Engineering Science and Materials Commons^™

Biodiesel Production From Waste Cooking Oil Using A New Heterogeneous Catalyst Sro Doped Cao Nanoparticles, Apisit Prokaewa, Siwaporn Meejoo Smith, Apanee Luengnaruemitchai, Mathi Kandiah, Supakorn Boonyuen

Journal of Metals, Materials and Minerals

Biodiesel production from waste palm cooking oil (WPCO) was studied. Calcium oxide with a strontium ion additive (Sr-CaO) was employed as a catalyst in transesterification reaction of used palm oil with methanol. The Sr-CaO was synthesized by co-precipitation method between SrCl2 and Ca(NO3)2, then calcined at 900°C for 5 h. The catalyst was characterized by using thermo-gravimetric analysis (TGA), X-ray diffraction (XRD), Scanning electron microscope (SEM), and Fourier transform infrared spectrometer (FT-IR). The morphology and elements content of Sr and Ca in the catalyst were confirmed by SEM-EDX. The approximate catalyst diameter is 12.6±5.9 µm. The highest conversion was 99.33% …

Study Of The Effect Of Ph, Conditioning And Flotation Time On The Flotation Efficiency Of Phosphate Ores By A Soybean Oil Collector, Zohra Farid, Mohamed Abdennouri, Noureddine Barka, Youness Jannani, M'Hamed Sadiq

Journal of Metals, Materials and Minerals

The mid-low grade of phosphate ore, rich by the silicate and carbonate gangue minerals needs a special treatment using the flotation process. Where the collectors play a pivotal role. This study was conducted to enrich an untreated phosphate ore (without washing, desliming, hydrocycling, etc.), with an eco-friendly and economic collector based on soybean oil. Different analytical techniques such as UV-Visible, ATR-FTIR spectrometric and XRD were used in order to analyse and characterize the flotation products. The effects of the parameters, pulp pH, conditioning time and flotation time on gangue removal efficiency by flotation, were investigated. Flotation tests were applied for …

The Finished Polyester Fabric With Hot Nh4oh Pretreatment And Mixed Zno-Zn(Oh)2 Nanoparticles For Hydrophobic Property, Samroeng Narakaew, Sittipong Au-Pree, Wipanoot Baison, Siwat Thungprasert, Itsariya Wattalo, Pranpreeya Jaipor, Theeraporn Promanan, Sukee Sukdee, Pakorn Santakij, Chainet Chanogkun, Kanjana Ruttanateerawichien, Aphiruk Chaisena, Pattama Apichai, Phiphop Narakaew

Journal of Metals, Materials and Minerals

This work aims to modify the hydrophobic coated polyester fabrics using 2%w/v ammonium hydroxide (NH4OH) at 90℃ prior and subsequently dipped in two difference aqueous zinc solution batchs containing 0.6%w/v zinc precursors with/without starch and NH4OH, finally dehydration, and characterized by the attenuated total reflection - Fourier transform Infrared (ATR-FTIR) and Raman spectroscopy (Raman), X-ray diffraction (XRD), Field emission scanning electron microscope (FE-SEM), Energy dipersive spectrometry (EDX), and Water contact angle (WCA) of 10 mL dropping at 23℃ and humidity of 63%. Raman spectra and XRD patterns results showed e-zinc hydroxide (e-Zn(OH)2), zinc oxide nanoparticle (ZnO NP) and ZnO-starch nanocomposite …

Epoxidized Natural Rubber/Silane Modified Silica Nanocomposites Prepared In Latex Stage, Supat Moolsin, Duangkamon Sawangkan

Journal of Metals, Materials and Minerals

Epoxidized natural rubber (ENR) was synthesized from natural rubber (NR) latex via in situ epoxidation using HCOOH and H2O2. The prepared ENR with 22 mol% epoxidation (ENR-22) was reinforced with silane modified silica (SMS) nanoparticles with different SMS loading in latex stage. The tensile properties, thermal stability, oil resistance and morphology of the ENR-22/SMS nanocomposites were investigated. The tensile strength was improved significantly and gained the maximum point at 7.5 phr SMS content. The thermogravimetric analysis showed an increased initial degradation temperature with the addition of SMS, suggesting higher thermal stability of the nanocomposites. The oil resistance of ENR-22/SMS nanocomposites …

Use Of Oil Palm Frond Waste To Reinforce Poly(Lactic Acid) Based Composites With The Improvement Of Interfacial Adhesion By Alkali Treatment, Nattakarn Hongsriphan, Jidapa Subsanga, Pimpisa Suebsai, Sunisa Sitthipong, Pajaera Patanathabutr

Journal of Metals, Materials and Minerals

Oil palm frond waste was used as reinforcing fibers for biodegradable poly(lactic acid) or PLA in order to produce green composites that increased the value of agricultural waste. The alkali-treated oil palm frond (OPF) fibers of 30 wt% or 40 wt% were compounded with PLA and moulded into specimens. The alkali treatment was 0 wt%, 1 wt%, 3 wt%, and 5 wt% of the fibers for compatibility improvement with PLA matrix. It was found that the alkali-treated PLA/OPF composites adding 30 wt% and 40 wt% had the flexural modulus to be about 55% and 75% higher than those without the …

Design, Development And Characterization Of A Mid-Frequency (35 Khz) Tonpilz Transducer Array From 0.675pmn-0.325pt Piezoceramics, Merve Nur Çiftçi, Berk Değirmenci, Irem Böbrek, Sedat Alkoy, Aykut Aykaç, Muhammet Boz, Ayşe Berksoy-Yavuz, Ezgi Yalcin, Namik K. Gozuacik, Ebru Menşur

Journal of Metals, Materials and Minerals

A mid-frequency tonpilz transducer array was designed and analyzed by finite element method using commercial ATILA code and constructed using piezoceramic rings with lead magnesium niobate (PMN)-lead titanate (PT) composition. The morphotropic phase boundary (MPB) 0.675Pb(Mg1/3Nb2/3)O3-0.325PbTiO3 composition was chosen to obtain higher performance from the transducer due to the superior dielectric and electromechanical properties of the MPB compositions. A pure perovskite phase was obtained from the ceramics. Piezoelectric charge coefficient (d33) was measured as 435 pC×N-1. Single tonpilz element and an array consisting of 7-unit array were constructed and later potted in polyurethane for underwater measurements. A second array was …

Amino-Containing Polymer-Coated Magnetite Nanoparticles As Nano-Adsorbents For Bisphenol A: Synthesis, Kinetic And Thermodynamic Study, Jakkrit Tummachote, Metha Rutnakornpituk, Duangdao Channei, Filip Kielar, Boonjira Rutnakornpituk

Journal of Metals, Materials and Minerals

Magnetite nanoparticles coated with poly(dimethyl aminoethyl methacrylate) (PDMAEMA@MNPs) and their quarternized form (PQDMAEMA@MNPs) were successfully synthesized and used as nano-adsorbents for bisphenol A (BPA). The particles were spherical with the average particle size between 10 and 20 nm in diameter with a moderate degree of nanoclustering (ca.150-200 particles/cluster). In terms of adsorption properties, the PDMAEMA@MNPs exhibited a higher BPA adsorption capacity (1.05 mg/g MNP at pH 9) than the quaternized form (0.50 mg/g MNP at pH 9). Equilibrium isotherm, kinetic, and thermodynamic characteristics of BPA adsorption on the PDMAEMA@MNPs were investigated. It was found that the BPA adsorption …

Elastic Properties Of Boro-Tellurite Glasses Doped With Europium Oxide, Chinnappareddy Devaraja, G. V. Jagadeesha Gowda, Bheemaiah Eraiah, G. K. Narasihma Murthy

Journal of Metals, Materials and Minerals

The glass series of xEu2O3-5PbO-25TeO2-(70-x) B2O3, where x=0.1 mol% to 0.6 mol% were prepared by employing the conventional melt quenching method. The non-crystallinity of prepared BTE glasses was examined by the X-ray diffraction method. The very important mechanical properties such as elastic moduli, Debye temperature, Poisson’s ratio, fractional bond connectivity, softening temperature, acoustic impedance, and the thermal expansion coefficient of the BTE glasses have been studied by measuring ultrasonic velocity. The experimental results indicate that the calculated parameters strongly depend on increasing Eu2O3 concentration. The elastic moduli of the prepared samples were found to decrease with Eu2O3 concentration and this …

Enhanced Photocatalytic Activity Of Zno Nanostructures Deposited On Mesh Through Electrochemical Deposition And Thermal Oxidation, Chantana Aiempanakit, Thongchai Phantaporn, Kamon Aiempanakit

Journal of Metals, Materials and Minerals

This article reported that the properties of zinc oxide (ZnO) nanostructures were modified by the thermal oxidation process at different temperatures in the range of 200℃ to 600℃ for 1 h. The Zn films were deposited on a stainless steel mesh by using the electrochemical deposition technique. The elemental composition of Zn and O was exhibited via energy-dispersed X-ray spectroscopy in which the atomic ratio of O/Zn increased with the increase of oxidation temperature. The results showed that oxidation temperature has a significant effect on the morphological and crystal structure. The nanosheet structure of the as-deposited film transferred to the …

Brazilein Modified Zinc Oxide Nanorods With Enhanced Visible Light-Responsive Photocatalytic Efficiency, Montri Aiempanakit, Penpicha Sudjai, Kittiyaporn Singsumphan, Sakchai Laksee, Cheewita Suwanchawalit

Journal of Metals, Materials and Minerals

Photocatalytic efficiency of ZnO nanorods has been investigated with respect to the concentration of brazilein. Brazilein modified ZnO nanorods were prepared by an impregnation process with 1.0%w/v, 2.5%w/v, and 5.0%w/v of brazilein solution.  In order to correlate the variation in concentration distributions and photocatalytic performance, the phase composition, optical properties, and photo-catalytic activities of brazilein modified ZnO nanorods prepared with different brazilein concentrations have been investigated and compared to an unmodified ZnO nanorods. The photocatalytic properties were measured in terms of indigo carmine degradation under visible light irradiation. It was found that ZnO nanorods with the highest visible light-responsive photocatalytic …

Extraction Of Molybdenum From A Spent Hds Catalyst Using Alkali Leaching Reagent, Chatisa Kansomket, Piamsak Laokhen, Tanongsak Yingnakorn, Tapany Patcharawit, Sakhob Khumkoa

Journal of Metals, Materials and Minerals

This research investigated extraction of molybdenum from spent hydrodesulfurization (HDS) catalyst used in petroleum refinery. The spent HDS catalyst still however contains significant amounts of valuable metals such as molybdenum and nickel for example, thereby recovery of such metals are of great interest. Pyro-hydrometallurgical process was utilized in this research to selectively extract molybdenum from the spent HDS catalyst using alkali leaching reagent. The process start from calcination of spent HDS catalyst, alkali leaching using sodium carbonate, purification by carbon adsorption-desorption, precipitation of ammonium molybdate and finally calcination to give molybdenum trioxide (MoO3) as the final recycling product. Effects of …

Recovery Of Nickel From Spent Electroplating Solution By Hydrometallurgical And Electrometallurgical Process, Piamsak Laokhen, Natthicha Ma-Ud, Tanongsak Yingnakorn, Tapany Patcharawit, Sakhob Khumkoa

Journal of Metals, Materials and Minerals

Recovery of nickel from spent electro nickel plating solution has been investigated via hydro-metallurgical and electrometallurgical processes. Experimental consisted of 3 steps, including precipitation of nickel from spent solution, leaching of nickel precipitate, and electrowinning of nickel. Nickel precipitation was performed using sodium hydroxide. Leaching parameters such as 1 M to 3 M sulfuric acid concentration, 100 g×L-1 to 300 g×L-1 solid to liquid ratio, and 30 min to 180 min leaching time were investigated. The leachate from the optimal leaching condition was further used as an electrolyte in electrowinning process. Effects of 3.3 V to 3.7 V cell voltage …

Development Of Aggregate From Bottom Ash In Environmentally Friendly Concrete, Udomvit Chaisakulkiet, Nattapong Makaratat, Sumrerng Rukzon

Journal of Metals, Materials and Minerals

This research presents a study of bottom ash for using as fine and coarse aggregates in concrete, B-F and B-C, respectively. Results of compressive strength and durability of the concrete containing B-F and B-C aggregates were investigated. Normal fine and coarse aggregates were replaced with the B-F and B-C aggregates at 0, 25, 50, 75 and 100% by weight of the normal aggregates. The results showed that the compressive strengths of the concretes were increased when the B-F and B-C aggregates were used at replacement levels of 25% and 50%. The water absorption and chloride resistances of the concretes were …

Microscale Transverse Compression Modeling: A Comparative Study Of The Analytical Mac/Gmc Methods To Experimental Results, Emily Zeitunian

Dissertations, Master's Theses and Master's Reports

Composite materials require a multi-scale approach to fully understand its behavior. At the micro level, material behavior analysis is conducted most often using numerical or analytical approaches. These models, however, require validation from experimental data to ensure material predictions are accurate. This study compares a semi-analytical micromechanical analysis tool, MAC/GMC, to experimental results of in-situ microscale transverse compression testing conducted at AFRL facilities. Effective properties, stress-strain curves, stress and strain fields, and damage predictions are compared with experimental outputs. Both generalized method of cells (GMC) and high-fidelity generalized method of cells (HFGMC) theories implemented within MAC/GMC show results that agree …

Cold-Formed Steel Strength Predictions For Torsion, Yu Xia, Robert S. Glauz, Benjamin W. Schafer, Michael Seek, Hannah B. Blum

Engineering Technology Faculty Publications

Locally slender open cross-section members are susceptible to significant twisting and high warping torsion stresses. Torsion considerations are complicated by whether it is derived as a first-order effect from loading or a second-order effect from instability. Previous direct torsion experiments on lipped channels have shown significant inelastic reserve in limited cases. The current design for combined bending and torsion interaction has some limitations, including only considering the first yield in torsion and ignoring the cross-section slenderness in torsion. A parametric study is conducted to predict the torsion capacity in locally slender cross-sections. Shell finite element models of lipped Cee and …

Exploring The Effects Of Chip Flexibility On The Behavior Of Standing Seam Diaphragms To Brace Cold Formed Steel Purlins, Michael W. Seek

Engineering Technology Faculty Publications

Cold-formed steel C- and Z-shaped purlins in standing seam roof systems rely on the diaphragm action provided by the panels to restrain lateral movements and thus increase the load carrying capacity the purlins. The clip connection between the purlin and the panel has inherent and sometimes intentional flexibility designed to accommodate thermal deformations. The lateral deformation behavior of standing seam systems supported by Zees is highly nonlinear and this behavior is not well understood. The flexibility has major implications on the transfer of diaphragm forces throughout these systems and simplified models often grossly overpredict the demands on the diaphragm and …

Lateral-Torsional Instability And Biaxial Bending Of Imperfect Frp I-Beams, Jodi Knorowski, Stella B. Bondi, Zia Razzaq

Civil & Environmental Engineering Faculty Publications

This paper presents the outcome of a theoretical and experimental study of the behavior of Fiber Reinforced Polymer (FRP) I-beams exposed to lateral-torsional instability or when subjected to biaxial bending. Laboratory experiments involved the application of vertical and horizontal static loads to a 4 x 4 x ¼ in. I-beam with various lengths and the resulting deflections were recorded. Governing biaxial flexure and torsion differential equations were modified to account for the presence of initial imperfections and subsequently solved using a central finite-difference scheme. The theoretical predictions of the beam behavior were found to be in good agreement with what …

A Computational Exploration Of The Scandate Cathode Surface, Shankar Miller-Murthy

Theses and Dissertations--Chemical and Materials Engineering

The exact surface configuration of scandate cathodes has been a point of contention for the materials community for a long time. Without proper understanding of it and the related structures and emission mechanisms, scandate cathodes remain patchy and unreliable emitters. Thus, density functional theory techniques were applied to various potential surface arrangements and found that there are several low-energy surfaces with low work functions that incorporate a scandium interlayer between tungsten and oxygen or otherwise have a scandium-on-tungsten structure. Furthermore, it was discovered that adding a monolayer of scandium directly to a tungsten surface is surprisingly favorable, thermodynamically. While none …

Adjust-A-Ramp, Taylor Sharrits, Courtney Banks, Emily Beck, Jazmin Buenrostro

Williams Honors College, Honors Research Projects

Adjust-A-Ramp is a portable ramp designed to ensure the safety of consumers and prevention of damage to cars, specifically towards low profile cars. A low-profile vehicle includes any vehicle that has a clearance off the ground of 6.5 inches or less. Advantages of low-profile vehicles include improved handling, better braking, increased fuel efficiency, increased stability, and an overall luxury aesthetic. The reduced tire size increases grip on smooth surfaces with better wheel response, creating a fast, more efficient ride. The simple tire tread patterns and the stiff sidewalls allow for lower rolling resistance which increases fuel economy. The Adjust-A-Ramp can …

Recycled Printer Filament, Charlotte Hyland, Troy D. Molinar

Williams Honors College, Honors Research Projects

The purpose of this research is to examine the effects of recycling PLA filament for 3D printing on its material properties. After examining these effects, PLA and carbon fiber additives were mixed with recycled PLA pellets in different ratios to attempt to regain material properties lost in the recycling process. To complete these findings, an experiment was design and executed.

The research found that tensile strength during multiple iterations of recycling remained mostly unaffected, however, the strain degraded exponentially. In the PLA additive study, high ratios of PLA additive were able to increase the strength and strain properties of the …

Method For Reducing Warping Stresses In Torsionally Loaded I-Section Members Using Cfrp Plates, Mamadou Konate, Zia Razzaq

Civil & Environmental Engineering Faculty Publications

This paper presents a method for reducing warping normal stresses in torsionally loaded I-section members by utilizing carbon fiber-reinforced polymer (CFRP) plates. The CFRP plates are bonded to the outer surfaces of the flanges with a view to reducing warping normal stresses. The maximum warping normal stress in the flanges of a steel I-shaped member without the CFRP plates is compared to those obtained with the CFRP plates having various thicknesses. It has been found that the use of CFRP plates bonded to both flanges of the I-section result in a substantial reduction of the warping stresses. For the study …

Implementation Of Multiscale Mechanisms In Finite Element Analysis Of Active Composite Structures, Amany G. Micheal Prof., Yehia Bahei-El-Din

Mechanical Engineering

Interrogation of composite structures for inherent damage is investigated implementing three-tier analysis scheme. The analysis starts at the structure level where a general-purpose Finite Element code ABAQUS is employed to obtain the stress field in the second level of analysis that is the composite laminate. A special material routine is prepared to propagate the local fields to the individual plies and hence to the third level of analysis which is the microstructure modelling of the composite. Through the third level of analysis, interface damage between fiber and matrix is checked implementing a certain failure criteria. The interaction between the different …

Protocols Of Improvements For Pmma Denture Base Resin: An Overview, Nidal W. Elshereksi, Fathie A. Kundie, Andanastuti Muchtar, Che H. Azhari

Journal of Metals, Materials and Minerals

Polymethyl methacrylate (PMMA) is a polymer that is expansively employed in denture base construction due to its low cost, aesthetics, lightweight, reparability, and processability. Nevertheless, this material is not ideal to fulfill the mechanical and physical characteristics of dental restorations. Despite the popularity of the thermal polymerization method, the main shortcoming is the prolonged curing period. Thus, correctly selecting a polymerization cycle and post-polymerization treatment is needed to achieve promising outcomes. In autoclave polymerization, pressure plays a crucial function in accelerating the initial polymerization as well as decreasing the pores and remaining monomer level, thereby improving the flexural strength. Besides, …

Bio-Composite Of Nipa Palm Husk Derived Activated Carbon/Poly(Butylene Succinate): An Effective Agricultural Waste Based Adsorbent For Ammonia Removal, Chaichana Piyamawadee, Viboon Sricharoenchaikul, Duangdao Aht-Ong

Journal of Metals, Materials and Minerals

In this work, activated materials were successfully prepared by pyrolyzing various ratios of Nipa palm husk powder to potassium hydroxide  (1:1, 1:2, and 1:3) at predetermined temperatures (500℃, 600℃, and 700℃). The surface area was obtained from nitrogen isotherms using the Brunauer-Emmett-Teller (BET) equation. The surface area of the prepared activated carbon was increased with decreasing potassium hydroxide impregnation ratio and increasing pyrolyzing temperature. The highest surface area was 1,211 m2×g-1. In contrast, acidic surface functional groups investigated by Boehm’s titration were increased with decreasing pyrolyzing temperature and impregnation ratio. Ammonia removal capacity was increased with an increase in the …

Sintering Behavior Of Nanostructured Β-Cpp Powder Obtained From Avian Eggshell Waste, Bruno Silvano Silva, Tarcília Henrique Amaral Correa, Rômulo Leite Loiola, José Nilson França Holanda

Journal of Metals, Materials and Minerals

In this work the sintering behavior of a nanostructured b-calcium pyrophosphate (b-CPP) powder derived of avian eggshell waste was investigated. The b-CPP pellets were prepared by uniaxial pressing and sintered in air for 2h at temperatures ranging from 600℃ to 1200℃. The sintering behavior was evaluated in terms of linear shrinkage, water absorption, apparent porosity, apparent density, tensile strength, FTIR (Fourier-transform infrared) analysis, and microstructural analysis via SEM (scanning electron microscopy). The results showed that the nanostructured b-CPP powder presented different behaviors with increasing sintering temperature. It was found that sintering at higher temperatures led to greater densification of the …

Utilization Of Silicon Dioxide Powder From Industrial Wastes As Novel Filler In Rubber Isolator Application, Amorn Ajinsamajan, Adisai Rungvichaniwat, Anuwat Saetung

Journal of Metals, Materials and Minerals

The silicon dioxide powder (SP) was an industrial waste and obtained from the silicon metal industry in Thailand. The effect of SP loading on cure characteristics, mechanical, dynamic and endurance properties in natural rubber were investigated and compared to calcium carbonate (CaCO3) and unfilled natural rubber, respectively. Results revealed that the addition of SP significantly affected the cure characteristics and mechanical properties. An increasing content of SP increased the hardness, modulus, tensile strength and tear strength due to a higher SP-rubber interaction but decreased the elongation at break since higher SP in rubber matrix resulting in lesser mobility of rubber …

Synthesis And Phosphate Adsorption Performance Of Elephant Dung Biochar Modified With Magnesium And Iron, Navod Abeysinghe, Kaewta Jetsrisuparb, K.H.T. Karunarathna, E.P.S. Chandana, Siraprapa Suwanree, Pornnapa Kasemsiri, Prinya Chindaprasirt, Jesper T.N. Knijnenburg

Journal of Metals, Materials and Minerals

The large production volume combined with the high lignocellulose content makes elephant dung an attractive and underutilized biomass resource, but also presents waste management problems for elephant orphanages. This study explored the conversion of elephant dung into biochars by slow pyrolysis at 500°C for the recovery of phosphate. The unmodified biochar (BC500) had a specific surface area (SBET) of 62.5 m2×g-1 with point of zero charge (pHPZC) of 7.7. Biochar modification with MgCl2 (MgBC500) and FeCl3 (FeBC500) by pre-pyrolysis treatment affected the SBET (48.7 m2×g-1 and 259.4 m2×g-1, respectively) and pHPZC (8.7 and 3.3, respectively). In FeBC500, Fe was present …

The Structure And Ferromagnetism Of Carbon Nanofibers From Polyacrylonitrile/ Polyvinylpyrrolidone, Suminya Teeta, Ratchaneekorn Wanchanthuek, Somchai Sonsupap, Santi Maensiri, Narong Chanlek, Kwanruthai Wongsaprom

Journal of Metals, Materials and Minerals

Room-temperature ferromagnetism was successfully induced in carbon. Carbon nanofibers were fabricated using sequential electrospinning of polyacrylonitrile (PAN) and polyvinylpyrrolidone (PVP). The morphologies, crystal structures, chemical bonding states and magnetic properties were characterized over three different weight ratios which were 10:0, 7:3 and 6:4 of PAN/PVP. The carbon nanofibers obtained after pyrolysis of polymer fibers were placed inside a tube furnace using a three steps process: stabilization, carbonization, and activation at 800℃. XRD patterns indicated the amorphous structure of carbon. The average diameter of the carbon nanofibers was between 340 nm to 511 nm. Raman analysis was used to determine the …

Effects Of Sputtering Power Of Ti Films On Morphology Of Tio2 Nanotubes Synthesized Via Anodization Process, Pathomporn Junbang, Chantana Aiempanakit, Chantana Aiempanakit

Journal of Metals, Materials and Minerals

In this paper, we aimed to find the sputtering power most suitable for fabricating anodized TiO2 nanotubes (TNTs) with high dimensions (diameter and length). TNTs were synthesized via anodization of Ti films deposited on a glass substrate at varying sputtering power from 50 W to 200 W. The properties of Ti films such as crystallinity, residual stress, and roughness were investigated, which affected the morphology of TNTs. Sputtering power levels of 150 W and 200 W were suitable for TNTs formation via the anodization process in NH4F concentrations from 1.0 wt% to 2.5 wt% due to the increased density and …

Utilization Of Freeze Thaw Process For Polyvinyl Alcohol/Sodium Alginate (Pva/Sa) Hydrogel Composite, Rapeepan Muangsri, Piyachat Chuysinuan, Thanyaluck Thanyacharoen, Supanna Techasakul, Pongpat Sukhavattanakul, Sarute Ummartyotin

Journal of Metals, Materials and Minerals

Polyvinyl alcohol/sodium alginate (PVA/SA) hydrogel was successfully prepared by freeze thaw process. Without crosslinking agent, hydrogel was formed by using 3, 5 and 7 consecutive cycles of freeze thaw. Hydrogel can be formed by hydrogen bonding formation between OH-group of sodium alginate and polyvinyl alcohol throughout network. Scanning electron microscope reported that microstructure of hydrogel was well packed. The interconnect porosity was also observed. Differential scanning calorimetry exhibited that two exothermic peaks at temperature of 110℃ and 225℃ were observed due to evaporation of water molecule and melting temperature of hydrogel, respectively. The swelling behavior was rapidly increased within initial …