Materials Science and Engineering Commons^™

Tiny Plastic, Big Trouble: How Polystyrene Nanoparticles Impact Dna-Damage Repair Deficient Cervical Cancer Cells, Jordan D. Berezowitz, Mira C. Fish, Lauren E. Mehanna, Breanna Knicely, Claire E. Rowlands, Eva M. Goellner, Brittany E. Givens

Chemical and Materials Engineering Faculty Publications

Microplastics are becoming increasingly abundant waste products; therefore, the risk of human exposure is also increasing. The cytotoxic consequences of microplastic exposure, particularly in cancer, have yet to be explored. We obtained commercially available polystyrene nanoparticles of uniform size (86.61 ± 6.41 nm) and confirmed the chemical composition and shape using Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM), respectively. We evaluated colloidal stability over a range of concentrations from 1–1000 µg mL⁻¹ using hydrodynamic diameter and zeta potential, determining that higher concentrations exhibit greater colloidal stability compared to lower concentrations. Specifically, the zeta potential increased from …

Dielectrophoretic Biomarkers For Cancer Detection And Cell Analysis: Integrating Microfluidics And Ai, Raphael Olumide Oladokun

Graduate Theses, Dissertations, and Problem Reports (ETD)

Pancreatic ductal adenocarcinoma (PDAC) carries a five-year survival rate of 13%, driven largely by late-stage diagnosis and the absence of sensitive noninvasive screening tools. Current diagnostic methods lack the sensitivity to detect disease-associated systemic changes at early and precancerous stages, representing a critical clinical gap. This dissertation addresses the central hypothesis that PDAC and its pathological subtypes induce measurable, disease-associated electrophysiological changes in circulating PBMCs that can serve as correlative liquid-biopsy biomarkers. To test this hypothesis, this work asks: can dielectrophoresis (DEP), impedance and zeta potential analysis with AI-assisted classification distinguish benign pancreatic conditions (non-malignant control), precancerous lesions (primarily IPMNs), …

Made On Mars: Design And Manufacturing Of Structural Polymer-Regolith Composites, Pailey M. Vitale

Williams Honors College, Honors Research Projects

Human exploration of Mars is constrained by harsh environmental conditions and the prohibitive cost of transporting materials from Earth. Long-term sustainability requires the local production of mechanical and structural components using resources available on Mars, thereby minimizing payload mass. This project investigates polymer–regolith composites derived from atmospheric CO₂ and mineral-rich regolith as a pathway toward in-situ manufacturing. These composites, when compatible with additive manufacturing, could replace imported plastics, enable on-demand fabrication, and support closed-loop recycling systems. The objective is to design and evaluate polymer–regolith composites that maintain mechanical integrity and environmental resistance under Martian conditions, including extreme temperature swings, radiation …

Microscopic Insights On Shear Rheology Of Polyampholyte Ionomers Via Molecular Simulations, Kyle Vonscio

Williams Honors College, Honors Research Projects

Ionomers are polymers that contain a small fraction of charged groups. The ionic attraction of charged groups allows ionomers to act similarly to crosslinked polymers. Depending on the strength of electrostatic interactions and structure of the ionomers, different dynamics and rheological responses can be observed. With moderate attraction between ions, these noncovalent crosslinks can be broken when heated, allowing ionomers to flow and show the strength of a crosslinked network at low temperatures. Nonequilibrium molecular dynamics (NEMD) simulations will be performed under shear in the xy-plane and the macroscopic rheology and conformation of the polyampholyte ionomer will be determined. The …

Surface Immobilization Of Stimuli-Responsive Polymers Using A Network Of Aminopropyltriethoxysilane, Walter Bungard, Ryan Nixon

Williams Honors College, Honors Research Projects

The goal of this honors project is to develop a cost-effective and accessible method for entrapping stimuli-responsive polymers onto solid substrates using aminopropyltriethoxysilane (APTES). The entrapment network process will first be replicated on glass or silicon using APTES and poly(N-isopropylacrylamide), involving spin coating and thermal annealing to chemically bond the polymer to the substrate. Once validated, the method will be applied to other stimuli-responsive polymers, including thermo-responsive, electroactive, and pH-sensitive types, with APTES as a control. For each sample, film stability, responsiveness, and surface behavior will be evaluated using contact angles, optical microscopy, and spectroscopic analysis, followed by statistical evaluation. …

Evaluation Of Chromium-Crosslinked Amps-Hpam Copolymer Gels: Effects Of Key Parameters On Gelation Time And Strength, Maryam Sharifi Paroushi, Baojun Bai, Thomas P. Schuman, Yin Zhang, Mingzhen Wei

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Controlling CO₂ channeling in heterogeneous reservoirs remains a major challenge for both enhanced oil recovery (EOR) and secure geological storage. AMPS-HPAM copolymers exhibit high-temperature resistance and brine tolerance compared with conventional HPAM gels, making them well suited for the harsh environments associated with CO₂ injection. Chromium-based crosslinkers (CrAc and CrCl₃) were investigated because sulfonic acid groups in AMPS can coordinate with trivalent chromium ions, enabling dual ionic crosslinking and the formation of a robust gel network. While organic crosslinked AMPS-HPAM gels have been widely studied, the behavior of chromium-crosslinked AMPS-containing systems, particularly their gelation kinetics under …

Effect Of Ionic Strength On Gelation Time And Strength Of Amps-Based Polymer Gels, Maryam Sharifi Paroushi, Xuyang Tian, Baojun Bai, Thomas P. Schuman, Yin Zhang, Mingzhen Wei

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Polymer gel treatment has been widely applied for improving sweep efficiency and controlling excessive water and gas production. Their performance depends on gelation time and final gel strength. In most studies, brine salinity is used to describe the effect of formation water on gel behavior. However, changing salinity also changes ionic strength and ion composition at the same time. Because of this coupling, it is difficult to identify the mechanisms controlling gelation, which has led to inconsistent trends in the literature. Increasing salinity has been reported to either slow or accelerate gelation and to weaken or strengthen gels depending on …

Eco-Friendly Solvent-Based Fabrication Of Single-Layer And Polydopamine-Modified Bilayer Pvdf-Hfp Membranes, Eesh M. Kulshrestha

Theses and Dissertations--Chemical and Materials Engineering

The growing global demand for clean drinking water has intensified the need for advanced water treatment technologies capable of efficiently removing contaminants while maintaining environmental sustainability. Polymeric membrane systems have emerged as an effective approach for water separations due to their high separation efficiency, simplicity, and adaptability to a wide range of water treatment applications. However, traditional membrane fabrication processes often rely on toxic organic solvents, such as N-methyl-2-pyrrolidone (NMP) and diemethylacetamide (DMAc), which pose environmental and health risks. These concerns have led to an increase in regulatory restrictions, primarily through the Registration, Evaluation, Authorisation, and Restriction of Chemicals (REACH) …

Aqueous Synthesis Of Luminescent Semiconductors For Opto-Electronic Applications, Saurabh Singh

Theses and Dissertations--Chemical and Materials Engineering

The advancement of opto-electronic and scintillation technologies relies heavily on developing low-temperature, eco-friendly, and scalable synthesis routes for high performance luminescent halide-based semiconductor materials. However, traditional synthesis methods for halide-based semiconductors, including hot-injection, solvothermal, solid-state reactions, Ligand-Assisted Reprecipitation (LARP), microwave-assisted synthesis, and thin film deposition techniques (spin coating, physical vapor deposition (PVD), chemical vapor deposition (CVD), etc.), often demand toxic organic/inorganic solvents, elevated processing temperatures, and high vacuum/inert environments. Such constraints limit their scalability, raise environmental concerns, and impede their commercial-level device integration. This research overcomes these long-standing challenges by employing water as a powerful crystallization-directing, and environmentally benign medium …

Utilizing Coal For Mesophase Pitch-Based Carbon Fiber Production: Precursors, Processes, And Progress, Christina M. Thompson

Theses and Dissertations--Chemistry

Graphitic materials possess unique properties due to the unique combination of layered crystalline structure and carbon’s low atomic weight. High performance carbon fiber is one such example, displaying exceptional strength-to-weight ratios, stiffness, and thermal and chemical resistance. These properties render high performance carbon fiber a critical structural reinforcement material in the manufacture of composites across various industries, such as for automotive and aerospace applications. However, balancing fiber performance with precursor and processing costs remains a challenge. As alternative carbonaceous feedstocks are explored, coal has gained interest for utilization in graphitic products as a relatively abundant and low-cost source of aromatic …

Nanostructured Cathode Catalysts For Aem Electrolysis: From Catalyst Design To Degradation And Hydrogen Dynamics, Yamini Kumaran

Electronic Theses & Dissertations (2024 - present)

Anion exchange membrane water electrolysis (AEMWE) presents a promising pathway toward cost-effective and sustainable hydrogen production by integrating the chemical robustness of alkaline systems with the compact, zero-gap design of proton exchange membrane electrolyzers. However, the widespread implementation of AEMWE is limited by the availability of highly active and durable platinum-group-metal (PGM)-free catalysts and by an incomplete understanding of their degradation behavior under realistic operating conditions.

This dissertation focuses on the development, characterization, and mechanistic investigation of nanostructured MoNi₄–MoO₂-based electrodes for efficient and stable hydrogen generation under alkaline and membrane-integrated environments. MoNi₄–MoO₂ nanorods …

Evaluation Of A Novel Re-Crosslinkable Preformed Particle Gel For Conformance Control In Ultra-High Temperature Reservoirs, Yanbo Liu, Tao Song, Caleb Kwasi Darko, Thomas P. Schuman, Mingzhen Wei, Baojun Bai

Chemistry Faculty Research & Creative Works

Preferential fluid flow remains a major challenge in subsurface energy production and gas storage operations, resulting in excessive water production in mature oil fields, reduced heat extraction in geothermal reservoirs, and low sweep and storage efficiency in CO₂-EOR projects. Polymer gels are widely used to mitigate high-permeability channels; however, conventional systems exhibit limited plugging efficiency and short lifetimes in ultra-high-temperature reservoirs due to poor thermal stability. This study presents a novel ultra-high-temperature-resistant preformed particle gel (UHT-PPG) developed for conformance control in reservoirs with temperatures of 150–275 °C and severe super-K or channeling problems. The material was evaluated in …

Re-Crosslinkable Hyper-Branched Polymer Gels Based On A Transamidation Reaction, Tao Song, Baojun Bai, Thomas P. Schuman

Patents

The present invention generally relates to the field of conformance control in oil fields, particularly to a re-crosslinkable preformed particle gel system, and composition thereof. The composition of the re-crosslinkable preformed particle gel system contains monomers, crosslinkers, a polymer matrix, and additives. Components in the composition for re-crosslinkable preformed particle gel in the present invention have excellent compatibility with each other, and the obtained gel has excellent long term high-temperature resistance property. Different from prior products, in the recrosslinkable preformed particle gel compositions according to embodiments of the present invention, the components that are used to re-crosslink the particle gels …

Improving Modeling Of Corrosion Products In The Primary Circuit Of Light Water Reactors Through The Experimental Determination Of Crud Characteristics, Sri Saravana Konganapuram Narasimma Bharathi

Electronic Theses & Dissertations (2024 - present)

High-temperature water flowing through the coolant circuits in pressurized water reactors (PWRs) creates a harsh environment, deteriorating these materials. This corrosion results in the formation of oxide layer(s) primarily composed of nickel ferrites, iron oxides, nickel oxides, and other nickel-iron-chrome spinel oxides. Being exposed to fluid with high flow rates and pressure, these oxide layers can be eroded, resulting in particulate fouling due to the release of corrosion products (Chalk River Unidentified Deposits, CRUD) into the coolant circuit. When CRUD subsequently deposits on fuel surfaces, it negatively affects the fuel performance (heat transfer and fuel failure); in addition, the particles …

First-Principles Insights Into Electronic And Magnetic Structure At Hybrid Interfaces And Low-Dimensional Materials And Reaction On Surfaces, Bushra Ashraf

Graduate Studies Theses and Dissertations 2026

Low-dimensional materials and transition metal surfaces/interfaces provide complementary platforms for understanding how dimensionality, symmetry, spin–orbit coupling (SOC), and interfacial charge transfer/hybridization jointly control electronic structure, emergent magnetism, and surface reactivity. Using first-principles modeling with experimental comparisons, this work aims to establish interfacial structure–property relationships across low-dimensional systems.

Strained Pd adlayers on 2H-MoS₂(0001) provide a controlled platform to separate strain-driven exchange from interface-induced quenching in an itinerant d-electron metal. Although expansive strain promotes magnetism in free-standing Pd, strong Pd–MoS₂ hybridization and charge transfer suppress the monolayer moment and leave a narrow thickness window where magnetism re-emerges in …

Aqueous Iron Electrowinning: From Electrolyte Engineering To The Unexplored Potential Of Acetate Systems, Chodwell N. Verenga

Dissertations, Master's Theses and Master's Reports

Iron electrowinning and electrodeposition sit at the intersection of classical metallurgy and developing sustainable manufacturing. With the iron and steel industry responsible for 7 - 9% of global CO₂ emissions, low-temperature electrochemical pathways for iron production have garnered significant research interest. This review examines the fundamental electrochemical principles governing iron deposition, the thermodynamic constraints imposed by the iron-water system, and the kinetic challenges posed by the parasitic hydrogen evolution reaction (HER). The three key electrolyte systems are objectively evaluated: acidic sulfate and chloride electrolytes, alkaline suspension electrolytes and water-in-salt electrolytes. Their operating parameters, faradaic efficiencies, energy consumption and deposit characteristics …

Ion-Imprinted Polymer-Based Sensors For Toxic Metal-Ion Detection In Water: Coordination Chemistry, Transduction Strategies, And Environmental Applications, Ghita Yammouri, Gymama Slaughter

Center for Bioelectronics Publications

Toxic metal contamination in aquatic environments remains a persistent threat to human health and ecosystems. Yet, the high cost, infrastructure demands, and centralized nature of conventional analytical methods constrain routine monitoring. Ion-imprinted polymers (IIPs), a subclass of molecularly imprinted polymers, have emerged as promising synthetic recognition materials for metal-ion sensing because they generate coordination-defined binding sites with high selectivity, chemical stability, low cost, and reusability. This review summarizes recent advances in Ion-imprinted polymer (IIP)-based sensing technologies for toxic metal-ion detection in water from 2016 to 2026. It examines the fundamental recognition chemistry of IIPs, major synthesis strategies used to generate …

Effect Of Local Steel Slag Incorporation On The Mechanical Properties Of Concrete, Ahmed Safaa Tariq Karmah, Wissam Khadum Alsaraj, Luma A. Zghair

Al-Esraa University College Journal for Engineering Sciences

The increasing interest in the production of concrete through the utilization of inexpensive materials has caused a rise in the number of studies concerning the use of materials with cementitious properties, such as Silica Fume, Slag, Fly Ash and other pozzolanic materials. Moreover, the increasing amounts of Steel Slag being produced from local factories that are being deposited without an available method of disposal provides an opportunity to harness the Slag in the production of an inexpensive, and possibly better concrete. Slag has been used as both an addition and substitution of the cement and fine aggregate. The mixtures included …

Decoding Climate Change: A Comprehensive Statistical Insight Into Temperature Anomalies In Iraq And Its Neighboring Countries, Jameel T. Al-Naffakha, Mohammed R. Al-Qassabanda, Israa Jafar

Al-Esraa University College Journal for Engineering Sciences

This study applies advanced statistical techniques, including the Mann-Kendall Trend Test and ARIMA forecasting, to validate and predict temperature anomalies across Iraq and its neighboring countries (2014–2024). Findings confirm a statistically significant warming trend (p < 0.00000005) across all nations, with Syria (1.02°C) and Turkey (0.97°C) experiencing the highest anomalies. GIS-based spatial analysis highlights regional disparities, identifying climate-vulnerable zones. The persistent rise in temperature anomalies correlates with worsening water scarcity, desertification, and extreme weather events, including prolonged droughts and heatwaves. Iraq’s peak anomaly (1.48°C) has exacerbated heat stress, agricultural decline, and reduced river inflows, while Kuwait and Saudi Arabia struggle to maintain critical infrastructure under record-breaking temperatures exceeding 50°C. These climate shifts pose severe risks to water availability, food security, and energy demand, necessitating urgent policy interventions. Key recommendations include enhanced water resource management, climate-adaptive agriculture, and renewable energy expansion. If left unaddressed, rising temperatures could destabilize the region, increasing socio-economic vulnerabilities and escalating resource conflicts. This study underscores the need for cross-border collaboration and sustainable adaptation policies to mitigate the long-term impacts of climate change in the Middle East.

Optimal Power Flow Control In The Iraqi Power Grid Using Artificial Intelligence Algorithms For Carbon Emission Reduction, Mohammed Shakir Juber

Al-Esraa University College Journal for Engineering Sciences

Iraq’s power sector remains in a protracted and severe crisis characterized by a significant mismatch between supply and demand, high levels of losses during transmission and distribution, as well as an increasing challenge to the resources base being largely unfavourably. These inefficiencies impose heavy costs on the national economy in excess of 40 billion annually and they also reinforce greenhouse gas emissions, and exacerbate environmental issues. To deal with these problems, we proposed in this paper that a new hybrid AI tool should be developed for the solution of multi-objective optimization problem based on purpose Genetic Algorithm (GA) merger with …

Applying Machine Learning Techniques For Early Detection Of Cyber Attacks On Iot Devices, Noor Adnan Allamy

Al-Esraa University College Journal for Engineering Sciences

This research designs, implements, and evaluates a machine learning-based framework for the early detection of cyber attacks targeting Internet of Things (IoT) devices, with a specific focus on the context and challenges present in Iraq. The study conducts a comparative analysis of three supervised learning algorithms—Support Vector Machine (SVM), Random Forest (RF), and Deep Neural Networks (DNN)—using a combination of benchmark datasets (NSL-KDD, CIC-IDS-2017, Bot-IoT) and a synthesized dataset adapted to simulate the Iraqi threat landscape. Key performance metrics, including accuracy, precision, recall, and F1-score, were used for evaluation. The proposed Random Forest model demonstrated superior performance, achieving an accuracy …

Ai-Enhanced Heat Transfer Optimization In Magnetic Bio-Nanofluids, Hasan Attyah Shaboot

Al-Esraa University College Journal for Engineering Sciences

This study presents a hybrid Artificial Intelligence–Computational Fluid Dynamics (AI-CFD) framework for optimizing heat transfer in magnetic bio-nanofluids subjected to external magnetic fields. Magnetic bio-nanofluids, composed of biocompatible base fluids containing superparamagnetic nanoparticles, exhibit tunable thermal and flow behavior, making them promising for biomedical and micro-cooling applications. Conventional optimization methods based on experiments or brute-force CFD are computationally expensive and limited in exploring the full design space. To overcome these challenges, an Artificial Neural Network (ANN) surrogate model was developed to predict two key performance indicators, the Nusselt number and the friction factor, with high accuracy (R² > 0.997). The surrogate …

Hybrid Experimental–Computational Study On The Energy Absorption Of Graphene Nanoplatelet-Reinforced Sandwich Structures, Hamdan Yousif Hamdan

Al-Esraa University College Journal for Engineering Sciences

Background: Sandwich composites are widely used in aerospace, automotive, and marine applications because of their lightweight, stiffness, and strength, but they remain prone to out-of-plane impacts and barely visible impact damage (BVID). Graphene Nanoplatelets (GNPs) have shown strong potential to improve fracture toughness and impact resistance. However, hybrid experimental–computational studies applying such reinforcement are still lacking in developing contexts like Iraq, where practical and accessible solutions are essential. Aims: The study investigates the effect of GNP reinforcement on the low-velocity impact behavior and energy absorption of glass fiber/epoxy sandwich panels with PVC foam and balsa wood cores. Objectives include fabricating …

Effect Of Thick Closed Walls Of West And South Elevations Of Iraqi Middle And South Territory Housing Building On Reducing Energy Use, Abeer Qasim Jbur, Shaimaa M. Hamza, Mayyadah Lutfi Abdulwahhab

Al-Esraa University College Journal for Engineering Sciences

Thermal insulation is one of the most important factors in achieving sustainability, increasing efficiency, and reducing energy consumption, but modern insulation materials are expensive, in addition to their availability. Therefore, through our research, we resorted to investigating the issue of reducing thermal load in buildings through the use of thick-walled facades in the southern and western facades, where we studied a building with two windows with windows on the southern and western facades and another without these windows and with thick walls, for two locations, the first in central Iraq, which is the city of Baghdad, and the second in …

The Impact Of Ethyl Levulinate Additive On Diesel Engine Performance And Emissions: An Experimental Study, Maha Ali Ghadbaan

Al-Esraa University College Journal for Engineering Sciences

This study explores the environmental and operational impact of adding Ethyl Levulinate—a biodegradable ester derived from biomass—to diesel fuel. A fuel blend known as B5El6 (comprising 5% biodiesel and 6% Ethyl Levulinate) was prepared and tested experimentally using a single-cylinder diesel engine operating at a constant speed of 1500 rpm under full load conditions. Performance metrics and emission data were recorded, and a Life Cycle Assessment (LCA) was conducted using the IMPACT2002+ methodology.

The results revealed that B5El6 significantly reduced greenhouse gas emissions (100 kg CO2 eq) and improved ecosystem quality. However, it presented challenges in terms of human health …

The Role Of The Scenario In Formulating The Contemporary Architectural Text, Rounaq Arif Mohsin, Abbas Ali Hamza, Bashar Shamil Alkhafaji

Al-Esraa University College Journal for Engineering Sciences

In order to create an integrated architectural text, which is a complicated art that blends beauty and practical elements, a rigorous design procedure is necessary. In this situation, the scenario’s role becomes crucial in developing the current architectural text and directing architectural approaches. In order to better understand how the scenario influences the design process and the interactions between various architectural aspects, this project intends to explore and analyze the impact of the scenario in developing and refining architectural text formulation approaches.

The study looks at the idea of a scenario and how it has been used in architecture, as …

Investigation Of Some Physical Properties Of Slurry Infiltrated Fibrous Concrete (Sifcon) Under Different Curing Times, Rand Kh. Mahmoud, Mohmmed Juad Khadhim, Fayq Hasan Jabbar

Al-Esraa University College Journal for Engineering Sciences

This research studied the effects of different types fibers (Basalt, Carbon and Basalt-Carbon hybrid mix) and curing ages (7, 14, 28 and 56 days) on some physical properties of - Slurry infiltrated fibrous concrete (SIFCON). Density, ultrasonic pulse velocity UPV, Poisson’s ratio and water absorption were measured for the experimental study with 30% cement replacement by Class F fly ash to increase sustainability. It was found that properties were significantly affected by the type and dosage of fiber admixture. The UPV was enhanced by basalt fibers and the absorption reduced up to an optimal range of 3–5% after which agglomeration …

Mechanical And Durability Properties Of Cement Panels Reinforced With Hybrid And Pva Fibers, Shukran H. Faraj, Mohammed J. Kadhim

Al-Esraa University College Journal for Engineering Sciences

This study examines the synergistic effects of hybrid fibers (HF) and polyvinyl alcohol (PVA) fibers on the structural and thermal properties of silica-fume cement panels. Scanning electron microscopy (SEM) was employed to examine mortar mixtures with varying fiber content to assess their enhancement of microstructure. We conducted several experiments on compressive, flexural, and splitting tensile strength, in addition to water absorption and thermal conductivity. The results indicate that 1% HF exhibits superior mechanical qualities, with a compressive strength of 46.89 MPa, a flexural strength of 8.56 MPa, and a reduced thermal conductivity of 0.83 W/m•K. PVA fibers at 2% enhance …

Experimental Analysis Of Droplet Deformation Dynamics In Combined Dc Electric And Shear Flow Fields Using Dpiv, Ayad Ibrahim Khlewee

Al-Esraa University College Journal for Engineering Sciences

This paper presented a systematic study of such droplet deformation at the intersection of uniform DC electric field and hydrodynamic shear flow, in which we focused on conductivity ratio (R) and permittivity ratio (S), describing their influence. The results demonstrate that droplet dynamics is extremely sensitive to the regime: under DC only, either elongation or compression depending on whether R > S or R S, similarly to classical EHD predictions. Under shear-only conditions, deformation was dictated by the balance of elongational stresses (EC) and rotational stresses (RC), with increasing capillary number (Ca) leading to progressive elongation and oscillatory orientation dynamics. When …

The Imaginary In Architecture: The Conceptual Structure Of The Imaginary And Its Manifestations In Architectural Text, Noora Ghadir Hlail, Abbas Ali Hamza Al Greiza

Al-Esraa University College Journal for Engineering Sciences

This study explores the concept of the imaginary as a collective cognitive and cultural structure that shapes symbolic reality through images, myths, and deeply rooted symbols in collective memory. The research applies this concept within the field of architecture, aiming to understand how the imaginary is embodied in architectural texts as symbolic carriers of identity and cultural meaning. Adopting a descriptive-analytical methodology, the study develops a theoretical framework comprising key components—preconditions, mechanisms, and traits of the imaginary—and applies it to two selected case studies: the General Secretariat of the Iraqi Council of Ministers and the Louvre Abu Dhabi Museum. The …