Open Access. Powered by Scholars. Published by Universities.®

Engineering Science and Materials Commons™

Open Access. Powered by Scholars. Published by Universities.®

Physical Sciences and Mathematics

Institution
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 601 - 630 of 2132

Full-Text Articles in Engineering Science and Materials

Durability Performance Of The High-Power Fuel Cell System, Ke-Yong Wang, Wei-Yu Shi, Ren-Fang Wang, Jia Liu, Zhong-Jun Hou Dec 2018

Durability Performance Of The High-Power Fuel Cell System, Ke-Yong Wang, Wei-Yu Shi, Ren-Fang Wang, Jia Liu, Zhong-Jun Hou

Journal of Electrochemistry

Fuel cell durability is the crucial challenge in fuel cell vehicle, and the lifetime of more than 5000 hours is believed to be necessary for vehicle application. Few works on durability test of the full fuel cell system have been reported. In this work, the long lifetime HySYS-30 fuel cell system was developed in Sunrise Power based on the improved MEA durability and system control strategy. The durability performance of the system was investigated under vehicle duty cycle for more than 6000 hours, and only 8.1% performance loss was observed, implying that the durability of HySYS-30 fuel cell system could …

Go to article

Recent Progress In Pt-Based Catalysts For Oxygen Reduction Reaction, Jing Li, Xin Feng, Zi-Dong Wei Dec 2018

Recent Progress In Pt-Based Catalysts For Oxygen Reduction Reaction, Jing Li, Xin Feng, Zi-Dong Wei

Journal of Electrochemistry

One major challenge for a large-scale commercialization of the proton-exchange membrane fuel cells (PEMFCs) technologies that enable a shift to ‘zero-emission’ personal transportation, is the expensive and unstable Pt catalysts, which are mainly used to catalyze the sluggish kinetics of the oxygen reduction reaction (ORR) occurred on the air electrode of PEMFCs. Many research works have targets to improve the stability of Pt-based catalysts and to construct Pt/transitional metal alloys with low Pt loading amount. Herein, we provide a minireview for the Pt-based ORR catalysts based on our recent work, which covers a brief background introduction, the stability improvement of …

Go to article

Facile Synthesis Of Pt-Cu Alloy Nanodendrites As High-Performance Electrocatalysts For Oxygen Reduction Reaction, Liu-Xuan Luo, Guang-Hua Wei, Shui-Yun Shen, Feng-Juan Zhu, Chang-Chun Ke, Xiao-Hui Yan, Jun-Liang Zhang Dec 2018

Facile Synthesis Of Pt-Cu Alloy Nanodendrites As High-Performance Electrocatalysts For Oxygen Reduction Reaction, Liu-Xuan Luo, Guang-Hua Wei, Shui-Yun Shen, Feng-Juan Zhu, Chang-Chun Ke, Xiao-Hui Yan, Jun-Liang Zhang

Journal of Electrochemistry

Structures and compositions have significant effects on the catalytic properties of nanomaterials. Herein, a facile etching-based method was employed to synthesize Pt-Cu nanodendrites (NDs) with uniform and homogeneous alloy structures for enhancing oxygen reduction reaction (ORR). The formation of dendritic morphology was ascribed to the etching effect caused by the oxidative etchants of the Br-/O2 pair. The atomic ratio of Pt/Cu in Pt-Cu NDs could be easily tuned by altering the ratio of the Pt/Cu precursors, without deteriorating the dendritic morphology. The most active carbon-supported Pt1Cu1 NDs (Pt1Cu1 NDs/C) exhibited the …

Go to article

Optimization Of Useful Hard X-Ray Photochemistry, David Lewis Goldberger Dec 2018

Optimization Of Useful Hard X-Ray Photochemistry, David Lewis Goldberger

UNLV Theses, Dissertations, Professional Papers, and Capstones

X-ray induced damage is generally considered a nuisance, but in the field of Useful Hard X-ray Photochemistry we harness the highly ionizing and penetrating properties of hard X-rays (> 7 keV) to initiate novel photochemical decomposition and synthesis at ambient and extreme conditions. Preliminary experiments suggest that the energy of irradiating photons and the sample pressure play roles in determining the nature of X-ray induced damage. Here, we present the X-ray energy dependence of damage induced in strontium oxalate, strontium nitrate, and barium nitrate, as well as the pressure dependence of X-ray induced damage of strontium oxalate. Our results indicate …

Go to article

Effective Magnetic And Electric Response Of Composite Materials, Mona Hassan Alsaleh Nov 2018

Effective Magnetic And Electric Response Of Composite Materials, Mona Hassan Alsaleh

Doctoral Dissertations

Metamaterials (MMs) are nanocomposite materials consisting of metal-dielectric resonators much smaller in size than the wavelength of the incident light. Common examples of metamaterials are based on split ring resonators (SRRs), parallel wires or strips and fishnet structures. These types of materials are designed and fabricated in order to provide unique optical responses to the incident electromagnetic radiation that are not available in naturally existing materials. The MMs can exhibit unusual properties such as strong magnetism at terahertz (THz) and optical frequencies. Additionally, negative index materials (NIMs) can provide negative index of refraction which can be used in many applications …

Go to article

Creating A Computational Tool To Simulate Vibration Control For Piezoelectric Devices, Ahmet Ozkan Ozer, Emma J. Moore Nov 2018

Creating A Computational Tool To Simulate Vibration Control For Piezoelectric Devices, Ahmet Ozkan Ozer, Emma J. Moore

Posters-at-the-Capitol

Piezoelectric materials have the unique ability to convert electrical energy to mechanical vibrations and vice versa. This project takes a stab to develop a reliable computational tool to simulate the vibration control of a novel “partial differential equation” model for a piezoelectric device, which is designed by integrating electric conducting piezoelectric layers constraining a viscoelastic layer to provide an active and lightweight intelligent structure. Controlling unwanted vibrations on piezoelectric devices (or harvesting energy from ambient vibrations) through piezoelectric layers has been the major focus in cutting-edge engineering applications such as ultrasonic welders and inchworms. The corresponding mathematical models for piezoelectric …

Go to article

Recent Process In Transition-Metal-Oxide Based Catalysts For Oxygen Reduction Reaction, Yao Wang, Zi-Dong Wei Oct 2018

Recent Process In Transition-Metal-Oxide Based Catalysts For Oxygen Reduction Reaction, Yao Wang, Zi-Dong Wei

Journal of Electrochemistry

Transition metal oxides (TMOs) based catalysts have become the most promising catalysts to be employed in anion exchange membrane fuel cell for the sluggish oxygen reduction reaction (ORR). However, their ORR activity is still far from that of the Pt-based catalysts. Therefore, it is important to develop high performance TMO based catalysts. Electrical conductivity and intrinsic activity have been regarded as the two keys to affect the ORR activity of the TMOs based catalysts. In this review, we focused on the recent progresses in the fundamental viewpoints on the electrical conductivity and intrinsic activity of the TMOs based ORR catalysts. …

Go to article

Recent Advances In Continuous Models Of Electrochemical Supercapacitors, Hao-Tian Lu, Jing-Hong Zhou, Guang-Hua Ye, Xing-Gui Zhou Oct 2018

Recent Advances In Continuous Models Of Electrochemical Supercapacitors, Hao-Tian Lu, Jing-Hong Zhou, Guang-Hua Ye, Xing-Gui Zhou

Journal of Electrochemistry

Electrochemical capacitors (supercapacitors) have been developed as a new type of energy storage device with high energy and power densities, which have the advantages of both fast charging-discharging as traditional capacitors and high energy density as batteries. Notable improvements in their electrochemical performance have been achieved in recent years owing to the recent advances in understanding of charge storage mechanisms and the development of advanced nanostructured materials. Recently, modeling and simulation of these supercapacitors has been applied as a useful approach to better understand the working mechanisms of the supercapacitors by describing the concentrations and electric fields inside the capacitors. …

Go to article

Recent Advances In Non-Noble Metal Nanomaterials For Oxygen Evolution Electrocatalysis, Dan-Dan Zhao, Nan Zhang, Ling-Zheng Bu, Qi Shao, Xiao-Qing Huang Oct 2018

Recent Advances In Non-Noble Metal Nanomaterials For Oxygen Evolution Electrocatalysis, Dan-Dan Zhao, Nan Zhang, Ling-Zheng Bu, Qi Shao, Xiao-Qing Huang

Journal of Electrochemistry

Hydrogen is a kind of renewable energies with the merits of environmentally friendly, abundance and high weight energy density, which can replace the fossil energy. The electrolysis of water is regarded as the most effective way to generate hydrogen. Owing to the sluggish kinetics and large overpotential of the anode oxygen evolution reaction (OER), the efficiency of the cathode hydrogen evolution reaction is greatly limited. Therefore, it is highly desirable to explore efficient, stable and low cost electrocatalysts to reduce the overpotential of OER and improve the efficiency of hydrogen evolution. Based on the natural characteristics of non-noble metal catalysts …

Go to article

Research Progresses In Improvement For Low Temperature Performance Of Lithium-Ion Batteries, Yue-Ru Gu, Wei-Min Zhao, Chang-Hu Su, Chuan-Jun Luo, Zhong-Ru Zhang, Xu-Jin Xue, Yong Yang Oct 2018

Research Progresses In Improvement For Low Temperature Performance Of Lithium-Ion Batteries, Yue-Ru Gu, Wei-Min Zhao, Chang-Hu Su, Chuan-Jun Luo, Zhong-Ru Zhang, Xu-Jin Xue, Yong Yang

Journal of Electrochemistry

Lithium-ion batteries (LIBs) have become a new research hotspot due to their high energy density and long service life. However, the temperature characteristics, especially the poor performance at low temperatures, have seriously limited their wider applications. In this report, the research progresses in the low temperature performance of LIBs are reviewed. The main existing limitations of LIBs at low temperatures were systematically analyzed, and followed by discussion on the recent improvements in low temperature performances by developing novel cathode, electrolyte, and anode materials. The developments for improving the low temperature performance of LIBs are prospected. The three most important factors …

Go to article

Synthesis Of Keggin Polyoxometalates Modified Carbon Paste Electrode As A Sensor For Dopamine Detection, Peng-Fei Dong, Na Li, Hai-Yan Zhao, Min Cui, Cong Zhang, Ju-Jie Ren, Xue-Ping Ji Oct 2018

Synthesis Of Keggin Polyoxometalates Modified Carbon Paste Electrode As A Sensor For Dopamine Detection, Peng-Fei Dong, Na Li, Hai-Yan Zhao, Min Cui, Cong Zhang, Ju-Jie Ren, Xue-Ping Ji

Journal of Electrochemistry

Polyoxometalates, a class of anionic clusters with structure diversity and size variability, make them very attractive in many fields such as electrochemistry, catalysis and medicine. The Co(C15N6H12)2[PW12O38]·5H2O(Co[PW12O38]) modified carbon paste electrode was prepared in this work, and its electrochemical performances as the sensor for dopamine detection were characterized with electrochemical impedance spectroscopy, cyclic voltammetry and differential pulse voltammetry. The preparation conditions and test conditions were optimized respectively. Under the optimized conditions, the POMs modified carbon paste electrode exhibited good selectivity and sensitivity …

Go to article

Effects Of Sulfur-Containing Additive On Low Temperature Performance Of Graphite Anode, Ze-Li Wu, Ye-Zhen Zheng, Zhong-Ru Zhang, Yong Yang Oct 2018

Effects Of Sulfur-Containing Additive On Low Temperature Performance Of Graphite Anode, Ze-Li Wu, Ye-Zhen Zheng, Zhong-Ru Zhang, Yong Yang

Journal of Electrochemistry

The low temperature performance of lithium ion battery mainly depends on the graphite anode, and one of the research focuses is to improve the low temperature performance of the anode by additives. In this paper, the effects of different sulfur-containing functional groups such as DTD (ethylene sulfate), 1,3-PS (1,3-propane sultone) and ES (ethylene sulfite) on low temperature performances of artificial graphite materials were systematically studied. The results in density functional theory (DFT) calculations, cyclic voltammetry (CV), scanning electron microscopy (SEM) and charge-discharge measurement clearly demonstrated that all three sulfur-containing additives could participate in formation of films on the surface of …

Go to article

Electrodeposition Of Cobalt From Eutectic-Based Ionic Liquid, Rostom Ali M., Sankar Saha S, Ziaur Rahman Md Oct 2018

Electrodeposition Of Cobalt From Eutectic-Based Ionic Liquid, Rostom Ali M., Sankar Saha S, Ziaur Rahman Md

Journal of Electrochemistry

The electrodeposition of cobalt from a solution containing cobalt chloride in either a urea-choline chloride based or an ethylene glycol (EG)-choline chloride based ionic liquid has been carried out onto copper and steel cathodes by constant current and constant potential methods at different temperatures. The influences of various experimental conditions on electrodeposition and morphology of the deposited layers have been investigated by scanning electron microscopy (SEM) and X-ray diffraction (XRD)technique. It has been shown that the smooth, shiny with good adherence and bright metallic coloured cobalt coatings were obtained from both urea and EG based ionic liquids at the applied …

Go to article

Recent Progress In Organic Redox Flow Batteries, Li-Xing Xia, Hao Liu, Lin Liu, Zhan-Ao Tan Oct 2018

Recent Progress In Organic Redox Flow Batteries, Li-Xing Xia, Hao Liu, Lin Liu, Zhan-Ao Tan

Journal of Electrochemistry

Redox flow batteries (RFBs) are promising candidate for balancing instability of grids caused by integration of intermittent renewable energies such as solar energy and wind energy. Along with wide deployments in solar energy and wind energy due to abundance and declining installation cost, it can be predicted that RFBs will enter a period of rapid development. Basically,RFBs are electrochemical energy storage devices that decouple energy and power of the system by storing liquid electrolyte in tanks outside battery system itself. Such a unique framework makes RFBs flexible and fulfills the various demands of grids. During battery operation, redox-active species are …

Go to article

The New Application Of Battery-Electrode Reaction: Decoupled Hydrogen Production In Water Electrolysis, Yuan-Yuan Ma, Zhao-Wei Guo, Yong-Gang Wang, Yong-Yao Xia Oct 2018

The New Application Of Battery-Electrode Reaction: Decoupled Hydrogen Production In Water Electrolysis, Yuan-Yuan Ma, Zhao-Wei Guo, Yong-Gang Wang, Yong-Yao Xia

Journal of Electrochemistry

Hydrogen has been considered as a promising alternative to unsustainable fossil fuels because of its high calorific value, clean and abundant resources. Water electrolysis combined with renewable energy is regarded as the best way for hydrogen production, which will become the foundation of future hydrogen economy. For the past few years, many efforts have been employed to develop the cheap and high-performance catalyst for hydrogen evolution reaction and oxygen evolution reaction. However,the coupled hydrogen and oxygen evolution and the use of the expensive membrane have greatly restricted the flexibility of the conventional water electrolysis, and hindered the utilization of renewable …

Go to article

Design Strategies Toward Highly Active Electrocatalysts For Oxygen Evolution Reaction, Tang Tang, Wen-Jie Jiang, Shuai Niu, Jin-Song Hu Oct 2018

Design Strategies Toward Highly Active Electrocatalysts For Oxygen Evolution Reaction, Tang Tang, Wen-Jie Jiang, Shuai Niu, Jin-Song Hu

Journal of Electrochemistry

Electrocatalytic water splitting is pivotal for efficient and economical production of hydrogen and oxygen gasses. However, the efficiency of the whole device is largely limited by the oxygen evolution reaction (OER) at the anode due to its sluggish kinetics. Thus, it is imperative to develop inexpensive, highly active OER catalysts to lower the reaction barriers. By examining the underlying critical factors for OER performance, this review outlines general principles for designing efficient nanosized OER catalysts, including (1) enhancing the intrinsic activity of active site by electronic modulation, crystallinity modulation, phase control, defect engineering and spin state engineering; (2) designing appropriate …

Go to article

Photocatalytic Activity: Experimental Features To Report In Heterogeneous Photocatalysis, Md. Ariful Hoque, Marcelo I. Guzman Oct 2018

Photocatalytic Activity: Experimental Features To Report In Heterogeneous Photocatalysis, Md. Ariful Hoque, Marcelo I. Guzman

Chemistry Faculty Publications

Heterogeneous photocatalysis is a prominent area of research with major applications in solar energy conversion, air pollution mitigation, and removal of contaminants from water. A large number of scientific papers related to the photocatalysis field and its environmental applications are published in different journals specializing in materials and nanomaterials. However, many problems exist in the conception of papers by authors unfamiliar with standard characterization methods of photocatalysts as well as with the procedures needed to determine photocatalytic activities based on the determination of “apparent quantum efficiencies” within a wavelength interval or “apparent quantum yields” in the case of using monochromatic …

Go to article

Current-Driven Production Of Vortex-Antivortex Pairs In Planar Josephson Junction Arrays And Phase Cracks In Long-Range Order, Francisco Estellés-Duart, Miguel Ortuño, Andrés M. Somoza, Valerii M. Vinokur, Alex Gurevich Oct 2018

Current-Driven Production Of Vortex-Antivortex Pairs In Planar Josephson Junction Arrays And Phase Cracks In Long-Range Order, Francisco Estellés-Duart, Miguel Ortuño, Andrés M. Somoza, Valerii M. Vinokur, Alex Gurevich

Physics Faculty Publications

Proliferation of topological defects like vortices and dislocations plays a key role in the physics of systems with long-range order, particularly, superconductivity and superfluidity in thin films, plasticity of solids, and melting of atomic monolayers. Topological defects are characterized by their topological charge reflecting fundamental symmetries and conservation laws of the system. Conservation of topological charge manifests itself in extreme stability of static topological defects because destruction of a single defect requires overcoming a huge energy barrier proportional to the system size. However, the stability of driven topological defects remains largely unexplored. Here we address this issue and investigate numerically …

Go to article

Complex Coordination Silver Electrocrystallization Mechanism On Glassy Carbon Electrode Surface, Shuai-Shuai Huang, Cheng Liu, Lei Jin, Fang-Zu Yang, Zhong-Qun Tian, Shao-Min. Zhou Aug 2018

Complex Coordination Silver Electrocrystallization Mechanism On Glassy Carbon Electrode Surface, Shuai-Shuai Huang, Cheng Liu, Lei Jin, Fang-Zu Yang, Zhong-Qun Tian, Shao-Min. Zhou

Journal of Electrochemistry

Cyclic voltammetry and potential step methods were successfully used to study the electrochemical crystallization mechanism of silver deposition on glassy carbon electrode (GCE) in the practical cyanide-free silver plating electrolyte containing composite complexing agents. Scharifker-Hill (SH) theory was used to fitting the experimental data. The results showed that the electrodeposition of silver is a diffusion controlled irreversible electrode process according to three-dimensional instantaneous nucleation mechanism. When the step potential shifted from -750 mV to -825 mV, the peak deposition current Im was increased, while the induced nucleation time tm shortened. The calculated kinetic parameters showed that the diffusion coefficient (D) …

Go to article

Preparation And Characterization Of Self-Supporting Flexible Nitrogen-Doped Carbon Fabric Electrodes, Bo Yang, Zhi-Hang Jin, Ya-Ping Zhao, Zai-Sheng Cai Aug 2018

Preparation And Characterization Of Self-Supporting Flexible Nitrogen-Doped Carbon Fabric Electrodes, Bo Yang, Zhi-Hang Jin, Ya-Ping Zhao, Zai-Sheng Cai

Journal of Electrochemistry

With the wide applications of intelligent wearable devices in various fields, developing a new generation of flexible energy storage devices has become a major challenge for the current technology. As a wide application of wearable flexible substrate, cotton fabric has the advantages over low price, non-toxic and environmental friendly, but the poor conductivity becomes a major problem limiting its development. As a nitrogen-containing conducting polymer, polypyrrole is traditionally used as electrode materials, but poor mechanical performance and cycle stability severely limit its application in electrode materials. In this article, a self-supporting flexible nitrogen-doped carbon fabric electrode was prepared by in …

Go to article

Hybrid Battery-Capacitor System Based On Liti5O12 Anode And Ptpan Cathode, Xiu-Li Su, Xiao-Li Dong, Yao Liu, Yong-Gang Wang, Ai-Shui Yu Aug 2018

Hybrid Battery-Capacitor System Based On Liti5O12 Anode And Ptpan Cathode, Xiu-Li Su, Xiao-Li Dong, Yao Liu, Yong-Gang Wang, Ai-Shui Yu

Journal of Electrochemistry

Owing to its high safe, high rate and long life characteristics, lithium titanate (Li4Ti5O12) anode material has attracted extensive attention in recent years, and many efforts are being made to develop the Li4Ti5O12 based high performance hybrid supercapacitors and Li-ion batteries. Herein, we prepared the organic cathode material polytriphenylamine (PTPAn) through chemical oxidation and polymerization of triphenylamine (TPAn), and investigated its charge storage mechanism and electrode kinetics withthe typical electrochemical methods in an organic electrolyte. It was demonstrated that the PTPAn exhibited the reversible capacity of 85 mA·g-1 …

Go to article

Electrochemical Performances Of Neodymium Doped Lead Dioxide Composite Anode, Hong-Hui Wang, Ming-Jie Ma, Jie Feng, Huang-Ya Kang, Wen-Jie Huang Aug 2018

Electrochemical Performances Of Neodymium Doped Lead Dioxide Composite Anode, Hong-Hui Wang, Ming-Jie Ma, Jie Feng, Huang-Ya Kang, Wen-Jie Huang

Journal of Electrochemistry

Neodymium (Nd) doped titanium (Ti)-based lead dioxide (PbO2) composite anode was prepared by electrodeposition. The surface morphologies and crystal structures of the as-prepared anodes were characterized by scanning electron microscopy (SEM) and X-ray diffraction (XRD) technique, respectively. The electrochemical performances of PbO2-Nd anode were studied by electrochemical impedance spectroscopy, linear sweep voltammetry and cyclic voltammetry. Additionally, the electrocatalytic activity and durability of PbO2-Nd anode were investigated through the degradation of simulative refractory organic wastewater of phenol. The results showed that Nd doping made the PbO2 anode surface structure dense and uniform with smaller …

Go to article

Assemblies And Properties Of Asymmetric Supercapacitors Based On Wo3/Carbon Cloth, Wen-Ke Shao, Lei Zhao, Chao Liu, Yan-Ying Dong, Yuan-Jie Zhu, Qiu-Fan Wang Aug 2018

Assemblies And Properties Of Asymmetric Supercapacitors Based On Wo3/Carbon Cloth, Wen-Ke Shao, Lei Zhao, Chao Liu, Yan-Ying Dong, Yuan-Jie Zhu, Qiu-Fan Wang

Journal of Electrochemistry

The demand for a new generation of flexible, portable, and high-capacity power sources increases rapidly with the development of advanced wearable electronic devices. One dimensional (1D) nanowires structures have been demonstrated as one of the most ideal electrode materials in energy storage systems due to their advantages in both micorstructures and their high surface areas. Here we report a simple process for large-scale fabrication of self-standing composite film electrodes composed of WO3 nanorods on carbon cloth. In order to improve the energy density of supercapacitor, we assembled an asymmetric supercapacitor using WO3 nanorods and activated carbon cloth as …

Go to article

Preparations Of Nano-Manganite Loaded Titanium Electocatalytic Membrane Electrode For Phenolic Wastewater Treatment, Le Li, Hong Wang, Rong-Hua Ma, Hong-Sen Hui, Xiao-Ping Liang, Jian-Xin Li Aug 2018

Preparations Of Nano-Manganite Loaded Titanium Electocatalytic Membrane Electrode For Phenolic Wastewater Treatment, Le Li, Hong Wang, Rong-Hua Ma, Hong-Sen Hui, Xiao-Ping Liang, Jian-Xin Li

Journal of Electrochemistry

Nano-manganese oxide loaded on titanium electrocatalytic membrane electrodes (nano-MnOx/Ti) were synthesized bysol-gel method using porous Ti membrane as a substrate and the manganese acetate as a raw material without releasing NOx. X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and Field-emission scanning electron microscopy (FESEM) were employed to characterize crystal form, valence state and surface morphology of nano-MnOx, respectively. Cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and chronoamperometry (CA) were used to investigate the electrochemical properties of nano-MnOx electrode. The results indicated that the MnOx catalysts consisted of γ-MnO2 and Mn2 …

Go to article

Electrochemical Preparation And Photo-Electro Catalytic Properties Of Flexible Znni/Al-Ldhs/Carbon Fibers Composite, Jing-Jing Tian, Tao Chen, Xing-Chen Bao, Meng-Xu Gao, Ye-Xiao Yu, Si-Yao Peng, Guan-Ping Jin Aug 2018

Electrochemical Preparation And Photo-Electro Catalytic Properties Of Flexible Znni/Al-Ldhs/Carbon Fibers Composite, Jing-Jing Tian, Tao Chen, Xing-Chen Bao, Meng-Xu Gao, Ye-Xiao Yu, Si-Yao Peng, Guan-Ping Jin

Journal of Electrochemistry

In this work, a promising flexible composite consisting of zinc (Zn), nickel (Ni) and aluminum (Al) layered double hydroxide coated carbon fibers (ZnNi/Al-LDHs/CFs) was prepared by electrochemical method with convenient recovery and separation. The structures, morphologies, and photo-electro catalytic properties of ZnNi/Al-LDHs/CFs were characterized by X-ray diffraction, infrared spectroscopy, field emission scanning electron microscopy, inductively coupled plasma atomic emission spectrometry and electrochemical impedance spectroscopy techniques. The excellent photo-electro bifunctional catalytic properties were obtained with the ZnNi/Al-LDHs/CFs composite as compared to that of Zn/Al-LDHs/CFs (photo catalyst) or Ni/Al-LDHs/CFs (electrocatalyst) alone, which could be used in the electro-catalytic oxidations of methanol and …

Go to article

An Aqueous All-Metal Oxide Asymmetric Supercapacitor With High Gravimetric And Volumetric Energy Densities, Xin Jing, Xu Zhang, Wei Wang, Jun-Wei Lang Aug 2018

An Aqueous All-Metal Oxide Asymmetric Supercapacitor With High Gravimetric And Volumetric Energy Densities, Xin Jing, Xu Zhang, Wei Wang, Jun-Wei Lang

Journal of Electrochemistry

Only with both high gravimetric and high volumetric energy densities, can supercapacitors find more extensive applications.In this paper, by making good use of the interesting nanostructures and the high packing densities of RuO2 (nanoshpheres,1.69 g·cm-3) and Co-Ni oxide (nanoflakes, 2.14 g·cm-3), the RuO2//KOH//Co-Ni oxide all-metal oxide asymmetric supercapacitors with high performance were successfully fabricated, which led to the maximum specific capacitance of 217.5 F·g-1 (412.3 F·cm-3) and specific energy density of 61.8 Wh·kg-1 (121 Wh·L-1) in a cell voltage between 0 and 1.5 V in KOH electrolyte. …

Go to article

Highly Crystalline Nickel Borate Nanorods As Oxygen Evolution Reaction Electrocatalysts, Xi Xu, Juan Liu, Hua-Zong Wu, Wen-Jie Jiang Aug 2018

Highly Crystalline Nickel Borate Nanorods As Oxygen Evolution Reaction Electrocatalysts, Xi Xu, Juan Liu, Hua-Zong Wu, Wen-Jie Jiang

Journal of Electrochemistry

Hydrogen energy, a kind of clean and renewable energy, is considered to be the solution to the problems of energy crisis and environmental deterioration. Electrochemical water splitting is an efficient and promising technology for the production of high-purity hydrogen. However, oxygen evolution reaction (OER) at the anode of water electrolyzer limits the efficiency of water splitting due to the high overpotential. Therefore, the challenges still remain for the exploration of highly active, stable and low-cost catalysts with superior activity for OER. Herein, nickel borate nanorods with high crystallinity were prepared via high-temperature calcination. The as-obtained nickel borate nanorods with 2 …

Go to article

Influences Of Na-Mn Ratio On Electrochemical Performances And Intercalation-Deintercalation Processes Of Sodium Ion In NaXMno2, Yong-Chun Xie, Cheng Wang, Fang Jiang, Yang Yang, Jing Su, Yun-Fei Long, Yan-Xuan Wen Aug 2018

Influences Of Na-Mn Ratio On Electrochemical Performances And Intercalation-Deintercalation Processes Of Sodium Ion In NaXMno2, Yong-Chun Xie, Cheng Wang, Fang Jiang, Yang Yang, Jing Su, Yun-Fei Long, Yan-Xuan Wen

Journal of Electrochemistry

In this work, NaxMnO2 was synthesized by a solid-state reaction. The influences of Na:Mn ratio on the structure, morphology and electrochemical performance, and sodium ion intercalation/deintercalation processes were characterized by X-ray diffraction, X-ray photoelectron spectroscopy, field emission scanning electron microscopy, cyclic voltammetry, electrochemical impedance spectroscopy and galvanostatic charge-discharge test. The prepared NaxMnO2 was mainly composed of Na0.7MnO2 and Na0.91MnO2, and the content of Na0.91MnO2 increased with the increase of Na:Mn ratio. However, the activation energy values of surface membrane diffusion, interfacial electrochemical reaction and …

Go to article

Pnnl Dark Matter Bubble Chamber, Ryan Robinson Aug 2018

Pnnl Dark Matter Bubble Chamber, Ryan Robinson

STAR Program Research Presentations

The Pacific Northwest National Laboratory (PNNL) prototype bubble chamber is intended to address issues encountered with the current PICO dark matter search detectors and improve the functionality of future experimental designs. The PNNL bubble chamber accomplishes this with a simplified interface between the hydraulic pressure controls and the target vessel and altering the standard chamber design such that it can be easily exchanged and replaced with vessels of various sizes and materials for testing purposes. The chamber itself is a glass vessel which houses perfluorobutane and holds the target fluid above room temperature and atmospheric pressure. The target fluid becomes …

Go to article

Full Field Computing For Elastic Pulse Dispersion In Inhomogeneous Bars, A. Berezovski, R. Kolman, M. Berezovski, D. Gabriel, V. Adamek Jul 2018

Full Field Computing For Elastic Pulse Dispersion In Inhomogeneous Bars, A. Berezovski, R. Kolman, M. Berezovski, D. Gabriel, V. Adamek

Publications

In the paper, the finite element method and the finite volume method are used in parallel for the simulation of a pulse propagation in periodically layered composites beyond the validity of homogenization methods. The direct numerical integration of a pulse propagation demonstrates dispersion effects and dynamic stress redistribution in physical space on example of a one-dimensional layered bar. Results of numerical simulations are compared with analytical solution constructed specifically for the considered problem. Analytical solution as well as numerical computations show the strong influence of the composition of constituents on the dispersion of a pulse in a heterogeneous bar and …

Go to article

First Prev Next Last