Materials Science and Engineering Commons^™

The Alloys Of Gallium And Indium, C. J. Adams

Bachelors Theses and Reports, 1928 - 1970

Thermal analysis VIPS used to construct cooling and heating curves from which the phase diagram was determined. The data for the entire set of cooling curves were obtained by the use of mercury thermo­meters.

Hot-Dip Aluminizing Of Low-Carbon Steels, Claude R. Barnes Jr.

Bachelors Theses and Reports, 1928 - 1970

In a relatively short period of sixty-five years, aluminum has grown to the rank of fifth in total weight of met­als produced in the world. Throughout its short life, aluminum has been found to have excellent corrosion-resistant properties; yet only in recent years has aluminum been under consideration as a corrosion-resistant coating for iron and steel.

The Electrolytic Polishing Of Steel In Solutions Of Sulphuric And Phosphoric Acids, Joseph W. Tripp

Bachelors Theses and Reports, 1928 - 1970

The process of cleaning and pickling the surfaces of steel objects by electrolytic methods has been known and applied since about 1920; the fact that under certain con­ditions these surfaces acquired a brilliant luster was noted as early as 1928.

An Isothermal Study Of An S.A.E. 6150 Steel, Tom Liss, C. Arentzen

Bachelors Theses and Reports, 1928 - 1970

The purpose of this thesis is to set forth the method followed, the laboratory procedure practiced, the results obtained, the conclu­sions drawn, and the recommendations proposed as a consequence of a metallographic study of the isothermal transformation of an S.A.E. 6150 steel.

Isothermal Transformation Of S.A.E. 6150 Steel By The Magnetic Permability Method, Richard R. Douglas

Bachelors Theses and Reports, 1928 - 1970

Since the purpose of this thesis is primarily to present an improved mechanical method for plotting isothermal transformations by means of differential mag­netic permeability between untransformed austenite and its ultimate transformation product.

A Preliminary Study Of The Benefication Of Montana Corundum, John L. Brown

Bachelors Theses and Reports, 1928 - 1970

The objective of this thesis was to affect an effic­ient and economical recovery of corundum. The corundum oc­curs as a crude ore admixed with quartz and other diluents. Yet, this material is a potential Montana resource of a val­uable non-metallic mineral. In view of the strategic import­ance and the relatively small production of this mineral in the United States, it seems advisable at this time in world affairs to investigate every possible source of this mineral.

The Renova "Syenite" Porphyry Madison County, Montana, James H. Clement

Bachelors Theses and Reports, 1928 - 1970

Unique feldspar porphyries, syenitic in appearance, and granitic in composition, form an unusually thick sill intrud­ing pre-Cambrian Belt graywacke about eight miles south of Whitehall in southwestern Montana. Commercial deposits of gold and silver ores occur nearby, and may possibly be genet­ically related to the porphyry, although direct association is not evident. The geologic age is believed to be late Cretaceous or early Tertiary, and the sill may be related to the Tobacco Root batholith.

A Study Of Some Pre-Cambrian Schists From Yankee Jim Canyon, Park County, Montana, Charles K. Presley

Bachelors Theses and Reports, 1928 - 1970

One of the most highly deformed metamorphic rock series in Montana is exposed fifteen miles north of Yellowstone Park, Wyoming in the great gorge known as Yankee Jim Canyon, which was formed by Yellowstone River at that point. These metamorphics are Pre-Cambrian in age, and are almost certainly sedimentary in origin, although the involved and intricate folding which they have undergone has long since obliterated any superficial traces of that origin.

The Lilly Mine Of Powell County, Montana, Wilbur Aikin

Bachelors Theses and Reports, 1928 - 1970

For many years the Elliston District, of Powell County has been a minor producer of gold, lead, zinc, and silver. Although never among the largest producing districts of the state, it has with the exception of the war years supplied a notable tonnage of ore to the neighboring mills ever since the first placer and lode claims were located there during the late eighteen hundreds.

Geology Of Smoke Hollow Area 8 Miles Southeast Of Deerlodge, Powell County, Montana, Floyd C. Bossard

Bachelors Theses and Reports, 1928 - 1970

This investigation was undertaken primarily as a problem in geologic mapping. The stratigraphy was studied as to the character, age, and sequence of the geologic formations that are exposed. The conclusions were based principally on the field relationships and lithology because no fossils were found.

Structure Of Southwestern Montana, Donald W. Levandowski

Bachelors Theses and Reports, 1928 - 1970

Intrusions of granitic rocks on a large scale are commonly found in the central part of folded mountain systems. Igneous rocks, intrusive and extrusive, are widespread in the mountains of southwestern Montana. An examination of the structural pattern of this area indicates that the fold trends form a radial pattern. How and why this pattern formed and its relation to the igneous activity in the area have not yet been discussed in the literature.

Basic Sills In Cottonwoood Creek Canyon, Jefferson County, Montana, Dale F. Kittel

Bachelors Theses and Reports, 1928 - 1970

A stratigraphic section of about 2600 feet of upper Beltian to lower Devonian formations exposed in Cottonwood Creek Canyon 11 miles east of Whitehall, Montana, contains about 20 igneous sills. These sills are from 5 to 20 feet thick, and grade from granogabbro to quartz basalt, except for one sill which is 165 feet thick, and is composed of granogabbro and red syenite. The whole sedimentary series is isoclinally folded, and the sills follow the bedding planes closely with localized crosscutting through the beds.

Was Assimilation Important In The Formation Of The Boulder Batholith?, Richard Marvin

Bachelors Theses and Reports, 1928 - 1970

Examination of a rock suite from the northern end of the Boulder batholith reveals that four of the eight criteria for assimilation as given by Grout are present. Thus, in the opinion of the writer, there is evidence and trends to signify assimilation, but no indication of the importance that it played in the formation of the Boulder batholith.

The Bighorn Mountains, The Little Rocky Mountains And The Bowdoin Dome Uplifts, E. J. O'Connell

Bachelors Theses and Reports, 1928 - 1970

The purpose of this paper is to secure an actual figure describing the amount of uplift in the Bighorn Mountains, the Little Rocky Mountains and the Bowdoin Dome. To the writer’s knowledge, the amount of uplift in the areas mentioned has not been determined before. Such a figure could be useful in structural studies of Montana and Wyoming, because the amount of uplift is a fair measure of the intensity of orogenic forces; also, the amount of uplift is a prerequisite to the determination of the amount of erosion.

An Investigation Into The Precipitation Of Copper From Mine Water By Cupric Copper Reduction, And The Subsequent Precipitation Of Copper As Cuprous Chloride, Jack T. Gentry

Bachelors Theses and Reports, 1928 - 1970

The objective of this thesis is to determine the possibility of applying a different method to the re­covery of the copper dissolved in the Butte mine waters, and thereby precipitate a purer cement copper with greater efficiency and less iron consumption.

An Experimental Study Of Crystallization In Opal Glass, William C. Rous

Masters Theses

"Opal glasses are well known from use in such forms as ointment jars, lighting globes, wall panelling [sic], and decorative effects in glass vases. Cryolite, fluorspar, and sodium fluosilicate are used in varying proportions in most glasses of this type. Since little is known of the mechanism of crystallization in opal glass, there is a definite need of gathering further information on this subject. This information is of particular interest to the manufacturers whose products consist of this type of glass. Further information would aid in control of the characteristics desired and perhaps would allow a more economical control"--Introduction, page …

A Study Of Missouri Flint Clay, Edmond Preston Hyatt

Masters Theses

"The problem is one of attempting to explain the peculiar nature of Missouri Flint Clay and to expand the knowledge concerning it. Among the questions for which answers are sought are: What makes Missouri Flint Clay so hard? What happens to Missouri Flint Clay when it is ground? What is the mineralogical constitution of Missouri Flint clay?"--Introduction, The Problem, page 1.

A Study Of Relative Ionic Mobility Of Alkali Ions In Dilute Alkali-Boron Trioxide Glasses As Deduced From Space Charge Considerations, Theodore J. Planje

Doctoral Dissertations

"The extensive investigations in the past have conclusively established that the alkali ions are responsible for the electrical conductivity of glass in both the brittle and viscous states; however, with the exception of one investigation in the brittle state, little consideration has been given to determination of the mobility of the alkali ion in such glassy systems. A review of the literature pertaining to the electrical conductivity of glass is presented.

A method, based on the rate of development of the ionic space charge responsible for polarization of conductivity cell employing direct current voltages, is proposed as a means for …

Purification Department Of Zinc Leaching Division At Anaconda, Montana, J. L. Brown

Bachelors Theses and Reports, 1928 - 1970

The original smelter, known as the Upper Works smelter, was located on the north side of the Warm Springs Creek, just 2 miles east of the city of Anaconda and 26 miles from the city of Butte. By the year 1894 this smelter had a capacity of 500 tons of ore a day.

The Vanadium Plant Of The Anaconda Reduction Works, Tom Liss

Bachelors Theses and Reports, 1928 - 1970

No complete history of mining and smelting will ever be written that does not include a major discussion of the Butte district. The colorful tale of this area plays a major role in the interesting stories of mining. In the fields of mining methods, labor relations end financial manipulations, the Butte area has set a standard.

The Christensen Sillimanite Deposit Southeast Of Dillon, Montana, Everett O. Bracken

Bachelors Theses and Reports, 1928 - 1970

The minerals sillimanite, kyanite, andalusite, dumortierite, and topaz comprise a group of minerals whose high alumina content and physical properties are particularly desirable in the manufacture of refractory products. Sillimanite is the least plentiful of the minerals of this group, and for this reason it is not used extensively at the present time. However, it would be very desirable to the refractory industry if a suitable domestic source of supply could be established.

A Study Of The Differential Seperation Of Galena And Sphalerite, Wilfred E. Nagel

Bachelors Theses and Reports, 1928 - 1970

The smelting of complex lead ores is a difficult operation, especially when they contain considerable amounts of iron and zinc. When these ores are smelted, all of the zinc, which is valuable and well worth recovering, goes into the slag. With the advent of the flotation processes, and the ability of these processes to concentrate the lead and zinc minerals into separate products, the smelting of complex lead ores was to a great extent simplified.

A Mineral Dressing And Economic Study Of A Complex Arsenical Ore, Luigi D. Piana

Bachelors Theses and Reports, 1928 - 1970

The factors that influence the choice of a method for treat­ment of an ore comprise the technical and economic limitations and advantages, derived in detail and balanced according to the exigencies of the particular situation.

Separation Of Cadmium From Zinc In The Purification Step Of The Leaching Cycle, L. C. Powell

Bachelors Theses and Reports, 1928 - 1970

The purpose of this investigation is to determine the effect of the factors listed previously by conducting a series of tests that will indicate the ex­tent to which the purification is influenced by time, temperature, zinc oust size, zinc dust quantity, iron concentration, two stage precipitation, and aeration.

An Investigation Of The Precipitation Of Cobalt With Zinc Dust, Lyle Hallberg

Bachelors Theses and Reports, 1928 - 1970

Cobalt, as well as copper, cadmium, and other impurities, is removed by selective precipitation with zinc during the zinc electrolyte purification cycle, and the purification residue may be treated by a Cadmium Plant for the recovery of cadmium.

Construction And Operation Of A Laboaratory Size Thum Cell, Raymond Dugdale

Bachelors Theses and Reports, 1928 - 1970

Electrolytic silver refining was not perfected until the end of the nineteenth century. During the process of development, two systems of silver refining have come into prominence: the Moebius and the Thum types.

An Investigation Of Silicon Impregnation Of Low-Carbon Steels, Thomas E. Groce

Bachelors Theses and Reports, 1928 - 1970

A problem of metallurgy during the last part of the Nineteenth and the early Twentieth Century, and one that stood very near the front, was investigations of methods to produce a non-corrosive surface on iron and steel without affecting the physical properties of these base metals.

A Study Of The Transformation Of A Twenty-Eight Per Cent Tin Bronze, Perry A. Boukind

Bachelors Theses and Reports, 1928 - 1970

In this investigation, attention is directed to the phases covered by a 28 per cent tin alloy. When the investigation was started, consideration was given to the possibility of making a Time - Temperature - Transformation curve for this parti­cular alloy. As the work progressed and further research was carried on, this phase of the work was abandoned.

Chromizing Of Steels, Edward Buchanan

Bachelors Theses and Reports, 1928 - 1970

In recent years, considerable thought and study have been given to the use of chromized articles in place of chromium stainless steel articles. The present extensive application of chromizing, indeed, helps greatly to conserve this valuable metal.

Caustic Leaching Of Montana Chromite, Chester Freshour

Bachelors Theses and Reports, 1928 - 1970

Chromite is the most important ore used for the production of chromium and chromium alloys. At present, the domestic production is insignificant as compared with the amount of chromite consumed in the United States.