Materials Science and Engineering Commons^™

The Applications Of Poap Ni2+ Films Modified Electrode As Sensor For Alcohol, Bingzeng Hua, Wenyun Hu, Yanzhen Chen

Journal of Electrochemistry

POAP Ni²⁺ films modified electrode can electrocatalyzes significantly the oxidation of alcohol. The modified electrode can be used as the electrochemical sensor for the detection of alcohol. But the oxidation of alcohol is effected by the thickness of films、the concentration of nickel ion in films, pH of electrolyte, as well as temperative. All of those conditions have been studied in order to achieve stable response current during the oxidation of alcohol, and the relation between concentration and current has been made. At last the major characteristic parameters, such as the low limitation of concentration, the response time, the ability …

Problems On The Study Of Anodic Films On Pb In Sulfuric Acid Solution (Ⅱ), Houtian Liu, Qunzhou Wang, Yongqin Wan, Weifang Zhou

Journal of Electrochemistry

The conditions for the growth of the different phases in the anodic Pb(Ⅱ) film on Pb in sulfuric acid solution were discussed.

Status Of The Research And Development For Fuel Cell Technology Abroad, Naichao Li, Baolian Yi

Journal of Electrochemistry

Status of the research and development for fuel cell technology abroad was overviewed, and at the aim of accelerating the research and development for fuel cell technology in China, the corresponding stategy for our country was recommended.

Surface Raman Spectra Of Pyridine And 2 Mercaptopyrimidine Adsorbed On Rough Nickel Electrode, Qunjian Huang, Jinsong Gao, Xiongwei Cai, Bingwei Mao, Mingsen Zheng, Zhongqun Tian

Journal of Electrochemistry

The Raman spectra of pyridine and 2-mercaptopyrimidine (2-MP) adsorbed on bare nickel electrodes roughened by a HNO₃ etching procedure have been obtained for the first time by utilizing a highly sensitive confocal Raman microscope. Their adsorption behaviours are discussed briefly. This primary result illustrates a great potential for in-situ Raman spectroscopy in the study of chemical and electrochemical processes of transition metal surfaces.

Electrocatalytic Oxidation Of Some C2 Compounds (Alcohols, Aldehydes, And Carboxylic Acids) On A Pt/SbAd Electrod, Hong Li, Lincai Jiang, Xiong Jiang

Journal of Electrochemistry

The electrocatalytic oxidation behavior of some C₂ compounds(alcohols, aldehydes and carboxylic acids) on a Pt/Sb_ad electrode prepared in-situ or ex-situ UPD was investigated using pontential sweep and rotating disc electrode methods. It is confirmed that Pt/Sb_ad electrode show the most electrocatalytical active to the oxidation of aldehyde functional group and only a little activity to the oxidation of hydroxyl group, but no activity for the oxidation of carboxyl group.

The experimental results show that the activity of the Pt/Sb_ad electrode prepared by ex-situ UPD is higher than that prepared by in-situ UPD.

The limitations of the …

In Situ Studies Of Copper Electrodepostion On Hopg By Using Ecstm, Zhaoxiong Xie, Bingwei Mao, Xiangdong Zhuo, Jiqian Mu, Zhaowu Tian

Journal of Electrochemistry

In this paper, copper electrodepostion on HOPG had been in situ studied by using a homebuilt electrochemical scanning tunneling microscopy (ECSTM). Three dimensional nucleation and subsequent growth of copper crystals were found as the initial stage of copper deposition on HOPG. In the case of lower overpotential or lower concentration of Cu²⁺ , the bulk deposited copper layer tended to form smooth terraces, and grow at the edge of steps. The terraces were stable to some extent, which made it possible to be observed with atomic resolution. At a higher overpotential, the crystal size of copper were somehow smaller. …

The Reduction Of Oxygen To Hydrogen Peroxide In An Acidic Trickle Bed Cell Using Graphite Chip Cathode, Zhaoe Lu, Guanyong Zhang, Tiangeng Zhong, Guonu Fang

Journal of Electrochemistry

The authors investigated the electrochemical reduction of oxygen to hydrogen peroxide in 0.05 mol/L H₂SO₄ solution by the trickle bed electrode using graphite chip. The bed dimension was 14×5×0.6 cm. The current efficiency and the concentration of H₂O₂ in the catholyte were determined at various current strengths and various rates of adding the electrolyte. The proper current was 0.15 A. i.e. the current density was 2.1 mA/cm² vertical cross section area of the bed. The concentration of H₂O₂ reached 7×10^-3 mol/L with the current efficiency of 0.2. If the …

An Indirect Electrochemical Oxidation Of Toluene─Catalytic Effects Of Ag(Ⅰ) On Mn(Ⅱ)/Mn(Ⅲ) Couple Transition At Pt Electrode, Zhonghua Wang, Yunan Qu, Xingguo Yan, Qngmin Hua, Guacai Chen, Zhongquan Wang

Journal of Electrochemistry

The Catalytic effects of Ag(Ⅰ) on toluene oxidation by Mn(Ⅲ) as well as the anodic generation of Mn(Ⅲ) were investigated. The rates of toluene oxidation were first order with respect to both Ag(Ⅰ) and Mn(Ⅲ). Ag(Ⅱ) formed on the surface of the platinum anode when Ag(Ⅰ) was present in the anolyte, which catalyic the Mn(Ⅱ) to Mn(Ⅲ) in solution.

Preparation Techique Of Foamed Nickel By Electrodeposition, Xihua He, Ronghui Hu, Hanxi Yang, Zhengzhong Zuo

Journal of Electrochemistry

This paper describes the preparation technique and operation conditions for manufacturing foamed nickel by chemilcal pretreament, electrodeposition and heat treatment. The foamed nickel made in this method showed high porosity, uniformity and considerable strength and tenacity,applicable for various secondary battery electrodes.

Research On Molten Carbnate Fuel Cell, Naichao Li, Baolian Yi, Lianying Kong, Enjun Zhang, Huaxin Lin, Tianxi Qu, Yingcai Cheng

Journal of Electrochemistry

Cold-roll-milling has been evaluated as a technique for preparing porous LiAlO₂ matrices for use as a molten carbonate fuel cell electrolyte matrix. This technique produces reliable electrolyte structures with the following characteristics and advantages: ease of handling, uniform thickness, using nontoxic inorganic solvents, controlled pore size distribution, and ability to be impregnated with the alkali carbonate without fracrure.

The Molren Carbnatod Fuel Cell (MCFC) was assembled from sintered Ni electrodes and LiAlO₂ electrolyte matrix, the electrode area is 28 cm², the effect of operating conditions on cell performance was tested, it was found that the cell …

Study On The Manufacture Of Pt/C Gas-Diffusion Electrodes, Yonglin Ma

Journal of Electrochemistry

The various methods of manufacturing gas-diffusion electrodes are reviewed and a new method of preparing the Pt/C electrocatalyst and the gas-diffusion electrodes is explored in this paper. The electrochemical performance of resulting electrodes in concentrated phosphoric acid for oxygen reduction at 150℃ are compared with the commercial electrode which purched from Giner Inc. (U. S. A). The results show that the performance of the Pt/C electrodes which manufactured by the method in this paper has been greatly improved. Therefor, a fuel cell using such electrodes has high industrial value.

The Inhibition Of Amphipathic S- And N-Containing Compounds On Carbon Steel Corrosion, Wei Xing, Yibin Shan, Du Guo, Tianhog Lu, Shiquan Xi

Journal of Electrochemistry

Ordered monolayers of S- and N-containing amphipathic corrosion inhibitors were depoitod onto the surfaces of carbon steel electrode with super-molecular assembly technique. The effect of molecular aggregation of monolayers on carbon steel corrosion in 0.05 mol·cm^-3 H₂SO₄ and the mechanisms of these inhibitors were discussed in details. It was found that the transport of hydrated hydrogen ion to the surface of steel depends strongly on the inhibitor molecular aggregation in the monolayers.

Development Of The High Capacity Sintered Type Nickel Positive Electrode, Guohua Yu, Shijie Zhang, Xiaolin Wang, Jingqi Wei

Journal of Electrochemistry

By improving the design and technologies of the sintered type nickel oxide positive electrode for the NiMH batteries, We do our best to increase the sinter volume and porosity,the amount of the active materals and their utilization, so we have fabricated the high capacity sintered typo nickel electrodes fitting for the NiMH battreies. The sfecitic capacity of the lot produced electrodes is up to 550 mA/cm^-3.

The Influence Of Cathode Ingredients In Zinc Chloride Type Battery On The Discharge Ability, Qi Shen, Biao Zhuang

Journal of Electrochemistry

The influence of cathodic powder ingredients in ZnCl₂ type heavy duty battery on the discharge ability has been studied, a suitable battery ingredients is founds.

Electrochemical Studies On Corroding Metallic Electrodes In Frequency Domain, Chunan Cao

Journal of Electrochemistry

The electrochemical studies on corroding metallic electrodes carried out in the State Key Laberatory for Corrosion and Protection are reviewed briefly: (1) General equations of faradaic admittance under potential-control condition were derived based on the stabillity conditions of steady processes. The faradaic admittance at mixed potential then was deduced based on these equations and the electrochemical impedance spectroscopy (EIS) at corrosion potentials in the solutions containing interface inhibitors was diseussed by application of the thecetical results obtained. (2) The spectral power density (SPD) curves for electrochemical noise (EN) during the initial stagu of pitting corrosion were observed for iron and …

Ftis Observation Of Twin Adsorbates Of Co On Rh Electrode In Acid Solution, Wenfeng Lin, Shigang Sun

Journal of Electrochemistry

Because of its great importance both in electrocatalysis and C1 chemistry applications, the adsorption of CO on metallic electrodes such as Pt, Pd, Au, Ag, RhF, etc. has been extensively studied by in situ infrared spectroscopy Since 1981. In all these studies only three types of CO adsorbates, i. e., linear (2090～2000 cm^-1), bridgrd (2000～1900 cm^-1) or multi-bonded (1900～1800 cm^-1) species, were identified. A different absorbate, twin CO on rhodium (Rh(CO)₂), does exist on the solid/gas interface of highly dispersed Rh or Rhn clusters on supports, this species originating a doublet at …

Hydrogen Evolution Reaction On Nanocrystalline Co-Mo/Ni Composite-Coated Electrodes, Weizeng Yu, Jie Ma, Yiming Chu, Huizhe Zhu, Hongjie Wang, Shuncheng Liu

Journal of Electrochemistry

The electrochemical behaviours of the hydrogen evolution reaction (HER) at electrodes prepared by composite coating of nanocrytstalline Co-Mo alloy particles formed by ball milling on nickel base has been sludied by using sleady-state polarization and ac impedance techiu ques. The microstructure and the size of the nanocrystals of Co-Mo alloy and the morphology of the composite-coating surface of the electrodes are measured by XRD, TEM and SEM. Results show that the nanocrystalline Co-Mo alloys prepared by high energy ball milling has high electrocatalytic activity for HER. The electrocatalytic activity for the HER is enhanced and the energy of activation for …

Thermal Stresses In End-Heated Layered Media, Jerry R. Couick

Theses and Dissertations

Thermal stresses in semi-infinite layered beams heated on the end are calculated using an extension to simple bimetallic thermostat theory. Recently, researchers have used the concept of interfacial compliance to determine interlaminar stresses in a simple thermostat of finite length subjected to a uniform temperature increase. In the present work, the thermostat theory is extended to apply to the beams of interest. A closed-form solution to the problem is obtained. It is not applicable within about one beam thickness (St Venant boundary region) of the end. Various classes of layered materials are analyzed to determine if significant stresses exist outside …

The Composition Structure And Corrosion Resistance Of Al-Mn Alloy Plating, Jiaju Guo, Naiming Guo

Journal of Electrochemistry

The Al-Mn alloy plating was electrodeposition from low temperature molten salts (below 200℃), its chemical composition control, corrosion resistance as well as the relationshipbetween chemical composition and structure were studied. The results indicate that the main effect onchemical composition of Al-Mn alloy plating is Mn ion concentration in molten salts. The Mn contentin the range of 25～40(wt)%, Al-Mn alloy plating has amorphous structure. In 0.5 mol/L H₂SO₄ and NaCl solution ,corrosion resistance of the alloy plating is much better. When the alloy has amorphous structure, corrosion resistance of plating has been remarkably increased.

Study Of The Action Mechanism Of A New Type Additive Sd-1 On The Electrodepositional Process Of Zinc, Huaqiang Wu, Yiqin Yan, Guangming Ni

Journal of Electrochemistry

The action mechanism of a new type additive SD-1 on the electrodepositionalprocess of zinc is reported.The results showed that the additive SD-1 is not electrochemistry activesubstane in the range of adsorption potential at rotating disk electrode surface. The action of additive SD-1 on the electrodepositional process of zinc is considerated to be fitting in with the diffusion controlmechanism.

Catalytic Oxidation Of Methanol On Pt/C-Spe And Ptru/C-Spe Electodes, Aihua Su, Changzhi Li, Gongquan Sun, Ying Zhang, Tianhong Lu

Journal of Electrochemistry

Anode catalysts of methanol oxidation for direct methanol fuel cell, Pt/C and PtRu/C, ere prepared by chemical reduction in this work. The results indicated that the PtRu/C showed higher electrocatalytic activity than that of Pt/C. It was explained by XRD and XPS analyses that the existence of Ru enhanced the catalytic activity for electrochemical oxidation of methanol.

A Photoelectrochemical Investigation Of A.C.Modulated Passive Films On 304 Stainless Steel In Weak-Alkaline And Neutral Solution, Tianbao Du, Chunan Cao, Jiakang Yu, Haichao Lin

Journal of Electrochemistry

A photoelectrochemical investigation has been carried out on AISI 304 stainless steeI AV modulated passive film in 0.1mol/L Na₂B₄O₇ and 0.5 mol/L Na₂SO₄ solution. Photo current curve depends on the potential, passive condition and testing solutions. The results of the measurements indicate that the photoresponse is determined by the defects in the electronic structure of the films whenthe defects lead to localized states in the bandgap region. It is concluded that the passive film on AISI 304 stainless steel is in a highly disordered amorphous state.

Growth Kinetics And Breakdown Of Passive Films On Rebar Electrodes In Simulated Cement Pore Solution, Wei Chu, Yuanxiang Shi, Baoming Wei, Yong Yang, Xuguang Chen, Zugeng Lin

Journal of Electrochemistry

The growth kinetics and breakdown of passive films on REBAR electrodes insimulated cement solution (pH=12.5 and 13.8) have been investigated using in situ photoelectrochemical methods and potential step method. The results show that there are two mainstages in the growth of the film, with two rate functions characterized by linear relation between thefilm thickness and the direct logarithm of time. There is a sign in laser-scanning photoelectrochemical microscopic image just before the passive film breaks down. The addition of inhibitor NaNO₂ changes the growth kinetics and thickness of the film, and therefore improves the resistance of pitting corrosion induced …

Cyclic Voltammetric Calorimetry Studying The Deposition Of Copper Of Pt Electrodes, Yongchun Zhu, Robin. H. J. Clark

Journal of Electrochemistry

In the present paper, cyclic voltammetric calorimetry has been used to study thedeposition of copper on platinum electrode from LiClO₄ aqueous solution. Cyclic voltammetric thermogram and cyclic voltammetric differential thermogram show that the deposition of copper on theelectrode is an exothermal process with a strong interaction between copper and platinum layer (-3227.0 kJ /mol). The electrochemical oxidation of the deposited copper is composed of twoprocesses: an endothermal activation process with 747.0 kJ/mol of activation enthalpy, and an exothermal oxidation reaction with -189.9 kJ/mol of the reaction enthalpy, which are accord with the data from the theoritical estimation and thermodynamic …

Study Of The Modified Electrolytic Manganese Dioxide, Guohui Yuan, Dewei Chu, Rihui Shen, Hongwei Pan, Cuifen Zhang

Journal of Electrochemistry

A modified electrolytic manganese dioside doped with Bi (Bi-EMD)wasprepared and examined by XRD and XPS. It is predominantly γ-mnO₂ and the Bi exists as Bi₂O₃ in the modified material. The content of Bi in Bi-EMDs increased with the increasement of Bi³⁺ concentration in electrolyte, and reached 14.3(wt)% from the bath of 0.008 mol·L^-1 Bi³⁺ used. Some Zn/Bi-EMD prototype batteries of AA size were assembled, and which cycle life tests showedthat the Bi-EMD has better reversibility.

Influence Of O-Phenylenediamine On The Catalysis At Hrp Enzyme Electrode In 1,4-Dioxane, Hong Chen, Hui-Huang Wu

Journal of Electrochemistry

Horseradish peroxidase (HRP) was immobilized by crosslinkage on the glassycarbon electrode to prepare the enzyme electrode, where the reduction of H₂O₂ was studied in 1,4-dioxane media. It was shown that HRP electrode can catalyze the reduction of H₂O₂ without anymedintor, however, as an activator, o-phenylenediamine can promote the bio-catalysis. In thepresence of the activator, the parallel reactions occurred on the enzyme electrode. The workingcondition of the HRP electrode was investigated as the sensors for H₂O₂ and o-phenylenediamine, also the influence of water content in organic phase was discussed on the performance …

Studies Of Cl- On The Electrochemical Oscillation Behaviour Of Electrodeposited Silver Indium Selenide Thin Films By Using Dynamic Impedance And The Condensance Method, Shaoai Xie, Xunnan Deng, Jinkua You

Journal of Electrochemistry

The electrochemical oscillation behaviour of hydrogen peroxide cathodic reductionprocess on the electro deposited silver indium selenide electrode has been studied by using in-situ dynamic impedance and the condensance measurement technique in different supporting electrolytes solutions. The surface composition of AglnSe₂ electrodes (before and after oscillating) were also givenby AES. According to the experimental results, the influence of Cl^- on the mechanism of this electrochemical oscillaton process has been discussed in detail.

Theory Of Cyclic Voltammetry At Microdisk Electrode For Reversible Systems, Qiankun Zhuang, Hongyuan Chen

Journal of Electrochemistry

By means of a new approach, the current equations of cyclic voltammetry which describes two cases of quasi-steady-state and fast linear scan at microdisk electrode for reversiblesystem were presented and verified experimentally. It has been shown that the features of this currentessentially depend on the ration of, which is described in detail. ln extreme cases, the equationsare the same as those listed in literatures for large plane and spherical electrodes. Using the quasi-steady-state equation, the causes and conditions for forming steady state, quasi-steady state andhysteresis current for linear sweep voltammetry are all explained and discussed. The width of the ″hysteresis …

Coadsorption Of Para-Toluene Sulfamide And 1.4-Butynediol At Mercury Electrode, Shukun Huang, Naixian Xie, De Gao, Qiang Liu

Journal of Electrochemistry

The coadsorption characteristics of para-toluene sulfamide and 1,4-butynediol atmercury electrode have been studied by means of electrocapillary curve, differential capacity curve, Stuart model and the SCFMO method (CNDO/2). The coadsorption is a physical adsorption occuringnaturally. Lateral and flat orientations in the two adsorbates close to their maximum adsorptionpotential were considered respectively. Unlike attractive interactions of their own, there was arepulsive interaction at their coadsorption layer. A preferred adsorption of 1,4-butynediol occurred when they were at the same volume concentration.

A Relativistic Density-Functional Investigation Of Vibrational Frequencies Of Cn- On Cu And Ag Electrodes, Mengsheng Liao, Xin Lv, Qianer Zhang

Journal of Electrochemistry

/