Open Access. Powered by Scholars. Published by Universities.®

Engineering Science and Materials Commons™

Open Access. Powered by Scholars. Published by Universities.®

Air Force Institute of Technology

Discipline
Keyword
Publication Year
Publication
Publication Type

Articles 31 - 60 of 176

Full-Text Articles in Engineering Science and Materials

Focused Beam System Biaxial Material Characterization, Nicholas A. O'Gorman Mar 2020

Focused Beam System Biaxial Material Characterization, Nicholas A. O'Gorman

Theses and Dissertations

Electromagnetic material characterization is the process of determining the constitutive parameters (complex permittivity and permeability) of given a sample. Due to the large number of unknowns involved, multiple unique measurements are required for material property extraction. Many measurement methods, such as waveguides and striplines, possess a rigid internal structure that the sample being measured must adhere to. This rigidity limits these methods to samples that fit within the device and inhibits oblique sample orientations, limiting the number of independent measurements that can be obtained. A focus beam system, due to being an open system with greater freedom in sample size …

Go to article

Fatigue Behavior Of An Advanced Melt-Infiltrated Sic/Sic Composite With Environmental Barrier Coating At 1200°C In Air And In Steam, Thaddeus M. Williams Mar 2020

Fatigue Behavior Of An Advanced Melt-Infiltrated Sic/Sic Composite With Environmental Barrier Coating At 1200°C In Air And In Steam, Thaddeus M. Williams

Theses and Dissertations

Advanced aerospace applications such as aircraft turbine engine components, hypersonic flight vehicles, and spacecraft reentry thermal protection systems require structural materials that have superior long-term mechanical properties under high temperature, high pressure, and varying environmental factors, such as moisture. Because of their low density, high strength and fracture toughness at high temperatures SiC fiber-reinforced SiC matrix composites are being evaluated for aircraft engine hot-section components. In these applications the composites will be subjected to various types of mechanical loadings at elevated temperatures in oxidizing environments. Because their constituents are intrinsically oxidation-prone, the most significant problem hindering SiC/SiC composites is oxidation …

Go to article

Structural Dynamic And Inherent Damping Characterization Of Additively Manufactured Airfoil Components, Andrew W. Goldin Mar 2020

Structural Dynamic And Inherent Damping Characterization Of Additively Manufactured Airfoil Components, Andrew W. Goldin

Theses and Dissertations

The push for low cost and higher performance/efficient turbine engines have introduced a new demand for novel technologies to improve robustness to vibrations resulting in High Cycle Fatigue (HCF). There have been many proposed solutions to this, some passive and some active. With the advent of Additive Manufacturing (AM), new damping techniques can now be incorporated directly into the design and manufacture process to suppress the vibrations that create HCF. In this study, this novel unfused pocket damping technology is applied to a blade structure and the resulting damping effectiveness is quantified. The application of this technology to complex geometries …

Go to article

Effects Of Carbon-Based Ablation Products On Hypersonic Boundary Layer Stability, Olivia S. Elliott Sep 2019

Effects Of Carbon-Based Ablation Products On Hypersonic Boundary Layer Stability, Olivia S. Elliott

Theses and Dissertations

Hypersonic vehicles require an accurate prediction of the transition of the boundary layer for the design of the thermal protection system due to the high heating rates under turbulent flow. Many thermal protection systems are carbon-based and introduce new species, specifically CO2, into the boundary layer flow which are known to dampen the instabilities that lead to transition for hypersonic vehicles. A Computation Fluid Dynamics study was accomplished examining the concentration of CO2 required to impact boundary layer transition over both sharp and blunt cones. These results were used in conjunction with air-carbon ablation models models to …

Go to article

On The Pulsed Laser Ablation Of Metals And Semiconductors, Todd A. Van Woerkom Aug 2019

On The Pulsed Laser Ablation Of Metals And Semiconductors, Todd A. Van Woerkom

Theses and Dissertations

This dissertation covers pulsed laser ablation of Al, Si, Ti, Ge, and InSb, with pulse durations from tens of picosecond to hundreds of microseconds, fluences from ones of J/cm2 to over 10,000 J/cm2, and in ambient air and vacuum. A set of non-dimensional scaling factors was created to interpret the data relative to the laser and material parameters, and it was found that pulse durations shorter than a critical timescale formed craters much larger than the thermal diffusion length, and longer pulse durations created holes much shallower than the thermal diffusion length. Low transverse order Gaussian beams …

Go to article

Ballistic Evaluation Of Carbon Nanotube Sheet Material In Multifunctional Applications, Casey M. Keilbarth Mar 2019

Ballistic Evaluation Of Carbon Nanotube Sheet Material In Multifunctional Applications, Casey M. Keilbarth

Theses and Dissertations

Significant development of carbon nanotubes has occurred since they were first studied in the 1990's. Attempts to capture the phenomenal molecular properties in practical applications are gaining ground as new methods of producing CNTs have been developed. This thesis sought to determine if the addition of commercially produced CNT sheets to thin carbon fiber panels improved the ballistic properties of the panel. The difference between 0 and 4 CNT sheets was studied. The hypothesis was that inte- grating CNT sheets into the laminate would increase the projectile energy absorbed by the panel and reduce the damage to the panel incurred …

Go to article

Tracking Shock Movement On The Surface Of An Oscillating, Straked Semispan Delta Wing, Justin A. Pung Mar 2019

Tracking Shock Movement On The Surface Of An Oscillating, Straked Semispan Delta Wing, Justin A. Pung

Theses and Dissertations

A recent research effort, sponsored by the Air Force Office of Scientific Research, numerically investigated the unsteady aerodynamic flow field around an oscillating, straked, delta wing. The study was centered on determining the importance of the unsteady aerodynamic forces acting as a driver for a nonlinear motion known as limit cycle oscillations. The current effort focused on creating a computational model to compare to the results of previous tests and modeling efforts and discover new information regarding the onset of LCO. The computational model was constructed using the Cartesian overset capabilities of the CREATE-AV™ fixed wing fluid dynamics solver Kestrel. …

Go to article

Manufacture Of Fused Deposition Modeling Joints Using Ultem 9085, Zane A. Willburn Mar 2019

Manufacture Of Fused Deposition Modeling Joints Using Ultem 9085, Zane A. Willburn

Theses and Dissertations

The manufacture of joints between a base structure and a structure manufactured via Fused Deposition Modeling (FDM) will be investigated. ULTEM 9085, a high temperature plastic with potential aerospace applications, will be the material used. The specific application this research is focused on is a robotic and mobile FDM printer capable of building structures onto other structures in space. A joint will be formed by fusing the base layer of the printed structure and the top of the base structure together. Tensile testing will be performed to determine the strength of the bond between parts. Tensile specimens will be manufactured …

Go to article

Influence Of Leading Edge Oscillatory Blowing On Time-Accurate Dynamic Store Separation, Ryan G. Saunders Mar 2019

Influence Of Leading Edge Oscillatory Blowing On Time-Accurate Dynamic Store Separation, Ryan G. Saunders

Theses and Dissertations

The primary objective of this research is to support the static and dynamic characterization and the time-accurate dynamic load data acquisition of store separation from a cavity with leading edge oscillatory blowing. Developing an understanding of, and potentially controlling, pitch bifurcation of a store release is a motivation for this research. The apparatus and data acquisition system was used in a two-part experiment to collect both static and dynamic testing data in the AFIT low speed wind tunnel in speeds of 60, 100, and 120 mph, from Reynolds numbers varying from 5.5x104 to 4.6x105, depending on reference …

Go to article

Analytical Models And Control Design Approaches For A 6 Dof Motion Test Apparatus, Kyra L. Schmidt Mar 2019

Analytical Models And Control Design Approaches For A 6 Dof Motion Test Apparatus, Kyra L. Schmidt

Theses and Dissertations

Wind tunnels play an indispensable role in the process of aircraft design, providing a test bed to produce valuable, accurate data that can be extrapolated to actual flight conditions. Historically, time-averaged data has made up the bulk of wind tunnel research, but modern flight design necessitates the use of dynamic wind tunnel testing to provide time-accurate data for high frequency motion. This research explores the use of a 6 degree of freedom (DOF) motion test apparatus (MTA) in the form of a robotic arm to allow models inside a subsonic wind tunnel to track prescribed trajectories to obtain time-accurate force …

Go to article

Computational Aerothermodynamic Analysis Of Satellite Trans-Atmospheric Skip Entry Survivability, John J. Runco Mar 2019

Computational Aerothermodynamic Analysis Of Satellite Trans-Atmospheric Skip Entry Survivability, John J. Runco

Theses and Dissertations

Computational aerothermodynamic analysis is presented for a spacecraft in low Earth orbit performing an atmospheric skip entry maneuver. Typically, atmospheric reentry is a terminal operation signaling mission end-of-life and, in some instances, executed for spacecraft disposal. A variation on reentry – skip entry – is an aeroassisted trans-atmospheric maneuver in which a spacecraft utilizes the effects of aerodynamic drag in order to reduce energy prior to a terminal entry, pinpoint a targeted entry, or change orbital elements such as inclination. Spacecraft performing a skip entry enable new modes of maneuver to enhance operations in nominal or possibly contested mission environments. …

Go to article

Creep Of Hafnium Diboride -20 Vol% Silicon Carbide At 1500°C In Air, Glen E. Pry Mar 2018

Creep Of Hafnium Diboride -20 Vol% Silicon Carbide At 1500°C In Air, Glen E. Pry

Theses and Dissertations

Refractory metal borides, commonly referred to as Ultra High Temperature Ceramics (UHTCs), exhibit a number of unique properties, such as extremely high melting temperature and hardness, chemical stability, high electrical and thermal conductivity and corrosion resistance. It has been demonstrated that the addition of SiC improves the oxidation resistance of ZrB2- and HfB2-based UHTCs above 1200°C by modifying the composition of the oxide scale. Addition of SiC retards the oxidation rate of ZrB2 and HfB2 by forming a protective layer of borosilicate glass. Creep deformation is one of the critical criterion for structural application of ceramics at elevated temperatures. Compression …

Go to article

Tensile Properties And Fatigue Behavior Of Geopolymer Matrix Composites With Carbon Fiber Reinforcement At Elevated Temperature, Steffan M.L. Wilcox Mar 2018

Tensile Properties And Fatigue Behavior Of Geopolymer Matrix Composites With Carbon Fiber Reinforcement At Elevated Temperature, Steffan M.L. Wilcox

Theses and Dissertations

The tensile stress-strain and tension-tension fatigue of geopolymer matrix composites reinforced with 0/90 carbon fibers was investigated at 23 and 300°C in laboratory air. Geopolymers are inorganic polymeric materials composed of alumina, silica, and alkali metal oxides. Because geopolymers are synthesized as a fluid mixture or particles and liquid, they can be cast into a desired shape, and cured at only slightly elevated temperatures. The relative ease of synthesis and low processing temperatures make geopolymers an attractive choice as a matrix material for composite materials. Geopolymers also offer resistance to heat and oxidizing environments. Currently, geopolymer matrix composites are being …

Go to article

Creep Of Nextel 720/A Ceramic Matrix Composite With Laser Drilled Effusion Holes At 1200°C In Air And In Steam, Savannah N. Minor Mar 2018

Creep Of Nextel 720/A Ceramic Matrix Composite With Laser Drilled Effusion Holes At 1200°C In Air And In Steam, Savannah N. Minor

Theses and Dissertations

Creep behavior of an oxide-oxide ceramic matrix composite (CMC) containing an array of effusion holes was investigated at 1200⁰C in air and in steam. The composite (N720/A) consisted of a porous alumina matrix reinforced with alumina-mullite NextelTM 720 fibers. Test specimens had an array of 17 effusion holes with 0.5-mm diameter. The effusion holes were drilled through the specimen thickness normal to the specimen surface using a CO2 laser. Effect of the effusion holes on tensile properties was evaluated tension tests to failure at 1200°C in air. Creep of specimens with effusion holes at 1200°C was studied for creep stresses …

Go to article

Influence Of Coolant Flow Rate Parameters In Scaling Gas Turbine Cooling Effectiveness On A Flat Plate, Jacob P. Fischer Mar 2018

Influence Of Coolant Flow Rate Parameters In Scaling Gas Turbine Cooling Effectiveness On A Flat Plate, Jacob P. Fischer

Theses and Dissertations

Effective film cooling relies on the performance of the selected cooling hole shape and placement of the holes on the surface of the blade. To test each holes effectiveness, large scale, low-temperature testing has been used to reduce cost and complexity. The resulting quantity from this testing is called the adiabatic effectiveness (n). The adiabatic effectiveness can then scaled up to engine operating conditions to predict how the selected film cooling hole will perform. This process is complicated by the nonlinear variation of gas properties between coolant and freestream conditions as well as between the experimental and engine conditions. In …

Go to article

Stressed Oxidation Of Hafnium Diboride In Air At 1500°C, Thomas A. Bowen Mar 2017

Stressed Oxidation Of Hafnium Diboride In Air At 1500°C, Thomas A. Bowen

Theses and Dissertations

Hypersonic vehicles with narrow airfoils produce thin boundary layers and shock temperatures in excess of 2000°C, exceeding the operating limits of traditional aerospace materials. The use of ultra-high temperature ceramics (UHTCs) allows for operating temperatures far exceeding those of metallic alloys. One such UHTC is hafnium diboride (HfB2). Transition metal diborides generally experience significant oxidation degradation at elevated temperatures. The use of additives, such as silicon carbide (SiC) has been shown to reduce the oxidation of transition metal diborides. This research focused on the compressive creep of HfB2 with varying amounts of SiC in air at 1500°C. …

Go to article

Tunable Terahertz Metamaterials With Germanium Telluride Components, Christopher H. Kodama Mar 2016

Tunable Terahertz Metamaterials With Germanium Telluride Components, Christopher H. Kodama

Theses and Dissertations

Terahertz (THz) technology is an emerging field with many exciting applications. THz waves can be used to locate explosives and illicit drugs in security applications, or DNA and other molecule resonances in medical applications. THz frequencies represent the next level of modern, high-speed computing, but they also can be used for covert battlefield communications links. Metamaterials are an integral part of THz technology because they can be used to create exotic material properties—permittivities and permeabilities—in a part of the frequency spectrum that is otherwise rather empty and passive. This work aims to acquire a fuller understanding of THz metamaterials in …

Go to article

A Nonequilibrium Finite-Rate Carbon Ablation Model For Radiating Earth Re-Entry Flows, Christopher R. Alba Sep 2015

A Nonequilibrium Finite-Rate Carbon Ablation Model For Radiating Earth Re-Entry Flows, Christopher R. Alba

Theses and Dissertations

Vehicles entering planetary atmospheres at high speed require an ablative heat shield in order to withstand the high thermal energy flux to the body. The interaction between the ablative products and the flow field is not well characterized. Numerical simulations were conducted to investigate the influence of carbon ablation on shock layer radiation. Data collected from experiments performed in the X-2 expansion tunnel at the University of Queensland was used to compare to the simulations. The model was a short half-cylinder made of isomolded graphite and was tested in 8.6 km/s Earth entry flow. The model surface was heated within …

Go to article

Experimental Investigation Of Mechanical Behavior Of An Oxide/Oxide Ceramic Composite In Interlaminar Shear And Under Combined Tension-Torsion Loading, Skyler R. Hilburn Mar 2014

Experimental Investigation Of Mechanical Behavior Of An Oxide/Oxide Ceramic Composite In Interlaminar Shear And Under Combined Tension-Torsion Loading, Skyler R. Hilburn

Theses and Dissertations

Creep behavior in interlaminar shear of an oxide-oxide ceramic composite, Nextel 720™/aluminosilicate (N720/AS), was investigated at 1100°C in laboratory air and in steam. The interlaminar shear strength (ILSS) was determined as 7.65 MPa. The creep behavior was examined for interlaminar shear stresses in the 2-6 MPa range. Primary and secondary creep regimes were observed in all tests conducted in air and in steam. Tertiary creep was noted in the tests performed at 6 MPa. Larger creep strains and higher creep strain rates were produced in steam. Surprisingly, the presence of steam had a beneficial effect on creep lifetimes. It appears …

Go to article

Structure Health Monitoring (Shm) System Trade Space Analysis, Salman A. Albinali, David R. Jacques Jan 2014

Structure Health Monitoring (Shm) System Trade Space Analysis, Salman A. Albinali, David R. Jacques

Faculty Publications

An analytic approach to exploring the tradespace associated with Structural Health Monitoring (SHM) systems is presented. Modeling and simulation of the life cycle of a legacy aircraft and the expected operational and maintenance events that could occur is shown. A focus on the SHM system detection of a significant crack length and the possibility of False Alarm (FA), miss detection and mishap events is investigated. The modeling approach allows researchers to explore the tradespace associated with safe and critical crack lengths, sensor thresholds, scheduled maintenance intervals, falsely triggered maintenance actions, and mishaps due to missed detections. As one might expect, …

Go to article

Modeling Reliability Growth In Accelerated Stress Testing, Jason K. Freels Dec 2013

Modeling Reliability Growth In Accelerated Stress Testing, Jason K. Freels

Theses and Dissertations

Qualitative accelerated test methods improve system reliability by identifying and removing initial design flaws. However, schedule and cost constraints often preclude sufficient testing to generate a meaningful reliability estimate from the data obtained in these tests. In this dissertation a modified accelerated life test is proposed to assess the likelihood of attaining a reliability requirement based on tests of early system prototypes. Assuming each prototype contains an unknown number of independent competing failure modes whose respective times to occurrence are governed by a distinct Weibull law, the observed failure data from this qualitative test are shown to follow a poly-Weibull …

Go to article

Empirically Bounding Of Space Booms With Tape Spring Hinges, Alan L. Jennings, Jonathan T. Black, Chris Allen Nov 2012

Empirically Bounding Of Space Booms With Tape Spring Hinges, Alan L. Jennings, Jonathan T. Black, Chris Allen

Faculty Publications

Self-deploying structures seek to provide a compact launch package for large, lightweight satellite booms. One self-deploying method is a foldable tape spring. This paper examines the large scale behavior of a boom attached by a tape spring hinge during mock deployments. A boom attached by tape spring to a rigid stand was released and the boom bounced up to 60° before coming to rest (as opposed to snap-through behavior). These large amplitude bounces can cause the boom to collide with sensors, other booms or arrays causing damage or preventing full deployment. Results show the first bounce of deployment is nearly …

Go to article

Efficient Airframe Management Using In-Situ Structural Health Monitoring, Mark M. Derriso, M. S. Leonard, Martin P. Desimio, Steven E. Olson Jul 2012

Efficient Airframe Management Using In-Situ Structural Health Monitoring, Mark M. Derriso, M. S. Leonard, Martin P. Desimio, Steven E. Olson

Student Publications

The United States Air Force utilizes the Aircraft Structural Integrity Program (ASIP) to service and maintain its airframes. This schedule-based maintenance approach works well for ensuring system integrity; however, it is very costly, labor-intensive, and it reduces system availability. As a result, the Air Force intends to transition to a process that services aircraft based on their actual condition instead of the presumptive schedule-based approach. Structural health monitoring (SHM) technologies are being investigated to enable such real-time state awareness and decision-making. This paper provides a brief review of ASIP and the required inspections to investigate structural fatigue. The current ASIP …

Go to article

Design, Fabrication And Testing Of Tunable Rf Meta-Atoms, Derrick Langley Jun 2012

Design, Fabrication And Testing Of Tunable Rf Meta-Atoms, Derrick Langley

Theses and Dissertations

Metamaterials are engineered structures designed to alter the propagation of electromagnetic waves incident upon the structure. The focus of this research was the effect of metamaterials on electromagnetic signals at radio frequencies. RF meta-atoms were investigated to further develop the theory, modeling, design and fabrication of metamaterials. Comparing the analytic modeling and experimental testing, the results provide a deeper understanding into metamaterials which could lead to applications for beam steering, invisibility cloaking, negative refraction, super lenses, and hyper lenses. RF meta-atoms integrated with microelectromechanical systems produce tunable meta-atoms in the 10 - 15 GHz and 1 - 4 GHz frequency …

Go to article

A High Bandwidth Non-Destructive Method For Characterizing Simple Media, Matthew L. Szuster Mar 2012

A High Bandwidth Non-Destructive Method For Characterizing Simple Media, Matthew L. Szuster

Theses and Dissertations

The relative complex permittivity can be extracted with time domain data from a perfect electrical conductor (PEC) backed sample of a low-loss, non-dispersive dielectric using dual ridged waveguide aperture probes with attached PEC flange plates of the same geometry and different dimensions. The temporal domain measurement of interest is the ability to detect the reflection from the edge of the flange plate in the parallel region created by the flange plate and the PEC backing on the dielectric sample. Signal processing windows are applied to the data in order to exploit this edge reflection. The types of signal processing methods …

Go to article

Silicon Carbide Capacitive High Temperature Mems Strain Transducer, Richard P. Weisenberger Mar 2012

Silicon Carbide Capacitive High Temperature Mems Strain Transducer, Richard P. Weisenberger

Theses and Dissertations

Air Force Research Lab Air Vehicles directorate performs research on hypersonic vehicles. To verify materials or designs of hypersonic vehicles, they have a need to measure strain at temperatures exceeding 700°C. Strain sensors have the ability to measure strain. Strain is the deformation of materials due to internal stresses in a material. Internal stresses occur when a material is subjected to a force. Traditional strain sensors use Piezoresistive effects to measure strain, which is temperature dependent and making them unusable at high temperatures. This paper discusses a novel strain sensing device, sensing capacitance instead of piezoresistance. The strain sensor is …

Go to article

Investigation Of Gallium Nitride Transistor Reliability Through Accelerated Life Testing And Modeling, Bradley D. Christiansen Dec 2011

Investigation Of Gallium Nitride Transistor Reliability Through Accelerated Life Testing And Modeling, Bradley D. Christiansen

Theses and Dissertations

Gallium nitride high electron mobility transistors are attractive to the DoD for their ability to operate at high frequencies, voltages, temperatures, and power. Yet, there are concerns about the reliability of these devices. Various degradation mechanisms and their causes are proposed in the literature. A variety of reliability tests were conducted to understand these mechanisms and causes. A multi-stressor experiment revealed different failure mechanisms than are in the literature. In particular, the devices tested at high voltage in the OFF state did not degrade significantly as suggested by others' reports. The validity of temperature-accelerated life testing when applied to GaN …

Go to article

Application Of Systems Engineering To Rapid Prototyping For Close Air Support, John M. Colombi, Richard G. Cobb Oct 2009

Application Of Systems Engineering To Rapid Prototyping For Close Air Support, John M. Colombi, Richard G. Cobb

Faculty Publications

Twenty-first century military operations have brought forth many new challenges for the Armed Forces of the United States. One such challenge is with new operating environments, where current systems are not always effective. While it is desirable to apply a systems engineering approach to best meet critical user needs, there may be a misconception that systems engineering requires a lengthy and detailed process not nimble enough for a rapid prototyping effort. This article describes how a classic systems engineering methodology was successfully tailored to the rapid development of potential material solutions to meet a critical operational need. Key observations are …

Go to article

Effect Of Steam Environment On Creep Behavior Of Nextel720/Alumina-Mullite Ceramic Matrix Composite At Elevated Temperature, Tolga Kutsal Mar 2009

Effect Of Steam Environment On Creep Behavior Of Nextel720/Alumina-Mullite Ceramic Matrix Composite At Elevated Temperature, Tolga Kutsal

Theses and Dissertations

The tensile creep behavior of an oxide-oxide ceramic matrix composite (CMC) was investigated at 1000 and 1100° C in laboratory air and steam. The oxide-oxide CMC studied in this research was Nextel™ 720/alumina-mullite (N720/AM). The composite consists of N720/fibers with 0°/90° fiber orientation and a porous alumina-mullite matrix. Tensile-strain behavior was investigated and tensile properties measured at 900, 1000 and 1100° C. The effect of loading rate on tensile properties of N720/AM ceramic matrix composite at 1100° C in steam was also examined. Creep-rupture tests were performed at 1100° C in laboratory air and steam, and at 1000° C only …

Go to article

A Finite Element Evaluation Of An Experiment Related To Coating Damping Properties, Armando Deleon Mar 2009

A Finite Element Evaluation Of An Experiment Related To Coating Damping Properties, Armando Deleon

Theses and Dissertations

Typically turbine engine blades gain protection from thermal damage by the use of hard coatings, such as magnesium aluminate spinel. Known as Thermal Barrier Coatings (TBC's), they have material properties that include several nonlinearities. These TBC's create damping primarily due to their nonlinear dissipation of energy. In order to effectively represent their damping properties, it is necessary to create a method which combines experimentation and analysis. Previous work has shown the need for a beam bounded and loaded in such a fashion that external support energy dissipation functions i.e. boundary conditions and aerodynamics are eliminated. Thus, a new experimental apparatus …

Go to article

First Prev Next Last