Materials Science and Engineering Commons^™

Evaluation Of The Transport Properties Of Gasb For Bipolar Applications Through Monte Carlo Simulations, Damayanthi Palaniappan

Electrical & Computer Engineering Theses & Dissertations

GaAs is currently the semiconductor material of choice for high speed, low power applications. Its electronic transport properties are superior to almost all other semiconductors. It is also used in a variety of bipolar applications such as photodetectors and photo-mixers. However, as is well known, the hole mobility and related transport parameters of GaAs are not very good. This is a serious drawback, and poses a potential problem for all applications involving bipolar conductivity. In order to increase the high :frequency limits and high-speed capability of bipolar devices, the choice of an alternative material, therefore, becomes necessary. An important first …

The Ac-Impedance Analysis For Pluse Oxide Film Of Aluminium Alloy, Ai-Ling Du, Xi-Cheng Ma, He-Ming Zhang

Journal of Electrochemistry

Bode diagrams for aluminum PC (abbreviated from pulse current) oxide films were first obtained by AC-impedance measurements in a wide range of frequency. The experimental results show that different kinds of electrical equivalent circuits can be used for representing PC films and DC (abbreviated from direct current) oxide films separately, the main differences between them are their porous layers, the PC films are more even with little defects.Those are also verified by SEM and V-I characteristic curve measurements.

Deactivation Of Nickel Oxide/Hydroxide To Electrooxidation Of H2Po2 Anions On Nickel Electrodes In Alkaline Solutions, Tai-Xiang Jiang, Hui-Huang Wu

Journal of Electrochemistry

Electrooxidation of hypophosphite anions on polycrystalline nickel in alkaline solutions has been investigated by cyclic voltammetry and open circuit potential measurements. The results are explained based on the mechanism that the first step of hypophosphite oxidation is the adsorption of hypophosphite ions on nickel, followed by the homolysis of its hydrogen bond with the formation of radicals. The oxidation of hypophosphite on nickel in alkaline medium occurs at lower potentials between ca. -0.8 V— -1.1 V (SCE) and phosphite ion is the only oxidation product. There is no indication of hypophosphite oxidation at higher potentials. Severe deactivation of the surface …

Structural And Electrochemical Studies On Lithium Manganese Oxide Containing Li+ Prepared By Hydrothermal Method For Lithium Ion Batteries, De-Yao Liu, Jin-Kua You, Wei Chu, Yong Yang, Zu-Geng Lin

Journal of Electrochemistry

In this paper, Todorokite manganese oxides containing Li⁺ with large tunnel structure (sample M5) have been synthesized by hydrothermal methods from natural manganese oxide nano fiber (sample M4). The structure and composition of the samples were characterized and analyzed by XRD, ICP, TGA and DTA. Its electrochemical behavior as a cathode materials for rechargeable lithium ion insertion were studied by galvanostatic charge/discharge measurements. XRD results show that the sample M4 is mainly composed of Birnessite and Vernadite structure. Although the sample M4 shows a high initial capacity of approximately 150 mAh/g, its performances decrease gradually over 30 cycles. It …

The Techniques Of The Paired Electrosynthesis, Hong-Kun Zhang, Deng-Ping Gu

Journal of Electrochemistry

In this Paper, we introduce our work on paired electrosynthesis. In conjunction with our research practice, we introduce electrolytic conditions,such as material of electrode ,courrent density and electrolytic temperature etc,as reference for researcher. We categorize the paired electrosynthesis techniques to widen our view on the paired electroorganic synthesis and to promote the deveopments of paired electrosynthesis techniques.

Study On Synthesizing Of 2-Methylbutanoic Acid By Indirect Electrooxidation, Chong-Tao Zhao, Ze-Shan Zhu

Journal of Electrochemistry

The working conditions of synthesizing 2-methylbutanoic acid by oxidizing 2-methyl-1-butanol with tetrabutylammonium hydrosulfate (TBAS) or tetrabutylammonium perchlorate (TBAP) as phase transfer catalyst in sulfuric acid Cr(Ⅵ) oxidation medium was studied. The Cr(Ⅵ) oxidation medium could be electrolytic regenerated from Cr(Ⅲ), during above oxidation reaction. Under the optinum condition, the yield of 2-methylbutanoic acid is more than 95%.

Electrochemical Synthesis Of Fes Electrode And Its Behavior Measurement, Cong-Sheng Guan

Journal of Electrochemistry

The Potential for the electrochemical synthesis of FeS electrode has been obtained by cyclic voltammetry. FeS electrodes were synthesiaed by controlling Fe electrode at -1.0 V in LiCl-KCl-Li₂S and Li(FClI)-Li₂S melts and their behavior were measured also. The FeS electrode synthesized in molten Li(FClI)-Li₂S has the best charge and discharge properties.

Electrochemical Behavior Of Riboflavin On Glassy Carbon Electrode, Hong Li, Lin-Cai Jiang, Liang-Nian Ji

Journal of Electrochemistry

The electrochemical behavior of riboflavin(RF) on glassy carbon has been investigated by using potential sweep, rotating ring-disc electrode and the measurement of differential capacitance. It is shown that a single well-behaved oxidation-reduction wave corresponding to a reversible two-electrons reaction apears in medium of pH<6, and the adsorption of RFH₂ formed by electro-reduction is weak and hence its solubility is good. In medium of pH>6, there are two separating but overlapping partly oxidation-reduction waves corresponding to two-step one-electron reaction. The adsorptions of RFH and RFH₂ produced by reduction reactions in medium of 6

Oxidation And Adsorption Of Deoxyribonucleic Acid At Highly Ordered Pyrolytic Graphite And Glass Carbon Electrode, Jian-Zhang Zhou, Ling-Ling Wu, Jin Luo, Zhong-Hua Lin

Journal of Electrochemistry

It is shown that calf thymus DNA (CT DNA) can be adsorbed at highly ordered pyrolytic graphite (HOPG) electrode and detected by differential pulse voltammetry (DPV) and electrochemical atomic force microscopy (ECAFM). It is found that controlled potential pre-polarization influences largely the adsorption of dsDNA while it has little influence on ssDNA. It is demonstrated that ECAFM is useful to exploit adsorption of DNA at HOPGE. The pattern of adsorption of DNA at HOPG electrode that fits best with the experimental data is proposed. The results aslo shows that UV/Vis reflection spectroscopy, which has not been used in studying electrochemical …

In Situ Ftir Spectroelectrochemical Study Of Palladium Hexacyanoferrate Thin Film Deposited On Glassy Carbon Electrode, Ai-Li Bo, Xiang-Qin Lin

Journal of Electrochemistry

The electrochemically deposited Palladium hexacyanoferrate thin film on Glassy Carbon electrode (PdHCF|GC) has been studied in HCl, KCl and NaCl solutions by in-situ external reflection FTIR spectroelectrochemical technique. It is found that the behavior of the electroactive PdHCF film can be understood in terms of two states: Pd₂Fe(II)(CN)₆ formed in the inner layer and (M⁺)2Fe(II)(CN)₆ (M⁺: electrolyte cation) formed in the outer layer. The inner layer is oxidized at E_m=0.87 V in 1 mol/L KCl, while for the outer layer Em=0.77 V(vs. Ag/AgCl). In 1 mol/L NaCl or HCl solutions, …

Influence Of Ptfe And Nafion On The Utilization Efficiency Of Pt/C Catalyst In Pemfc, Xiao-Liang Cheng, Bao-Lian Yi, Jing-Xin Zhang, Ming Han, Ya-Guang Qiao

Journal of Electrochemistry

With cycling voltammetry curve(C-V), TEM and SEM photographs, the influence of PTFE and Nafion on the platinum utilization in catalyst layer of PEMFC was investigated. The results show that in gas diffusion electrode, the blocking effect of PTFE in the platinum utilization is not pronunced. In the thin-film catalyst layer, the electron conduct of the catalyst was blocked by the nafion solid and this caused the decrease of platinum utilization. With the increase of the nafion content in the catalyst layer, both platinum utilization and the electron conductivity decreased in the catalyst layer. Because the molecule size of nafion is …

Preparation And Application Of Gold-Film On The Surface Of Bacterial-Modified Carbon Paste Electrode, Rong-Zong Hu, Yan-Ping Ruan, Hao Xu, Jin-Kun Fu, Wei-De Zhang, Wen-Yun Hu

Journal of Electrochemistry

A novel method for preparation of gold-film composed of ultra-fine gold particles was reported in this paper. The gold-film was prepared by electrochemical method on the surface of the paste electrode modified with the strain Bacillus sp. D01 which has strong ability to absorb and reduce Au³⁺. In addition, this paper reported an experimental method of determining trace amount of Cu²⁺ in water solution using cathodic stripping analysis to estimate the performances of the obtained gold-film. The experimental results indicated that this new method for preparation of gold-film is simple. The obtained gold-film electrode is stable and …

Investigation Of Solution Chemistry In Crevice Of Carbon Steel And Its Anodic Polarization Behavior, Zhuo Chen, Cui-Wei Du, Bei Cao, Yin-Shun Wu, Hai Yang, Zheng-Rong Zhang

Journal of Electrochemistry

A self-made wedge-shaped simulated crevice apparatus was designed to investigate the solution chemistry in crevice of carbon steel and its anodic polarization behavior. For carbon steel with 3.5%(wt) NaCl, the change and the distribution of electrode potential, concentration of Cl^- and pH value of solution in the crevice, and the current density of metal in the crevice were measured respectively under various conditions of anodic polarization. The results showed that without polarization the metal about 2 cm away from the opening of the crevice was attacked preferentially because of its lowest free corrosion potential. The anodic polarization promoted the …

The Behaviors Of Capacity Loss Of Limn2O4 Cathodeat Elevated Temperatures, Xiao-Hong Hu, Han-Xi Yang, Xin-Ping Ai, Sheng-Xian Li, Xin-Lin Hong

Journal of Electrochemistry

The capacity loss of spinel LiMn₂O₄ cathode at elevated temperatures was evaluated by constant current charge-discharge methods and it was found that serious capacity loss and cycleability decrease occured at above 50, especially for the charged cells. The mechanisms for this phenomena were examined by atomic emission and infrared spectrometry of the electrolyte, XRD measurment of the cycled elecrode and microelectrode voltammetry of LiMn₂O₄ at room and elevated temperatures. The results showed that with increasing temperature, Mn and Li ions tended to redistribute partly in the spinel framework due to the disproportion of Mn …

Low-Temperature Molecular Beam Epitaxy Of Gaas: A Theoretical Investigation Of Antisite Incorporation And Reflection High-Energy Diffraction Oscillations, K. Natarajan, Rama Venkat, Donald L. Dorsey

Electrical & Computer Engineering Faculty Research

Surface dynamics dominate the incorporation of charged, As+Ga, and neutral, As0Ga, antisite arsenic, and the temporal variation of reflection high-energy electron diffraction(RHEED) intensity in the low-temperature molecular beam epitaxy of (100) gallium arsenide(GaAs). A rate equation model is proposed which includes the presence and dynamics of a physisorbed arsenic (PA) layer riding the growth surface. The PA layer dictates the incorporation and concentration of As+Ga and As0Ga. Additionally, it influences the RHEED oscillations (ROs) behavior and the RO’s dependence on its coverage through its contribution to the reflected intensity. The model results for the dependence of As+Ga and As0Ga concentrations …

Output Control Of Vertical Microcavity Light Emitting Device, James A. Lott

AFIT Patents

An improved intracavity sensor based output power control for microcavity light emitting devices. An improved phototransistor transducer is both configured and physically disposed so that it passively transmits the spurious optical energy output of the microcavity light emitting device while simultaneously generating a light determined electrical signal of easily used large magnitude that is nearly free of error. The base-collector region of the transistor is disposed with a quantum well absorbing layer and produces a signal responsive to a selected emission wavelength. The configuration of the optical energy communicating transducer is arranged so that it is improved in sensitivity and …

Cracking In Cycloaliphatic Epoxy/Aluminum Composite Electrical Bushings, Keith Alan Parker

Doctoral Dissertations

The problem of cracking in electrical apparatus bushings as a result of thermal stresses was investigated. The bushings were composed of cycloaliphatic epoxy insulators with embedded aluminum conductors. The problem is due to the difference in coefficients of thermal expansion of the two materials. A solution to the problem had been to coat the conductors before they were formed together with the epoxy insulators. The coating was assumed to prevent cracking by allowing movement between the two materials as their dimensions changed during thermal expansion and contraction. The contribution of the coating was to be established.

The hypothesis was that …

Preparation And Surface Studies Of Negative Electron Affinity Semiconductors Photocathodes, Khaled A. Elamrawi

Electrical & Computer Engineering Theses & Dissertations

Fabrication of high quantum efficiency, long lifetime negative electron affinity photocathodes is important for applications such as photomultipliers, image intensifiers, electron beam lithography, electron microscopy, and polarized electron sources. The surface cleanliness of the III-V semiconductor photocathode is crucial in obtaining high photosensitivity.

GaAs(100) and InP(100) photocathodes are prepared by atomic hydrogen cleaning. The cleaning effect on the photocathode performance is discussed. The surface degradation mechanisms which reduce the photocathode lifetime are presented. The photocathode surface cleanliness, structure, and morphology are studied using reflection high-energy electron diffraction (RHEED).

Quantum efficiencies of ∼14% and 8% are obtained for GaAs and InP, …

Kinetic Study Of Electrooxidation Of Benzene, Xin-Sheng Zhang, Ping Ding, Ying-Chun Dai, Wei-Kang Yuan

Journal of Electrochemistry

A reaction kinetic study for electrochemical oxidation of benzene was performed on a PbO₂ rotating disk electrode in 1 mol/L H₂SO₄ aqueous solution. The reaction orders, the activation energies and transfer coefficient were measured, and the kinetic expression was obtained.

Synthesis And Application Of Polymeric Corrosion Inhibitor For Reinforced Concrete, Wei-Wei Lin, Sheng-Xian Wang, Jian-Qing Zhang, Jun Yuan, Zhen-Guo Ji

Journal of Electrochemistry

A new polymer E-T was synthesized and used as a corrosion inhibitor for reinforced concrete. The inhibitive behavior and mechanism were studied with linear polarization, Tafel polarization, EIS and XPS method in simulated pore solution system with concrete samples. The result showed that the polymer was a mixing type inhibitor. A 1% dosage was sufficient to imhibit the corrosion of steel in simulated pore solution system. The salt endurance was enhanced from 0.02 mol/L to 0.10 mol/L. The result also showed the good synergetic effect of NaNO₂, especially in low NaNO₂ concentration. The EIS showed that E-T …

Structural And Electrochemical Studies On Todorokite/Vernadite As Cathodes For Rechargeable Lithium Ion Batteries, Wei Chu, De-Yao Liu, Jin-Kua You, Yong Yang, Zu-Geng Lin

Journal of Electrochemistry

XRD, TEM, ICP, low scan-rate CV and charge/discharge tests were carried out for the studies on the structural and electrochemical behavior of a prepared 3 V manganese oxide cathode for rechargeable lithium ion batteries.XRD analysis revealed that the cathode sample is mainly composed of tunneled Todorokite and layered Vernadite. TEM investigation confirmed that the morphology of the sample is a laminated construction with approximate 10nm layer space. The reversibility of Li⁺ removal/intercalation and structural stability of this sample framework to lithium insertion are good in CV and charge/discharge tests. The discharge capacities were found to be about 129mAh/g obtained …

Studies Of Electrochemical Characteristics Of Pasted Nickel Hydroxide Electrode With Surface Deposited Cobalt, Xian-You Wang, Yun-Shi Zhang, Jie Yan, Zheng Zhu, Hua-Tang Yuan, De-Ying Song

Journal of Electrochemistry

The surface of the spherical nickel hydroxide particles used as an active material in pasted nickel electrodes is surface-deposited with cobalt. This paper investigated the effects of the amount of cobalt deposit on the characteristics of nickel hydroxide electrode. The performances of the electrode, such as discharge capacity, utilization of active material and reversibility of Ni(OH)₂/NiOOH redox reaction, were studied by comparing the charging/discharging curves and cyclic voltammograms. The mechanism of action of cobalt deposits has been described in terms of the electrochemical impedance spectroscopy of nickel hydroxide electrode.

A New Cell Structure For Proton Exchange Membrane Fuel Cell, Ming Han, Hong-Feng Xu, Bao-Lian Yi

Journal of Electrochemistry

Separating the functions of current collection and gas flow distribution and then to design two separate elements to achieve the desired performance characteristics, a nonconventional cell structure for proton exchange membrane fuel cells bave been developed. The current collector is achieved using a thin stain steel sheet, the gas flow distribution is achieved using a carbon paper that has the desired chemical durabiliy when in contact with the proton exchange membrane. Combining these two separate elements into a single divice yields a bifunctional device that performs as a bipolar separator plate. The advantages of this alternative appproach to making biplar …

Oxidation Mechanism Of Hypophosphite, Dong-Bai Sun, Ying Jin, Hong-Ying Yu, De-Jun Yang

Journal of Electrochemistry

There exist two oxidation current peaks on the anodic polarization curve between -0.7 V and 0 V (SCE) in Na-hypophosphite solution. Peak Ⅰ (-0.55 V, SCE) , which represents the oxidation process from H₂PO₂^- to H₂PO₃^-, has been studied previously. Peak Ⅱ, which is located at the potential about -0.4 V (SCE), is investigated emphatically in this paper. The results show that, peak Ⅰ and Ⅱ are corresponding to two successive steps in oxidation process of H₂PO₂^-, i.e. peak Ⅱ corresponds to the oxidation process of …

Mössbauer Effect Determination Of Relative Recoilless Fractions For Iron Oxides, Sei J. Oh, Desmond C. Cook

Physics Faculty Publications

The relative recoilless fraction (F-value) of each of six iron oxides, defined as the ratio of the recoil-free fractions of two different materials, was experimentally determined relative to hematite at 300 K and 77 K by Mössbauer spectroscopy. Using the relative recoil-free fractions compared to that of hematite, the relative recoilless fractions between all pairs of the seven iron oxides were determined. The F-values can allow conversion of Mössbauer subspectral areas to the relative atomic, molecular, or weight fractions of each iron oxide present in a mixed oxide phase sample.

Primary Research Of Reversible Proton Exchange Membrane Regenerative Fuel Cells, Zhi-Gang Shao, Bao-Lian Yi, Ming Han

Journal of Electrochemistry

In this paper, we report the results of our studies on regenerative proton exchange membrane fuel cell (RPEMRFC) catalysts, electrode preparation and their performances. The Pt catalyst for the oxygen electrode was replaced by 60 w%Pt + 40 w%IrO₂ which reduces polarization by 0.2 V in a polymer protone exchange membrane fuel cell. The cycle performance of RPEMRFC was found to be manly effected by the stability of the diffiusion layer of bifunctional oxygen electrode.

The Latest World Wide Progress In Solid Oxide Fuel Cell, Yi Jiang

Journal of Electrochemistry

Solid oxide fuel cell (SOFC) is a novel, green electricity generation technology, which has been showing rapid development since 1980's. In light of its high efficiency, environmental friendly, fuel adaptability and long term stability, the Research, Development and Demonstration (RD&D) of this hype of full cell have been emphasized in a large number of developed countries. Based on the information communicated at the latest symposium on SOFC held last year in Aachen (Germany) and the knowledge gained through years of research in this field, a comprehensive review on the latest development of the tubular, this planar SOFC as well as …

A Preliminary Study Of The Synthesis Of Tin-Based Amorphous Material And Its Behavior On Lithium Intercalation, Li Liu, Han-Xi Yang, Ju-Tang Sun, Xing-Ping Ai

Journal of Electrochemistry

An amorphous lithium inserting anode material based on Tin oxide glass was synthesized by salification in solution and its properties on lithium intercalation was investigated by X ray diffraction (XRD), microelectrode voltammetry and charge discharge measurements. The results have shown that this kind of material has considerable electrochemical reversibility toward lithium intercalation deintercalation. The available discharge capacity of the material reaches 430 mAh/g with charge-discharge efficiency over 90%, showing a great potential for practical use.

Studies Of Spinal Li(1+X)Mn(2-X)O4 Rechargeable Lithium Ion Battery, Xiao-Mei Wu, Qing-He Yang, Zhong-Kao Jin, Hao-Qing Wu, Xiang-Fu Zong

Journal of Electrochemistry

The spinel Li intercalation compound Li_1+xMn_2-xO₄ (0< x <1) was prepared by using techniques of cyclic voltammetry. The electrochemical parameters of Li_1+xMn_2-xO₄ electrode vary as either the starting materials or the synthesis temperature changes. It was found that the initial capacity and reversible behaviors of the Li_1+xMn_2-xO₄ electrode depends on the amount of the excess Li, represented as x in Li_1+xMn_2-xO₄. The reversible of Li intercalation process for Li_1+xMn_2-xO₄ electrode was demonstrate by cyclic voltammograms.

Study On Electrosynthesis Of Butyl Butyrate At Conducting Oxide Anode Support On Titanium, Jun-Xiang He, Jin-Cheng Zhou, Kang-Ning Chen

Journal of Electrochemistry

Synthesis of butyl butyrate by direct electroxidation of n butyl alcohol and the electrochemical behaviors of several selected conducting oxide electrodes (Pb/PbO_2, Ti/PbO_2, i/SnO₂+Sb₂O₃/PbO₂ and Ti/SnO₂+Sb₂O₃+PdO_x/PbO₂) have been investigated. The results demonstrated that the intermediate layers of SnO₂, Sb₂O₃ and PdO_x could significantly decrease the interfacial resistance of the electrodes, and that the Ti/SnO₂+Sb₂O₃+PdO_x/PbO₂ electrode possessed better electrocatelytic performance than others.