Engineering Science and Materials Commons^™

Fem Modeling And Comparative Study Of Graphite Lubricants In The Hot Forging Of Aisi 1045 Medium Carbon Steel, Raschanan Poungprasert, Nattarawee Siripath, Naiyanut Jantepa, Surasak Suranuntchai

Journal of Metals, Materials and Minerals

This study investigates the performance of water-based and oil-based graphite lubricants in the hot forging of AISI 1045 medium carbon steel, aiming to enhance product quality while minimizing die wear. Utilizing Finite Element Method (FEM) simulations and experimental analysis, we examined key factors including flow lines, dimensional accuracy, forging load, and die wear. Results indicate that oil-based graphite lubricants significantly outperform water-based options, achieving a lower average error of 0.26% in dimensional accuracy compared to 0.99% for water-based lubricants. Additionally, oil-based lubricants resulted in reduced forming loads, leading to improved energy efficiency and longer die life. Microstructural analysis revealed that …

Effect Of Compaction Pressure On The Structure And Mechanical Properties Of Functionally Graded Aluminium-Glass Microsphere (Fgagm) Foams Produced By Powder Metallurgy Process, Vicheka Moeun, Seksak Asavavisithchai

Journal of Metals, Materials and Minerals

Functionally graded aluminium-glass microsphere (FGAGM) foams were successfully fabricated via powder metallurgy. The influence of compaction pressure on the structural and mechanical properties of the foams was systematically investigated. The study observed that increasing compaction pressure enhanced the green (pre-sintering) density of FGAGM foam, while post-sintering densities exhibited a decreasing trend with higher compaction pressures. The mechanical examination indicated that mechanical properties improved significantly with higher compaction pressures. While higher compaction pressures generally improve mechanical properties, the study identified that excessive pressures could lead to the fracture of GM particles, introducing defects that compromise the foam's structural integrity. Therefore, determining …

Structural Tuning Of Bioi Toward Bi O /Agi Heterostructures Via Room-Temperature Ion Exchange For Improved Photocatalytic Activity, Varunya Atimayulerd, Sorawit Thueanbangyang, Kittiyaporn Singsumphan, Ganyaporn Wongwaen, Cheewita Suwanchawalit, Montri Aiempanakit

Journal of Metals, Materials and Minerals

In this work, a bismuth oxide/silver iodide (Bi2O3/AgI) heterojunction photocatalyst was successfully fabricated via a room-temperature ion exchange process using bismuth oxyiodide (BiOI) as a morphology-directing precursor. Building upon our previous work on solvent-modulated BiOI nanostructures, this study employs a chemical transformation route to develop interfacially connected heterostructures while preserving key morphological features. Structural, morphological, and optical characterizations, including X-ray diffraction, field-emission scanning electron microscopy, energy-dispersive X-ray spectroscopy, Fourier-transform infrared spectroscopy, and ultraviolet–visible diffuse reflectance spectroscopy, provided supporting evidence for the successful formation of Bi2O3/AgI heterojunctions with likely close interfacial contact. The optimized Bi2O3/AgI composite with a 50:50 mass ratio …

Optically Stimulated Luminescence Dating Of Earthenware From The Nam Tok Khao Pang Archaeological Site, Kanchanaburi, Thailand, Thananan Phetkongtong, Peerasak Klubket, Santi Pailoplee, Pichet Limsuwan, Voranuch Thongpool

Journal of Metals, Materials and Minerals

The Nam Tok Khao Pang archaeological site, located in Tha Sao subdistrict, Sai Yok district, Kanchanaburi province, Thailand, is a limestone cave where numerous artifacts, including black-burnished earthenware fragments with in-curving rims, out-curving rims, and carinated bodies, have been discovered. Mineralogical and microstructural analyses using X-ray diffraction (XRD), energy-dispersive X-ray spectroscopy (EDS), and scanning electron microscopy (SEM) identified quartz (SiO₂) as the dominant mineral phase within a partially sintered silicate matrix. The absence of vitrification and the presence of mineral impurities indicate that the earthenware was fired at temperatures between 900°C and 1000°C. To determine the age of these ceramics, …

Facile Bio-Synthesis Of Cerium Oxide Nanoparticles, Characterization And Their Photocatalytic Potential In The Degradation Of Real Tannery Wastewater, Ganeshkumar Govindasamy, A. Babu Ponnusami

Journal of Metals, Materials and Minerals

The sustainable metal oxide photocatalysts using plant extract presents a viable alternative to conventional chemical synthesis techniques. In this study, spherical shaped cerium oxide nanoparticles were synthesized using ammonium ceric nitrate and Peepal Leaves (PL) extracted and used as a photocatalyst to remove hexavalent chromium and chemical oxygen demand from actual tannery wastewater. The characterization of cerium oxide nanoparticles was carried out using UV-Visible spectroscopy, X-ray diffraction, Fourier-transform infrared spectroscopy, Brunauer-Emmett-Teller surface area analysis, Field Emission-Scanning Electron Microscopy with energy-dispersive X-ray spectroscopy, Raman analysis, High Resolution-Transmission Electron Microscopy and Zeta potential analysis. The band gap energy of 3.25 eV was …

Reuse Of Calcium Carbonate (Caco3) Recovered From Discarded Carpets As Filler In Fiber-Reinforced Polymer (Frp) Composites, Roshan Devkota

Graduate Theses, Dissertations, and Problem Reports (ETD)

Over four billion pounds of carpet are discarded annually in the United States, making carpet waste a significant environmental concern. Calcium carbonate (CaCo₃) constitutes up to 45% of the mass of most synthetic carpets. Reusing this CaCo₃ as a filler in the rapidly growing fiber-reinforced polymer (FRP) industry, which is projected to reach USD 10.38 billion, presents a low-cost, practical approach to developing a market-based solution to post-consumer carpet waste.

This study investigates the reuse of CaCo₃ recovered from discarded carpet backing as a filler in FRP composites, focusing on its mechanical viability in comparison to virgin CaCo₃. The methodology …

Microwave-Assisted Reduction Of Critical Metal Oxides From E-Waste Mixture, Kurundu Shavinka Jayasekera

Graduate Theses, Dissertations, and Problem Reports (ETD)

The efficient recovery of critical metals such as tantalum (Ta), manganese (Mn), gallium (Ga), and indium (In) from electronic waste (e-waste) is essential for resource sustainability and environmental protection. This research uses microwave-assisted treatment to investigate the carbothermal reduction of these four specific metals from their oxides in a simulated e-waste mixture, with carbon black serving as both a microwave coupling and reduction agent. Microwave processing is used specifically because it offers a rapid and energy-efficient alternative to conventional thermal methods, with the benefits of intrinsic heating and selective heating of materials. The first experiments centered on understanding the effects …

All-Solid-State Sodium-Ion Batteries: A Leading Contender In The Next-Generation Battery Race, Rui-Jie Zhu, Ze-Chen Li, Wei Zhang, Akira Nasu, Hiroaki Kobayashi, Masaki Matsui

Journal of Electrochemistry

All-solid-state lithium-ion batteries (LIBs) using ceramic electrolytes are considered the ideal form of rechargeable batteries due to their high energy density and safety. However, in the pursuit of all-solid-state LIBs, the issue of lithium resource availability is selectively overlooked. Considering that the amount of lithium required for all-solid-state LIBs is not sustainable with current lithium resources, another system that also offers the dual advantages of high energy density and safety— all-solid-state sodium-ion batteries (SIBs) —holds significant sustainable advantages and is likely to be the strong contender in the competition for developing next-generation high-energy-density batteries. This article briefly introduces the research …

Contributions To Journal Of Electrochemistry, The Flagship Journal Of Chinese Chemical Society Electrochemical Committee, Will Be Listed As A New Recommendation Policy For China Youth Awards Of Electrochemist, Editorial Office Of J.Electrochem.

Journal of Electrochemistry

No abstract provided.

Dendrite-Free Strategies For Aqueous Zinc-Ion Batteries: Structure, Electrolyte, And Separator, Gang Wu, Wu-Hai Yang, Yang Yang, Hui-Jun Yang

Journal of Electrochemistry

Continued growth in energy demand and increased environmental pollution constitute major challenges that need to be addressed urgently. The development and utilization of renewable, sustainable, and clean energy sources, such as wind and solar, are crucial. However, the instability of these intermittent energy sources makes the need for energy storage systems increasingly urgent. Aqueous zinc-ion batteries (AZIBs) have received widespread attention due to their unique advantages, such as high energy density, cost-effectiveness, environmental friendliness, and safety. However, AZIBs face significant challenges, mainly the formation of zinc dendrites that seriously affect the stability and lifetime of the batteries, leading to battery …

Electrochemical-Method-Induced Strong Metal-Support Interaction In Pt-Cnt@Sno2 For Co-Tolerant Hydrogen Oxidation Reaction, Shen-Zhou Li, Zi-Jie Lin, Qi-An Chen, Zhao Cai, Qing Li

Journal of Electrochemistry

Inducing the classic strong metal-support interaction (SMSI) is an effective approach to enhance the performance of supported metal catalysts by encapsulating the metal nanoparticles (NPs) with supports. Conventional thermal reduction method for inducing SMSI processes is often accompanied by undesirable structural evolution of metal NPs. In this study, a mild electrochemical method has been developed as a new approach to induce SMSI, using the cable structured core@shell CNT@SnO₂ loaded Pt NPs as a proof of concept. The induced SnO_x encapsulation layer on the surface of Pt NPs can protect Pt NPs from the poisoned of CO impurity in …

Striking A Balance: Market Shock & Responses In Automotive Components Manufacturing, Emma Lane Mcgahey

All Theses

This thesis examines the effects of extreme market shocks on supply chain dynamics within the automotive industry. Through an analysis of demand data from an automotive manufacturer to its component suppliers (January 2018 to May 2024), the study investigates the relationship between market shocks and supply chain responses, providing insights into how auto components inventory management handles downstream responses to market shocks. With supporting public data—from FRED, BLS, and the U.S. Census Bureau resources—we explore two primary relationships: the impact of market shocks on the Average Standard Deviation of Demand (SDO) and the effect of demand variability on expedited pricing …

Thermal Conductivity Characterization Of High Oleic Vegetable Oils Based Hybrid Nanofluids Formulated Using Gnp, Tio2, Mos2, Al2o3 Nanoparticles For Mql Machining, Anthony Chukwujekwu Okafor, Tobechukwu Kingsley Abor, Saidanvar Esanjonovich Valiev, Ignatius Echezona Ekengwu, Abiodun Saka, Monday Uchenna Okoronkwo

Mechanical and Aerospace Engineering Faculty Research & Creative Works

This paper presents the results of thermal conductivity characterization of six high oleic soybean oil (HOSO) and four high oleic canola oil (HOCO)-based hybrid nanofluids formulated with four types of nanoparticles (Graphene nanoplatelet (xGnP), TiO2, MoS2, and Al2O3) at nanoparticles wt.% concentration from 1 % to 7 % in 1 % increment using the two-step method for use in MQL machining of difficult-to-cut metals. Thermal conductivity of the formulated hybrid nanofluids were measured using Thermtest Transient Hot Wire Liquid Thermal Conductivity Meter at temperatures from 25 °C to 75 °C in increment of 10 °C. Obtained results showed that thermal …

Removal Capabilities Of Zeolite And Zero Valent Iron With High-Level Waste Tank Radionuclides And Metals: Cesium, Strontium And Chromium, Colette R. Towles

UNLV Theses, Dissertations, Professional Papers, and Capstones

High level nuclear waste (HLW) has been disposed for temporary storage in underground steel tanks at the Department of Energy Nuclear sites. For example, at the Hanford Site, WA, and Savannah River Site (SRS), SC, HLW account for eighty-eight million gallons (Mgal) and 450 million Curies (MCi) of radioactivity. In the early nuclear activity at Hanford, the waste was discharged to single-shell steel tanks, and the lack of secondary containment allowed leaks, contaminating soil and groundwater. Despite tremendous efforts to stabilize the liquid waste at nuclear sites, treatment is complex, costly, and time-consuming; therefore, HLW may have to be stored …

Density-Driven Investigations Of Ruthenium Binary Compounds Rux2 (X = O, S, N), Melanie White

UNLV Theses, Dissertations, Professional Papers, and Capstones

Exploration and fine-tuning of the energy landscape of materials can be accessed by means of changes in material density, a key principle of high pressure research. Density-driven changes impact variations in oxidation states and coordination numbers for the element constituents of a compound. Pressure-induced modification of intrinsic density can promote the formation of new materials, variations in physical properties, and transformations in crystallographic symmetry. With this as our foundation, we focus on ruthenium binary compounds - altering the anion species to change electronegativity while probing pressure and temperature effects. This led us to the present study of ruthenium oxide RuO2, …

Development Of Uranium Fluoride Microstructures, Harry Jang

UNLV Theses, Dissertations, Professional Papers, and Capstones

Uranium microstructured materials with controlled size and shape have found applications in several branches of the nuclear industry including as targets for medical isotopes production, fuels for nuclear reactors, standards for analytical measurements, and energy sources for space exploration. Morphological studies of actinide materials are also highly relevant to nuclear forensics-related work. Other potential applications include information storage, catalysis, sensors, and luminescent devices. Most studies on uranium microstructured materials have focused on binary oxides, nitrides, carbides, and fluorides, with the spherical shape being the dominant morphology. Prior to the work reported in this dissertation, aside from UF4 microspheres (ms) and …

Synthesis And In Vitro Testing Of Mg-6zn-Xhap Biocomposites From Beef Bone As Biodegradable Bone Implant Material, Jojor Lamsihar Manalu, Francisca Tjhay, Theodora Kristoforus, Sovian Aritonang

Journal of Mechanical Engineering Science and Technology (JMEST)

This study aimed to develop biodegradable Mg-6Zn hydroxyapatite (Mg-6Zn HAp) biocomposites for potential use in bone replacement applications. The hydroxyapatite (HAp) powders, sourced from cow bone, were synthesized through an eco-friendly and cost-effective process, leveraging bioresources for material sustainability. The Mg-6Zn and HAp powders were mechanically mixed through ball milling for six hours to ensure homogeneity. The resultant powder mixture was then subjected to isostatic pressing at a high pressure of 570 MPa, forming a dense coin-shaped composite with a 1.5 cm diameter. This coin was consolidated in a capsule furnace at elevated temperatures for one hour to enhance material …

Analysis Of Tidal Energy Potential In The Merauke Papua River Waters Indonesia, Peter Sahupala, Daniel Parenden

Journal of Mechanical Engineering Science and Technology (JMEST)

The purpose of this study is as a source of information to study the potential of tidal energy at the estuary of the Maro River in the waters of Merauke Regency. This study uses a quantitative method, while the method for determining the location of the study used is the purposive sampling method where the data collection point is right at the end of the estuary of the Maro River because it faces directly onto the Arafura Sea. Tide data for 5 months, namely September 1, 2023 to January 31, 2024 with a pool area of 1,260,000 m2, with the …

Study On Thermal-Fluid-Solid Coupling Characteristics For Helicopter Intermediate Spiral Bevel Gear Reducer, Dongping Sheng, Jie Yang, Chun Su

Journal of Mechanical Engineering Science and Technology (JMEST)

In the helicopter transmission system, the intermediate reducer is particularly special. It uses bevel gear pairs to change the transmission direction and to transfer the rotational speed effectively. Therefore, an in-depth study of the spiral gear pair is crucial to improve the overall performance of the helicopter rotor system. This study focuses on the study of the thermal-fluid-solid coupling characteristics and one-way steady-state thermal finite element analysis are conducted based on volume of fluid multiphase flow simulation theory to provide strong support for the design and optimization of the helicopter intermediate reducer. Several conclusions could be obtained. Firstly, it could …

Characteristics Of Liquid Products From Spirulina Platensis Pyrolysis Under Microwave Irradiation With Activated Carbon Additive, Mohammad Mirza Yuniar Romaz, Sukarni Sukarni, Retno Wulandari

Journal of Mechanical Engineering Science and Technology (JMEST)

Global energy consumption has surged due to the population's rapid growth, leading to a switch to using renewable and clean energy. Among various strategies for developing renewable and clean energy, biomass pyrolysis emerged as attractive, and microwave irradiation pyrolysis is a prominent technique. This research aims to determine the ideal parameters for microwave-assisted pyrolysis of Spirulina platensis (SP) microalgae in order to produce high-value liquid products with the addition of activated carbon (AC) additives. Liquid bio-oil products were characterized concerning their calorific value, chemical bonds, and thermal stability. This research also investigates product distribution as a function of AC loading. …

Optimization Of The Number Of Cylinder Blades In Coffee Pulper Machine: Finite Element Analysis And Simple Additive Weighting Methods, Mochamad Rifki Syahriza, Dwi Djumhariyanto, Nasrul Ilminnafik, Mahros Darsin, Danang Yudistiro, Hari Arbiantara Basuki, Robertoes Koekoeh Koentjoro Wibowo, Ahmad Syuhri, Sumarji Sumarji

Journal of Mechanical Engineering Science and Technology (JMEST)

The increasing interest in coffee in all circles means that coffee production and quality must always increase due to consumer demands. One way to maintain the quality of coffee beans is by breaking them down using a huller machine. This research aims to improve the optimization of coffee machines by modifying the cylinder blades of huller machines with variations of 3, 4, 5, and 7 cylinder blades in terms of static loading design and quality and production capacity of coffee bean breaking. The experiment was carried out using 400 rpm and breaking 10kg of dry coffee cherries every time the …

Simulation-Based Methodology To Investigate The Impact Of Material Type And Compressive Speed Variation On Effective Strain Rate And Springback, Radhi Nurvian Amrullah, Syamsul Hadi, Muhammad Akhlis Rizza

Journal of Mechanical Engineering Science and Technology (JMEST)

To obtain the desired results in the manufacturing process, especially the bending process, the occurrence of springback must be reduced. The effective strain rate must be increased to predict the increase in material. This study uses a simulation method to determine the influence of material type and compressive speed variation on spring back and effective strain rate. This study uses 3 kinds of materials: JIS SPHD, JIS A1100 BE, and JIS SN400A, and speed variations, namely: 90 mm/s, 105 mm/s, and 120 mm/s. This study shows that JIS SN400A material has the smallest springback value compared to JIS A1100 BE …

Turbine Engine Reliability Analysis Using Reliability Availability Maintainability (Ram), Oyong Novareza, Zefry Darmawan, Nasir Widha Setyanto, Effendi Bin Mohamad

Journal of Mechanical Engineering Science and Technology (JMEST)

Electrical energy is a vital necessity characterized by ever-increasing electricity consumption. The most dominating power plant in Indonesia in supplying electricity is the steam power plant, which is 50%. In its implementation, there is damage that occurs where the highest damage is to the general unit with the highest damage to the turbine unit. Therefore, the author uses the reliability, availability, and maintainability method or RAM. The purpose of this study is to determine the value of RAM on the turbine system at PLN and provide recommendations for improvements to system performance. The results showed that the MTTF and MTTR …

Innovative Approaches For Improving Orc Performance: A Review Of Pure Fluids, Zeotropic Mixtures, And Nanoparticles, Ebenezer Kumi, Vasudevarao Veeredhi, Christopher Enweremad

Journal of Mechanical Engineering Science and Technology (JMEST)

Although the organic Rankine Cycle (ORC) is said to effectively capture low-grade heat, its commercialization has been limited because of working fluid constraints and inefficiencies resulting from operating at low temperatures. This study reviews the working fluids used in organic Rankine cycles and examines how nanoparticles could enhance the efficiency of the ORC, by enhancing the thermophysical properties of the working fluids. Results from this review showed that zeotropic mixtures of pure fluids, provide a viable approach to improving the thermophysical characteristics of organic working fluids and have the potential to achieve thermo-economic performance superior to that of individual pure …

Innovations In Additive Manufacturing For Socket Fabrication: An Overview, Linda Ziyadatul Faiza, Wahyu Caesarendra, Wahyu Dwi Lestari

Journal of Mechanical Engineering Science and Technology (JMEST)

Additive Manufacturing (AM) has transformed the prosthetics industry, particularly in socket production, which plays a critical role in the comfort, fit, and functionality of prosthetic limbs. This article examines the latest advancements in AM technologies and their applications in socket fabrication. Key techniques like stereolithography (SLA), selective laser sintering (SLS), and fused deposition modeling (FDM) have facilitated the production of highly personalized, lightweight, and durable prosthetic sockets. These methods not only improve design precision but also allow for the use of biocompatible, flexible materials, enhancing both comfort and functionality. Digital design tools have streamlined the production process, reducing lead times …

Structural Simulation Of Wheelchair Ramp Using Finite Element Method, Bhre Wangsa Lenggana, Agung Nugroho, Ubaidillah Ubaidillah

Journal of Mechanical Engineering Science and Technology (JMEST)

Wheelchairs are essential mobility aids for people with disabilities, but they are often limited to flat surfaces and cannot overcome height differences. Portable ramps are an effective solution to overcome this limitation. This research aims to simulate and analyze the structure of a portable ramp for wheelchairs. Simulations were conducted using finite element method analysis software to assess the portable ramp's von Mises stress, deformation, and safety factor in various loading positions. Finite element method (FEM) analysis software was utilized to evaluate key mechanical properties, including von Mises stress, deformation, and safety factor, under different loading conditions and positions. The …

Analysis Of Biomass Briquette Mixed Bagasse And Sugarcane Peel On The Performance Of Forced Top-Lit Updraft Gasifier Stove, Intan Hardiatama, Aron Enruico, Yuni Hermawan, Muhammad Trifiananto, Skriptyan N.H. Syuhri

Journal of Mechanical Engineering Science and Technology (JMEST)

The population growth in Indonesia from 270 million in 2020 to 279 million in 2024 has increased LPG consumption, potentially leading to future fuel shortages. The top-lit updraft (TLUD) gasifier stove using renewable biomass materials, offers a sustainable alternative. Biomass such as bagasse and sugarcane peel can be optimized into charcoal briquettes with high calorific value and low emissions. The calorific value of briquettes can be further enhanced by blending other high–calorific biomass materials. This experimental research focuses on testing the calorific value of raw bagasse and sugarcane peel before carbonization, as well as briquette mixtures (70:30, 50:50, 30:70) using …

Characterization And Performance Nanofiltration Membranes In Water Quality For Goldfish (Carassius Auratus) Aquaculture, Inpita Casuarina Eqisetia Utari, Uun Yanuhar, Asus Maizar Suryanto Hertika, Heru Suryanto, Jibril Maulana, Nico Rahman Caesar, Mahrus Ismail, Leong-Seng Lim

Journal of Mechanical Engineering Science and Technology (JMEST)

Water quality is an important factor in aquaculture activities, including goldfish (Carassius auratus) farming. One approach to improving water quality is the use of nanofilters. This study aims to evaluate the performance of nanofilters made from Sargassum sp. with the addition of copper oxide nanoparticles. The method used involves the fermentation of bacterial cellulose from Acetobacter xylinum using Sargassum sp. extract as a medium, followed by homogenization and the addition of CuO-NPs at concentrations of 0.5%, 1%, and 1.5%, and subsequent oven drying. The nanofilter membrane will then be analyzed using SEM, XRD, and FTIR to characterize its properties. Performance …

The Potential Of Ramie Fiber As Reinforcement In Calcium Carbonate-Filled Polyester Resin Matrix Composites For Roofing Applications, Reinaldo Reinaldo, Djoko Setyanto

Journal of Mechanical Engineering Science and Technology (JMEST)

Polymer matrix composite roofing materials available in the Indonesian market typically consist of 30%wt chopped strand mat glass fiber embedded in unsaturated polyester resin, filled with 30 parts per hundred resin (PHR) calcium carbonate. The aim of this research is to evaluate whether natural ramie fibers can potentially replace glass fibers. In the first stage of the study, we compared three types of natural fibers abundant in Indonesia: banana stem fibers, sugarcane bagasse, and ramie. Showed that ramie fiber performed the best. Its flexural strength, flexural modulus, and impact toughness were the highest, measured at 191.57 MPa, 6691 MPa, and …

Captivating Combustion Traits Of Bio-Oil Droplets Enriched With Bio-Additives From The Areca Shell Waste, Muhammad Alif Raehan, Helen Riupassa, Hendry Y. Nanlohy

Journal of Mechanical Engineering Science and Technology (JMEST)

Fuel derived from crude vegetable oil, such as coconut oil, holds promise as an alternative energy source to mitigate the increasing reliance on fossil fuels driven by population growth and industrial activities. The experiment involved suspending a single droplet of crude coconut oil mixed with activated carbon from areca shell waste and placed at the junction on R-type thermocouple (Pt/Pt-Rh13%). The droplets were ignited using a hot wire and subjected to atmospheric pressure and room temperature. Coconut oil comprises a saturated triglyceride carbon chain compound of approximately 91%, and areca shell waste possesses a porous structure that fosters favorable interactions …