Materials Science and Engineering Commons^™

Potential Of Lidar And Hyperspectral Sensing For Overcoming Challenges In Current Maritime Ballast Tank Corrosion Inspection, Sergio Pallas Enguita, Jiajun Jiang, Chung-Hao Chen, Samuel Kovacic, Richard Lebel

Electrical & Computer Engineering Faculty Publications

Corrosion in maritime ballast tanks is a major driver of maintenance costs and operational risks for maritime assets. Inspections are hampered by complex geometries, hazardous conditions, and the limitations of conventional methods, particularly visual assessment, which struggles with subjectivity, accessibility, and early detection, especially under coatings. This paper critically examines these challenges and explores the potential of Light Detection and Ranging (LiDAR) and Hyperspectral Imaging (HSI) to form the basis of improved inspection approaches. We discuss LiDAR’s utility for accurate 3D mapping and providing a spatial framework and HSI’s potential for objective material identification and surface characterization based on spectral …

Laser-Induced Graphene For Early Disease Detection: A Review, Sri Ramulu Torati, Gymama Slaughter

Center for Bioelectronics Publications

Electrochemical biosensors have been instrumental in early disease detection, facilitating effective monitoring and treatment. The emergence of graphene has significantly advanced sensor technology in various fields, including biomedicine, electronics, and energy. In this landscape, laser‐induced graphene (LIG) has emerged as a superior alternative to conventional graphene synthesis methods. Its straightforward fabrication process and compatibility with wearable devices boost its practicality and potential for real‐world applications. This review highlights the transformative potential of LIG in biosensing, showcasing its contributions to the development of next‐generation diagnostic tools for early disease detection. An overview of the LIG synthesis process and its applications in …

Electrochemical-Method-Induced Strong Metal-Support Interaction In Pt-Cnt@Sno2 For Co-Tolerant Hydrogen Oxidation Reaction, Shen-Zhou Li, Zi-Jie Lin, Qi-An Chen, Zhao Cai, Qing Li

Journal of Electrochemistry

Inducing the classic strong metal-support interaction (SMSI) is an effective approach to enhance the performance of supported metal catalysts by encapsulating the metal nanoparticles (NPs) with supports. Conventional thermal reduction method for inducing SMSI processes is often accompanied by undesirable structural evolution of metal NPs. In this study, a mild electrochemical method has been developed as a new approach to induce SMSI, using the cable structured core@shell CNT@SnO₂ loaded Pt NPs as a proof of concept. The induced SnO_x encapsulation layer on the surface of Pt NPs can protect Pt NPs from the poisoned of CO impurity in …

Dendrite-Free Strategies For Aqueous Zinc-Ion Batteries: Structure, Electrolyte, And Separator, Gang Wu, Wu-Hai Yang, Yang Yang, Hui-Jun Yang

Journal of Electrochemistry

Continued growth in energy demand and increased environmental pollution constitute major challenges that need to be addressed urgently. The development and utilization of renewable, sustainable, and clean energy sources, such as wind and solar, are crucial. However, the instability of these intermittent energy sources makes the need for energy storage systems increasingly urgent. Aqueous zinc-ion batteries (AZIBs) have received widespread attention due to their unique advantages, such as high energy density, cost-effectiveness, environmental friendliness, and safety. However, AZIBs face significant challenges, mainly the formation of zinc dendrites that seriously affect the stability and lifetime of the batteries, leading to battery …

All-Solid-State Sodium-Ion Batteries: A Leading Contender In The Next-Generation Battery Race, Rui-Jie Zhu, Ze-Chen Li, Wei Zhang, Akira Nasu, Hiroaki Kobayashi, Masaki Matsui

Journal of Electrochemistry

All-solid-state lithium-ion batteries (LIBs) using ceramic electrolytes are considered the ideal form of rechargeable batteries due to their high energy density and safety. However, in the pursuit of all-solid-state LIBs, the issue of lithium resource availability is selectively overlooked. Considering that the amount of lithium required for all-solid-state LIBs is not sustainable with current lithium resources, another system that also offers the dual advantages of high energy density and safety— all-solid-state sodium-ion batteries (SIBs) —holds significant sustainable advantages and is likely to be the strong contender in the competition for developing next-generation high-energy-density batteries. This article briefly introduces the research …

Contributions To Journal Of Electrochemistry, The Flagship Journal Of Chinese Chemical Society Electrochemical Committee, Will Be Listed As A New Recommendation Policy For China Youth Awards Of Electrochemist, Editorial Office Of J.Electrochem.

Journal of Electrochemistry

No abstract provided.

Ge/Sige Quantum Wells: Material For The Post-Moore Era, Troy Alexander Hutchins-Delgado

Optical Science and Engineering ETDs

This dissertation demonstrates high-quality germanium quantum wells on a 200 mm silicon wafer platform, enabling novel device possibilities. Partnering with a commercial silicon-germanium epitaxy supplier, we obtained shallow, undoped germanium quantum wells with high-crystalline quality, confirmed through x-ray diffraction, secondary ion mass spectroscopy, high-resolution scanning transmission electron microscopy, and energy dispersive x-ray spectroscopy. Hall bar devices fabricated on single quantum wells revealed that surface preparation can tune transport properties while maintaining peak mobilities around 10⁵ cm²V⁻¹s⁻¹. Manganese-germanide spintronic contacts were integrated via solid-state reaction, with contact quality assessed through Schottky diodes, transfer length …

Nanostructured Silicon Meta-Waveguides And Surfaces For Enhanced Light-Matter Interaction, Saddam Gafsi

All Dissertations

In this study, we tackle the challenge of light-matter interaction engineering and local field enhancement using various silicon photonic platforms based on three different approaches. (i) The first approach is based on boundary condition engineering where we present and show through simulation and experimental results, a silicon nanodisk “diabolo” configuration able to support significant local field enhancement levels in the range ~102 to 104 in the high index medium through proper structural modifications at the nanoscale. We show that the presented optical behavior is consistent with the anapole modes characterized by the observed near-field enhancement and coinciding with far-field suppression. …

Ellipticity-Controlled Exceptional Points From Nanoscale Metasurfaces, Benjamin Goldberg

McKelvey School of Engineering Graduate Student Theses & Dissertations

Precise control over light polarization is critical for advancing technologies in telecommunica- tions, quantum computing, and image sensing. However, existing methods for manipulating polarization around exceptional points in non-Hermitian systems, have exclusively focused on circular polarization and work with reflected light. To address this limitation, we de- velop a novel metasurface platform with high-Q resonators that enables tunable control of polarization exceptional points across arbitrary ellipticity for transmitted light. Our design uses orthogonally polarized guided mode resonators in a two-layer silicon metasurface, where careful tuning of the dipolar guided mode resonances (DGMRs) and layer spacing allows us to control the …

Ohmic Contacts For Fabrication Of Sic Cmos Devices, Anthony Di Mauro

Graduate Theses and Dissertations

Today’s world of electronics is dominated by semiconductor devices which utilize silicon as their substrate material. Though, silicon is not ideal for semiconductor devices in high-voltage or high-temperature applications. Additionally, the efficiency of silicon devices becomes drastically reduced in nonideal operating conditions. Therefore, finding alternatives to silicon?based devices has been a topic for decades now. A few great candidates to replace silicon devices for said applications include Silicon Carbide (SiC), Gallium Nitride (GaN), and Aluminum Arsenide (AlAs). SiC has grown its reputation as the best candidate, when compared to other potential alternatives, due to its wide bandgap, high operating frequency, …

Investigation Of Conductive Die-Top Thermal Capacitors During Short Circuit Operation Of Silicon Carbide Devices, Youssef Abotaleb

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

Silicon carbide (SiC) power devices have garnered significant attention in recent years due to their superior thermal and electrical properties compared to traditional silicon devices. However, SiC power devices suffer from severe reliability issues arising from their mechanical properties. This is because the Young's modulus of SiC is about three times larger than that of silicon, which correspondingly raises the mechanical stresses acting on the bonding structure, often leading to device failure under power shock events.

Traditional packaging materials and designs tend to constrain SiC performance, as hot-spot temperature resulting from a power shock is one of the key factors …

Aqueous Supercapacitors With Wide Operative Voltage Window And Long Cycling Life Enabled By Electrolyte Hybridization Effect, Shi-Hua Ma, Qi Yin, Jin-Ping Zhao

Journal of Electrochemistry

Developing supercapacitors (SCs) with long cycling life and wide operative voltage window is a significant topic in the field of aqueous electrolytes. Although the design of water in salt (WIS) electrolytes has pushed the development of aqueous electrolytes to a new height, the WIS electrolytes with an operative voltage window of up to 2.5 V is still very scarce. Herein, in order to enrich the type of aqueous electrolyte with high operative voltage, tetramethylammonium trifluoromethanesulfonate (TMAOTf) based WIS electrolyte was used as a model to construct WIS based hybrid electrolyte with acetonitrile (ACN) co-solvent and LiTFSI co-solute. In view of …

The 9th National Conference Of Solid State Battery Successfully Held In Xiamen, Fujian, Zheng-Liang Gong

Journal of Electrochemistry

No abstract provided.

Journal Of Electrochemistry, The Flagship Journal Of Chinese Chemical Society Electrochemical Committee, Made A Public Appearance At The 22nd National Electrochemical Congress, Editorial Office Of J.Electrochem.

Journal of Electrochemistry

No abstract provided.

The Award Ceremony Of The 2nd Xiamen University Short Video Abstract Contest For Science And Technology Journal Papers Came To A Successful Conclusion, Editorial Office Of J.Electrochem.

Journal of Electrochemistry

No abstract provided.

Biocorrosion Analysis Via Multiscale Time Series Analysis, Victor Hugo Mendoza Vejar, Eliseo Hernandez Martinez, Hector Puebla

Annual Symposium on Biomathematics and Ecology Education and Research

No abstract provided.

Refining Chlorosulfonation Methods For The Synthesis Of A Perfluoroalkyl Arylsulfonimide (Pfsi) Monomer, Ainsley P. Foster, Benjamin Varney, Hua Mei

Science University Research Symposium (SURS)

Proton-exchange membrane (PEM) fuel cells are sources of energy that are clean, quiet, and highly responsive to changes in power needs, making them promising for use in automobiles and other portable power devices. The electrolyte of a PEM cell–the layer responsible for conductivity–is a polymer membrane, commonly consisting of perfluoroalkyl sulfonic acid (PFSA) polymers. Perfluoroalkyl arylsulfonimide (PFSI) polymers are expected to improve the efficiency of PEM fuel cells through optimal stability and proton conductivity. The trifluovinylether (TFVE) aryl perfluorosulfonamide monomer is a new PFSI monomer proposed to fulfill these benefits once polymerized. A six-step synthesis route was initially designed to …

The Adviser Of Journal Of Electrochemistry Professor Christian Amatore Received The Chinese Government Friendship Award, Editorial Office Of J.Electrochem.

Journal of Electrochemistry

No abstract provided.

Goodbye With Tears! Deep Condolences To Academician Zhao-Wu Tian!, Editorial Office Of J.Electrochem.

Journal of Electrochemistry

No abstract provided.

Journal Of Electrochemistry Is Selected To Entering Ici Journals Master List, Editorial Office Of J.Electrochem.

Journal of Electrochemistry

No abstract provided.

Electronic Communication Between Co And Ru Sites Decorated On Nitrogen-Doped Carbon Nanotubes Boost The Alkaline Hydrogen Evolution Reaction, Meng-Ting Gao, Ying Wei, Xue-Meng Hu, Wenj-Jie Zhu, Qing-Qing Liu, Jin-Yuan Qiang, Wan-Wan Liu, Ying Wang, Xu Li, Jian-Feng Huang, Yong-Qiang Feng

Journal of Electrochemistry

Designing highly efficient Pt-free electrocatalysts with low overpotential for an alkaline hydrogen evolution reaction (HER) remains a significant challenge. Here, a novel and efficient cobalt (Co), ruthenium (Ru) bimetallic electrocatalyst composed of CoRu nanoalloy decorated on the N-doped carbon nanotubes (CoRu@N-CNTs), was prepared by reacting fullerenol with melamine via hydrothermal treatment and followed by pyrolysis. Benefiting from the electronic communication between Co and Ru sites, the as-obtained CoRu@N-CNTs catalyst exhibited superior electrocatalytic HER activity. To deliver a current density of 10 mA·cm^–2, it required an overpotential of merely 19 mV along with a Tafel slope of 26.19 mV·dec …

Zhong-Qun Tian, Academician And Honorary Member Of Electrochemistry Committee Chinese Chemical Society, Achieved "Raman Lifetime Award", Editorial Office Of J.Electrochem.

Journal of Electrochemistry

No abstract provided.

Optimization Of Channel Structure Of Alkaline Water Electrolyzer By Using An Expanded Mesh As A Bipolar Plate, Hai-Yan Xiong, Zhen-Xiao Zhu, Xin Gao, Chen-Ming Fan, Hui-Bao Luan, Bing Li

Journal of Electrochemistry

Alkaline water electrolysis (AWE) is the most mature technology for hydrogen production by water electrolysis. Alkaline water electrolyzer consists of multiple electrolysis cells, and a single cell consists of a diaphragm, electrodes, bipolar plates and end plates, etc. The existing industrial bipolar plate channel is concave-convex structure, which is manufactured by complicated and high-cost mold punching. This structure still results in uneven electrolyte flow and low current density in the electrolytic cell, further increasing in energy consumption and cost of AWE. Thereby, in this article, the electrochemical and flow model is firstly constructed, based on the existing industrial concave and …

Chinese Chemical Society: First Young Scholars' Symposium On Electrosynthesis Held Successfully, Chinese Society Of Electrochemistry (Cse)

Journal of Electrochemistry

No abstract provided.

2024 Tianmulake Advanced Anode Materials Innovation Forum And Sixth National Conference Of Advanced Battery Failure Analysis And Testing Technology Concluded Successfully, Editorial Office Of J.Electrochem.

Journal of Electrochemistry

No abstract provided.

Aging Characteristics Of Lithium-Ion Battery Under Fast Charging Based On Electrochemical-Thermal-Mechanical Coupling Model, Dong-Xu Zuo, Pei-Chao Li

Journal of Electrochemistry

The aging characteristics of lithium-ion battery (LIB) under fast charging is investigated based on an electrochemical-thermal-mechanical (ETM) coupling model. Firstly, the ETM coupling model is established by COMSOL Multiphysics. Subsequently, a long cycle test was conducted to explore the aging characteristics of LIB. Specifically, the effects of charging (C) rate and cycle number on battery aging are analyzed in terms of nonuniform distribution of solid electrolyte interface (SEI), SEI formation, thermal stability and stress characteristics. The results indicate that the increases in C rate and cycling led to an increase in the degree of nonuniform distribution of SEI, and thus …

Recent Advances On Ruthenium-Based Electrocatalysts For Lithium-Oxygen Batteries, Yu-Zhe Wang, Zhuo-Liang Jiang, Bo Wen, Yao-Hui Huang, Fu-Jun Li

Journal of Electrochemistry

Rechargeable lithium-oxygen (Li-O₂) batteries have attracted wide attention due to their high energy density. However, the sluggish cathode kinetics results in high overvoltage and poor cycling performance. Ruthenium (Ru)-based electrocatalysts have been demonstrated to be promising cathode catalysts to promote oxygen evolution reaction (OER). It facilitates decomposition of lithium peroxide (Li₂O₂) by adjusting Li₂O₂ morphologies, which is due to the strong interaction between Ru-based catalyst and superoxide anion (O₂^–) intermediate. In this review, the design strategies of Ru-based electrocatalysts are introduced to enhance their OER catalytic kinetics in …

Numerical Analysis Of Explosion Characteristics Of Vent Gas From 18650 Lifepo4 Batteries With Different States Of Charge, Shi-Lin Wang, Xu Gong, Li-Na Liu, Yi-Tong Li, Chen-Yu Zhang, Le-Jun Xu, Xu-Ning Feng, Huai-Bin Wang

Journal of Electrochemistry

The combustion and explosion characteristics of lithium-ion battery vent gas is a key factor in determining the fire hazard of lithium-ion batteries. Investigating the combustion and explosion hazards of lithium-ion batteries vent gas can provide guidance for rescue and protection in explosion accidents in energy storage stations and new energy vehicles, thereby promoting the application and development of lithium-ion batteries. Based on this understanding and combined with previous research on gas production from lithium-ion batteries, this article conducted a study on the combustion and explosion risks of vent gas from thermal runaway of 18650 LFP batteries with different states of …

2024 "Electrochemical Research Paradigms" Summer School Successfully Held, Editorial Office Of J.Electrochem.

Journal of Electrochemistry

No abstract provided.

Upcoming Meeting-The 1St Young Investigator Symposium On Electrosynthesis, Chinese Chemical Society, Chinese Society Of Electrochemistry (Cse)

Journal of Electrochemistry

No abstract provided.