Open Access. Powered by Scholars. Published by Universities.®
Engineering Science and Materials Commons™
Open Access. Powered by Scholars. Published by Universities.®
- Discipline
Articles 31 - 58 of 58
Full-Text Articles in Engineering Science and Materials
A Study On Supercapacitor Based On Aligned Carbon Nanotubes, Xiao-Yan Ye, Yan-Zhi Wang, Hai-Yan Song, Zhuo Sun, Pin-Gang He, Yu-Zhi Fang
A Study On Supercapacitor Based On Aligned Carbon Nanotubes, Xiao-Yan Ye, Yan-Zhi Wang, Hai-Yan Song, Zhuo Sun, Pin-Gang He, Yu-Zhi Fang
Journal of Electrochemistry
Large scale vertically aligned carbon nanotubes(ACNTs) with uniform length and diameter were prepared by the pyrolysis of iron(Ⅱ) phthalocyanine at low pressure.The ACNTs were activated by electrolyte-activation,acid-activation or electrochemical activation.The performance of the capacitor based on activated ACNTs was characterized by cyclic voltammograms which was of rectangular shape,impedence spectroscopy in which the phase is above 80° and the result specific capacitance was 16～32 F/g,which suggest that the ACNTs are the promising material for the supercapacitor.
Mechanism Of The Cathode Reduction Of Ti(Ⅳ) In Molten Na3Alf6-Alf3, Hai-Bin Sun, Xiu-Rong Zuo, Zhi-Guo Zhong, Xue-Hui Hu
Mechanism Of The Cathode Reduction Of Ti(Ⅳ) In Molten Na3Alf6-Alf3, Hai-Bin Sun, Xiu-Rong Zuo, Zhi-Guo Zhong, Xue-Hui Hu
Journal of Electrochemistry
The mechanism of TiO2 electrode process has been investigated by cyclic voltammetry and chronopotentiometry on the tungsten filament in molten Na3AlF6-AlF3 salts at 990 ℃.The experimental results showed that electrochemical reduction of Ti(Ⅳ) precede were two steps,firstly Ti(Ⅳ) was reduced to Ti(Ⅱ),then Ti(Ⅱ) was reduced to Ti,namely: Ti(Ⅳ)→Ti(Ⅱ)→Ti.
Electro-Chemical Oxidation Kinetics Of The V(Iv) In The Sulfuric Acid Solution, Yong-Lian Qiao, Qian Xu, Jie Zhang, Yu-Chun Zhai
Electro-Chemical Oxidation Kinetics Of The V(Iv) In The Sulfuric Acid Solution, Yong-Lian Qiao, Qian Xu, Jie Zhang, Yu-Chun Zhai
Journal of Electrochemistry
The electro-chemical oxidation kinetics for V(IV) in the sulfuric acid solution were investigated by cyclic voltammetry and steady state polarization curves at a graphite,platinum or conducting polymer electrode.Some kinetics parameters for the electrochemical reaction of V(IV) were calculated according to the Tafel curves.The results showed that the exchange current density and reversibility of V(V)/V(IV) redox reaction at the graphite electrode is largest among the three electrodes.There is the broadest extent of water stability and large oxidgen evolution potential when the conducting polymer was used as a working electrode in the solution of VOSO4(0.5 mol/L) and H2SO …
Preparation Of Manganese/Chromium Hexacyanoferrate Modified Glassy Carbon Electrode And Its Electrochemical Behavior, Sheng-Tao Zhang, Xiao-Yan Han, Ming-Yue Xue
Preparation Of Manganese/Chromium Hexacyanoferrate Modified Glassy Carbon Electrode And Its Electrochemical Behavior, Sheng-Tao Zhang, Xiao-Yan Han, Ming-Yue Xue
Journal of Electrochemistry
A film of poly(manganese/chromium hexacyanoferrate)(MnCrHCF)is formed on the glassy carbon electrode(GCE) by Cyclic Voltammetry scanning,and its electrochemical behavior was studied.Factors affecting the electro-deposition of the film such as pH values and sustaining electrolytes,were discussed.And mechanism of the reaction was investigated.
Study On The Electrogeneration And Properties Of Superoxide Ion In Aprotic Media By Using Carbon Nanotubes Powder Microelectrode, Ying-Liang Wei, Chen Shao, Hui Feng
Study On The Electrogeneration And Properties Of Superoxide Ion In Aprotic Media By Using Carbon Nanotubes Powder Microelectrode, Ying-Liang Wei, Chen Shao, Hui Feng
Journal of Electrochemistry
Multi-wall carbon nanotubes are filled in the cavity at the tip of a microelectrode to form a carbon nanotubes powder microelectrode(CNTs-PME).The CNTs-PME is used to study the electrochemical reduction of oxygen in aprotic media.It is a nearly reversible redox process of the O2/O2- couple at the CNTs-PME in the dimethyl sulfoxide(DMSO)solution.The heterogeneous electron transfer rate constant(ks)can be measured by steady-state voltammogram and the result is 9.8 10-3cm /s.As a weak oxidant,the reaction of O2- with epinephrine was studied by cyclic voltammetry.Additionally,the reaction of O2- with benzoic acid was also discussed …
Voltammetric Behavior And Electrocatalytic Properties Of Hemoglobin At Glassy Carbon Electrode Modified With Lauric Acid, Xin-Rui Miao, Xu-Hong Zhang, Ying Xie
Voltammetric Behavior And Electrocatalytic Properties Of Hemoglobin At Glassy Carbon Electrode Modified With Lauric Acid, Xin-Rui Miao, Xu-Hong Zhang, Ying Xie
Journal of Electrochemistry
The electrochemical behavior of hemoglobin at glassy carbon(GC)electrode modified with Lauric Acid was studied.In the potential of +0.6～-0.7 V(vs.Ag/AgCl),an irreversible cathodic peak was observed at-0.3 V at the scan rate of 20 mV·s-1.In the medium of 0.02 mol·L-1 KH2PO4-Na2HPO4(pH 7.0),ip increased with the increasing concentration of Hb and the value of pH.The peak currents were proportional to the concentrations of hemoglobin in the range of 1.00×10-8～5.00×10-9 mol·L-1 and 1.92×10-6～2.06×10-7 mol·L-1.The data was analyzed in details by simulating in order to …
Effects Of Direct Current Bias Potentials On Lipid Membranes Forming On A Glassy Carbon Electrode, Yu-Hui Li, Hong-Wei Zhang, Gui-Lan Song, Zhan-Jun Zhang, Sheng-Min Cai
Effects Of Direct Current Bias Potentials On Lipid Membranes Forming On A Glassy Carbon Electrode, Yu-Hui Li, Hong-Wei Zhang, Gui-Lan Song, Zhan-Jun Zhang, Sheng-Min Cai
Journal of Electrochemistry
The effects of direct current(DC) bias voltage on the structure of lipid membranes forming on a glassy carbon electrode(GCE) was investigated by cyclic voltammetry(CV) and electrochemical impedance spectroscopy(EIS).The experiment showed that the lipid membranes can be formed with either positive or negative bias potential exerted.When bias voltage was exerted,bilayer lipid membranes tended to form due to the electrostatic interaction between the superficial positive charges on the polarized electrode and the negative charged part of PC.When the positive bias voltage overrun the range,the lacunas on s-BLMs would increase,and the BLMs would be broken.A proper equivalent circuit was nonlinearly fitted,based on the …
Studies On Performance And Electrode Materials For All Vanadium Flow Battery, Jun Yuan, Qing-Chun Yu, Yi-Feng Liu, Liang-Liang Ma, Yi-Hua Wu
Studies On Performance And Electrode Materials For All Vanadium Flow Battery, Jun Yuan, Qing-Chun Yu, Yi-Feng Liu, Liang-Liang Ma, Yi-Hua Wu
Journal of Electrochemistry
In this paper,cyclic voltammetry has been used to study the electrochemical performance of the treated and untreated graphite,soft graphite and PAN-carbon cloth in vanadium sulfate solution.The results show that: the reversibility of reaction can be improved on the surface of treated electrode,and the current can also increase;the electrochemical performance of treated electrode is remarkably enhanced;in the process of charge/discharge,the charge current can reach up to 20 mA/cm2,and discharge current up to 15 mA/cm2;surface morphology of the treated and untreated graphite show that the treatment can change the surface structure of electrode and also add the reaction …
Investigation Of The Direct Electrochemical Reduction Of Cr2O3 Powder In Molten Cacl2 By A Metallic Cavity Electrode, Guo-Hong Qiu, Di-Hua Wang, Xian-Bo Jin, Xiao-Hong Hu, Zheng Chen
Investigation Of The Direct Electrochemical Reduction Of Cr2O3 Powder In Molten Cacl2 By A Metallic Cavity Electrode, Guo-Hong Qiu, Di-Hua Wang, Xian-Bo Jin, Xiao-Hong Hu, Zheng Chen
Journal of Electrochemistry
A metallic cavity electrode is used for further investigation of the electrochemical behaviour of Cr2O3 powder in molten CaCl2(Na: ~0.02% by mass,Mg: < 0.005% by mass) at 900 ℃.The Cr2O3 powder reduction mechanism was confirmed in line with EDX and SEM analysis of the potentiostatic electrolysis products.The correlations between the particle size of metallised product and the electrolysis potential,or electrolysis time were analysed.
Study On The Preparetion And Electrochemical Beavior Of Nitrogen Doped Tetrahedral Amorphous Carbon Electrode, Ke Liu, Guang-Fu Wang, Zheng-Hao Wang
Study On The Preparetion And Electrochemical Beavior Of Nitrogen Doped Tetrahedral Amorphous Carbon Electrode, Ke Liu, Guang-Fu Wang, Zheng-Hao Wang
Journal of Electrochemistry
taC∶N films are a good materials for semiconductor electrodes.But further studies are hampered by the ohmic contact problem,which occurs between the silicon and the lead.By studying the influence of heat treatment on the film's property,it is believed that ohmic contact should be made on the silicon first,and then the film be deposited.A set of taC∶N electrodes with various nitrogen content have been prepared.CV study indicates that the cathodic limits move slowly to positive direction.while the anodic limits are unchanged with the increasing of nitrogen content.As a result,the electrochemical windows get narrow either.
Mechanism Of Self Discharge Performance Improvement In The Ni-Mh Batteries With Naoh Electrolyte, Xiao-Feng Li, Tong-Chi Xia, Hui-Chao Dong, Yan-Wei Wei
Mechanism Of Self Discharge Performance Improvement In The Ni-Mh Batteries With Naoh Electrolyte, Xiao-Feng Li, Tong-Chi Xia, Hui-Chao Dong, Yan-Wei Wei
Journal of Electrochemistry
The self-discharge performance and charge efficiency at 60 ℃ for Ni-MH battery can be markedly enhanced by using NaOH electrolyte instead of KOH electrolyte.Both the results of electrochemical impedance spectroscopy and cyclic voltammetry tests indicate that the separation of H2 from the negative electrode may be partly blocked in the former because of the change of the adsorption/desorption behavior of H on the surface of the negative electrode,thus results in an improvement of self-discharge performance of the battery.
Electrochemical Oxidation Of Organic Additives In Tin Plating Electrolytes, Yin-Mei Cheng, Lan-Kun Cai, Qiang Song
Electrochemical Oxidation Of Organic Additives In Tin Plating Electrolytes, Yin-Mei Cheng, Lan-Kun Cai, Qiang Song
Journal of Electrochemistry
Cyclic voltammetry(CV) was used to characterize the voltammetric behaviours of organic additives, e.g. PSA(phenolsulfonic acid) EN(ethoxylatedα-naphthol) and ENSA(ethoxylatedα-naphthol sulfonic acid), on the anode surface. In PSA solutions, an anodic peak was obtained and the peak potential was about 1.2V. In EN and ENSA solutions, two anodic peaks were obtained and the peak potentials were about(0.95V) and 1.3V. The products of galvanostatic electrolysis were separated by HPLC(high performance liquid chromatography) and analyzed by EI/MS(electron ionizing mass spectrometry). The mechnism of the electrochemical oxidation was also disussed.
Surface-Enhanced Raman Spectra Of Cytosine Adsorbed On A Roughened Gold Electrode, Yuan-Fei Wu, Jian-Feng Li, De-Yin Wu, Bin Ren, Zhong-Qun Tian
Surface-Enhanced Raman Spectra Of Cytosine Adsorbed On A Roughened Gold Electrode, Yuan-Fei Wu, Jian-Feng Li, De-Yin Wu, Bin Ren, Zhong-Qun Tian
Journal of Electrochemistry
Cytosine adsorbed on a roughened gold electrode has been investigated by using electrochemical cyclic voltammetry and surface-enhanced Raman spectroscopy (SERS). The results indicate that cytosine was adsorbed on the Au electrode in a perpendicular orientation via the N3 position. As the maximum enhancement of ring breathing mode appears at negative potentials compared with other modes, both the electromagnetic enhancement and the charge transfer mechanism were considered to contribute to the SERS intensity. The binding interaction between cytosine and the gold electrode was weakened when the potential was negatively moved. The result also indicates that the SERS technique can be used …
The Fabrication And Electrochemical Studies On Carbon Nanotube Array Electrodes, Quan-Yong Gao, Jing Zhang, Yong Yang
The Fabrication And Electrochemical Studies On Carbon Nanotube Array Electrodes, Quan-Yong Gao, Jing Zhang, Yong Yang
Journal of Electrochemistry
An improved technique for fabrication of carbon nanotube array electrodes has been proposed in this work. Firstly, carbon nanotubes (CNs) array electrodes were prepared by combsination of Chemical Vapor Decomposition (CVD) method and sputtering techniques in anodized aluminum oxide (AAO) membrane. The CNs/AAO was immersed into HF solution to remove the barrier layer. Controlling the immersing time, the CNs array electrodes with different length contacted with electrolyte can be prepared. The morphology of CNs array electrodes was observed by SEM. The electrochemical properties of CNs array electrodes were investigated by cyclic voltammetry and electrochemical impedance spectroscopy. Cyclic voltammetric curves of …
Study On Electrochemical Performance Of Electroless Cobalt Coating For Microencapsution Of Hydrogen Storage Alloys, Tong-Chi Xia, Sheng-Li Zhang, Shu-Xin Wang, Kun Huang, Wen-Zeng Tian
Study On Electrochemical Performance Of Electroless Cobalt Coating For Microencapsution Of Hydrogen Storage Alloys, Tong-Chi Xia, Sheng-Li Zhang, Shu-Xin Wang, Kun Huang, Wen-Zeng Tian
Journal of Electrochemistry
The chemical cobalt plating method is used to treat on the hydrogen storage alloys. Effect of the surface treatment on the electrochemical performance of MH eletrodes was investigated by carrying out experimental methods of CV, AC and charge/discharge cycle tests. The results showed that after microencapsulation with cobalt, the impedance of electrochemical reaction on the surface and polarization during chare/discharge process was markedly decreased; and the electrocatalytic activity on the surface, discharge capacity, charge efficiency was improved. It was also indicated that the anode reaction of MH electrode treated was controlled by diffusion process.
The Electroless Plating Ni-Fe-P Alloy And Its Voltammetric Behavior, Sen-Lin Wang, Hui-Huang Wu
The Electroless Plating Ni-Fe-P Alloy And Its Voltammetric Behavior, Sen-Lin Wang, Hui-Huang Wu
Journal of Electrochemistry
Electroless Ni-Fe-P alloy deposition from an alkaline bath, containing sodium hypophosphite as reducer, boric acid as buffer agent and sodium citrate as complexing agent, was investigated. To increase the plating rate and to inprove the bath stability, the deposition parameters were optimized. The effects of process parameters (pH, temperature and mole ratio of [Fe2+]/([Ni2+]+[Fe2+]) on the plating rate and deposit composition were examined and it was found that the presence of ferrous sulfate in the bath has an inhibitory effect on the alloy deposition. As a consequence, the percentage of iron in the electroless …
Electrochemical Monitoring On The Deactivation Of A Metallic Oxide Anode, Li-Kun Xu, Shi-Zhe Song, Ting-Yong Wang, Guang-Zhang Chen
Electrochemical Monitoring On The Deactivation Of A Metallic Oxide Anode, Li-Kun Xu, Shi-Zhe Song, Ting-Yong Wang, Guang-Zhang Chen
Journal of Electrochemistry
The process of accelerated life test of an IrO2/Ta2O5 coated titanium anode was monitored using cyclic voltammetry and electrochemical impedance spectroscopy. The vatiation with electrolysis time of anodic voltammetric charge Q*, the double layer capacitance Cdl,the oxide film resistance Rf and the charge transfer resistance Rct for oxygen evolution was measured. A deactivation mechanism was proposed based on the observation results.
The Effect Of Calcium On The Properties Of Molybdenum Nitride Electrode, Yun-Gui Zhu, Xue-Liang Li, Dao-Rong Lu, Jian-Bo He, Ji-Huai Xia
The Effect Of Calcium On The Properties Of Molybdenum Nitride Electrode, Yun-Gui Zhu, Xue-Liang Li, Dao-Rong Lu, Jian-Bo He, Ji-Huai Xia
Journal of Electrochemistry
The effect of calcium on the properties of molybdenum nitride film electrode wasstudied by using XRD, SEM and cyclic voltammetry. The results show that the specific electriccapacity and the voltage operating range of electrode vary with the concentration of additive in thedipping solution. At the optimum concentration of additive in the dipping solution, the specificelectric capacity of the electrode is 2.1 times as large as that of the electrode prepared in the dipping solution without additive, and the voltage operating range of electrode is increased by 0.11 V. The active mechanism of calcium on the properties of film electrode suggested …
Electrochemical Characterization Of Ir-Ta-Ti Metal Oxide Coated Titanium Anodes, Ting-Yong Wang, Li-Kun Xu, Guang-Zhang Chen
Electrochemical Characterization Of Ir-Ta-Ti Metal Oxide Coated Titanium Anodes, Ting-Yong Wang, Li-Kun Xu, Guang-Zhang Chen
Journal of Electrochemistry
Ir-Ta-Ti metal oxide coated titanium anodes of variable composition were prepared by thermal decomposition. Their micro morphorogies and electrochemical properties were characterized by scanning electron microscope, open circuit potential, cyclic voltammetry, consumption rate measurements and accelerated life test. The SEM results indicated that all coatings were of a porous and cracked-mud microstructure influenced greatly by the composition of coatings. The electrochemical measurements showed that the Ir-Ta-Ti ternary oxide-coated anodes exhibited excellent electrochemical activity and electrochemical stability in both acidic media and seawater which were affected by the composition and microstructure of the coatings. Owing to good corrosion resistance and low …
The Electrochemical Behaviors Of Superoxide Dismutase At Promoter Modified Gold Electrode, Xia-Qin Wu, Xiao-Yun Meng, Zhe-Su Wang, Zong-Rang Zhang
The Electrochemical Behaviors Of Superoxide Dismutase At Promoter Modified Gold Electrode, Xia-Qin Wu, Xiao-Yun Meng, Zhe-Su Wang, Zong-Rang Zhang
Journal of Electrochemistry
The electron-transfer process of superoxide dismutase was investigated by cyclic voltammetry at the 4,4'-dithiodipyridine, L-cysteine, histidine and arginine modified gold wire electrodes repectively. The quasi-reversible behavior was observed at L-cysteine modified gold electrode. An irreversible electrochemical behavior has been observed at hisdinine modified gold wire electrode.
A New Method For Preparing Self-Assembled Lipid Bilayers On Pt Electrode, Peng Diao, Dian-Lu Jiang, Xiao-Li Cui, Deng-Ping Gu, Ru-Ting Tong
A New Method For Preparing Self-Assembled Lipid Bilayers On Pt Electrode, Peng Diao, Dian-Lu Jiang, Xiao-Li Cui, Deng-Ping Gu, Ru-Ting Tong
Journal of Electrochemistry
A new method for preparing Pt-supported bilayer lipid membrane (Pt-BLM) on Pt electrode cleaned by high power ultrasound was reported. The reported method was convenient, costing less platinum and could be used to form large-area Pt-BLM as compared with the traditional Pt-wire-cutting method. The electrical properties of Pt-BLM were studied using electrochemical impedance spectroscopy and cyclic voltammetry. Experimental results showed that the values of membrane capacitance and the voltammetric characteristics were consistent with those of Pt-BLM prepared by traditional method.
Electrochemical Synthesis Of Fes Electrode And Its Behavior Measurement, Cong-Sheng Guan
Electrochemical Synthesis Of Fes Electrode And Its Behavior Measurement, Cong-Sheng Guan
Journal of Electrochemistry
The Potential for the electrochemical synthesis of FeS electrode has been obtained by cyclic voltammetry. FeS electrodes were synthesiaed by controlling Fe electrode at -1.0 V in LiCl-KCl-Li2S and Li(FClI)-Li2S melts and their behavior were measured also. The FeS electrode synthesized in molten Li(FClI)-Li2S has the best charge and discharge properties.
The Study Of Poly [N-(3-Ferrocene Acetamino Propyl- Pyrrole] Film Modified Glucose Electrode, Cheng-Yun Tian, Jing Chen, Li Zhang
The Study Of Poly [N-(3-Ferrocene Acetamino Propyl- Pyrrole] Film Modified Glucose Electrode, Cheng-Yun Tian, Jing Chen, Li Zhang
Journal of Electrochemistry
A poly [N-(3-ferrocene-acetamino-propyl-pyrrole)] film modified electrode was fabricated and studied by cyclic voltammetric method. The result shows that the modified electrode can give stable redox peaks of ferrocene, and an obvious catalytic peak due to glucose. This modified electrode was used to tabricate a glucose sensor which operates at +0.2 V, so that the ascorbic acid or uric acid doesn't affect the accuracy detection of glucose concentration. The sensor has a linear range of 0.1～10 mmol/L glucose, which the period of long term stability and response time of the sensor are about ten days and 2 min.
Behavior Of Copper In Hydrogen Storage Alloy Microencapsulated By Copper, Dawei Zhang, Huatang Yuan, Huabin Yang, Zuoxiang Zhou, Yunshi Zhang
Behavior Of Copper In Hydrogen Storage Alloy Microencapsulated By Copper, Dawei Zhang, Huatang Yuan, Huabin Yang, Zuoxiang Zhou, Yunshi Zhang
Journal of Electrochemistry
Negative electrode made from Cu microencapsulated hydrogen storage alloy was studied by using cyclic voltammetry method. The results showed that copper as a coating material was of a certain stability in 5 mol/L KOH solution within the range of charge and discharge voltage. But when expanding the sweep voltage, the CV curve showed a pair of distinct oxidation reduction current peaks of Cu2O formation at E = -0.3 V and Cu2O reduction at E =-0.6 V. With charging discharging cycles, copper is liable to be oxidized to Cu2O and further oxidized into CuO2 …
Electrochemical Behavior Of Superoxide Dismutase On Gold Minigrid With Thin Layer Cell, Xiaqin Wu, Qian Liu, Bin Xu, Xiaoyun Men, Zongrang Zhang
Electrochemical Behavior Of Superoxide Dismutase On Gold Minigrid With Thin Layer Cell, Xiaqin Wu, Qian Liu, Bin Xu, Xiaoyun Men, Zongrang Zhang
Journal of Electrochemistry
The electrochemical behavior of superoxide dismutase (Cu, Zn-SOD) was investigated on gold wire electrode and gold minigrid with thin layer cell by cyclic voltammetry. A quasi reversible redox wave of SOD has obtained on gold minigrid thin layer electrode, but only oxidation peak has observed on gold wire electrode. The electrochemical reaction parameters, such as the formal potential E0′, diffusion coefficient D and standard rate constant k0′ were estimated.
Quantitative Evaluation Of Electrochemical Properties Of Mh Alloy By Powder Microelectrode, Ronghui Hu, Hanxi Yang, Jingcheng Liu, Shengxian Li, Chuanxin Cha
Quantitative Evaluation Of Electrochemical Properties Of Mh Alloy By Powder Microelectrode, Ronghui Hu, Hanxi Yang, Jingcheng Liu, Shengxian Li, Chuanxin Cha
Journal of Electrochemistry
In this paper, a quantitative method by use of powder microelectrode combined with cyclic voltammetry and galvanostatic step is described for studying the electrochemical performance characteristic of hydrogen storage alloy(MH). Since the powder microelectrode uses only MH powder and has its depth and diameter of several tens of micrometer, the ohmic and concentration ploarization are greatly reduced and the influences of the technical factors in electrode preparation on the material performance are simply eliminated. Thus, with accurate determination of the load quantity of MH alloy in power microelectrode by absorption spectrometric technique, it is feasible to evaluate quickly and quantitatively …
The Electrochemical Reduction Of 2-Ethylanthraquinone (2eaq), Yaobin Zhu
The Electrochemical Reduction Of 2-Ethylanthraquinone (2eaq), Yaobin Zhu
Journal of Electrochemistry
The process of electrochemical reduction of 2EAQ in DMSO is studied using CVand ESR methods in this work, Pt, Pd and some implanted materials are used as electrodes. The quasi-rever-sible property of two electron transfer steps and their following homogeneous chemical reactions are illustrated. The mechanism of the electrochemical red uction of 2EAQ and the kinetic parameters of the related steps are obtained. Having measured the influence of water content in the system, the effect of the proton donor is discussed. After comparising the experimental results with each other these experiments gives us the idea that the replacement of metal …
The Electrode Process Of Y(Ⅲ) On Copper Electrode And Its Surface Metallizing, Chungen Zhou, Shuzhen Duan
The Electrode Process Of Y(Ⅲ) On Copper Electrode And Its Surface Metallizing, Chungen Zhou, Shuzhen Duan
Journal of Electrochemistry
The reduction of yttrium ion on copper electrode in NaCl-KCl-YCl3 molten saltshas been investigated. The results indicate that the formation of intermetallic compounds is occuredbefore the metallic yttrium to be formed. The formation of intermetallic compounds is controlled bythe process of which yttrium atoms are diffusing into copper electrode. The kinetic characters todiffusion of yttrium atoms were also discussed.