Materials Science and Engineering Commons^™

Effects Of Soil Properties On Cp Performance, Cecilia Segretario

Williams Honors College, Honors Research Projects

This research aims to evaluate the affect of various soil properties on the effectiveness of cathodic protection (CP) in preventing underground pipeline corrosion. Metal coupons of common pipeline materials with applied CP will be mounted in several separate controlled soil environments to manipulate real world underground corrosion scenarios. Each soil environment will have different physical properties by mixing the soil with a prepared chemical solution. The physical properties to be evaluated include pH, resistivity, and moisture content. At the end of a corrosion duration, weight loss method will be used to evaluate the corrosion rate over that period. Additionally, the …

Pla Polymer Binder In Core Production - Influence On Final Casting Dimensions, Artur Soroczyński, Krzysztof Rechowicz

Virginia Digital Maritime Center (VDMC) Faculty Publications

The foundry industry is seeking an ecological alternative to synthetic molding resins. This study evaluates the technological properties of core sands bonded with biodegradable polylactide (PLA). Cores prepared on a 2% quartz sand matrix were subjected to casting processes using two alloys with extremely different pouring temperatures: gray cast iron (approx. 1200 °C) and AK11 silumin (approx. 710 °C). The research methodology included macroscopic assessment, dimensional analysis using 3D scanning (GOM Inspect), and qualitative knock-out assessment supported by numerical temperature field simulation. The results showed that the high crystallization temperature of cast iron leads to complete thermal degradation of the …

Thermo-Rheological And Tribological Properties Of Low- And High-Oleic Vegetable Oils As Sustainable Bio-Based Lubricants, Abiodun Saka, Tobechukwu K. Abor, Anthony C. Okafor, Monday U. Okoronkwo

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Vegetable oil-based lubricants have attracted increased research attention in recent decades as sustainable alternatives to conventional petroleum-based lubricants in metal machining. However, more studies are required to fully elucidate the thermo-rheological and tribological properties. This study presents an investigation of the thermo-rheological and tribological properties of different vegetable oils, including low- and high-oleic soybean oil, high-oleic sunflower, safflower, and canola oils. The lubricity, and evolution of viscosity and thermodynamic properties as a function of temperature were investigated to obtain important parameters including the viscosity index, flow behavior index, flow activation energy, specific heat capacity, thermal conductivity, coefficient of friction, contact …

Microwave-Assisted Reduction Of Critical Metal Oxides From E-Waste Mixture, Kurundu Shavinka Jayasekera

Graduate Theses, Dissertations, and Problem Reports (ETD)

The efficient recovery of critical metals such as tantalum (Ta), manganese (Mn), gallium (Ga), and indium (In) from electronic waste (e-waste) is essential for resource sustainability and environmental protection. This research uses microwave-assisted treatment to investigate the carbothermal reduction of these four specific metals from their oxides in a simulated e-waste mixture, with carbon black serving as both a microwave coupling and reduction agent. Microwave processing is used specifically because it offers a rapid and energy-efficient alternative to conventional thermal methods, with the benefits of intrinsic heating and selective heating of materials. The first experiments centered on understanding the effects …

Development, Synthesis And Characterization Of Advanced Low- Cobalt And High-Nickel Cathode Materials For Lithium-Ion Batteries, Arjun Patel

Theses and Dissertations

This dissertation focuses on the improvement of structural and electrochemical stability of active materials for lithium-ion batteries. It explores the modification strategies to mitigate the issues related to Ni-rich cathode materials, along with the continuous production of cathode precursors using a slug flow reactor to improve the quality of the product.

The First part of the dissertation examines the effect of substitution of cobalt with aluminum and iron on the electrochemical stability of Ni-rich lithium nickel cobalt manganese oxide (NCM) materials. This study investigates how Al and Fe doping work and how they impact the performance and stability of these …

Ion Hydration In Bulk And Nanoconfined Water: Insights From Machine Learning Force Fields, Zachary D. Baker

Theses and Dissertations--Chemical and Materials Engineering

Understanding ionic hydration remains a central challenge in physical chemistry and materials science, as the interactions between ions and water molecules govern diverse phenomena ranging from electrolyte transport to selective ion separation. While experimental techniques have provided invaluable insights into solvation energetics and coordination numbers, they often lack atomistic resolution, particularly under nanoscale confinement where direct measurement becomes infeasible. Molecular dynamics (MD) simulations can bridge this gap; however, conventional classical force fields are limited by their simplified, fixed functional forms and empirical parameterization, whereas ab initio molecular dynamics (AIMD) achieves higher accuracy at the expense of severe computational cost and …

Understanding The Influence Of Applied Magnetic Field On Aluminum Alloys: Implications On Strength, Precipitate Development And Diffusion Of Solutes, Damilola David Alewi

Theses and Dissertations--Chemical and Materials Engineering

The processing of certain metals and alloys under magnetic fields presents a promising yet underexplored frontier for controlling microstructure alongside improving physical and mechanical properties. Magnetic fields can be strategically applied at different stages of materials processing, from melting and solidification to subsequent heat treatments to achieve targeted properties in materials. Although magnetic fields have been found to aid changes in microstructural evolution and phase equilibria in ferrous materials, there is limited application of this technique in non-ferrous material systems. This dissertation aims at contributing to the understanding of the influence of magnetic field on the mechanical properties and solid-state …

Enhancing The Mechanical Properties Of Sla 3d-Printed Bio-Resin From Linseed Oil Using Cellulose And Lignin Biopolymers, Chukwunonso A. Ikedionu

College of Graduate Studies: Theses & Dissertations

Abstract

This research explores the development of bio resin from linseed oil by the process of epoxidation and acrylation to produce acrylated epoxidized linseed oil (AELO). Lignin and cellulose biopolymers were added as reinforcement at varying weight fractions of 1 wt.%, 2.5 wt.%, and 5 wt.%, and their mechanical performance was compared against pure AELO. The formulations were printed using an Elegoo SLA 3D printer to create standardized test specimens like tensile bars, compression cylinders, and hardness blocks, which were all prepared according to the ASTM testing standard.

The results indicate that reinforcement effects depend on both filler type and …

Re-Crosslinkable Particle For Conformance Control And Temporary Plugging, Yifu Long, Bowen Yu, Baojun Bai, Thomas P. Schuman

Patents

The present invention generally relates to the composition of particle gels for conformance control, well drilling and well treatments. More particularly, this invention relates to swellable polymer particle gels that can re-crosslink, i.e., reassociate and self-heal, at subterranean conditions. These particle gels can be deployed to improve the conformance of water flooding of especially matrix bypass events (MBEs), that are also known as void space conduits. Moreover, these particle gels can be deployed for controlling the water production and increasing of petroleum recovery. The inventive particles can also be deployed as diverter for well stimulation.

Coating Compositions And Methods For Using The Same, Fateme Razaei, Thomas P. Schuman, Glenn C. Morrison

Patents

Coating compositions and methods for using the same are disclosed. The coating compositions can include an aminosilica adsorbent. The coating compositions can adsorb CO2 .

Nontoxic High Temperature Resistant Hydrogels, Thomas P. Schuman, Baujun Bai, Buddhabhushan Pundlik Salunkhe

Patents

Compositions of swellable non-toxic hydro gels and their use in conformance control are described herein. More specifically, the present invention generally relates to the hydro gels compositions that can be used to treat the oil reservoirs having high temperature and high salinity conditions. The compositions generally comprise a plurality of swellable particles having one or more crosslinkers interspersed within a polymer matrix. The compositions can also be used in biomedical, agricultural, fracking and similar applications wherein thermally-stable, nontoxic hydrogels are required.

Ground Testing Of A Magnetic-Electrostatic Separation System For Lunar Regolith Beneficiation, Peter Bachle, Charles Wood, Jeffrey Smith, Fateme Rezaei, David Bayless, William Schonberg, Daoru Han

Materials Science and Engineering Faculty Research & Creative Works

The separation of lunar regolith by mineral composition and size category is useful forin-situ resource utilization (ISRU). The research presented herein discusses the designing and development of equipment that has the potential to separate lunar regolith into aluminum, iron-titanium, and magnesium-iron ores. Along with the metal ore separation, this equipment shows the potential to separate regolith by size categories. The combined effect of these separation methods generates output that is valuable to subsequent use in metal and oxygen extraction, additive manufacturing, and regolith sintering processes. The designed equipment uses a dual-strength magnet system with N42 and N52 neodymium magnets for …

Reuse Of Calcium Carbonate (Caco3) Recovered From Discarded Carpets As Filler In Fiber-Reinforced Polymer (Frp) Composites, Roshan Devkota

Graduate Theses, Dissertations, and Problem Reports (ETD)

Over four billion pounds of carpet are discarded annually in the United States, making carpet waste a significant environmental concern. Calcium carbonate (CaCo₃) constitutes up to 45% of the mass of most synthetic carpets. Reusing this CaCo₃ as a filler in the rapidly growing fiber-reinforced polymer (FRP) industry, which is projected to reach USD 10.38 billion, presents a low-cost, practical approach to developing a market-based solution to post-consumer carpet waste.

This study investigates the reuse of CaCo₃ recovered from discarded carpet backing as a filler in FRP composites, focusing on its mechanical viability in comparison to virgin CaCo₃. The methodology …

Machine Learning Modeling For Hydrolysis Recycling Of Pet Waste, Jie Li, Lanjia Pan, Hossein Abedsoltan, Hailong Wang, Taiyang Liu, Xiangzhou Yuan, Yong Sik Ok, Yin Wang

Chemical and Biochemical Engineering Faculty Research & Creative Works

The hydrolysis of polyethylene terephthalate (PET) into terephthalic acid (TPA) can efficiently recycle waste PET, but achieving high conversion efficiency through smart reaction design remains challenging. To develop a robust and accurate machine learning (ML) model for the in-depth understanding and intelligent design of PET hydrolysis, we compiled a new dataset comprising 942 data points and comprehensive information of 44 variables involved in heating type, acid/base catalyst (ABC), organic solvent (OS), co-solvent (CS), phase transfer catalyst (PTC), and operational conditions. The developed Neural Network model demonstrated the best performance in predicting PET conversion, with a testing determination coefficient (R^{2 …}

Iron Ore Tailings Reprocessing By Electrostatic Separation Plus Two Stages Froth Flotation, Vincent Bailey Arohunmolase

Dissertations, Master's Theses and Master's Reports

The reprocessing of tailings is crucial for recovering valuable iron and reducing the environmental impact associated with tailings disposal. This study investigates the practicality of reprocessing tailings to enhance iron oxide content, combining electrostatic separation with a two-stage froth flotation process using oleic acid (direct flotation) and amine (reverse flotation). The primary goal is to efficiently recover valuable iron from tailings, thereby reducing waste and promoting sustainable resource utilization. The process aims to upgrade the iron oxide content to around 93-99% Fe₂O₃, making the recovered material suitable for the production of direct-reduced iron.

Electrostatic separation was …

Polymorphism And Mechanical Behavior In Hot-Pressed 3d-Printed Polyamide Composite: Effects Of Pressure And Temperature, John Barber, Patricia Revolinsky, Jimesh Bhagatji, Diego Pedrazzoli, Sergii Kravchenko, Oleksandr Kravchenko

Mechanical & Aerospace Engineering Faculty Publications

The aim of this work is to study the effect of high-temperature compaction (HTC) upon the polymorphism and the mechanical behavior of an additively manufactured (AM) carbon fiber-reinforced polyamide (PA6). Different pressure and temperature levels during HTC were tested to determine the overall effect on the mechanical behavior and material crystalline composition. Treated, carbon fiber-reinforced PA6 samples were analyzed using differential scanning calorimetry, X-ray diffraction, thermogravimetric analysis, scanning electron microscopy, and three-point bending testing. When considered with respect to as-printed samples, an HTC temperature of 190 °C combined with 80 psi pressure resulted in an increased flexural modulus and strength …

A Comprehensive Review Of Piezoelectric Pvdf Polymer Fabrications And Characteristics, Nadia Ahbab, Sidra Naz, Tian-Bing Xu, Shihai Zhang

Mechanical & Aerospace Engineering Faculty Publications

Polyvinylidene fluoride (PVDF) polymer films, renowned for their exceptional piezoelectric, pyroelectric, and ferroelectric properties, offer a versatile platform for the development of cutting-edge micro-scale functional devices, enabling innovative applications ranging from energy harvesting and sensing to medical diagnostics and actuation. This paper presents an in-depth review of the material properties, fabrication methodologies, and characterization of PVDF films. Initially, a comprehensive description of the physical, mechanical, chemical, thermal, electrical, and electromechanical properties is provided. The unique combination of piezoelectric, pyroelectric, and ferroelectric properties, coupled with its excellent chemical resistance and mechanical strength, makes PVDF a highly valuable material for a wide …

Determination Of Electrochemical Parameters For Predicting Reaction Mechanism And Algorithmic Approaches To Pain Assessment, Huize Xue

Dissertations

This dissertation introduces novel advancements in electrochemical kinetics and pain assessment, structured into two main parts. The first part focuses on the comprehensive analysis of the kinetic and mechanistic aspects of electrochemical reactions, utilizing a combination of experimental techniques and simulation methods. A new software tool, Envismetrics, was developed using Python to facilitate the analysis of complex electrochemical data, including cyclic voltammetry (CV), chronoamperometry (CA), and hydrodynamic voltammetry (HDV). The software was rigorously tested and validated with well-characterized redox systems such as the ferricyanide/ferrocyanide couple, dimethylamine borane (DMAB), and Per- and Polyfluoroalkyl Substances (PFAS). It was successfully used to determine …

Gas-Generating Reactive Materials: Design, Evaluation And Effect Of Morphology On Their Ignition And Combustion, Purvam Mehulkumar Gandhi

Dissertations

This work investigates optimizing gas-generating reactive materials, focusing on particle morphology's effect on ignition and combustion behavior. Metal-based gas-generating energetic materials (EMs) are promising alternatives to replace traditional CHNO compounds. Design of advanced metal-based EMs requires consistent ways of evaluating how their characteristics affect their ignition and combustion. Many relevant evaluation approaches exist; however, the results may be difficult to compare directly across different studies. Commonly, experimentalists ignite metal-based EMs in enclosed chambers and report pressures, P. However, direct comparison of these pressures is hindered by variations in the chamber volume, V, and the EM mass, m. To standardize the …

Decomposition Of Diisopropyl Methylphosphonate (Dimp) Exposed To Elevated Temperatures And Combustion Products Of Reactive Materials, Elif Irem Senyurt

Dissertations

The safe and efficient destruction of chemical weapon agents (CWAs) stockpiles remains a critical global challenge. Understanding the thermophysical properties, decomposition mechanisms, and interactions of CWAs with their environment is crucial for developing effective strategies to mitigate their threats. Diisopropyl methylphosphonate (DIMP) and Dimethyl methylphosphonate are commonly used nerve agent surrogates. This dissertation focuses on DIMP and DMMP, investigates their properties and behavior under conditions relevant to prompt defeat scenarios.

The thermophysical properties of DIMP and DMMP were experimentally characterized, including vapor-liquid surface tension (3-60 °C) and viscosities of neat and aqueous solutions. Results revealed significant non-ideal behavior in aqueous …

Single-Step Synthesis Of Activated Carbon From Arabica Spent Coffee Ground Using K2co3 As Activator Agent, Ghina Ivana Mieldan, Yuliusman Yuliusman

Journal of Materials Exploration and Findings

Activated carbon is a nanomaterial that is often used as an effective adsorbent. Activated carbon raw materials can use biomass, such as coffee grounds, which can be found along with the growth of public interest in coffee drinks. Chemical activators are used for activation to increase biomass carbon's adsorption capacity. Using K₂CO₃ activator to increase the specific surface area of activated carbon is more harmless than KOH. The use of spent coffee grounds as carbon source and food additive K₂CO₃ as an activator can make food-grade activated carbon that can be used for food. …

Effect Of Alkyd And Polyester Resin Compositions On Corrosion Resistance, Blistering, And Adhesion In Utilization Of Oily Sludge As Anti-Rust Coating Material, Gerets Land Kakalang, Yohanes David Kristianto, Johny Wahyuadi Mudaryoto

Journal of Materials Exploration and Findings

Oil sludge is a waste derived from upstream and downstream activities of the oil and gas industry which is estimated at 10,000 tonnes generated from all PERTAMINA downstream activities spread across various fields, processing units and depots throughout Indonesia. Oil sludge has the same characteristics as asphalt, where asphalt in previous studies can be used as an anti-rust coating, so that the handling of oily sludge can be topped up by reusing and having its own added value. The purpose of this research is to utilise waste oily sludge as an alternative anti-rust coating material and compare alkyd resin and …

Electrochemical-Method-Induced Strong Metal-Support Interaction In Pt-Cnt@Sno2 For Co-Tolerant Hydrogen Oxidation Reaction, Shen-Zhou Li, Zi-Jie Lin, Qi-An Chen, Zhao Cai, Qing Li

Journal of Electrochemistry

Inducing the classic strong metal-support interaction (SMSI) is an effective approach to enhance the performance of supported metal catalysts by encapsulating the metal nanoparticles (NPs) with supports. Conventional thermal reduction method for inducing SMSI processes is often accompanied by undesirable structural evolution of metal NPs. In this study, a mild electrochemical method has been developed as a new approach to induce SMSI, using the cable structured core@shell CNT@SnO₂ loaded Pt NPs as a proof of concept. The induced SnO_x encapsulation layer on the surface of Pt NPs can protect Pt NPs from the poisoned of CO impurity in …

Dendrite-Free Strategies For Aqueous Zinc-Ion Batteries: Structure, Electrolyte, And Separator, Gang Wu, Wu-Hai Yang, Yang Yang, Hui-Jun Yang

Journal of Electrochemistry

Continued growth in energy demand and increased environmental pollution constitute major challenges that need to be addressed urgently. The development and utilization of renewable, sustainable, and clean energy sources, such as wind and solar, are crucial. However, the instability of these intermittent energy sources makes the need for energy storage systems increasingly urgent. Aqueous zinc-ion batteries (AZIBs) have received widespread attention due to their unique advantages, such as high energy density, cost-effectiveness, environmental friendliness, and safety. However, AZIBs face significant challenges, mainly the formation of zinc dendrites that seriously affect the stability and lifetime of the batteries, leading to battery …

All-Solid-State Sodium-Ion Batteries: A Leading Contender In The Next-Generation Battery Race, Rui-Jie Zhu, Ze-Chen Li, Wei Zhang, Akira Nasu, Hiroaki Kobayashi, Masaki Matsui

Journal of Electrochemistry

All-solid-state lithium-ion batteries (LIBs) using ceramic electrolytes are considered the ideal form of rechargeable batteries due to their high energy density and safety. However, in the pursuit of all-solid-state LIBs, the issue of lithium resource availability is selectively overlooked. Considering that the amount of lithium required for all-solid-state LIBs is not sustainable with current lithium resources, another system that also offers the dual advantages of high energy density and safety— all-solid-state sodium-ion batteries (SIBs) —holds significant sustainable advantages and is likely to be the strong contender in the competition for developing next-generation high-energy-density batteries. This article briefly introduces the research …

Contributions To Journal Of Electrochemistry, The Flagship Journal Of Chinese Chemical Society Electrochemical Committee, Will Be Listed As A New Recommendation Policy For China Youth Awards Of Electrochemist, Editorial Office Of J.Electrochem.

Journal of Electrochemistry

No abstract provided.

Capacity Of Self Compact Concrete Walls Using Attapulgite As A Partial Replacement Of Cement Under One Way And Two Way Action Restriction, Wissam Kadhim Alsaraj, Luma Abdul Ghani Zghair, Akhlas Hashem Mohammed

Al-Esraa University College Journal for Engineering Sciences

This investigation about the structural performance of sustainable self-compact concrete walls exposed to eccentric axial regularly dispersed loading, including the effect of aspect ratio (AR) and slenderness ratio (λ) by one-way and two-way action. The experimental program includes testing ten wall panels, the eccentricity of the loading system equivalent to one-sixth of depth. These wall panels are separated into four groups, each one consisting of three specimens. first and second groups clarify the aspect ratio (H/L) effect. The results indicated for decreasing AR from (0.75 to 0.625), (0.625 to 0.5), and (0.75 to 0.5), the increase of final load is …

Exploring The Benefits Of Feature Selection Based On Bat Algorithm And Deep Learning In Brain Cancer Diagnosis, Noor Fawzi Shafiq

Al-Esraa University College Journal for Engineering Sciences

Brain cancer is considered one of the most dangerous types that must be treated as soon as possible. Therefore, it is necessary to detect brain cancer in its early stages to enhance the diagnosis of the condition. This study proposes to combine the bat algorithm (BA) with deep learning methods to identify and classify brain tumors in medical images accurately.

In this paper, the bat algorithm was used to select distinctive features from the input brain images. The Bat Algorithm (BA) is a metaheuristic optimization algorithm that mimics the echolocation behavior of bats. It efficiently explores the feature space to …

Unveiling The Hidden Threat: How Wireless Networks Fuel Serious Cyber Attacks, Ibtesam Jomaa Hawi

Al-Esraa University College Journal for Engineering Sciences

The spread of wireless networks has led to an increase in serious cyber attacks due to their weak architecture. This article focuses on reevaluating cybersecurity in wireless network technology by integrating statistical information detection methods and artificial intelligence (AI) algorithms. To construct a wireless networking scenario that accurately reflects real-life conditions, we created a data fabrication that included four pre-existing anomalies as well as four newly introduced anomalies. The synthetic dataset created from these generation processes contains 20 thousand distinguishable values, which are later divided into training and validation sets. Using the strategy described before, we began to analyze the …

A Study On Improving The Accuracy And Effectiveness Of Similarity Detection Processes In Text Files Using Nlp Techniques, Noor Abdulmuttaleb Jaafar

Al-Esraa University College Journal for Engineering Sciences

The rapid expansion of the Internet has revolutionized access to information, especially in the area of unstructured data, most of which consists of textual content. While instant access to information brings many advantages, it has also given rise to a prevalent problem – plagiarism. Copying and reusing materials without proper permission poses a significant threat to academic integrity and integrity. Rates of plagiarism, especially in academic and scientific publications, have risen with the advent of the Internet, reaching alarming levels, such as 60% in student projects. This study examines the proposed model that includes computation of similarity using cosine coefficients, …