Engineering Science and Materials Commons^™

Method Of Making Temperature-Immune Self-Referencing Fabry–Pérot Cavity Sensors, Hengky Chandrahalim, Jonathan W. Smith

AFIT Patents

A method of making passive microscopic Fabry-Pérot Interferometer (FPI) sensor includes forming a three-dimensional microscopic optical structure on a cleaved tip of an optical fiber that reflects a light signal back through the optical fiber. The reflected light is altered by refractive index changes in the three-dimensional structure that is subject to at least one of: (i) thermal radiation; and (ii) volatile organic compounds.

In Situ Characterization Of Tensile Behavior Of Laser Rapid Solidified Al–Si Heterogeneous Microstructures, Bingqiang Wei, Wenqian Wu, Dongyue Xie, Huai-Hsun Lien, Metin Kayitmazbatir, Amit Misra, Jian Wang

Department of Mechanical and Materials Engineering: Faculty Publications

Heterogeneous Al–Si microstructure comprising of sub-micron-scale Al dendrites and nanoscale Al–Si fibrous eutectic was fabricated by processing as-cast Al-20wt.%Si alloy using laser rapid solidification. In situ tension tests explored high tensile strength ( ∼ 600 MPa) and ductility ( ∼ 10%) and high strain hardening rate ( ∼ 7 GPa). Microstructural characterization revealed the plastic co[1]deformation mechanisms between soft Al dendrites and hard nanoscale Al–Si eutectic. The progression of plasticity in nanoscale Al–Si eutectic with increasing applied strain is accommodated by dislocation plasticity in the nano-Al channels and cracking Si nanofibers. The propagation of nano-cracks is suppressed by surrounding Al, …

Digitally Twinned Additive Manufacturing: Detecting Flaws In Laser Powder Bed Fusion By Combining Thermal Simulations With In-Situmeltpool Sensor Data, R Yavari, A Riensche, E Tekerek, L Jacquemetton, H Halliday, M Vandever, A Tenequer, V Perumal, A Kontsos, Z Smoqi, K Cole, P Rao

Department of Mechanical and Materials Engineering: Faculty Publications

The goal of this research is the in-situ detection of flaw formation in metal parts made using the laser powder bed fusion (LPBF) additive manufacturing process. This is an important area of research, because, despite the considerable cost and time savings achieved, precision-driven industries, such as aerospace and biomedical, are reticent in using LPBF to make safety–critical parts due to tendency of the process to create flaws. Another emerging concern in LPBF, and additive manufacturing in general, is related to cyber security – malicious actors may tamper with the process or plant flaws inside a part to compromise its performance. …

Influence Of Sulfur Modification On The Properties Of Sulfur Concrete, Zhavkhar Khayitova, Khasan Beknazarov, Hayit Turaev, Abdulakhat Jalilov

CHEMISTRY AND CHEMICAL ENGINEERING

The purpose of this study is the synthesis and study of modified sulfur concrete for use in industrial construction. To achieve this goal, sulfur concrete based on gossypol resin and pyrolysis distillate was modified and studied. The strength properties of sulfur-based concrete obtained from sulfur modified with gossypol resin and pyrolysis distillate were investigated. For the addition to sulfur concrete, industrial waste was used as a finely dispersed filler - fly ash from the Angren TPP and phosphogypsum generated at Ammophos-Maxam JSC. It was found that the best strength results correspond to sulfur-based concrete modified with gossypol resin using an …

Transforming Technology & Engineering Educator Inputs Into Desired Student Outputs Through Mechanism Analysis And Synthesis, Andrew J. Hughes, Chris Merrill

Educational Leadership & Technology Faculty Publications

The intention of this article is to provide middle and high school Technology and Engineering Educators (T&EEs) with a more thorough understanding of an engineering approach to the teaching and learning of mechanics. During the teaching and learning of engineering content, in this case mechanics, the educator should attempt to align pedagogical content knowledge with engineering content knowledge and practices. T&EEs will also need to focus on terminology, structure, and applying theory to practical hands-on learning activities inside and outside of the classroom. T&EEs have the potential to foster middle and high school students’ mechanical knowledge and the ability to …

Me-Em 2020-21 Annual Report, Department Of Mechanical Engineering-Engineering Mechanics, Michigan Technological University

Department of Mechanical and Aerospace Engineering Annual Reports

Table of Contents

• Responsive Research
• Alumni Impact
• Innovative Enterprises
• Enrollment & Degrees
• Graduates
• Department
• Donors
• Contracts & Grants
• Patents & Publications

Me-Em Enewsbrief, September 2021, Department Of Mechanical Engineering-Engineering Mechanics, Michigan Technological University

Department of Mechanical and Aerospace Engineering eNewsBrief

No abstract provided.

Justification Of The Main Parameters And Operating Modes Of The Crushers-Shredders Of Coarse Feed, K.D. Astanakulov, F.U. Karshiev, Sh.Kh. Gapparov

Irrigation and Melioration

The article presents the results of research on the justification of the parameters of the working bodies and operating modes of the mini crushers-shredders of coarse feed. On the basis of experimental research to study the effect of the rotor parameters Mini Crusher its qualitative performance indicators. According to the teachings found that rational parametres and operating modes-Crusher are: rotor length 350 mm; rotor diameter 550 mm; rotor speed 1290 min-1; the number of hammers 20 pcs; angle of rotation of the hammers 60.

Plan Dimensions Of The Flow Confinited By Cross Dams, On Rivers With Non-Symmetric Flooring, M.R. Bakiev, U.A. Kahhorov, A.А. Jakhonov

Irrigation and Melioration

Improving methods and technologies for calculating and designing floodplain transverse dams, taking into account the interaction of floodplain and riverbed flows to protect the banks from erosion and regulate riverbeds is one of the most important tasks. At the same time, the priority remains the transverse blind dams made of local soil with the attachment of their head. Their construction on rivers with two-sided asymmetric floodplains has its own characteristics, which consist in the need to take into account the morphology, the different roughness of the floodplain and the channel, the interaction of floodplain and channel flows, the asymmetry of …

Study Of Performance Of Vertical Drainage Well Construction From Polymer Materials, I.A. Akhmedov, Z.K. Mirkhasilova

Irrigation and Melioration

The article is devoted to the reconstruction and construction of vertical drainage wells. The use of vertical drainage wells is characterized by a decrease in the level of groundwater. The article presents data and typical regions of the use of vertical drainage wells.Also presented are mechanical, physical and chemical methods of well cleaning in practice. The information on the design and construction of vertical drainage wells is described. The analysis of corrosion resistance of vertical drainage well materials and their service life has been carried out. It is known that polymeric materials are resistant to corrosive environments. Using filters made …

Results Of Software Modeling Flow Section Of Vane Pumps, О.Я. Гловацкий, R.R. Ergashev, A.A. Abdullaev, J.I. Rashidov

Irrigation and Melioration

The article presents an analysis of data on the flow movement in a centrifugal pump, the results of which are aimed at improving the pump design in the direction of ensuring the flow of the flow without resistance to achieve energy savings in water transmission. To reduce slip on the pumps and to reduce the resistance to current flowing inside the pump to achieve energy savings, working impeller and spiral chamber shape are designed to be constructively correct. Data from pumping stations show that the performance of pumping equipment reduces water consumption by 10-12%, pressure by 18-20% and service life …

Economic Assessment Of A New Energy-Saving Electrical Technology For The Anesthesia Of Silkworms, O.A. Khaliknazarov, A.A. Turdiboev, D.M. Akbarov, D.M. Akbarov

Irrigation and Melioration

The article provides information on the role of Uzbekistan in the world in the field of cocoons, the analysis of cocoon cultivation and primary processing technologies, technologies and technical devices currently used in primary cocoon processing. Suggestion of the use of ultra-high frequency (UV) electromagnetic field in the anesthesia of mulberry silkworm, technical specifications of the electrotechnical device for anesthesia of mulberry silkworm using ultra-high frequency (UV) electromagnetic field, and the implementation of this device SK-150K pilons The cost-effectiveness of the device was assessed, the cost-effective method achieved as a result of the research work is highlighted. According to the …

Main Directions Of Food Security In Uzbekistan (The Case Of Samarkand Province), F.J. Saydullaeva

Irrigation and Melioration

The article assesses food availability as one of the indicators of food security on the example of Samarkand region based on a comparative analysis of the state of agricultural food production over the years and the volume of products per capita and their compliance with established recommended consumption norms. Based on the analysis, the results show that in Samarkand region in 2016-2020, agricultural food products were produced over recommended consumption norms per capita. The periodic evolution of the types of agri-food products produced by dehkan farms and owners of household land increased by 7.1% decreased by 7.3% on private farmers. …

The Economic Assessment Of Factors Affecting Small Household(Tomorka) In Rural Areas And Their Income, Sh.A. Muratov

Irrigation and Melioration

In this research, the role and importance of income from small householding(tomorka) in rural areas, its specific features are analyzed. Economic factors were assessed through the tobit regression model of the factors influencing the formation of income from small households (tomorka) activities, and VIF (Variance inflation factor) test was conducted to determine their multicollinearity. Anonymous surveys of 170 landowners in 4 districts of Samarkand region have been used in the analysis. The age of landowners, the area of arable land, the consumption of organic and mineral fertilizers, the cost of seeds and seedlings, the cost of preparing the field for …

Analysis Of The Possibility Of Increasing The Degree Of Zinc Waelz And Reducing Metal Losses During Waelz, Bakhriddin Tilovkabulovich Berdiyarov Dr.

Technical science and innovation

The article examines the flow process of zinc cakes, which is formed during the selective melting of zinc burns, and the factors influencing it. The effects of silica and calcium oxide on the combustion of coke added to the Welting process were analyzed. When the kinetic kinetics of zinc ferrites and silicates present in zinc cakes are studied, the addition of lime to the strategy promotes the thermodynamic recovery of zinc and reduces graphite consumption.The article also examines the temperature dependence of the rate of reduction reactions of zinc silicate and zinc oxides. Studies of the kinetics of coal-thermal reduction …

Effects Of Fiber Clustering On Fatigue Behavior Of Steel Fiber Reinforced Concrete Beams, Danying Gao, Zhiqiang Gu, Congjie Wei, Chenglin Wu, Yuyang Pang

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This paper investigated the effects of fiber clustering on fatigue behavior of steel-fiber-reinforced concrete (SFRC) beams with reinforcements by experimental and numerical analysis. The steel fiber volume fractions of beams were 0 vol%, 0.5 vol%, 1.0 vol%, and 1.5 vol%. One beam was tested under static loading, and eight beams under fatigue loading with different stress levels. Moreover, the fiber distribution in the cross section of concrete was experimentally characterized to understand the underlying mechanism. The results indicated that the fatigue life of beam increased with increasing fiber volume fraction from 0 to 1.0 vol% and decreased from 1.0 vol% …

3d Printed Concrete & Polymer Concrete For Infrastructure Applications, Daniel Heras Murcia

Civil Engineering ETDs

Additive manufacturing technology has been established as one of the fastest-growing building technologies worldwide. Three-dimensional concrete printing (3DCP) has developed an increasing interest in the last decade due to its prospects as a transformative technology for industries such as the concrete precast. Besides the improvements in automation technologies in construction, traditional construction has faced considerable challenges: high accident rates, labor dependency, significant potential for automation, and high costs associated with the use of traditional formwork. In this context, three-dimensional concrete, also referred to as physical prototyping, is a novel construction technique in which the concrete is extruded layer-to-layer. 3DCP is …

Uzbekistan Road Climate-Conditions For Laying A Mixture Of Hot, Coarse-Grained Porous Asphalt Instead Of A Mixture Of High Porous Asphalt With Hot, Coarse-Grained Crushed Stone For Regions, S.Z. Kurbonov

The Scientific Journal of Vehicles and Roads

The article presents the differences in the application of hot large-grain crushed stone high-porous asphalt concrete mixture and hot, large-grain porous asphalt mixture in Asphalt Paving and road paving construction. The properties of these two types of mixtures, their importance in road junction construction and their feasibility were compared.

Reducing The Impact Of Heavy-Weight Cars On The Deformation Of Asphalt Concrete Coatings, I.S Sodiqov, A.M Qoraboyev, F.B. Ashurov

The Scientific Journal of Vehicles and Roads

Article showcase transport is a tool influencing the carving of kolasgii shik is recommended by ishlab chikilgan. Master transport toolkit uchun minimal tsliklar ishlab chikilgan. "Superpave" tizima Republic of Uzbekistan review meteorlik stationyalarda uzakrdonidli kuzatishlar natijalaran climatimiy obrazovannyfan foidalanib, Uzbekistan erogen yulladalamisining extreme the most famous moral, in taular (PG) bulibliblib, tour now. Odinda kunning is precisely known as the pastime of Amir car kunning avatlanishiga Odinga chekllar Zhorin ethildi.

Molecular Dynamics Simulations Of Self-Assemblies In Nature And Nanotechnology, Phu Khanh Tang

Dissertations, Theses, and Capstone Projects

Nature usually divides complex systems into smaller building blocks specializing in a few tasks since one entity cannot achieve everything. Therefore, self-assembly is a robust tool exploited by Nature to build hierarchical systems that accomplish unique functions. The cell membrane distinguishes itself as an example of Nature’s self-assembly, defining and protecting the cell. By mimicking Nature’s designs using synthetically designed self-assemblies, researchers with advanced nanotechnological comprehension can manipulate these synthetic self-assemblies to improve many aspects of modern medicine and materials science. Understanding the competing underlying molecular interactions in self-assembly is always of interest to the academic scientific community and industry. …

Evaluation Of Additively Manufactured Lattices Under High Strain Rate Impact, Derek G. Spear

Theses and Dissertations

Several additively manufactured lattice designs and configurations were evaluated under compression loads under various strain rates from quasi-static to highly dynamic. These experiments examined how the mechanical behavior of the lattice changed based on the lattice design properties and the applied strain rates. The modulus of elasticity, yield strength, plateau stress, and toughness were observed to decrease with an increase in strain rate, revealing that the lattice designs exhibit a negative strain rate sensitivity. A new lattice flow stress model was developed to account for the mechanical response of the lattice and was incorporated into a computational model for simulation. …

Contact Angle Measurement Using A Hele-Shaw Cell: A Proof-Of-Concept Study, Haipeng Zhang, Jacob Gottberg, Sangjin Ryu

Department of Mechanical and Materials Engineering: Faculty Publications

Contact angle is an important property to quantify the wettability of a solid surface with a liquid, which characterizes interactions of the solid-liquid pair. Generally, to measure contact angle, special instruments such as a goniometer are necessary, but they are not readily available in certain research settings. In this study, an alternative method to measure contact angle based on a Hele-Shaw cell, microscopy imaging, and image processing is suggested. In this method, a liquid drop is injected into a transparent Hele-Shaw cell, the meniscus of the drop is captured in the top or bottom view using a brightfield microscope, and …

Dft Study Of NiM@Pt1AuN-M-1 (N=19, 38, 55, 79; M = 1, 6, 13, 19) Core-Shell Orr Catalyst, Wen-Jie Li, Dong-Xu Tian, Hong Du, Xi-Qiang Yan

Journal of Electrochemistry

The slow kinetics of oxygen reduction reaction (ORR) limits the performance of low temperature fuel cells. Thus, it needs to design effective catalysts with low cost. Core-shell clusters (CSNCs) show promising activity because of their size-dependent geometric and electronic effects. The ORR activity trend of Ni_m@Pt₁Au_n-m-1(n = 19, 38, 55, 79; m = 1, 6, 13, 19) was studied using the GGA-PBE-PAW methods. The adsorption configurations of *O, *OH and *OOH were optimized and the reaction free energies of four proton electron (H⁺ + e^-) transfer steps …

One-Pot Synthesis Of Fe2O3@Fe-N-C Oxygen Reduction Electrocatalyst And Its Performance For Zinc-Air Battery, Hua Lin, Yi-Jin Wu, Jun-Tao Li, Yao Zhou

Journal of Electrochemistry

Oxygen reduction reaction (ORR) plays a profound role in determining cathode performance in metal-air batteries and fuel cells. Owing to its inherently sluggish kinetics, high-performance ORR catalysts which favors the scissoring of O-O bond and formation of O-H bond are a requisite. In this regard, Pt has been explored as the most efficient ORR electrocatalysts. Nevertheless, due to its expensiveness, the usage of Pt catalysts represents one of the major sources of cost in those energy conversion devices. Thus, the development of alternative ORR electrocatalysts with minimized Pt utilization has been widely pursued over the past few decades. Metal-nitrogen-carbon catalysts …

Study On Mxene-Carbon Black/Sulfur Composite In Integrated Electrode Of Lithium-Sulfur Batteries, Ye-Peng Fan, Ye-Qiang Luo, Pei-Kang Shen

Journal of Electrochemistry

Lithium-sulfur (Li-S) batteries are considered as a promising energy storage device due to their ultrahigh theoretical energy density of 2500 Wh·kg^-1 and low cost. However, the practical application of Li-S batteries is seriously limited by their low actual energy density, the shuttle effect of polysulfides (LiPSs), and the insulating nature of sulfur and lithium sulfides. Carbon materials have been developed in the design of sulfur hosts due to their adjustable pore structure and high electrical conductivity, but their non-polar surfaces have weak interactions with LiPSs. Herein, MXene-carbon black/sulfur (Ti₃C₂T_x-CB/S) composites were prepared and …

Preparation And Electrochemical Evaluation Of Mos2/Graphene Quantum Dots As A Catalyst For Hydrogen Evolution In Microbial Electrolysis Cell, Hong-Yan Dai, Hui-Min Yang, Xian Liu, Xiu-Li Song, Zhen-Hai Liang

Journal of Electrochemistry

Microbial electrolysis cell (MEC) is a relatively new bioelectrochemical technology that produces H₂ and meanwhile treats organic wastewater. Cathode hydrogen evolution catalyst plays a key role in MEC. The doping of Graphene Quantum Dots (GQDs) into MoS₂ nanosheets can improve the catalytic activity of MoS₂ by creating abundant defect sites both in the edge plane and the basal plane, as well as enhancing the electrical conductivity. In this paper, using Na₂MoO₄ , cysteine and GQDs as raw materials, a series of MoS₂/GQDs composites were firstly synthesized via hydrothermal method, and then loaded …

A Preliminary Study On Graphene Film-Metal Composites Prepared By Electrodeposition, Shuang-Juan Liu, Hai-Jing Wang, Jing Guo, Peng-Cheng Wang, Hao Zhou, Cai Meng, Han-Jie Guo

Journal of Electrochemistry

Graphene film (GF) has excellent electrical and thermal conductivity, but low strength and hardness. In order to obtain good comprehensive mechanical properties to improve the practical value of GF, the concept of preparing GF-metal composite materials was proposed. This work was conducted to preliminarily study the feasibility of using electrodeposition method to prepare GF-metal composites. Two kinds of composites, GF-Cu and GF-Cr, were successfully prepared by using GF as the cathode, and pure Cu and DSA (Dimensionally Stable Anode) as the anodes, respectively, with applying DC power externally. Employing certain electrochemical parameters, the cation in the electrolyte moved towards the …

Preparation Of 3d Semi-Interpenetrated Polymer Networks Polymer Electrolyte For Lithium Metal Battery, Yun-Feng Zhang, Jia-Ying Wang, Xiao-Jie Li, Shi-Yu Zhao, Yang He, Shi-Kang Huo, Ya-Ying Wang, Chang Tan

Journal of Electrochemistry

As the next generation high-energy batteries, lithium metal battery has attracted more and more attention due to its highest specific capacity (3860 mA·h·g^-1) and the lowest anode potential (-3.04 V versus the standard hydrogen electrode, SHE). However, the safety problem caused by lithium dendrite growth is one of the biggest challenges for the commercialization of lithium metal batteries. Single ion conducting polymer electrolytes, which deliver high lithium ion transference number, represent one of the important strategies to inhibit lithium dendrite growth. However, the poor compatibility with electrodes and low ionic conductivity largely limit their practical application. In the …

Study On Inhibition Of Lithium Dendrite Growth By Mg(No3)2 Additive In Carbonate Electrolyte, Biao Zhang, Yi Shuai, Yu Wang, Na-Chuan Yang, Kang-Hua Chen

Journal of Electrochemistry

In the lithium-sulfurized polyacrylonitrile battery system, the formation and growth of lithium dendrites in the negative electrode seriously deteriorate the charge and discharge performance of the battery. If the growth of lithium dendrites pierces the separator and causes thermal runaway, it will also bring serious damage to the battery, causing potential safety risks. In the carbonate electrolyte that is more conducive to stabilizing the positive electrode sulfurized polyacrylonitrile material, the growth of lithium dendrites is particularly serious. In this paper, magnesium nitrate was added to the carbonate electrolyte to investigate the combined effect of nitrate and magnesium ions on the …

A Comparison In Structural Transformation Of Li[NiXCoYMnZ]O2 (X = 0.6, 0.85) Cathode Materials In Lithium-Ion Batteries, Li-Juan Li, Zhen-Dong Zhu, Juan Dai, Rong-Rong Wang, Wen Peng

Journal of Electrochemistry

In this paper, the phase transformation voltage ranges of two layered oxide ternary cathode materials, namely, Li(Ni_0.85Co_0.10Mn_0.05)O₂ (referred to Ni85, presenting high Ni content) and Li(Ni_0.6Co_0.2Mn_0.2)O₂ (referred to Ni60, presenting common low Ni content), were classified and determined. The structural differences between high Ni and common low Ni ternary materials were studied in order to understand the structure instability of high nickel material during the charging process. At the same time, the differential capacity (dQ·dV^-1) curves of Ni85 and Ni60 positive …