Materials Science and Engineering Commons^™

Sustainable Modification Of Stone Column Technique With Polyethylene Terephthalate (Pet) Plastic For Strengthening The Expansive Clay, Ng Jun Shen, Muzamir Hasan

Journal of Sustainable Construction Materials and Technologies

This research investigated the modification of stone column application by the association of PET plastic as a coarse aggregate material for sustainable material replacement. Clay soil improvement with a granular material fabricated column substantially affected its soil-bearing capacity. Subsequently, it avoided severe problems such as soil settlement and structural instability. Previous studies have mentioned the function and alteration of stone columns using materials like bottom ash and fly ash. Still, no attention has been paid to the utilization of PET plastic for this area. This study examined the feasibility and reliability of materials, PET plastic, and kaolin clay S300 before …

Effect Of Reinforcement Thickness And Content On The Properties Of Compressed Earth Blocks, Salah Eddine Mokeddem, Abdelmadjid Hamouine, Rabia Abdeldjebar, Atef Hamaidi

Journal of Sustainable Construction Materials and Technologies

This study explores the mechanical, hygroscopic, and thermal behavior of stabilized and unstabilized compressed earth blocks (CEB) by incorporating date palm wood chips (DPWC) as a natural fiber additive. The investigation covers a range of DPWC thicknesses (1 mm, 2 mm, 3 mm) and content variations (0% to 1% by weight), focusing on the interaction between the bio-based reinforcement and the stabilized soil matrix, which is stabilized with 10% white Portland cement. The mixtures were compressed at a pressure of 5 MPa using a hydraulic press, providing a detailed examination of how these parameters impact the structural integrity and functional …

Magnetic Nanoparticles: Synthesis And Applications In Life Sciences, Kishore Chand, Erick Salvador Vasquez

Chemical and Materials Engineering Faculty Publications

Magnetic nanoparticles (MNPs) are multifunctional materials with superparamagnetic properties and tunable surface chemistries, making them valuable across diverse fields, such as biomedicine, environmental remediation, and agriculture. This review examines recent advancements in MNP synthesis, encompassing chemical, physical, and environmentally friendly methods while highlighting improvements in size, morphology, and composition control that enhance application-specific performance and environmental sustainability. The review discusses various architectures, including single-core, core–shell, hybrid composites, and stimuli–responsive systems, with an emphasis on their stability, scalability, and functionalization potential. In biomedical applications, MNPs show promise in targeted drug delivery, magnetic hyperthermia, and magnetic resonance imaging contrast enhancement, where biocompatibility, …

Vacuum Consistent Electrochemistry In Ionic Liquid Combined With Oxide Epitaxy, Yuji Matsumoto

Journal of Electrochemistry

We introduce our state-of-the art of “vacuum consistent electrochemistry” to an investigation of the interfaces between oxides and ionic liquid (IL). Pulsed laser deposition (PLD) has been one of the powerful and sophisticated techniques to realize nanoscale preparation of high-quality epitaxial oxide thin films. On the other hand, electrochemistry is a simple, very sensitive, and non-destructive analysis technique for solid-liquid interfaces. To ensure the reproducibility in experiment of the interfaces of such epitaxial oxide films, as well as bulk oxide single-crystals, with IL, we employ a home-built PLD-electrochemical (EC) system with IL as an electrolyte. The system allows one to …

Pm Irras Studies Of Organized Molecular Films At A Gold Electrode Surface, Zhang-Fei Su, Ai-Cheng Chen, Jacek Lipkowski

Journal of Electrochemistry

This feature article illustrates the potential of polarization modulation infrared reflection absorption spectroscopy (PM IRRAS) to provide molecular-level information about the structure, orientation and conformation of constituents of thin films at electrode surfaces. PM IRRAS relies on the surface selection rules stating that the p-polarized IR beam is enhanced, while the s-polarized beam is attenuated at the metal surface. The difference between p- and s-polarized beams eliminates the background of the solvent and provides IR spectra at a single electrode potential. In contrast, two other popular in situ IR spectroscopic techniques, namely, subtractively normalized interfacial Fourier transform infrared spectroscopy (SNIFTIRS) …

Ambient Co2 Capture And Valorization Enabled By Tandem Electrolysis Using Solid-State Electrolyte Reactor, Yan-Bo Hua, Bao-Xin Ni, Kun Jiang

Journal of Electrochemistry

Electrocatalytic carbon dioxide reduction is a promising technology for addressing global energy and environmental crises. However, its practical application faces two critical challenges: the complex and energy-intensive process of separating mixed reduction products and the economic viability of the carbon sources (reactants) used. To tackle these challenges simultaneously, solid-state electrolyte (SSE) reactors are emerging as a promising solution. In this review, we focus on the feasibility of applying SSE for tandem electrochemical CO₂ capture and conversion. The configurations and fundamental principles of SSE reactors are first discussed, followed by an introduction to its applications in these two specific areas, …

Work In Progress: Exploring The Impact Of International Experiences On The Development Of Students’ Entrepreneurial Mindset, Olgha Bassam Qaqish, Marcia Pool, William H. Pennock, Erick Salvador Vasquez, Fahmidah Ummul Ashraf

Chemical and Materials Engineering Faculty Publications

International experiences, including collaborative online international learning (COIL) experiences that naturally increase accessibility, are of interest to many undergraduate students. These experiences provide educators a unique opportunity to develop a student's entrepreneurial mindset (EM). Additionally, hands-on experiences aligned with the National Academy of Engineering’s (NAE) grand challenge themes (Sustainability, Security, Health, and Joy of Living) support connections between the experience, disciplinary knowledge, multicultural awareness, and EM. Through this Work-in-Progress (WiP) study, we seek to answer: 1) How do international experiences influence undergraduate science and engineering students’ EM, and 2) How does the international experience modality (i.e., study abroad or COIL) …

Modeling And Estimation Of Co2 Capture By Porous Liquids Through Machine Learning, Farid Amirkhani, Amir Dashti, Hossein Abedsoltan, Amir H. Mohammadi, John L. Zhou, Ali Altaee

Chemical and Biochemical Engineering Faculty Research & Creative Works

Porous liquids (PLs) are newly developed porous materials that combine unique fluidity with permanent porosity, which exhibit promising functionalities. They have shown ability to efficiently absorb greenhouse gases such as carbon dioxide (CO₂). Experimental measurement is one approach to determining the solubility of various greenhouse gases in PLs, which has drawbacks such as being expensive and time-consuming. Hence, simulation models are valuable to predict the solubility of CO₂ in various PLs. This work aims to develop machine learning (ML) modeling methods for accurately estimating CO₂ solubility under varying conditions (e.g. PLs, temperature, pressure). Adaptive Neuro-Fuzzy Inference …

Entrepreneurially Minded Learning (Eml) Micromoment Activities Generated Using Students' Experiences In A Fluid Flow And Heat Transfer Course, Erick Salvador Vasquez, Megan Morin

Chemical and Materials Engineering Faculty Publications

The Entrepreneurially Minded Learning (EML) Framework involves the 3 C's: curiosity, connections, and creating value. Several design courses, open-ended assignments, and laboratory experiences can successfully lead to EML implementations. However, these implementations require extensive class time and instructor feedback, limiting their use in core engineering courses. Developing EML activities that are active, engaging, and rapid to deploy in a classroom setting can promote the sustained growth of an entrepreneurial mindset (EM). EML micromoment activities are emerging as a practical tool to facilitate the incorporation of the 3 Cs through rapid activity implementations that only last 2 – 30 minutes. These …

Camino—Career Advancement, Mentorship, Inspiration, And Opportunities: A Stem K-12 Outreach Initiative, Hector A. Pulgar, Francisco Zelaya-Arrazabal, Erick Salvador Vasquez, Sebastian N. Martinez Lizana

Chemical and Materials Engineering Faculty Publications

CAMINO is a STEM program designed to promote career advancement, provide mentorship, give inspiration, and offer opportunities for K-12 Hispanic students located in East Tennessee. As part of the educational component of an NSF CAREER grant, the program launched in 2021 and is a collaboration between a research group from the University of Tennessee and one of the high schools with the largest Hispanic populations in the Knoxville Metropolitan area. These students from minority backgrounds may limit their aspirations and may not pursue higher education and/or professional development for numerous reasons, such as limited motivation, insufficient exposure to higher education, …

Chemical Recycling Of Pet Plastic Waste, Charlie Parker, Benjamin Puga, Jake Verschoor

Materials Engineering

The growing accumulation of plastic waste, specifically polyethylene terephthalate (PET), has driven the need for more efficient and scalable chemical recycling methods. This study investigated the methanolysis of PET using zinc oxide (ZnO) nanoparticles as a catalyst and tetrabutylammonium chloride (NBu₄Cl) as an ionic liquid, aiming to reduce methanol consumption while achieving high PET conversion efficiency. ZnO nanoparticles were synthesized via wet chemistry and characterized using Dynamic Light Scattering (DLS), which showed an average particle size of 13.5 nm with a polydispersity index of 0.1556, indicating a moderately-high monodisperse distribution of particles sufficient for reactions. The main conversion product, dimethyl …

Performance Evaluation Of Aminated Multi-Walled Carbon Nanotubes Incorporated With Green Synthesized Iron Nanoparticles For Toxic Dyes Sequestration From Textile Wastewater, Titus Chinedu Egbosiuba, Cynthia Chukwuemeka, Jonah Chukwudi Umeuzuegbu, Nwanneka Chibuzo Mmonwuba, Ugochukwu Ewuzie, Monday Uchenna Okoronkwo, Valentine Chikaodili Anadebe, Saheed Mustapha, Ambali Saka Abdulkareem, Jimoh Oladejo Tijani, Ashish Patel, Virendra Kumar Yadav

Chemical and Biochemical Engineering Faculty Research & Creative Works

This study evaluates the performance of aminated multi-walled carbon nanotubes (AM-MWCNTs) integrated with zerovalent iron nanoparticles (ZVI) synthesized using cashew leaf (Anacardium occidentale) extract (AM-MWCNTs@ZVI) for the removal of Congo Red (CR) and Methylene Blue (MB) dyes from textile industrial wastewater. The nanocomposite was characterized using FTIR, XRD, BET, HRSEM, and HRTEM analyses, confirming its functional groups, crystalline structure, and enhanced surface area of 1050.4 m²/g. The ecological risk degree of the textile pollutants was assessed to determine the percentage concentrations of crystal violet, Congo red, methyl orange, methylene blue and rhodamine B. Batch adsorption experiments identified optimal …

Student-Led Video Podcasting In A Chemical Behavior Of Materials Course, Erick Salvador Vasquez

Chemical and Materials Engineering Faculty Publications

Video podcasts, or vodcasts, are a form of podcasting that combines video and audio to deliver various types of educational content effectively. To our knowledge, very few studies have focused on student-produced podcasting for learning technical engineering concepts. This study explores using student-created technical videos in a course on the chemical behavior of materials through three separate assignments. The first assignment centered on sustainability aspects. Students, divided into groups of three, were tasked to review two influential journal articles on plastic waste input into the ocean and metal recycling. Each group had to prepare and deliver a technical script about …

Interaction Of Liquid Phase Diisopropyl Methyl Phosphonate (Dimp) With Material Surrogates For Components Of Soil And Combustion Products Of Metal Fuels, Khushi Sunil Patel

Theses

Combustion products of three different Al-based materials, Al-CaCO₃, Al-SiO₂, and Al-Fe₂O₃ , have been produced to understand their interaction with liquid diisopropyl methyl phosphonate (DIMP), a surrogate for chemical weapon agents. The purpose of this is to see which materials were more effective at DIMP adsorption and decomposition at different temperatures. Prepared materials were characterized using electron microscopy, x-ray powder diffraction, and nitrogen adsorption. Prepared powders were submerged in DIMP and heated in a thermal analyzer, tracking the mass changes as a function of temperature. Surfaces of the recovered materials were studied using …

Preparation And Modification Of Mxene Composites For Application In Electrochemical Energy Storage, Zhang-Hai You, Ding-Ze Lu, Kiran Kumar Kondamareddy, Wen-Ju Gu, Peng-Fei Cheng, Jing-Xuan Yang, Rui Zheng, Hong-Mei Wang

Journal of Electrochemistry

With the acceleration of advanced industrialization and urbanization, the environment is deteriorating rapidly, and non-renewable energy resources are depleted. The gradual advent of potential clean energy storage technologies is particularly urgent. Electrochemical energy storage technologies have been widely used in multiple fields, especially supercapacitors and rechargeable batteries, as vital elements of storing renewable energy. In recent years, two-dimensional material MXene has shown great potential in energy and multiple application fields thanks to its excellent electrical properties, large specific surface area, and tunability. Based on the layered materials of MXene, researchers have successfully achieved the dual functions of energy storage and …

Three-Dimensional Melamine Carbon Sponge/Nai As Cathode Materials For Sodium-Ion Batteries, Qian-Ying Huang, Yue Liu, Zi-Xin Lin, Shu-Yi Zheng, Ting-Ting Mei, Yu-Ting Tang, Ying-He Zhang, Jun Liu

Journal of Electrochemistry

The sodium-iodine (Na-I) battery exhibits significant potential as an alternative energy storage device to the lithium-ion battery. However, its development is hindered by inadequate electrical and thermal stability, as well as the dissolution and shuttling of polyiodide. In this study, we report a preparation method for melamine carbon sponge (MC) via carbonizing a commercially available kitchen sponge. It was revealed that the as-prepared MC, composed of unique self-growing carbon nanotubes, could provide both physical and chemical adsorption capabilities for intermediate polyiodides to improve the electrochemical performance of NaI. Consequently, the NaI/MC electrode effectively minimized polyiodide dissolution and reduced the electrochemical …

Understanding The Morphology And Mass Transport Resistance Of Mesoporous Carbon-Supported Pemfc Based On Modeling Analysis, Hao Deng, Jia Liu, Zhong-Jun Hou

Journal of Electrochemistry

Mesoporous carbon supports mitigate Pt sulfonic poisoning through nanopore-confined Pt deposition, yet their morphological impacts on oxygen transport remain unclear. This study integrates carbon support morphology simulation with an enhanced agglomerate model to establish a mathematical framework elucidating pore evolution, Pt utilization, and oxygen transport in catalyst layers. Results demonstrate dominant local mass transport resistance governed by three factors: (1) active site density dictating oxygen flux; (2) ionomer film thickness defining shortest transport path; (3) ionomer-to-Pt surface area ratio modulating practical pathway length. At low ionomer-to-carbon (I/C) ratios, limited active sites elevate resistance (Factor 1 dominant). Higher I/C ratios improve …

Theoretical Insights Into The Atomic And Electronic Structures Of Polyperyleneimide: On The Origin Of Photocatalytic Oxygen Evolution Activity, Yi-Qing Wang, Zhi Lin, Ming-Tao Li, Shao-Hua Shen

Journal of Electrochemistry

Polymeric perylene diimide (PDI) has been evidenced as a good candidate for photocatalytic water oxidation, yet the origin of the photocatalytic oxygen evolution activity remains unclear and needs further exploration. Herein, with crystal and atomic structures of the self-assembled PDI revealed from the X-ray diffraction pattern, the electronic structure is theoretically illustrated by the first-principles density functional theory calculations, suggesting the suitable band structure and the direct electronic transition for efficient photocatalytic oxygen evolution over PDI. It is confirmed that the carbonyl O atoms on the conjugation structure serve as the active sites for oxygen evolution reaction by the crystal …

Assessment Of H2s-Induced Cracking Susceptibility In Steam Line Pipes And Weld Zones During Geothermal Well Construction, Riene Kaelamanda Pragitta, Yudha Pratesa

Journal of Materials Exploration and Findings

The susceptibility of steam line pipes, especially in the HAZ (heat-affected zone) and weldment areas, to hydrogen sulfide in the geothermal industry is crucial to understand from the early stages, particularly during construction. The combination of tensile stress from residual stresses after welding and metallurgical phase transformation makes the joint areas vulnerable to sulfide stress cracking. This condition becomes even more extreme when the equipment operates during the well stimulation phase. This research assesses the severity of H₂S-induced cracking using NACE MR0175 and ISO 15156-1 standards, focusing on the effects of pH and partial pressure of H₂S (p_{H₂S …}

Tuning The Morphology Of Triblock Copolymers Via Homopolymer Blending, John F. Searles

Honors Theses

Morphology plays an important role in the physical properties of block copolymer (BCP) materials. Depending on the type of morphology and chemical composition of the blocks, BCPs are used in applications ranging from soft biomaterials for biomedical devices to rigid materials for ballistics protection. Due to incompatibility between comonomers and required block weight ratios to achieve targeted morphologies, it is generally necessary to use complex, time-consuming, and expensive synthetic techniques to prepare BCPs. As a result, there is increased interest in the development of new processing methods to tailor block copolymer morphology without the need for additional synthesis. The morphological …

Ultrafast Laser Surface Structuring For Wettability Control On Copper, Akshay Arvind Nagvenkar

All Theses

Wettability is a crucial surface property influencing various phenomena, including heat transfer, cell adhesion, and corrosion. Engineering devices can achieve superior performance by precisely manipulating surface wettability. As a result, extensive research has focused on developing surfaces that exhibit either extreme water attraction (superhydrophilic) or strong water repellency (superhydrophobic). Tailoring surface wettability paves the way for numerous applications, such as drag reduction in marine vessels, controlled drug delivery, efficient water collection, advanced liquid transport systems, oil-water separation, anti-corrosion coatings, friction reduction, and self-cleaning materials. Ultrafast laser surface structuring is a promising approach for engineering multifunctional surfaces, effectively modifying material properties …

Mechanistic Insights Into Polymer-Assisted Graphene Exfoliation: The Roles Of Velocity, Adhesion, Cohesion, Temperature, Peeling Mode, And Edge Defect Via Coarse-Grained Molecular Dynamics, Linjiale Dai

All Theses

Graphene exfoliation is a critical step in the fabrication of high-quality graphene

layers. However, the underlying fracture mechanisms remain poorly understood. In this

work, I employed coarse-grained (CG) molecular dynamics (MD) simulations to

investigate how factors such as interfacial binding energy, substrate cohesion, temperature,

peeling mode, and edge defects influence the outcome of the exfoliation process. To model

polymer-assisted mechanical exfoliation, I used a finite-size system in which multilayer

graphene (MLG) is sandwiched between two thin polymer films. Leveraging the

spatiotemporal efficiency of the CG model, I performed fifty simulation iterations per

parameter set and analyzed the results from a …

Binary Solid/Liquid Equilibrium Of Mixtures Of Thermally Robust Salts And Molecular Compounds For Use As Heat Transfer Fluids, Jared Ridge Mathews

Honors Theses

Fossil fuels, contributors to climate change that may bear catastrophic consequences, power the entire world. The human species is almost entirely dependent on fossil fuels for energy, but other sources of renewable and environmentally friendly energy must be developed. Concentrated solar power (CSP) is a promising source of renewable energy with hampered potential—better heat transfer fluids (HTFs) are needed for it to be economically feasible. Currently, the HTFs in industrial use are predominantly either synthetic oils or nitrate-based molten salts. Synthetic oils are only stable up to 400 °C, and molten salts often have high melting temperatures, making them prone …

Incorporating Recycled And Repurposed Plastic Into 100% Reclaimed Asphalt Pavement, Basant Bhatt

Graduate Theses and Dissertations (2019 - present)

The increasing awareness of sustainability in the asphalt industry has driven the use of recycled materials like reclaimed asphalt pavement (RAP) and waste plastic. This study examines the incorporation of recycled polypropylene (rPP), recycled high-density polyethylene (rHDPE), and recycled low-density polyethylene (rLDPE) at 0.3%, 0.6%, and 0.8% dosages into 100% RAP, along with the warm mix asphalt additive Evotherm® P25. Laboratory tests were conducted to evaluate the mechanical and durability performance of the modified asphalt mixtures while rutting and fatigue life were evaluated using mechanistic-empirical (ME) analysis in PerRoad software. Both plastic type and dosage had a statistically significant impact …

Multifunctional Pvdf Ionogels With Magnetic Nanoparticles For Electroactive And Magnetic Actuation, Alfredo Carrillo Valverde

Chemical Engineering Undergraduate Honors Theses

The fast development of compact and multifunctional electronics has driven interest in smart materials capable of responding to multiple stimuli. Ionogels, polymers that have been swollen with ionic liquids (IL), offer several favorable electrochemical and thermal properties due to their intrinsic ion conductivity, wide electrochemical window, non-flammability, and high thermal stability. However, their poor mechanical properties (e.g., modulus and strength) limit their use in applications. In this work, multifunctional PVDF ionogel composites were made by blending magnetically responsive iron oxide nanoparticles (Fe₃O₄ MNPs) into the polymer matrix. The influence of MNP concentration (9-21 wt%) on composition, ionic …

Dust Analyses In Ventilation Ducts, Karolina Vyhlidalova, Petr Vlček, Olga Rubinová, Jiří Bernard

Journal of Sustainable Construction Materials and Technologies

The paper describes the importance of monitoring the dust in the atmosphere of human life. It deals with the issue of dust in air ducts, approaching the methods that can be used to detect the amount of dust. For conditions for buildings in the Czech Republic there is created the methodology of quantitative and qualitative evaluation of dust sediment for the needs of HVAC and other building surfaces. The scale for visual evaluation was created and it has been elaborated the assessment of kind of particles contained in dust.

Assessment Of Long Time Approximation Equation To Determine Thermal Conductivity Of High Porous Materials With Nss Probe, Hussein Humaish, Bastien Ruet, Laurent Marmoret, Hassen Beji

Journal of Sustainable Construction Materials and Technologies

Recent economic changes have increased the focus on energy conservation in buildings. Improve insulation represents one of the biggest challenge to save energy. The TP02 Huksefux® Non Steady State Probe (NSSP) has been used to determine the thermal conductivity of the building insulation materials. Usually, the long term approximation equation (linear form) is applied to determine the thermal conductivity when using hot wire techniques. Long term approximation has been successfully used to characterize glycerol: a fluid which doesn’t present contact resistance and porosity. But, an S-shaped appears for more porous materials. So to generalize the possibility of using this method, …

Electrocatalytic Nitric Oxide Reduction To Yield Ammonia Over Fe3C Nanocrystals, Sen Lin, Lang Zhang, Tong Hou, Jun-Yang Ding, Zi-Mo Peng, Yi-Fan Liu, Xi-Jun Liu

Journal of Electrochemistry

Nitric oxide (NO), which generally originates from vehicle exhaust and industrial flue gases, is one of the most serious air pollutants. In this case, the electrochemical NO reduction reaction (NORR) not only removes the atmospheric pollutant NO but also produces valuable NH₃. Hence, through the synthesis and modification of Fe₃C nanocrystal catalysts, the as-obtained optimal sample of Fe₃C/C-900 was adopted as NORR catalyst at ambient conditions. As a result, the Fe₃C/C-900 catalyst showed an NH₃ Faraday efficiency of 76.5% and an NH₃ yield rate of 177.5 μmol·h^–1·cm^{–2 …}

Ordering Degree Regulation Of Pt2Nico Intermetallics For Efficient Oxygen Reduction Reaction, Chen-Hao Zhang, Han-Yu Hua, Jun-Hao Yang, Qian Zhang, Chang Yang, De-Li Wang

Journal of Electrochemistry

Alloying transition metals with Pt is an effective strategy for optimizing Pt-based catalysts toward the oxygen reduction reaction (ORR). Atomic ordered intermetallic compounds (IMC) provide unique electronic and geometrical effects as well as stronger intermetallic interactions due to the ordered arrangement of metal atoms, thus exhibiting superior electrocatalytic activity and durability. However, quantitatively analyzing the ordering degree of IMC and exploring the correlation between the ordering degree and ORR activity remains extremely challenging. Herein, a series of ternary Pt₂NiCo intermetallic catalysts (o-Pt₂NiCo) with different ordering degree were synthesized by annealing temperature modulation. Among them, the o-Pt …

Performance Of Co2/H2O Co-Electrolysis In A Flat-Tube Solid Oxide Electrolysis Cell Stack Under Air-Free Environment, Xiao-Hui Zhong, Fei Wang, An-Qi Wu, Bei-Bei Han, Jian-Xin Wang, Wan-Bing Guan

Journal of Electrochemistry

This work investigates the transient performance and stability of CO₂/H₂O co-electrolysis in an air-free environment using a flat-tube solid oxide electrolysis cell (SOEC) stack. The results show that the transient behavior of the stack with and without blowing gas in the air electrode is almost the same. With a current density of 0.67 A·cm⁻²@750 °C, the stack operated for over 200 h under co-electrolysis conditions with no air blowing, and the voltage drop rate of the stack was approximately 0.203%/100 hours. Microstructure analysis reveals significant loss of Ni particles and formation of an insulating …