Open Access. Powered by Scholars. Published by Universities.®

Materials Science and Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Civil and Environmental Engineering

Institution
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 211 - 240 of 2196

Full-Text Articles in Materials Science and Engineering

Microstructure Densification In Cement Pastes Enabled By Novel Graphene Types, Sahil Surehali, Taihao Han, Ranjith Divigalpitiya, Aditya Kumar, Narayanan Neithalath Sep 2025

Microstructure Densification In Cement Pastes Enabled By Novel Graphene Types, Sahil Surehali, Taihao Han, Ranjith Divigalpitiya, Aditya Kumar, Narayanan Neithalath

Materials Science and Engineering Faculty Research & Creative Works

The primary barriers hindering graphene's widespread adoption as a performance-enhancing additive in cement-based systems have traditionally been its prohibitive cost and the sustainability concerns associated with conventional manufacturing processes. However, these impediments have recently been mitigated by advancements in detonation synthesis techniques, enabling scalable, cost-effective, and environmentally favorable production of novel graphene types—specifically fractal graphene (FG) and reactive graphene (RG). This paper explores the influence of ultra-low dosages of FG and RG (≤ 0.04 % by mass of cement, which results in ∼20 % increase in compressive strengths) on the pore-structure features of cement pastes. Compared to the control paste, …

Go to article

Nonlinear Analytical Models Of The Seismically Isolated ``Frame-Boiler'' System With Cantilever-Type Hysteresis Dampers, Aleksandr Mikhailovich Anushchenko, Dmitrii Evgenievich Bondarev, Aleksandr Yurievich Schukin Sep 2025

Nonlinear Analytical Models Of The Seismically Isolated ``Frame-Boiler'' System With Cantilever-Type Hysteresis Dampers, Aleksandr Mikhailovich Anushchenko, Dmitrii Evgenievich Bondarev, Aleksandr Yurievich Schukin

Journal of Sustainable Construction Materials and Technologies

This study shows results of development of the ``frame-boiler'' system with hysteresis dampers analytical model. Hysteresis dampers are used as boiler antiseismic bracing. It is noted that simplified analytical models are necessary at the stage of preliminary iterative calculations, when a CAE-modeling is impractical due to significant time costs. The authors have proposed 2 options of analytical models: 2-mass model and 3-mass model. The differential equations of motion for each model are written below. The results of the calculation for seismic impacts are compared with the finite element model. It is shown that 3-mass model gives good match of results …

Go to article

Advancing Sustainable Structural Solutions: Hemp Fiber-Reinforced Polymer (Hfrp) Reinforcement Bars For Concrete Applications Through Material Selection, Simulation, And Pathways For Future Development, Thomas Cadenazzi, Busra Keles Sep 2025

Advancing Sustainable Structural Solutions: Hemp Fiber-Reinforced Polymer (Hfrp) Reinforcement Bars For Concrete Applications Through Material Selection, Simulation, And Pathways For Future Development, Thomas Cadenazzi, Busra Keles

Journal of Sustainable Construction Materials and Technologies

This paper investigates innovative Hemp Fiber-Reinforced Polymer (HFRP) rebars as a sustainable alternative to conventional Carbon Steel (CS) and Glass Fiber-Reinforced Polymer (GFRP) rebars used as reinforcement in concrete structures. The feasibility of HFRP rebars is assessed, focusing on mechanical properties and sustainability advantages. A virtual tensile test on a modeled M19 HFRP rebar, conducted using Autodesk's Fusion 360, demonstrates tensile strength comparable to CS 235 and greater environmental sustainability than GFRP, despite a slight reduction in stiffness. The study also considers the potential of graphene fiber integration to enhance mechanical properties, underscoring HFRP's adaptability. Findings suggest that HFRP rebars, …

Go to article

Comparative Analysis Of Life Cycle Assessment Of Traditional And Contemporary Timber Buildings, Sadık Akşar, Gökçe Tuna Sep 2025

Comparative Analysis Of Life Cycle Assessment Of Traditional And Contemporary Timber Buildings, Sadık Akşar, Gökçe Tuna

Journal of Sustainable Construction Materials and Technologies

Wood has long been used as a primary building material, but with the Industrial Revolution and the spread of multi-story structures, its structural limitations became evident. In the 21st century, engineered timber products have reintroduced wood as a sustainable alternative, offering advantages such as lightness, rapid assembly, and recyclability. At the same time, buildings are responsible for significant environmental impacts, making assessment methods essential. Life Cycle Assessment (LCA) is one of the most widely used tools for evaluating these impacts across all stages of a building’s life cycle. This study applies LCA to timber construction systems, focusing on both traditional …

Go to article

Sustainable Paving Block Development: Utilizing Rejected Coal As Filler And Assessing Its Impact On Paving Block’S Properties, Siti Nikmatin, Allen Kurniawan, Heriansyah Putra, Rima Fitria Adiati, Riawan Ma’Ruf, Dwi Arso Yedi Irwanto Sep 2025

Sustainable Paving Block Development: Utilizing Rejected Coal As Filler And Assessing Its Impact On Paving Block’S Properties, Siti Nikmatin, Allen Kurniawan, Heriansyah Putra, Rima Fitria Adiati, Riawan Ma’Ruf, Dwi Arso Yedi Irwanto

Journal of Sustainable Construction Materials and Technologies

This study investigated the potential use of rejected coal as a fine aggregate filler in paving block production. Comprehensive characterization of the rejected coal was conducted, including toxicity, physical, chemical, and mineralogical analyses of the coal. The results showed that the rejected coal met environmental safety standards (TCLP) and had suitable properties as an aggregate. Paving blocks were produced by incorporating different proportions of rejected coal fillers and were tested for compressive strength, water absorption, and density. The optimal mix with 35% rejected coal filler as a replacement of stone ash achieved a compressive strength of 14.61 MPa, water absorption …

Go to article

Numerical Comparative Study Of The Thermal Performance And Load-Bearing Capacity Of Hollow Clay Bricks Used In Construction In Libya, Osama Lawej, Mahmoud Ahmed, Ismael Ehtiwesh Sep 2025

Numerical Comparative Study Of The Thermal Performance And Load-Bearing Capacity Of Hollow Clay Bricks Used In Construction In Libya, Osama Lawej, Mahmoud Ahmed, Ismael Ehtiwesh

Journal of Sustainable Construction Materials and Technologies

The optimization of structural and thermal performance in building components is a key challenge in sustainable construction, particularly in hot climate regions like Libya. Hollow clay bricks are widely used due to their local availability and affordability; however, their internal geometry is often not optimized for thermal resistance or mechanical integrity. This study addresses this gap by numerically investigating the effect of cavity geometry on the load-bearing capacity and thermal insulation performance of hollow clay bricks. Three configurations were analyzed, including two commercial designs from the Libyan market and a newly proposed arched cavity design. Finite Element Method (FEM) simulations …

Go to article

Developing A Modular Circular Wall Over-Clad System For Facade Thermal Upgrade In Deep Energy Retrofit, Patrick Daly Sep 2025

Developing A Modular Circular Wall Over-Clad System For Facade Thermal Upgrade In Deep Energy Retrofit, Patrick Daly

Journal of Sustainable Construction Materials and Technologies

The EU has implemented several policy and legislative initiatives aimed at decarbonisation and circularity transition of the Built Environment including a strategy for large scale renovation of the building / housing stock. Modularised construction solutions are argued to be a potential acceleration pathway toward this objective. Yet there remains issues and challenges in implementing such strategies in a complex and heterogeneous stock and sector. This research investigates this decarbonisation pathway, examining the feasibility and potential of applying a modularised construction over-clad system, based on advanced circularity, in the deep energy retrofit of social housing. The research is based on a …

Go to article

Enabling Carbon Dioxide Mineralization And Active Set Control In Portlandite-Based Cementitious Suspensions, Xiaodi Dai, Sharu Bhagavathi Kandy, Rui Xiao, Manas Sarkar, Shubham Wani, Thiyagarajan Ranganathan, Narayanan Neithalath, Aditya Kumar, Mathieu Bauchy, Edward Garboczi, Torben Gädt, Samanvaya Srivastava, Gaurav Sant Sep 2025

Enabling Carbon Dioxide Mineralization And Active Set Control In Portlandite-Based Cementitious Suspensions, Xiaodi Dai, Sharu Bhagavathi Kandy, Rui Xiao, Manas Sarkar, Shubham Wani, Thiyagarajan Ranganathan, Narayanan Neithalath, Aditya Kumar, Mathieu Bauchy, Edward Garboczi, Torben Gädt, Samanvaya Srivastava, Gaurav Sant

Materials Science and Engineering Faculty Research & Creative Works

The real-time control of concrete's stiffening allows users to better control pumping and extrusion during 3D-printing processes. Here, a portlandite-based cementitious formulation (i.e., slurry or suspension) that features the potential for rapid CO2 uptake is adapted for 3D-printing applications. In particular, we showcase a portlandite-fly ash binder system combined with a thermo responsive polymer, wherein precise control via thermal activation allows set control and rapid solidification. Through the thermally induced polymerization of polyacrylamide, the hybrid binder system rapidly undergoes stiffening at trigger onset temperatures ranging from 60 °C to 80 °C, exhibiting average stiffening rates of up to 2600 …

Go to article

Synergetic Adsorptive Mechanisms, Reusability And Cost Evaluations Of Green Fabricated Hybrid Barium Cobalt Nanocomposites For Methylene Blue And Lead Removal From Wastewater, Titus Chinedu Egbosiuba, Chibuike Christogonus Njoku, Ijeoma Jacinta Ani, Godwin Ifeanyi Ogbuehi, Abdulkareem Omeiza Yusuf, Abiodun Azeez Saka, Ugochukwu Ewuzie, Ebuka Emmanuel Ezennajiego, Blessing Onyinye Okafor, Walter Chibuike Anene, Cecilia Chika Unegbu, Florence Acha, Monday Uchenna Okoronkwo Sep 2025

Synergetic Adsorptive Mechanisms, Reusability And Cost Evaluations Of Green Fabricated Hybrid Barium Cobalt Nanocomposites For Methylene Blue And Lead Removal From Wastewater, Titus Chinedu Egbosiuba, Chibuike Christogonus Njoku, Ijeoma Jacinta Ani, Godwin Ifeanyi Ogbuehi, Abdulkareem Omeiza Yusuf, Abiodun Azeez Saka, Ugochukwu Ewuzie, Ebuka Emmanuel Ezennajiego, Blessing Onyinye Okafor, Walter Chibuike Anene, Cecilia Chika Unegbu, Florence Acha, Monday Uchenna Okoronkwo

Chemical and Biochemical Engineering Faculty Research & Creative Works

Barium nanoparticles (BaNPs), cobalt nanoparticles (CoNPs), and hybrid barium-cobalt nanocomposites (BaCoNCs) were synthesized using an eco-friendly green technique with Anacardium occidentale leaf extract for sequestration of methylene blue (MB) dye and lead (Pb (II)) ions from industrial wastewater. The nanoparticles and nanocomposites were characterized using Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), high-resolution scanning electron microscopy (HRSEM), and Brunauer-Emmett-Teller (BET) analysis to assess their functional groups, crystalline structure, morphology, and surface properties, confirming successful synthesis. Batch adsorption studies showed that optimal pollutant removal occurred at pH values of 8 for MB and 5 for Pb(II), with a contact time …

Go to article

Ceramic Waste As Sustainable Material In Self-Compacting Concrete: Experimental Study And Ann Predictive Modeling, Abderrezak Bouziane, Houssam Slimanou, Mohamed Amin Bouzidi, Nedjima Bouzidi Aug 2025

Ceramic Waste As Sustainable Material In Self-Compacting Concrete: Experimental Study And Ann Predictive Modeling, Abderrezak Bouziane, Houssam Slimanou, Mohamed Amin Bouzidi, Nedjima Bouzidi

Journal of Sustainable Construction Materials and Technologies

Recycling of ceramic waste in the construction sector is a promising option for reducing the environmental impacts of the concrete industry. The main objective of this study is the elaboration of a solid predictive model for ceramic waste based self-compacting (SCC) concrete properties, using artificial neural networks (ANN). This further, reduces its environmental impact without compromising satisfactory performance. An experimental approach was adopted with different substitution ratios: 0 to 30 wt% and particle sizes ranging from 3-8 mm and 8-15 mm. Tested properties of modified SCC as compressive strength at 7 and 28 days (fc7, fc28), spread (L), sieve stability …

Go to article

Comparative Study On The Performance Of Ggbs, Uggbs, And Rha-Incorporated Cement Mortar Mixes, Devansh Goel, Sudarshan D. Kore Aug 2025

Comparative Study On The Performance Of Ggbs, Uggbs, And Rha-Incorporated Cement Mortar Mixes, Devansh Goel, Sudarshan D. Kore

Journal of Sustainable Construction Materials and Technologies

The environmental footprint of cement production has accelerated the pursuit of sustainable alternatives in the construction industry. Supplementary cementitious materials (SCMs), particularly those derived from industrial and agricultural waste, offer a promising approach to reducing cement consumption while maintaining performance. This study evaluates the fresh and mechanical behavior of binary, ternary, and quaternary cementitious mortar blends incorporating ground granulated blast-furnace slag (GGBS), ultrafine GGBS (UGGBS), and rice husk ash (RHA) as partial replacements for cement. A total of 32 mortar mixes were designed with water-to-binder (w/b) ratios ranging from 0.3 to 0.5 and varied replacement levels of RHA (0-20%), GGBS …

Go to article

Effects Of Eogo In Metakaolin-Based Geopolymer, Chaewon Lee, Hoyoung Lee, Jinwoo An, Boo Hyun Nam Aug 2025

Effects Of Eogo In Metakaolin-Based Geopolymer, Chaewon Lee, Hoyoung Lee, Jinwoo An, Boo Hyun Nam

Civil Engineering Faculty Publications

Geopolymer concrete uses a geopolymer binder instead of traditional Portland cement; thus, it reduces carbon emissions by a significant amount. In this study, Edge-Oxidized Graphene Oxide (EOGO), a carbon-based nanomaterial, was added into a metakaolin-based geopolymer, and its effect on the mechanical and rheological properties of the mixture was investigated. EOGO was added into the mixture at 0% (control), 0.1%, 0.5%, and 1% of the metakaolin mass. Several experiments were conducted to characterize the properties of the metakaolin–EOGO (MKGO) geopolymer, including its compressive strength, free–free resonance column (FFRC), void content, water absorption, setting time, flow, and rheology. It was found …

Go to article

A Review On Connection Forms Between Bridge Guardrails And Bridge Decks, Li Wei, Li Rutao, Jia Ning, Lu Jian Aug 2025

A Review On Connection Forms Between Bridge Guardrails And Bridge Decks, Li Wei, Li Rutao, Jia Ning, Lu Jian

Journal of China & Foreign Highway

In recent years,with the continuous expansion of highway bridge construction in China,there has been a growing public demand to enhance road safety and the protective capabilities of highway bridges.To meet the engineering application requirements of various bridge forms and bridge guardrails,diverse connection structures between bridge guardrails and bridge decks have been studied both domestically and internationally.However,in current engineering practice,the selection of these connection forms remains challenging,lacking clear reference criteria.Using the analytic hierarchy process and supported by experimental data,this paper comprehensively analyzed the advantages and disadvantages of these connection forms by considering factors such as guardrail protection effectiveness,load-bearing reliability,construction convenience,and ease …

Go to article

Effect Of Granite Machine-Made Sand Properties On Concrete Performance, Wang Jiliang, Wei Xinyuan, Yu Bo Aug 2025

Effect Of Granite Machine-Made Sand Properties On Concrete Performance, Wang Jiliang, Wei Xinyuan, Yu Bo

Journal of China & Foreign Highway

As an important stone resource in China,granite is widely used in the preparation of machine-made sand and other building materials due to its stable physical properties and favorable mechanical performance.In order to promote the better application of granite in machine-made sand for cement concrete,this paper analyzed the mineral composition,particle grading,and mica content of granite machine-made sand.It systematically summarized the influence of these characteristics on the mechanical properties,durability,and volumetric stability of concrete.The results show that the concrete performance declines with increasing mica and stone powder content in granite machine-made sand.Properly limiting their content can improve the mechanical properties and durability of …

Go to article

Wind Tunnel Test Study On Vortex-Induced Vibration Performance Of Cable-Stayed Bridge With Double-Side Box Open Section Composite Main Girder, Zhou Guohua, Du Guoqiang, Pei Shan, Ding Wangxing, Zhu Zhiwen Aug 2025

Wind Tunnel Test Study On Vortex-Induced Vibration Performance Of Cable-Stayed Bridge With Double-Side Box Open Section Composite Main Girder, Zhou Guohua, Du Guoqiang, Pei Shan, Ding Wangxing, Zhu Zhiwen

Journal of China & Foreign Highway

In order to evaluate the vortex-induced vibration (VIV ) performance of a single-tower ground-anchored cable-stayed bridge with a double-side box open section composite main girder,sectional model wind tunnel tests were conducted under different wind angles of attack and wind speeds.The results show that the torsional stiffness of the π-shaped open section main girder is significantly higher than its vertical bending stiffness.The dominant vibration mode of the main girder is the obvious vibration of the main span,while the ground-anchored abutment effectively stabilizes the cable tower through the back stays.At the damping ratio level specified in the code,within the range of prevailing …

Go to article

Research On Crack Identification Technology Based On Sobel + Matched Filter Joint Algorithm, Wen Yan, Guo Xiaoqian, Tang Youzhi, Yang Enhui, Qiu Yanjun Aug 2025

Research On Crack Identification Technology Based On Sobel + Matched Filter Joint Algorithm, Wen Yan, Guo Xiaoqian, Tang Youzhi, Yang Enhui, Qiu Yanjun

Journal of China & Foreign Highway

To address the problems of hollow recognition results,high noise,and poor crack continuity in pavement crack identification using the Sobel algorithm,this paper proposed a joint algorithm combining the Sobel algorithm and matched filter for three-dimensional crack recognition of asphalt pavement.A matched filter in the form of a sine function was designed,and the matched filter was used to extract crack features from the results of the Sobel algorithm.The matched filter results were subjected to threshold filtering and connected domain analysis to effectively solve the hollow recognition problem,while also reducing noise and improving crack continuity.The test results show that the Sobel + matched …

Go to article

Research On Prefabrication Scheme Of Concrete Barrier Based On Anchorage In Cast-In-Situ Layer, Liang Xiaochong, Kang Hanjing, Luo Yongchuan, Wen Zhiquan, Deng Bao Aug 2025

Research On Prefabrication Scheme Of Concrete Barrier Based On Anchorage In Cast-In-Situ Layer, Liang Xiaochong, Kang Hanjing, Luo Yongchuan, Wen Zhiquan, Deng Bao

Journal of China & Foreign Highway

In order to improve the on-site construction efficiency of bridge concrete barriers,a prefabrication scheme for bridge concrete barrier installation was proposed.A structure scheme was developed by anchoring transverse steel bars at the bottom of prefabricated wall panels into the integrated cast-in-situ layer,adopting tongue-and-groove connections between adjacent wall panels,and optimizing the structural configuration and reinforcement of the panels.According to the requirements of the Level VI protection standard,full-scale impact tests using a large bus and a large truck were organized in turn.The results show that the prefabricated concrete bridge barrier can effectively withstand continuous impacts from both large buses and trucks.Its structural …

Go to article

Application Of Grouted Steel Pipe Micropile Composite Structure In Highway Landslide Treatment, Wu Bing, Liang Yao, Li Jie, Zhao Honghu Aug 2025

Application Of Grouted Steel Pipe Micropile Composite Structure In Highway Landslide Treatment, Wu Bing, Liang Yao, Li Jie, Zhao Honghu

Journal of China & Foreign Highway

To optimize the calculation methods and application schemes for reinforcing landslides using grouted steel pipe micropile composite structures,the composition of single-pile composite structures and the combination forms of pile group structures were described.By taking the Bishop method as an example,a stability analysis method and the anti-sliding principle of side (sliding ) slopes reinforced with grouted steel pipe micropile composite structures were proposed,and a calculation formula for the allowable shear resistance of the composite pile was derived.By taking a landslide case from a section of Lijiang‒Panzhihua Expressway as an example,landslide stability analysis and landslide thrust calculation were carried out.The grouted steel …

Go to article

Settlement Calculation Method For Composite Foundations Reinforced With Geo-Encased Stone Columns, Long Jun, Tan Jingpeng Aug 2025

Settlement Calculation Method For Composite Foundations Reinforced With Geo-Encased Stone Columns, Long Jun, Tan Jingpeng

Journal of China & Foreign Highway

Geo-encased stone columns (GESCs ),known for their cost-effectiveness and simple construction,are widely employed in the reinforcement of soft soil foundations in practical engineering,and the analysis of their settlement serves as a crucial foundation for the design process.However,existing research mainly focuses on experimental and numerical methods,with relatively limited progress in theoretical calculations.Based on the load transfer mechanism of GESC-reinforced composite foundations and the bulging deformation of the pile body within a certain depth of the pile top under vertical loading,the reinforced zone was divided into a bulging section and a non-bulging section,and the total settlement of the pile was regarded as …

Go to article

Study On Deformation Characteristics Induced By Deep Foundation Pit Excavation Sharing Diaphragm Wall With Existing Subway Station, Ling Tonghua, Zou Nanwei, Zhou Kun, Feng Wei, Wu Xing, Zhang Liang Aug 2025

Study On Deformation Characteristics Induced By Deep Foundation Pit Excavation Sharing Diaphragm Wall With Existing Subway Station, Ling Tonghua, Zou Nanwei, Zhou Kun, Feng Wei, Wu Xing, Zhang Liang

Journal of China & Foreign Highway

To investigate the deformation induced by deep foundation pit excavation sharing a diaphragm wall with an existing subway station,this study took the foundation pit project of Gongming Square Station of Shenzhen Metro as an example.A three-dimensional numerical model was established by FLAC3D software to analyze the deformation characteristics of the surrounding ground surface,retaining structures,and the subway station during the excavation process.In addition,field monitoring was conducted to measure the vertical and horizontal displacements of the pit sidewall and the subway station sharing the diaphragm wall.The results show that after excavation,the ground surface settlement behind the retaining wall exhibits an approximately elliptical …

Go to article

Study On Chloride Ion Diffusion Behavior In Cracked Cement Mortar With High Fly Ash Content, Liu Yang, Mao Shengzhe, Lu Naiwei Aug 2025

Study On Chloride Ion Diffusion Behavior In Cracked Cement Mortar With High Fly Ash Content, Liu Yang, Mao Shengzhe, Lu Naiwei

Journal of China & Foreign Highway

In order to explore the diffusion behavior of chloride ions in cracked cement mortar with high fly ash (FA) content,this study fabricated cement mortar specimens with different FA contents and crack widths by artificially prefabricating cracks.The chloride ion content in cracks was measured after natural soaking for 30 days and 60 days.The results show that the cracks accelerate the diffusion of chloride ions in cement mortar.The increase in the diffusion coefficient caused by 0.05 mm and 0.1 mm cracks is similar,while that caused by a 0.2 mm crack is significantly higher.After 30 days of soaking,the chloride ion content of the …

Go to article

Relationship Between Fractal Characteristics And Shear Strength Of Highway Spoil Site Materials, Luo Shixin, Luo Hongming, Zou Fei, Cai Lei Aug 2025

Relationship Between Fractal Characteristics And Shear Strength Of Highway Spoil Site Materials, Luo Shixin, Luo Hongming, Zou Fei, Cai Lei

Journal of China & Foreign Highway

Highway spoil features a wide range of particle sizes and poor gradation,and their strength characteristics serve as key factors affecting the stability of spoil slopes.To explore the relationship between fractal characteristics of particle size and strength,this study examined 21 spoil sites along the Guizhou section of the Duyun ‒ Shangri-La Expressway.Based on the field investigation,particle size analysis tests,and laboratory shear tests,the particle composition and shear strength parameters of spoil were obtained.Based on fractal theory,the fractal characteristics of particle size under different gradation scaling methods were analyzed,and the relationship between shear strength parameters and the fractal dimensions of particle size was …

Go to article

Research On Improvement Of Adhesive Properties Of Asphalt And Granite Gravel, Li Yu, Zhang Yingxue, Qiu Chao, Wang Mo, Liu Li Aug 2025

Research On Improvement Of Adhesive Properties Of Asphalt And Granite Gravel, Li Yu, Zhang Yingxue, Qiu Chao, Wang Mo, Liu Li

Journal of China & Foreign Highway

In view of the poor adhesion of acidic granite gravel and asphalt and the shortage of alkaline stone in asphalt pavement in China ’s expressway construction,this study evaluated the improvement effects of schemes,including single use of amine anti-stripping agent DRD-K 1,single use of non-amine anti-stripping agent AMR- 3,single use of cement,and combined use of anti-stripping agent and cement,on the asphalt-aggregate adhesion properties.Through the tests of three major indexes before and after asphalt aging,aggregate adhesion test,and improved water immersion method,the adhesion of asphalt was evaluated,and the optimal amount for use was proposed.The results show that the non-amine anti-stripping agent AMR- 3 …

Go to article

Factors Influencing Fatigue Damage In Manufactured Sand-Based Ecological Self-Compacting Concrete Pavement, Fu Suanzi, Li Hongyan Aug 2025

Factors Influencing Fatigue Damage In Manufactured Sand-Based Ecological Self-Compacting Concrete Pavement, Fu Suanzi, Li Hongyan

Journal of China & Foreign Highway

Ecological-self-compacting concrete (Eco-SCC ) pavements offer advantages such as reduced cement consumption,lower carbon emissions,and improved economic performance.However,their durability has not been sufficiently studied.Based on the literature review and fatigue test data,the fatigue parameters of Eco-SCC were determined using the Chaboche damage evolution model.A finite element model of fatigue damage in Eco-SCC pavement structures was established to compare the fatigue damage distribution under different loading positions,identify the unfavorable loading positions,and analyze the influence of slab thickness and modulus on the durability of Eco-SCC pavements.SCC plate thickness and modulus on the durability of Eco-SCC pavement.The results show that fatigue damage under different …

Go to article

Adhesion Mechanism Of Geopolymer-Modified Emulsified Asphalt Slurry At Interface With Aggregate, Zhong Chao, Yang Hao, Lin Juntao, Xiao Yue Aug 2025

Adhesion Mechanism Of Geopolymer-Modified Emulsified Asphalt Slurry At Interface With Aggregate, Zhong Chao, Yang Hao, Lin Juntao, Xiao Yue

Journal of China & Foreign Highway

In order to investigate the adhesion mechanism at the interface between geopolymer-modified emulsified asphalt slurry and aggregate,the interfacial adhesion performance was studied by the molecular dynamics method and compared with that of cement-modified emulsified asphalt slurry.In addition,macro-scale splitting strength tests were performed for verification.The results indicate that van der Waals forces play a major role in the adhesion at the slurry-aggregate interface.Under equivalent mix ratios,the interfacial binding energy between the geopolymer-modified emulsified asphalt slurry and aggregate is 6.84% ‒19.99% higher than that of the cement system.The adhesion performance is closely related to the diffusion properties and atomic distribution of the …

Go to article

Experimental Study On Workability Of Alkali-Activated Red Mud-Based Controlled Low-Strength Materials, Wu Yun, Fang Mingjing², Lin Zhiyang², Liu Zhengwei³, Beng Jianping³ Aug 2025

Experimental Study On Workability Of Alkali-Activated Red Mud-Based Controlled Low-Strength Materials, Wu Yun, Fang Mingjing², Lin Zhiyang², Liu Zhengwei³, Beng Jianping³

Journal of China & Foreign Highway

This study aims to optimize the mix design of alkali-activated red mud-based controlled low-strength materials (CLSMs ) to enhance their applicability in road engineering backfilling.The effects of red mud content (20% ‒ 50%),water-to-solid ratio (0.30‒0.36),sand-to-soil ratio (7∶3‒4∶6),polycarboxylate superplasticizer (PEC ) dosage (0%‒2.1%),and fly ash to mineral powder ratio (5∶1‒0.5∶1) on the flowability and bleeding resistance of the materials were systematically investigated.The results are as follows:① The water-to-solid ratio significantly influences flowability.Increasing it to 0.32‒0.34 improves flowability by 39%‒78%,but when the ratio exceeds 0.34,the bleeding rate increases significantly (up to 4.89%);② When the red mud content is 30%‒40%,the high specific surface …

Go to article

Damage Localization Of Simp Ly Supported Beams Based On Deflection Influence Surfaces Calculated By Three-Dimensional Boundary Face Method, Yin Xinfeng, Luo Zonghao, Yan Wanli, Kaiersaer ∙Tuerdi Aug 2025

Damage Localization Of Simp Ly Supported Beams Based On Deflection Influence Surfaces Calculated By Three-Dimensional Boundary Face Method, Yin Xinfeng, Luo Zonghao, Yan Wanli, Kaiersaer ∙Tuerdi

Journal of China & Foreign Highway

The deflection influence surface (DIS) of a spatial structure is difficult to calculate using the existing two-dimensional boundary element method.To address this issue,a damage localization method based on DIS calculated using the three-dimensional boundary face method (BFM ) was proposed.A custom BFM program with an internal loop was developed,and the internal forces and deformations of a square plate and a supported T-beam structure were calculated using the static method.By specifying the domain of the order of a bivariate polynomial function (BPF ),a secondary optimization program for influence surfaces was established,and the DIS with the minimum mean square error was obtained.The …

Go to article

Research On Construction Monitoring Of Continuous Rigid Frame Bridge Based On Knn Algorithm, Liu Jianlin, Pan Kai, Yang Gang, Wang Junming Aug 2025

Research On Construction Monitoring Of Continuous Rigid Frame Bridge Based On Knn Algorithm, Liu Jianlin, Pan Kai, Yang Gang, Wang Junming

Journal of China & Foreign Highway

To address common issues in bridge construction monitoring,such as sensor damage and failure in strain and displacement measurements,this study took the Nanliu Jialing River Bridge as a case and proposed a method based on the K-nearest neighbor (KNN ) algorithm to reconstruct missing construction monitoring data.ANSYS Workbench was used to establish a finite element model (FEM ) of the bridge construction process to verify the effectiveness of the KNN algorithm in the presence of missing bridge construction monitoring data.The results show:① KNN algorithm can assist in filling short-term data gaps caused by damage to strain and displacement sensors during bridge …

Go to article

Shear Strength Test Of Uhpc-Nc Bonding Surface, Zhang Shichang, Yan Donghuang, Liu Yun, Yuan Sheng, Wang Shuo Aug 2025

Shear Strength Test Of Uhpc-Nc Bonding Surface, Zhang Shichang, Yan Donghuang, Liu Yun, Yuan Sheng, Wang Shuo

Journal of China & Foreign Highway

As a cement-based composite material with excellent mechanical properties,ultra-high performance concrete (UHPC ) demonstrates outstanding performance in tensile and compressive strength,durability,and impermeability.This material is suitable for the reinforcement and repair of normal concrete (NC) bridge structures.To study the shear behavior of the UHPC-NC bonding interface and its reinforcement effect,this paper conducted interface shear tests using Z-shaped specimens and designed a total of six sets of comparative specimens.The influence of parameters such as the planted bar ratio,implantation depth,and bonding surface size on the shear strength was explored.Through experiments,the load –slip curve and the shear strength data were obtained.The results show that:① …

Go to article

Field Measurement And Analysis Of Wind Characteristics At Xuefenghu Bridge Site, Yu Wenhao, Yi Lu Aug 2025

Field Measurement And Analysis Of Wind Characteristics At Xuefenghu Bridge Site, Yu Wenhao, Yi Lu

Journal of China & Foreign Highway

Wind field parameters at bridge sites serve as an important basis for wind-resistant bridge design.The terrain surrounding the Xuefenghu Bridge is unique-mountains flank both sides in the bridge-aligned direction,and the bridge spans the wide surface of the Zhexi Reservoir.In order to investigate the wind field characteristics under such complex topographic conditions,an observation,acquisition,and wireless data transmission system was established at the bridge site.A one-year in-situ wind measurement campaign was conducted,and the characteristics of average wind and fluctuating wind were deeply analyzed.The results show that the average wind speed at the bridge site generally follows a Weibull distribution,and the average wind direction …

Go to article

First Prev Next Last