Engineering Science and Materials Commons^™

Laser Ablation Behavior And Ablation Threshold Of Entropy-Controlled Perovskite Coatings, Shuo Wang, Junyang Lu, Mengqing Zhang, Jiayi Zheng, Tong Zhang

Journal of Metals, Materials and Minerals

The protection threshold of laser ablation resistant materials lags behind the development of laser power density. Single-functional laser ablation resistant materials can no longer meet the practical needs. High-entropy perovskites with infinite chemical composition, tunable bandgap structure, and efficient thermal management capabilities provide new ideas for developing novel high-reflectivity and low-thermal-conductivity multifunctional laser ablation resistant materials. Herein, leveraging these unique advantages of high-entropy perovskites in optics and thermodynamics, four entropy-controlled perovskite coatings, Ba(Zn1/2Ta1/2)O3 (BZTO), Ba(Zn1/3Ta1/3Nb1/3)O3 (BZTNO), Ba(Zn1/4Ta1/4Nb1/4Ti1/4)O3 (BZTNTO) and Ba(Zn1/5Ta1/5Nb1/5Ti1/5Zr1/5)O3 (BZTNTZO) are designed. Through time-dependent laser ablation experiments, the optical and thermal properties are comprehensively evaluated. And laser ablation behavior …

Downstreaming Of Natural Materials Huta Ginjang Quartz Sand Doped With Nd2o3 For Laser Medium Application, Juniastel Rajagukguk, Jakrapong Kaewkhao

Journal of Metals, Materials and Minerals

The QSBoBa glasses with chemical formula 10 Quartz sand + (50-x) B2O3 + 10BaO + 30Na2O + xNd2O3 (x = 0, 0.5, 1, 1.5, and 2 mol%) were prepared by a conventional melt-quenching technique. The successfully fabricated glass samples will be analyzed based on their physical, structural, optical and luminescent properties. The XRD and FTIR spectra have been included to observe the complete structural properties. Optical absorption spectra revealed several characteristic transitions, with a prominent hypersensitive transition 4I9/2→4G5/2 at 584 nm, indicating an increasing asymmetry and disorder at higher Nd3+ concentrations. The photoluminescence emission spectra demonstrated strong radiative transitions of …

Crack Development Of Electroplated Niw Alloys And Their Wettability And Tribological Properties, Jidsucha Darayen, Suwat Ploypech, Martin Metzner, Claudia Beatriz Dos Santos, Petch Jearanaisilawong, Yuttanant Boonyongmaneerat

Journal of Metals, Materials and Minerals

This study investigates how sodium tungstate concentration (20–46 wt.%) and current density (40–60 A/dm²) affect the microstructure, wettability, mechanical properties, and tribological behavior of electrodeposited Ni-W coatings. Results show that increasing current density markedly raises crack density (from <100 to >400 cracks/cm²), while tungstate concentration has minimal effect. XRD confirms Ni-W solid solution formation, with higher tungsten content refining grains and increasing hardness—peaking at 900 HV at 50 A/dm² (an 80% rise from 500 HV at 40 A/dm²). However, excessive stress at 60 A/dm² leads to microcracking and hardness plateauing (~650–700 HV). Higher crack density improves wettability (contact angle ~17°), enhancing lubricant …

Upcycled Waste-Derived Triboelectric Nanogenerator For Sustainable Energy Harvesting, Archana Panda, Basanta Kumar Panigrahi, Subhendu Pati, Sunit Gourav Mohanty, Kushal Ruthvik Kaja

Journal of Metals, Materials and Minerals

The proliferation of disposable paper-based materials in laboratories has raised significant environmental concerns due to their rapid discard and accumulation. This study explores the upcycling of commonly discarded laboratory waste, specifically butter paper and polyurethane (PU) foam, into a single-electrode triboelectric nanogenerator (TENG) for mechanical energy harvesting. The fabricated device employs butter paper as the positive triboelectric layer and PU foam as the negative layer, with an aluminium tape electrode. Electrical tests reveal a peak voltage of 21 V and current of 47 nA, reaching a maximum power of 438 nW at 500 MΩ load. The TENG demonstrates stable performance …

The Effects Of Starting Microstructure On The Results Of Double Intercritical Annealing Process Of 0.107%C-2.39%Mn-0.453%Si Dual Phase Steel, Wichayut Chumoung, Nithi Saenarjhan

Journal of Metals, Materials and Minerals

This study investigates and compares the effects of the starting microstructure on the double intercritical annealing (DIA) process on the microstructure and mechanical properties of 0.11%C-2.39%Mn-0.45%Si dual phase steel. The specimens were austenitized, followed by water quenching (WQ) or air cooling (AC), then DIA at 730°C. For the WQ method, high cooling rate results in the formation of a high strength martensitic structure. Conversely, AC method yields a moderate cooling rate, forming a bainitic structure. After single intercritical annealing (SIA), the microstructure transformed into ferrite and martensite. WQ method specimens contain high stress concentration, leading to earlier recrystallization compared to …

Effects Of Thickness On The Performance Of Sno2 Gas Sensors Using Low-Temperature Co-Fired Ceramic, Montri Aiempanakit, Kittiyaporn Singsumphan, Chutima Nakmuk, Cheewita Suwanchawalit, Manatsawee Srirak, Kata Jaruwongrungsee, Anurat Wisitsoraat, Monrudee Liangruksa, Chawarat Siriwong

Journal of Metals, Materials and Minerals

This study develops SnO2-based gas sensors integrated with a low-temperature co-fired ceramic (LTCC) micro hotplate for ethanol detection. SnO2 nanoparticles were synthesized using a simple precipitation method, and sensing layers with varying thicknesses around 0.24 µm, 0.71 µm, and 1.20 µm were applied to evaluate their influence on performance. The results show that the optimal configuration is a 0.71 µm layer, offering high sensitivity, fast response, and efficient recovery. Operating at a low voltage of 3.2 V, the sensors exhibit low power consumption, suitable for portable and battery-operated applications. The gas-sensing mechanism relies on changes in resistance due to interactions …

Atmospheric Corrosion Of Hot Dip Galvanized Structural Steel Exposed To The Tropical Climate Of Thailand, Adithep Bunphot, Pakawat Sancharoen, Somnuk Tangtermsirikul, Taweep Chaisomphob

Journal of Metals, Materials and Minerals

Hot dip galvanized steels were tested in the atmospheric tropical climate environments of Thailand for 12 month from March 2021 to March 2022. Three locations were studied, i.e. a rural area at Saraburi in the central part, an industrial area at Chonburi in the eastern part, and a coastal/urban area at Songkhla in the southern part of Thailand. The thickness loss of the galvanized steel samples was measured by the weight loss method. Types of corrosion products observed on the samples were zincite, wulfingite, hydrozincite, and simonkolleite. All of them were found on the sample at Songkhla. Three of them, …

Lactic Acid-Assisted Complexation For Enhanced Lithium Extraction And Its Application To Spent Libs, Sibananda Sahu, Niharbala Devi

Journal of Metals, Materials and Minerals

A novel approach for complexing lithium with lactic acid to enhance extraction efficiency and its application to spent LIBs was proposed in this study. Key parameters influencing the extraction were systematically examined, including lactic acid concentration, pH of the aqueous phase, concentration of extractant, diluent selection, phase ratio between organic and aqueous phase, and stripping efficiency. Lithium extraction showed a remarkable improvement, rising from 16% to 43%, as the lactic acid concentration enhanced from 0.01 mol∙L‒1 to 1.0 mol∙L‒1. This was achieved using D2EHPA (0.1 mol∙L‒1)  at a maintained pH of 6.5. Maximum lithium extraction of 84.5% was observed at …

Development Of Ceramic Based Novel Materials For Application In Low Temperature Solid Oxide Fuel Cell (Ltsofc) – A Critical Review, Kaliappan Tamilselvan, Arputharaj Samson Nesaraj

Journal of Metals, Materials and Minerals

In the field of renewable energy, fuel cell research has emerged as a promising source of energy for the future. Fuel cells utilize fuels more efficiently compared to other energy generation systems. Solid oxide fuel cell (SOFC) systems are gaining prominence due to their applications in military operations, mobile power supplies, and stationary power generation. Significant research efforts are being made to lower the operating temperature of SOFCs from 1000℃ to approximately 600℃, leading to the development of low-temperature solid oxide fuel cells (LTSOFCs). This is being achieved by selecting alternative electrode and electrolyte materials, particularly ceramics, to enhance their …

The Effect Of Asphalt Emulsion On The Properties Of Fly Ash Based Geopolymers, Natcha Prommityat, Chiravoot Pechyen, Pitak Laoratanakul, Benya Cherdhirunkorn

Journal of Metals, Materials and Minerals

This research aimed to study the effect of asphalt emulsion (AE) on the properties of fly ash based geopolymers. Solid waste materials used for the production of geopolymer were coal fly ash (FA) 70 wt% and bagasse ash (BA) 30 wt%. Alkaline solution used for the geopolymerization reaction was the mixture of 10 M NaOH and Na2Sio3

with the ratio of 1:2. The liquid and solid (L/S) ratios of 0.6, 0.7 and 0.8 were prepared. The AE of 1 wt%, 3 wt% and 5 wt% were added into the raw materials mixtures. Then, the mixed slurry was casted into a …

Antibacterial, Self-Adhesive Guar Gum/Polyvinyl Alcohol/Tannic Acid Conductive Hydrogels For Flexible Strain Sensors, Noppanan Putdon, Somnuk Theerakulpistut, Rawit Jittham, Pornnapa Kasemsiri

Journal of Metals, Materials and Minerals

In this research, a multifunctional strain sensor with antibacterial properties and self-adhesion capabilities was developed using guar gum (GG), polyvinyl alcohol (PVA), and tannic acid (TA). The incorporation of TA into GG-PVA hydrogel-based strain sensors was investigated to evaluate its effects on mechanical and electrical properties, self-adhesion, and antibacterial activities. The anti-bacterial activities against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) were enhanced with the increasing content of TA. The adhesive strength was observed in the range of 1.20 ± 0.10 kPa to 5.05 ± 0.23 kPa, and the values tended to increase as TA content increased. The …

Mechanochemical Synthesis Of Ni(Ii)-Tptz Complexes With Co-Ligands: Spectroscopy, Dft, And Biological Studies, Deepak Senapati, Anulipsa Priyadarshini, Debadutta Samal, P. Ramesh Babu, Satyanarayan Sahoo, Narayan Chandra Bera, Raghabendra Samantaray, Jagannath Panda, Rojalin Sahu

Journal of Metals, Materials and Minerals

New mixed-ligand Ni(II) complexes [Ni(tptz)(1,10-phen)] (1), [Ni(tptz)(2-Mimd)2] (2), and [Ni(tptz)Imd)2] (3) were synthesized via a green, solvent-free mechanochemical approach using ball milling. The primary ligand used was 2,4,6-tris(2-pyridyl)-1,3,5-triazine (tptz), with secondary ligands being 1,10-phenanthroline, 2-methyl imidazole, and imidazole, respectively. Structural characterization by IR, UV-Visible, photoluminescence spectroscopy, and powder X-ray diffraction, supported by DFT calculations, revealed a distorted square planar geometry for complex 1 and distorted tetrahedral geometries for complex-2 and complex-3. Notably, bathochromic shifts in the UV-Vis spectra confirm metal-ligand charge transfer transitions and extended π-delocalization. Powder XRD analysis determined average crystallite sizes of 17.86 nm (1), 25 nm (2), …

Liquid-Liquid Extraction Of Nd(Iii) Using [P66614][Cy272] Ionic Liquid, Prasanjit Das, Kali Sanjay, Niharbala Devi

Journal of Metals, Materials and Minerals

This study explores the extraction of Nd(III) from synthetic solutions using the ionic liquid [P66614] [Cy272]. Key extraction parameters, including the effect of phase contact time, initial pH, salting-out agents, extractant concentration, and temperature, were systematically optimized. Results revealed that a phase contact time of 15 min, an initial pH of 2.14, and 0.2 mol∙L‒1 NaCl as a salting-out agent and extractant concentration of 0.015 mol∙L‒1 [P66614][Cy272], achieved maximum extraction efficiency of 99.7%. Thermodynamic analysis confirmed the process is to be exothermic, spontaneous, and entropy-driven, highlighting the strong complexation between Nd(III) and the ionic liquid [P66614][Cy272]. Stripping tests revealed that …

Enhancing Acetone Gas Sensor Performance With Cobalt Oxide Doping In Lafeo3 Prepared By Co-Precipitation, Andhy Setiawan, Farah Aprisza Sheelmarevaa, Muhamad Taufik Ulhakim, Dani Gustaman Syarif, Endi Suhendi

Journal of Metals, Materials and Minerals

Semiconductor-based gas sensors frequently encounter difficulties in attaining optimal performance due to challenges such as temporal stability and low sensitivity, stemming from their insulating properties at room temperature. To address these limitations, this study proposes a novel approach by preparing cobalt-doped LaFeO3 (LaFeO3-Co) using the co-precipitation method, with doping concentrations of 2.5 mol% and 5.0 mol%. The acetone gas sensors were fabricated into thick films via the screen-printing technique, and their performance was thoroughly characterized. X-ray diffraction (XRD) analysis confirmed a cubic crystal structure, and the addition of 2.5 mol% cobalt was found to reduce the particle size of LaFeO3, …

Enhanced Photocatalytic Reduction Of Cr(Vi) Under Visible Light A Magnetically Separable Tio2-Fe/Fe3o4 Photocatalyst Prepared From Iron Rusty Waste, Khoirunisa Khoirunisa, Novianti Dwi Lestari, Endang Tri Wahyuni, Taufik Abdillah Natsir

Journal of Metals, Materials and Minerals

This research deals with enhancing the visible activity and generating the magnetic property of TiO2 by Fe doping and Fe3O4 impregnation respectively, using rusty iron waste as Fe source. The prepared TiO2-Fe/Fe3O4 photocatalysts were characterized by SR-UV/Visible, FTIR, XRD, and SEM-EDX instruments. The resulting photocatalysts are responsive to visible light and can be separated magnetically and used for photoreduction of Cr (VI) ions. In the photoreduction of Cr(VI) over TiO2-Fe/Fe3O4 photo-catalysts with various amounts of Fe dopant and alteration of Fe3O4 fraction, the photocatalyst mass, irradiation time, and solution pH were optimized. The research results assign that doping Fe to …

Hydroxyl Combined With Nitrogen On Biomass Carbon Promotes The Electrocatalytic H2o2 Selectivity, Jiabi Jiang, Danni Deng, Yuchao Wang, Yingbi Chen, Yu Bai, Meng Wang, Xiang Xiong, Yongpeng Lei

Journal of Metals, Materials and Minerals

Elevating the selectivity of two-electron oxygen reduction reaction (2e‒ ORR) is challenging. Herein, the hydroxyl combined with nitrogen on biomass carbon exhibits a high H2O2 selectivity over a wide potential range of 0 V to 0.5 V vs. RHE, which is nearly 97% at 0.3 V vs. RHE. The combination of hydroxyl and nitrogen improves the adsorption and desorption of intermediates, finally changing the reaction pathway and promoting the selectivity of 2e‒ ORR. The Faradaic efficiency (FE) reaches 98% at 0.3 V vs. RHE. Furthermore, the typical organic pollutants were degraded on site in flow cell. This work illustrates the …

Elucidating The Corrosion Of Carbon Steel In Hybrid Monoethanolamine Solutions Containing Methanol Or N-Methyl-2-Pyrrolidone, Pui Yee Tan, Lian See Tan, Swee Pin Yeap, Peck Loo Kiew, Mee Kee Wong, Azmi Mohd Shariff

Journal of Metals, Materials and Minerals

Corrosion has been a persistent issue in carbon dioxide (CO2) absorption unit that needs to be resolved in order to prolong the life span of the absorber unit. In this regard, understanding the corrosion behaviour, particularly in hybrid monoethanolamine (MEA) solutions, is crucial. This study aims to give detail information on the role of different process parameters, encompassing types of amine solution, temperature, and CO2 loading on the corrosion behaviour of carbon steel in system containing hybrid solution of monoethanolamine (MEA) and methanol (MeOH) or N-methyl-2-pyrrolidone (NMP). Here, the corrosion extent of the carbon steel was evaluated using gravimetric experiments. …

High-Binding Affinity Nanobody Against Sars-Cov-2 Xbb.1.5: Computational-Based Protein Engineering, Phoomintara Longsompurana, Napat Kongtaworn, Rungtiva P. Poo-Arporn, Thanyada Rungrotmongkol

Journal of Metals, Materials and Minerals

The emergence of the SARS-CoV-2 variant XBB.1.5 has triggered a global health crisis by enhancing viral entry into cells via its spike protein. This study addresses the urgent need to develop neutralizing nanobodies (Nbs) to counteract the SARS-CoV-2 virus. Our aim was to identify a lead Nb and enhance its binding affinity to the receptor-binding motif (RBM) on the receptor-binding domain (RBD) of the SARS-CoV-2 spike protein (S-protein) using computational methods. A total of 29 Nbs were screened against the XBB.1.5 RBD using the HDOCK server to select a lead Nb. This investigation revealed that Nb_7KGK exhibited the highest binding …

Electrochemical Study Of Zn-Fe Alloy Coatings On Mild Steel For Automotive Applications, Ramesh Bhat, A. Chitharanjan Hegde

Journal of Metals, Materials and Minerals

This study investigates the electrochemical behavior of Zn-Fe alloy deposited on mild steel (MS) substrates for automotive applications. The electrodeposition of a Zn-Fe alloy onto MS using an acid chloride bath, with 1,2,4-Triazole as an additive to enhance the uniformity of the deposit. The hull cell method was used to optimize the bath composition and operating conditions. The coatings were produced using electrodeposition at varying current densities, with 3 A∙dm‒2 identified as the optimal current density (CD) for achieving uniform coatings. The microstructural properties, including crystallite size and micro-strain, were analyzed using X-ray diffraction (XRD) and Williamson-Hall (W-H) analysis, revealing …

Influence Of The Casting Processes And Aging Times On The Microstructure And Hardness Of Alsi12 Cu Cast Alloys, Said Beroual, Pascal Paillard, Yann Borjon-Piron

Journal of Metals, Materials and Minerals

The present study investigated the effects of the casting processes and aging times on the micro-structure and hardness of commercial AlSi12Cu alloys. The primary goal was to assess how various aging times affect the maximum hardness of the alloy and to evaluate the influence of cooling rates on hardness values obtained from sand casting (SC) and High-pressure die casting (HPDC). For both casting alloys, the solution heat treatment was performed at 540℃, followed by quenching. The alloys were then aged at 180℃ for various durations, ranging from 10 min to 50 h. The results reveal significant microstructural changes in the …

Photodegradation Of Malachite Green Using 2d G-C3n5 Nanosheet: A Promising Metal Free Catalyst, Sonali Biswal, Swayam Aryam Behera, Asima Subhadarshini, P. Ganga Raju Achary, Binita Nanda

Journal of Metals, Materials and Minerals

Environmental issues have become more serious these days due to the growth of modern industries. The paper and textile industries, in particular, were heavily dependent on the printing and discharge of dye, which constantly leaked into the water ecology and constituted a serious risk to public health. Organic wastewater treatment and remediation for its associated risks have received a lot of attention lately. This work explored the potential of the g-C3N5 nanostructure as a novel photocatalyst for malachite green degradation in aqueous solution while exposed to visible light. The nanocomposite was fabricated through an ultrasonicate-assisted technique. A number of analysis …

Regulating Copx/Co Heterostructures For Enhanced Electrocatalytic Activity Toward Hydrazine Oxidation Reaction, Qinquan Lin, Rui Zhang, Changli Yan, Qizhao Hu, Shangbin Sang, Qiumei Wu, Kaiyu Liu, Hongtao Liu

Journal of Metals, Materials and Minerals

Hydrazine hydrate (N2H4∙H2O) is considered an ideal fuel for fuel cells. Constructing a cobalt phosphide/cobalt (CoPx/Co) heterostructure can achieve efficient electrocatalytic activity for hydrazine oxidation reaction. Traditional strategies for constructing CoPx/Co heterostructures took less consideration on the exposure of the active sites. In this study, 3D nanoflower-like nano CoPx/Co heterostructures with highly exposed active sites were obtained on a nickel foam (NF) through a dual-component phosphating strategy, i.e., regulating the relative content of Co and Co(OH)2 with cathodic current density and utilizing the differences in their phosphating behaviors. The potential at 100 mA∙cm‒2 and Tafel slope of the optimized CoPx/Co(375)@NF …

Facile Synthesis Of Bamno3-Zro2 Composite: A Step Towards The Photocatalytic Degradation Of Organic Dye, Kirttimayee Mohanta, Swayam Aryam Behera, Binita Nanda, P. Ganga Raju Achary

Journal of Metals, Materials and Minerals

Environmental contamination by synthetic dyes, particularly Methylene Blue (MB), presents a significant threat to aquatic ecosystems and human health due to their chemical stability and toxicity. This study investigates the photocatalytic degradation of MB using a BaMnO3:ZrO2 composite synthesized in a 1:2 ratio via a straightforward wet-chemical method. Structural and optical characterizations were performed using X-ray diffraction (XRD), Scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FTIR), and Ultraviolet-visible diffuse reflectance spectroscopy (UV-DRS). The composite exhibited a reduced bandgap of 2.88 eV and uniform nanoscale morphology, both favorable for visible-light-driven photocatalysis. Under visible-light irradiation, the catalyst achieved 89% degradation efficiency within …

The Effects Of Graphene Nanoplatelets And Microcrystalline Cellulose On The Mechanical Properties Of Fiberglass And Carbon Fiber Composites, Duangjai Srisamut, Nathawat Poopakdee, Warut Thammawichai

Journal of Metals, Materials and Minerals

This study investigated how graphene nanoplatelets (GNP) and microcrystalline cellulose (MCC) affect the mechanical properties of epoxy (EP), carbon fiber (CF), and fiberglass (FG) composites. The tensile and flexural properties of GNP-EP and MCC-EP of  varying reinforcement concentrations were examined. Results indicated significant improvements on tensile and flexural properties by GNP and MCC. At 0.1 wt% GNP, tensile and flexural strengths increased by 10% and 21%, while 2.0 wt% improved flexural modulus by 65%. Similarly, 2.0 wt% MCC improved tensile strength, modulus, and flexural modulus by 11%, 11%, and 46%, respectively, and a 26% increase in flexural strength at 1.0 …

Synthesis Temperature-Driven Enhancements In Bioi Photocatalysis: A Hydrothermal Approach, Sorawit Thueanbangyang, Kittiyaporn Singsumphan, Varunya Atimayulerd, Chutima Nakmuk, Cheewita Suwanchawalit, Montri Aiempanakit

Journal of Metals, Materials and Minerals

Bismuth oxyiodide (BiOI) is a promising photocatalyst for visible-light-driven environmental remediation. However, its photocatalytic efficiency is highly dependent on synthesis conditions, particularly hydrothermal temperature, which governs its structural, optical, and electronic properties. In this study, BiOI was synthesized via a hydrothermal method at temperatures of 120℃, 150℃, 180℃, and 210℃ to investigate the effect of temperature on its photocatalytic performance systematically. Comprehensive characterizations, including X-ray diffraction, field emission scanning electron microscopy, energy-dispersive X-ray spectroscopy, Fourier-transform infrared spectroscopy, UV-vis diffuse reflectance spectroscopy, photoluminescence and photocatalytic degradation studies, were conducted to analyze crystallinity, morphology, band structure and charge transfer properties. The results …

Bagasse Lignin For Single-Used Food Packaging Applications: Uv-Barrier, Antioxidant, Migration And Cytotoxicity, Pawarisa Wijaranakul, Bongkot Hararak, Wanwitoo Wanmoolee, Prapudsorn Wannid, Weerawan Laosiripojana

Journal of Metals, Materials and Minerals

This study examined PLA biocomposite films made from organosolv lignin extracted from Thai agro-waste, specifically sugarcane bagasse (BG), to assess their suitability for food packaging, focusing on their physical, thermal, optical, UV-shielding, antioxidant, and migration properties. Extracted BG-lignin exhibited free radical scavenging ability with an EC50 value of 400 µg/ml, reducing DPPH absorbance by 50%. PLA composite films with BG-lignin dosage from 0.1 to 1.0 wt.% were successfully fabricated via conventional blown film extrusion. Addition of BG-lignin at 0.5 wt.% and 1.0 wt.% to PLA films decreased UV transmittance from 90% to 30% and 12%, respectively, without compromising optical clarity. …

Coating Of Zinc Substrates With Fluorosilane Molecules Using A Water-Treatment Technique As A Pre-Coating Procedure For The Creation Of Superhydrophobic Surfaces, Renz Ronald R. Prieto, Marvin U. Herrera

Journal of Metals, Materials and Minerals

Superhydrophobic surfaces were successfully created when zinc substrates were coated with molecules with low surface energy through grafting of fluorosilane molecules. The zinc substrate underwent water-treatment technique as a pre-coating procedure to enhance the reaction sites for the grafting of fluorosilane molecules. The water contact angle of the samples went as high as 161.1° ± 0.8°. At lower fluorosilane-ethanol soaking times, water contact angles have lower values while at higher soaking time, it has higher water contact angle values. At 240 min fluorosilane-ethanol soaking time, optimum value of water contact angle was achieved. Fluorosilane molecules are widely distributed through the …

Sulfur-Doped Carbon Dots Derived From Caffeine: A Highly Efficient Photocatalyst For Organic Dye Degradation, Ganyaporn Wongwaen, Koranut Dechsri, Praneet Opanasopit, Montri Aiempanakit, Cheewita Suwanchawalit

Journal of Metals, Materials and Minerals

Sulfur-doped carbon dots (S-doped CDs) were synthesized via a solvothermal method using caffeine as a carbon precursor and sodium sulfide as a sulfur source. Characterization using transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), Fourier-transform infrared spectroscopy (FT-IR), ultraviolet -visible (UV-Vis) spectroscopy, and photoluminescence spectroscopy (PL) confirmed successful sulfur incorporation. TEM revealed a uniform size distribution and graphitic structures, while UV-Vis analysis showed a reduction in the bandgap from 3.29 eV to 3.10 eV, improving light absorption and charge carrier separation. The photocatalytic activity of S-doped CDs was evaluated for indigo carmine (IC) dye degradation under UV irradiation, where 2S-CDs …

Impacts Of Calcination Temperature On The Crystallography, Granulometry And Impedance Of Licomno4, Chee Wayne Tan, Zul Hilmi Che Daud, Zainab Asus, Mohd Hasbullah Idris, Izhari Izmi Mazali, Mohd Kameil Abdul Hamid

Journal of Metals, Materials and Minerals

Spinel structured lithium cobalt manganese oxide (LiCoMnO4) which exhibit reduction potential surpassing 5.0 V (vs. Li0 | Li+) was identified to be one of the prospective cathode candidates for next generation lithium-ion electrochemical systems. This article highlights the significance of calcination temperature on the crystallography of the resultant electroceramic compound as well as the corresponding response on the granulometry and impedance of LiCoMnO4. LiCoMnO4 compounds synthesised via sol-gel reaction in the first instance were converted into xerogel and subsequently subjected to facile one-step calcination protocol. Crystallography of the post-calcinated compounds were characterised via powder x-ray diffraction (XRD) technique. Temperature ranging …

Effect Of Lanthanum Doping On Phase Transition, Piezoelectric And Energy Storage Properties Of Lead-Free 0.93(Bi0.5na0.5)Tio3‒0.07batio3 Ceramics, Pathit Premwichit, Songphop Jaila, Sasiporn Prasertpalichat

Journal of Metals, Materials and Minerals

In this study, lead-free (Bi0.465Na0.465Ba0.07)(1–x)LaxTiO3 (x=0.0‒0.04) ceramics were synthesized using a conventional solid-state reaction method. All samples showed a single-phase perovskite structure with pseudocubic symmetry. The dense microstructure revealed a decrease in average grain size as x increased. La3+ addition stabilized polar nanoregions (PNRs), shifting the ferroelectric to relaxor phase transition temperature (TF₋R=104℃ for x=0.0) to below room temperatures as La3+ content increased. This resulted in a transition from a rectangular to a relaxor-like thin P–E loop (x≥0.01), indicating a shift from ferro-electric (FE) to relaxor ferroelectric (RFE), which …