Emphasis is placed on the influence of the results on the theories of rock and ore genesis, particularly the change of "philosophy of exploration" based on the existence of hydromagmatic ore deposition. A re-classification of magmatic mineral deposits is offered.

Laboratory Concentration Of A Lead-Zinc-Fluorspar Ore From Southern Illinois, Shiou-Chuan Sun

Masters Theses

"The purpose of this investigation was to ascertain the feasibility of preparing marketable products from a rather complex sulphide-fluorspar ore"--Object, page 2. "The ore was examined exhaustively by chemical, microscopic, and mineralogical methods of analysis. After a thorough knowledge of the physical characteristics of the ore had been obtained, flotation concentration tests were made to separate the sulfide minerals from the fluorspar and to attempt to prepare lead-zinc and fluorspar concentrates of marketable grade"--Scope of Work Done, page 2.

Some Early Geologists And Their Work In Montana, John E. Blixt

Bachelors Theses and Reports, 1928 - 1970

This paper marks an increased refinement and more detailed accuracy in the description of the geological features of the state. It includes the recent studies of mineral deposits, of oil structures, of the formations of bedded rocks and their included fossils, carried on both by the Federal and State governments and by various interested private persons, such as the mining companies. It is within this period that the Federal Government encouraged the U. S. Geological Survey in the publication of monographs on the National Parks, papers of great popular interest and educational value making these beautiful regions comprehensible in their …

A Study To Determine The Best Method Of Treatment For A Certain Gold-Silver Ore, Deane Dwight Harris, Duane Montgomery Kline

Professional Degree Theses

"The purpose of this thesis is to find a suitable method for extracting the gold and the silver from an amalgamation tailing"--Purpose, page 1.

Russell's Lixiviation Process For Silver Ores, Frank L. Tyrrell

Professional Degree Theses

"It has long been known that there are many ores worked in which a large per cent of silver and gold are continually lost, either in tailings or slimes. As far back as 1848 Dr. Percy suggested the extraction of silver from argentiferous ores, by its conversion into the chloride. The chloride was treated with sodium hyposulphite"--Russell's Process, page 1.

The Cyanide Process For Gold, John C. Reid

Bachelors Theses

"Since the discovery of Cyanogen in the latter part of the 18th century records of many experiments are in existence, showing, that at various periods, exhaustive researches have been made, in which the point at issue was to investigate that property which now constitutes the foundation of what is known to Metallurgical Science of today as The Cyanide Process, vis. The solvent power of alkali cyanides on gold & silver"--page 2.