Engineering Science and Materials Commons^™

Development And Validation Of A Model For Granular Material Volume Measurements, Pourya Fasounaki

Department of Industrial and Management Systems Engineering: Dissertations, Theses, and Student Research

Keeping inventory record of packed grains in silos poses challenges since the bulk material’s different segments do not discharge uniformly, leading to formation of random peaks and valleys on the surface. To facilitate obtaining accurate volume measurement of the grains by taking into account this non-linear behavior on the surface, laser or plumb-bob level-sensing devices are employed at different part of the surface to probe the level of material under those regions.

The main goals of this research is to study the behavior of granular material in silo while discharging downward and by doing so, differentiate certain flow patterns formed …

A Digital Hydraulic Valve, Actuated Using A Piezoelectric Linear Motor, Brian C. Bevill

Purdue Polytechnic Directed Projects

Proportional control in hydraulics is widely utilized. The most widely used current types of proportional valves utilize solenoid technology. While this technology has been around for decades and has been proven an effective means of control, there is always a demand for improved performance of advancing technologies. Integrating piezoelectric devices as a means to control hydraulic systems helps advance control for hydraulic systems.

Piezoelectric stack devices have been used to control hydraulic systems with success. Advantages of these stacks include being relatively small with a high power to weight ratio, using less energy than solenoid operations, and being fast acting. …

A Study On Facility Planning Using Discrete Event Simulation: Case Study Of A Grain Delivery Terminal, Sarah M. Asio

Department of Industrial and Management Systems Engineering: Dissertations, Theses, and Student Research

The application of traditional approaches to the design of efficient facilities can be tedious and time consuming when uncertainty and a number of constraints exist. Queuing models and mathematical programming techniques are not able to capture the complex interaction between resources, the environment and space constraints for dynamic stochastic processes. In the following study discrete event simulation is applied to the facility planning process for a grain delivery terminal. The discrete event simulation approach has been applied to studies such as capacity planning and facility layout for a gasoline station and evaluating the resource requirements for a manufacturing facility. To …

Case Studies: In-Situ Rebuilding Of Damaged Rope Drum Shafts Of Ssg Crane And The Repair Of Circumferential Crack Of Cement Kiln By Welding, Joseph Runyoro

Tanzania Journal of Engineering and Technology (TJET)

Material failures in engineering are characterized by unwanted downtime of equipment and require the application of sound engineering principles to rectify the problem so that it does not reoccur. The most widely method for repairing damaged steel structures such as rope drum shaft or cracked cement kiln is by Manual metal arc welding. The equipment mentioned have their main importance that, when they are broken down, they cost a lot of money in lost revenue and affects a lot of people in terms of business and livelihood. The nominal diameter (DN) 240 rope drum shaft was damaged when the roller …

Design, Reconstruction And Evaluation Of A Dynamometer For Quarter Scale, Samuel Sanchez

BioResource and Agricultural Engineering

This project discusses the design, reconstruction, and evaluation of a dynamometer. A new test stand for the Quarter Scale team would improve the testing of the engines and the Continuously Variable Transmission (CVT). All the readings will be done electronically in order to provide the most accurate data collection. The dynamometer will be a closed hydraulic system for ease of use. This system will be able to test all of Quarter Scale engines. The data collected will be used to determine which engines are in the best condition, and which may need to be fixed. With the new design, the …

Application Of Systems Engineering To Rapid Prototyping For Close Air Support, John M. Colombi, Richard G. Cobb

Faculty Publications

Twenty-first century military operations have brought forth many new challenges for the Armed Forces of the United States. One such challenge is with new operating environments, where current systems are not always effective. While it is desirable to apply a systems engineering approach to best meet critical user needs, there may be a misconception that systems engineering requires a lengthy and detailed process not nimble enough for a rapid prototyping effort. This article describes how a classic systems engineering methodology was successfully tailored to the rapid development of potential material solutions to meet a critical operational need. Key observations are …

Performance Analysis Of Coal-Fired Boiler And Natural Gas Fired Boiler At Morehead State University, Devender Banne

Morehead State Theses and Dissertations

A thesis presented to the faculty of the College of Science & Technology at Morehead State University in partial fulfillment of the requirements for the Degree of Master of Science by Devender Banne on May 4, 2009.

Order And Disorder, Entropy In Math, Science, Nature And The Arts, Sol Neeman Ph.D., Arie Maharshak

Engineering Studies Faculty Publications and Creative Works

Often, science and engineering students have difficult time in viewing certain concepts in their holistic form. An example for such a concept is the concept of Entropy. Although it originated from the field of thermodynamics, the relation between order and disorder is a profound one and manifests itself in various fields, sometimes unrelated, such as math and science, nature and the arts. In the discipline of physics, the amount of disorder in a system has been quantified by the concept of Entropy. In the area of information theory it provides a quantitative measure of the amount of compression that may …

Socio-Economic Impacts Of Computer Viruses In Tanzania, M Victor

Tanzania Journal of Engineering and Technology (TJET)

This paper reports on a research project conducted with an objective of identifying and assessing various approaches used by different computer users (Management, System Administrators and end users) in Tanzania to combat computer viruses (CVs), and to assess users' awareness level on CVs. Specifically, the study aimed at assessing the awareness level on CVs to the Tanzanian business community; analyze the socio -economic impact caused by CVs in Tanzania and; assess existing methods, capacity and limitations on controlling CVs in Tanzania. Data was collected using both questionnaires and interview from financial institutions such as NBC and BOT, and telecommunications sector …

Managing The Transformation Of System Of Systems Engineering, Samuel F. Kovacic, Andres Sousa-Poza

Engineering Management & Systems Engineering Faculty Publications

SOSE methodologies exist that support engineering difficult and disparate systems with a technical solution. However, from literature it is apparent that there is a need for a formal methodology and methods that govern engineering of System of Systems (SOS) beyond the technical solution. This paper presents some of the current thinking being undertaken at NCSOSE (National Centers for Systems of Systems Engineering), on what is driving the development of SOSE, and a hypothesized solution to this problem. The purpose is to offer a different approach for resolving complexity within a situation. The paper concludes with an initial derivative of a …

Managing The Transformation Of System Of Systems Engineering, Samuel F. Kovacic, Andres Sousa-Poza

Engineering Management & Systems Engineering Faculty Publications

SOSE methodologies exist that support engineering difficult and disparate systems with a technical solution. However, from literature it is apparent that there is a need for a formal methodology and methods that govern engineering of System of Systems (SOS) beyond the technical solution. This paper presents some of the current thinking being undertaken at NCSOSE (National Centers for Systems of Systems Engineering), on what is driving the development of SOSE, and a hypothesized solution to this problem. The purpose is to offer a different approach for resolving complexity within a situation. The paper concludes with an initial derivative of a …

Review Of The Product Development Process And Information Flow In The Manufacturing Industry: Problems And A Possible Wav Forward, E Opiyo

Tanzania Journal of Engineering and Technology (TJET)

No abstract provided.

Developing A Methodology To Detect Partial Failures For Dynamic Systems, Anwar A. Al-Jowder

Engineering Management & Systems Engineering Theses & Dissertations

The purpose of this research is to develop a decision support system that can assist in detecting partial failures in dynamic systems such as Fire Control System Tracking Radar (TR) onboard Naval Ships. Partial failures do not necessarily shut down the system immediately but cause degradation of operational performance. Previous work has shown that experts in the field of failure detection, test point insertion and Built-In-Test Equipment (BITE) can provide useful input in detecting partial failures. Partial failures affect operational system performance and support costs, which can be significant. Often, however, partial failure detection consists of the estimations and opinions …

Yucca Mountain Ventilation Studies Support And Associated Code Enhancements, George Danko

Publications (YM)

The Task 20 project was prematurely closed by DOE on the basis of becoming critical data to the Yucca Mountain project. Task 20 indeed delivered the first, published hydrothermal-ventilation model, MULTIFLUX V1.0 and V1.1 to BSC during 2001 to support the AMR Rev01 report. The numerical model is designed to predict temperature and humidity distributions in and around the emplacement drifts and on the waste packages stored in a ventilated, high-level nuclear waste repository.

Application Of Wavelets And Principal Component Analysis In Image Query And Mammography, Sol Neeman Ph.D.

Engineering Studies Faculty Publications and Creative Works

Breast cancer is currently one of the major causes of death for women in the U.S. Mammography is currently the most effective method for detection of breast cancer and early detection has proven to be an efficient tool to reduce the number of deaths. Mammography is the most demanding of all clinical imaging applications as it requires high contrast, high signal to noise ratio and resolution with minimal x-radiation. According to studies [36], 10% to 30% of women having breast cancer and undergoing mammography, have negative mammograms, i.e. are misdiagnosed. Furthermore, only 20%-40% of the women who undergo biopsy, have …

Application Of Vibrational Techniques In Determination Of Dynamic Properties Of Agricultural Products-State Of The Arton Of Vibrational Techniques In Determination Of Dynamic Properties Of Agricultural Products-State Of The Art, Silas Kajuna

Tanzania Journal of Engineering and Technology (TJET)

Vibration is one of the techniques employed in the determination of dynamic properties of fruits and vegetables. It entails generation of a mechanical or acoustic vibrational signal which is propagated through the flesh of the agricultural material. A transducer is either attached or held close to the specimen to monitor the propagation of the signal through the specimen. The manner in which the signal is transmitted through the material is analyzed, and the dynamic properties of the specimen which relate to its firmness or its internal being are derived. The technique has been around for the past 30 years or …

Combining Wavelets And Hotelling Transforms In Image Query, Sol Neeman Ph.D.

Engineering Studies Faculty Publications and Creative Works

In the "content based" image query, also referred to as "query by example," "similarity retrieval" or "sketch retrieval," the query image is provided by the user either as a sketch of the object, as the output of a scanner or a video camera. Some of the difficulties associated with content based image query are described in [1], e.g. significant difference between the "query image" and the "target image," artifacts and poor resolution of the query image make a straightforward comparison of images using L1 and l2 metrics not effective.

In [2] a new strategy is suggested based on wavelet decomposition …

Arts, Computers And Artificial Intelligence, Sol Neeman Ph.D.

Engineering Studies Faculty Publications and Creative Works

Science and art seem to belong to different cultures. Science and technology, mainly the products of the intellect, use terminology and vocabulary that are concise and well defined. In contrast, in artistic expression, ambiguity is a powerful component. Still the relationship between these two different categories of human activity is interesting and fascinating. In this paper, a general comparison of these two disciplines will be introduced. Then the possibility of mechanical creation of art using computers and artificial intelligence will be discussed. This will be followed by two techniques which are used to create poetry and music. First, a statistical …

Incorporating Matlab's Signal Processing Toolbox Into A Dsp Course At An Undergraduate E.E. Program, Sol Neeman Ph.D.

Engineering Studies Faculty Publications and Creative Works

This paper provides some suggestions for incorporating MATLAB's Signal Processing Toolbox into a DSP course. Often, in a DSP course, students have difficulties understanding abstract and non-intuitive concepts and seeing their relevance to the practical part of their curriculum. The tools offered by MATLAB's Signal Processing Toolbox, can help to make these concepts more tangible and provide a perspective for students. Some basic tools relevant to an undergraduate DSP course will be introduced, including examples of tool use and graphic results. The tools presented will be applied in the areas of synthesis and analysis of signals, FFT computation, impulse response …

Using Matlab To Illustrate The 'Phenomenon Of Aliasing', Sol Neeman, Ph.D.

Engineering Studies Faculty Publications and Creative Works

The phenomenon of aliasing is important when sampling analog signals. In cases where the signal is bandlimited, one can avoid aliasing by ensuring that the sampling rate is higher than the Nyquist rate . But in cases where the signal is not bandlimited , aliasing is unavoidable if the signal is not filtered before it is sampled. It is then crucial to understand the phenomenon in order to estimate the distortion generated when the signal is reconstructed from its samples. Using the software package MATLAB by MathWorks, Inc ., two examples are presented. The first is a pure sinusoid which …

Improved Heat Transfer By Means Of Steam Injection In A Shell & Tube Heat Exchanger, O Kaunde

Tanzania Journal of Engineering and Technology (TJET)

When designing a heat exchanger; one aims at attaining high heat transfer rates SO as to minimise heat transfer area and therefore the overall cost. This paper presents a method of improving the overall heat travsfer coef- ficient of a conventional shell and tube heal exchanger. The method in- volves injecting steam into the process fluid as it enters the heat exchanger thus effecting mixing of fluid as it travels along the exchanger Tests car- • ried out using this technique showed a significant increase in the overall heat transfer coefficient values.

Measurement Of Dust Resistivity And The Effect Of Filter Operating Parameters On Its Value, S Issangya

Tanzania Journal of Engineering and Technology (TJET)

Methods of measuring electrical sensitivity of a dust layer have been outlined and the porous electrodes cell was used to measure the electrical resistivity of a dust layer and to determine the influence of various parameters. Dust layer thickness and applied voltage had no influence. Resistivity depended on particle size, packing density, temperature, and air relative humidity. Glass beads and limestone powders of different mean particle sizes were used. Temperature was varied from 20–100 °C and air moisture ranged from dry to near saturation. The results may help in understanding the performance of electrically enhanced fabric filters, which are influenced …

Design Approach For Small Scale Continuous, Steady State Plants, O Kaunde

Tanzania Journal of Engineering and Technology (TJET)

One of the major steps in the design of a process plant is development of an appiopriate flowsheet. At this step, the technical solutions may be con- sidered in relation to the social and economic factors. In this paper, guide- lines for developing a flowsheet for continuous, steady State process in a developing country environment have been proposed. To illustrate the pro- posed guidelines, a case study involving design of an ethanol distillation plant has been used.

Quality Problems Facing Tanzanian Industrial Firms, M Msafiri

Tanzania Journal of Engineering and Technology (TJET)

This paper reports on the results of a study of quality problems facing Tanzanian industrial firms. The results show that Tanzanian firms do not set goals with respect to quality and quality management, thus their qual- ity performance is generally poor. A Ithough there are a number of opera- tional problems constraining the companies, the main problems lie with the internal management of the quality function. Extensive ideas and sug- gestions for improving the performance of the quality function are given.

Optimum Design For Spring With Orthogonal Design Method, Han Fu - Jie

Tanzania Journal of Engineering and Technology (TJET)

Orthogonal design method is a sort of direct optimum method, by which the op- timal result may be obtained through simple computation and analysis. This method has gained increasingly extensive interest in scientific research, engineering design, end production management as well. The orthogonal table is the basic instrument for carrying out optimum design with orthogonal design method. It is a mathernatical table established On the basis Of the idea of isostatic distribution. As various levels may appear in any column, it makes a partial experiment contain levels of all factors furthermore. RII combina- tions of any two columns may appear …

Comparison Of Digital Controllers Used In Magnetic Suspension And Balance Systems, William A. Kilgore

Mechanical & Aerospace Engineering Faculty Publications

Dynamic systems that were once controlled by analog circuits are now controlled by digital computers. Presented is a comparison of the digital controllers presently used with magnetic suspension and balance systems. The overall responses of the systems are compared using a computer simulation of the magnetic suspension and balance system and the digital controllers. The comparisons include responses to both simulated force and position inputs. A preferred digital controller is determined from the simulated responses.

Production Of Blanking Circles And Dies - An Appropriate Method, V Bhandari

Tanzania Journal of Engineering and Technology (TJET)

A large important blanking die for production of multiwick stoves oil tanks was damaged beyond repair during normal maintenance. A replacement die could not be made available immediately. Initially an alternative blank production system based upon the adaptation of the inhouse and locally available tools was set up. Subsequently a temporary low cost and a permanent replacement blanking die was designed, developed and manufactured out of pad welding of mild steel plate. Recommendations have been drawn in light of the experiences gained in the deployment of these appropriate methods.

Distributive Mixing Performance Of Rubber Internal Mixers, B Mutagahywa

Tanzania Journal of Engineering and Technology (TJET)

Results of experiments to study the distributive mixing performance of Internal mixers are reported in this paper. Distributive mixing was assessed by monitoring the uniformity of sulphur distribution throughout rubber mixes subjected to a range of rotor revolutions. The results indicate that distributive mixing in a well controlled Internal mixer is rapid and unlikely to be a source of mix variability.

Plough Parts Production At Ubungo Farm Implements, F Kavishe

Tanzania Journal of Engineering and Technology (TJET)

During the assessment of the manuscript, it was observed that the paper does not include an abstract. The document proceeds directry to the main content without providing a separate abstract that summarize the study's objectives, methodology, key findings and conclusions

Industrial Projects Recommended By The Faculty Of Engineering Udsm, W Kreuser

Tanzania Journal of Engineering and Technology (TJET)

During the assessment of the manuscript, it was observed that the paper does not include an abstract. The document proceeds directry to the main content without providing a separate abstract that summarize the study's objectives, methodology, key findings and conclusions