Engineering Science and Materials Commons^™

Automation And Habitat Development For A Space Based Marine Life Environment, Logan Trimmer, Alexander Hang

Harrisburg University Other Works

This project was a cross-collaboration between the Environmental Sciences and Advanced Manufacturing and Robotics programs for the company Monolith Space.

The goal of this project was to design an autonomous system to be able to track qualities of water in an aquaculture system designed to be sent to space.

Two Members Of The Editorial Board Of Journal Electrochemistry, Kai Wu Elected As An Academician Of The Chinese Academy Of Engineering And Yi Cui A Foreign Academician Of The Chinese Academy Of Sciences, Editorial Office Of J.Electrochem.

Journal of Electrochemistry

No abstract provided.

A Novel Electrolyte Pyridine Additive For Enhancing Cycle Life Of Lithium-Ion Batteries, Peng-Cheng Wang, Ding-Chang Li, Jun-Tao Li, Guang-Bo Lu, Shi-Wen Wang

Journal of Electrochemistry

Lithium-ion (Li-ion) battery using a graphite (Gr.) anode and a lithium iron phosphate (LiFePO₄, LFP) cathode (Gr.||LFP) has been widespread in energy storage. To match the warranty period of energy storage systems, the lifespan of this kind of Li-ion battery, not only under room temperature but also under relatively high temperature, is critical. Exploration of functional electrolyte additive provides an efficient approach to address this issue. This study reports the usage of pyridine (Py) as a new electrolyte functional additive for Gr.||LFP. In the first cycle, it was found that Py can be reduced before ethylene carbonate and …

Journal Of Electrochemistry Officially Indexed By Leading Oa Databases Oarl And Coaj, Editorial Office Of J.Electrochem.

Journal of Electrochemistry

No abstract provided.

Feature Column Of Journal Of Electrochemistry Nominated For 2025 Top 10 Famous Columns Of Fujian Provincial Newspapers And Periodicals, Editorial Office Of J.Electrochem.

Journal of Electrochemistry

No abstract provided.

Design And Development Of Biomimetic Hydrogel Interfaces For Enhanced Bioelectrical Signal Acquisition, Daniela Nikoloska

UNLV Theses, Dissertations, Professional Papers, and Capstones

Every second, human skin processes over one million sensory signals while maintaining properties such as electrical conductivity, mechanical adaptability, and regenerative capability that surpass all synthetic materials. Contemporary bioelectronic devices prove inadequate when contacting skin surfaces due to poor adhesion and electrical contact issues that prevent effective sensing. Despite advancements in wearable and bioelectronic technologies, current devices face major drawbacks when interfacing with human skin, particularly in maintaining firm adhesion, conformability, and low-noise electrical signal acquisition.

This research focuses on the development of a biomimetic hydrogel-based interface for bioelectronic sensing. Specifically, a hybrid hydrogel system composed of polydopamine (PDA)- doped …

Regulating Lithium Metal Nucleation And Growth For Dendrite Suppression: From Liquid-Electrolyte To Solid-State Batteries, Ao Du, Juan Zhang, Pan Xu, Ya-Jie Li, Kang-Yu Yi, Zhen-Zhen Shen, Hui-Lin Ge, Guang-Wen Zhang, Chao-Hui Zhang, Yu-Hao Wang, Chen-Zi Zhao, Meng-Yang Xu, Yu-Lin Jie, Rui Wen, Shu-Hong Jiao, Si-Qi Shi, Qiang Zhang, Chun-Peng Yang, Yu-Guo Guo

Journal of Electrochemistry

Lithium metal anodes, with a theoretical capacity of up to 3860 mAh·g⁻¹, are regarded as the cornerstone for developing next-generation high-energy-density batteries. However, several key challenges hinder their practical applications, including dendrite formation, unstable solid electrolyte interphase (SEI), side reactions with electrolytes, and associated safety risks. This review systematically explores the mechanisms of lithium nucleation, growth, and stripping in both liquid and solid-state battery systems, analyzing critical theoretical concepts like heterogeneous nucleation thermodynamics, surface diffusion kinetics, space charge effects, and SEI-induced nucleation, which are crucial for understanding the genesis of dendrite growth. Additionally, the review discusses the electrochemical-mechanical …

Strategies For Obtaining High-Performance Li-Ion Solid-State Electrolytes For Solid-State Batteries, Yi-Cheng Deng, Zi-Chang You, Geng-Zhong Lin, Guo Tang, Jing-Hua Wu, Zhi-Min Zhou, Xiang-Chun Zhuang, Li-Xuan Yang, Zhen-Jie Zhang, Zhao-Yin Wen, Xia-Yin Yao, Chang-Hong Wang, Qian Zhou, Guang-Lei Cui, Ping He, Hui Li, Xin-Ping Ai

Journal of Electrochemistry

With the widespread adoption of lithium-ion batteries (LIBs), safety concerns associated with flammable organic electrolytes have become increasingly critical. Solid-state lithium batteries (SSLBs), with enhanced safety and higher energy density potential, are regarded as a promising next-generation energy storage technology. However, the practical application of solid-state electrolytes (SSEs) remains hindered by several challenges, including low Li⁺ ion conductivity, poor interfacial compatibility with electrodes, unfavorable mechanical properties and difficulties in scalable manufacturing. This review systematically examines recent progress in SSEs, including inorganic types (oxides, sulfides, halides), organic types (polymers, plastic crystals, poly(ionic liquids) (PILs)), and the emerging class of soft …

High-Voltage Solid-State Lithium Batteries: A Review Of Electrolyte Design, Interface Engineering, And Future Perspectives, Cheng Yang, Zi-Xin Liang, Ming-Yun Zhang, Ming-Zhe Chen, Kai Zhang, Li-Min Zhou

Journal of Electrochemistry

Solid-state lithium batteries have become a research hotspot in the field of large-scale energy storage due to their excellent safety performance. The development of high-voltage positive electrode materials matched with lithium metal anode have advanced the energy density of solid-state lithium batteries close to or even exceeding that of lithium batteries based on a liquid electrolyte, which is expected to be commercialized in the future. However, in high voltage conditions (> 4.3 V), the decomposition of electrolyte components, structural degradation, and interface side reactions significantly reduce battery performance and hinder its further development. This review summarizes the latest research progress …

Development Trends And Priority Research Fields Of Electrochemical Discipline In The 15th Five Year Plan Period, Lin Zhuang, Wen-Bin Cai, Heng-Xing Ji, Qing Li, Gong-Wei Wang, Sen Xin, Qing Zhao, Fang-Yi Cheng, Yu-Guo Guo, Lan-Qun Mao, Yang Tian, Fei Wu, Li-Min Zhang, Yan Xiang, Jin-Song Hu, Rui Cao, Li Xiao, Hua-Bing Tao, Wei Xing, Dong-Ping Zhan, Hong-Gang Liao, Mei-Ling Xiao, Bin Ren, Zhang-Quan Peng, Rui Wen, Xiang Wang, Yue-Feng Song, Hou-Fu Lv, Bao-Yu Xia, Guo-Xiong Wang, Jun Cheng, Zhi-Pan Liu, Min Zhou, Bing Huang, Cun-Pu Li, Yu-Qin Zou, Shuang-Yin Wang, Hai-Bo Lin, Zi-Dong Wei

Journal of Electrochemistry

In fulfillment of the national science-and-technology development agenda, the Department of Chemical Sciences of the National Natural Science Foundation of China (NSFC) convened the Strategic Symposium on the Fifteenth Five-Year (2026–2030) Development Plan for Electrochemistry held in Xiamen on 29 August, 2025—the culminating year of the Fourteenth Five-Year (2021–2025) Development Plan. More than forty leading experts in the field of electrochemistry participated with spanning nine thematic fronts: Interfacial Electrocatalysis, Interfacial Electrochemistry for Energy Storage, Bioelectrochemistry, Electrochemistry of Hydrogen Energy, Electrochemical Micro-/Nano-Manufacturing, Operando Electrochemical Characterization, Electro-Thermal Coupling Catalysis, Theoretical and Computational Electrochemistry, and Electrochemical Synthesis. The forum assembled China’s foremost electrochemical …

Techno-Economic Analysis Of Hybrid Pv-Wind-Diesel Generator Swarm Grid For Rural Electrification In Tanzania, Ibrahim Mwammenywa

Tanzania Journal of Engineering and Technology (TJET)

Remote, rural, and off-grid communities, particularly in Sub-Saharan Africa (SSA), face significant challenges in securing reliable and affordable electricity. While solutions such as solar home systems (SHSs) and diesel generators (DGs) have been adopted by some individuals, their deployment is often not optimized to meet the full load demand. This study addresses this challenge by proposing a hybrid swarm grid (HSG) design that integrates photovoltaic (PV), wind energy, and diesel generators (DGs). Utilizing MATLAB/Simulink and HOMER, the HSG is modeled and optimized for a typical SSA village, incorporating real-world variables such as load demand profiles, solar irradiance, and wind patterns. …

Investigating The Harmonic Content Of A Pwm Inverter With Varying Modulation Index, Peter Makolo

Tanzania Journal of Engineering and Technology (TJET)

Photovoltaic energy is a clean and endless vital renewable energy. In order to generate electricity from solar energy an inverter is required to transform the direct current into alternating current. Also, with the emerging of new ultra-high voltage direct current transmission technology, the rectification and inverters play a great role. Most three-phase two-level inverters draw harmonics that cause heat dissipation, waveform distortions hence affect the electrical loads. Knowing that Total Harmonic Distortion content of voltage source inverter is important and must be within the allowable range. Several schemes are suggested to mitigate the distortion in order to produce as much …

Series Reports From Professor Wei’S Group Of Chongqing University: Advancements In Electrochemical Energy Conversions (2/4): Report 2: High-Performance Water Splitting Electrocatalysts, Ling Zhang, Wang-Yang Wu, Qiu-Yue Hu, Shi-Dan Yang, Li Li, Rui-Jin Liao, Zi-Dong Wei

Journal of Electrochemistry

The unavailability of high-performance and cost-effective electrocatalysts has impeded the large-scale deployment of alkaline water electrolyzers. Professor Zidong Wei’s group has focused on resolving critical challenges in industrial alkaline electrolysis, particularly elucidating hydrogen and oxygen evolution reaction (HER/OER) mechanisms while addressing the persistent activity-stability trade-off. This review summarizes their decade-long progress in developing advanced electrodes, analyzing the origins of sluggish alkaline HER kinetics and OER stability limitations. Professor Wei proposes a unifying “12345 Principle” as an optimization framework. For HER electrocatalysts, they have identified that metal/metal oxide interfaces create synergistic “chimney effect” and “local electric field enhancement effect”, enhancing selective …

Local Electric Fields Coupled With Cl− Fixation Strategy For Improving Seawater Oxygen Reduction Reaction Performance, Yu-Rong Liu, Miao Zhang, Yan-Hui Yu, Ya-Lin Liu, Jing Li, Xiao-Dong Shi, Zhen-Ye Kang, Dao-Xiong Wu, Peng Rao, Ying Liang, Xin-Long Tian

Journal of Electrochemistry

Development of robust electrocatalyst for oxygen reduction reaction (ORR) in a seawater electrolyte is the key to realize seawater electrolyte-based zinc-air batteries (SZABs). Herein, constructing a local electric field coupled with chloride ions (Cl⁻) fixation strategy in dual single-atom catalysts (DSACs) was proposed, and the resultant catalyst delivered considerable ORR performance in a seawater electrolyte, with a high half-wave potential (E_1/2) of 0.868 V and a good maximum power density (Pmax) of 182 mW·cm⁻² in the assembled SZABs, much higher than those of the Pt/C catalyst (E_1/2: 0.846 V; Pmax: 150 mW·cm^{−2 …}

Bridging Materials And Energy Storage Mechanisms In Zn-I2 Batteries, Rong-Qi Liu, Wen-Shuo Shang, Jin-Tao Zhang

Journal of Electrochemistry

Zinc-iodine (Zn-I₂) batteries have emerged as a compelling candidate for large-scale energy storage, driven by the growing demand for safe, cost-effective, and sustainable alternatives to conventional systems. Benefiting from the inherent advantages of aqueous electrolytes and zinc metal anodes, including high ionic conductivity, low flammability, natural abundance, and high volumetric capacity, Zn-I₂ batteries offer significant potential for grid-level deployment. This review provides a comprehensive overview of recent progress in three critical domains: positive-electrode engineering, zinc anode stabilization, and in situ characterization methods. On the cathode side, anchoring iodine to conductive matrices effectively mitigates polyiodide shuttling and enhances …

Significantly Enhanced Oxygen Reduction Reaction Activity In Co-N-C Catalysts Through Synergistic Boron Doping, Chang Lan, Jing-Sen Bai, Xin Guan, Shuo Wang, Nan-Shu Zhang, Yu-Qing Cheng, Jin-Jing Tao, Yu-Yi Chu, Mei-Ling Xiao, Chang-Peng Liu, Wei Xing

Journal of Electrochemistry

The weak adsorption energy of oxygen-containing intermediates on Co center leads to a considerable performance disparity between Co-N-C and costly Pt benchmark in catalyzing oxygen reduction reaction (ORR). In this work, we strategically engineer the active site structure of Co-N-C via B substitution, which is accomplished by the pyrolysis of ammonium borate. During this process, the in-situ generated NH₃ gas plays a critical role in creating surface defects and boron atoms substituting nitrogen atoms in the carbon structure. The well-designed CoB₁N₃ active site endows Co with higher charge density and stronger adsorption energy toward oxygen species, …

Detecting Electrical Submersible Pump (Esp) Failures And Estimating Run Life Using Artificial Neural Networks, Mostafa Ahmed Sobhy

Theses and Dissertations

Electric Submersible Pumps (ESPs) are one of the important artificial lift methods for sustaining production in mature and high-water-cut wells; but may suffer frequent failures due to mechanical, electrical, hydraulic, chemical, and operational failures. These failures can yield substantial deferred production and intervention costs. Plenty of ESP installations are fitted with downhole sensors. Yet, it is observed that the current industry practice underutilizes the wealth of available sensor and operational data and lacks standardized, explainable failure-type identification and classification.

In this thesis, a comprehensive Machine Learning (ML) and Deep Learning (DL) framework was introduced for ESPs that simultaneously estimates remaining …

Design And Optimization Of Anode Catalysts For Direct Ethanol Fuel Cells: Advances And Challenges In C-C Bond Activation And Selective Modulation Of The C1 Pathway, Kai-Chi Qin, Meng-Tian Huo, Yu Liang, Si-Yuan Zhu, Zi-Hao Xing, Jin-Fa Chang

Journal of Electrochemistry

Direct ethanol fuel cells (DEFCs) are a promising alternative to conventional energy sources, offering high energy density, environmental sustainability, and operational safety. Compared to methanol fuel cells, DEFCs exhibit lower toxicity and a more mature preparation process. Unlike hydrogen fuel cells, DEFCs provide superior storage and transport feasibility, as well as cost-effectiveness, significantly enhancing their commercial viability. However, the stable C–C bond in ethanol creates a high activation energy barrier, often resulting in incomplete electrooxidation. Current commercial platinum (Pt)- and palladium (Pd)-based catalysts demonstrate low C–C bond cleavage efficiency (

Superhydrophilic Porous Coooh Nano-Architecture With Abundant Oxygen Vacancies For Enhanced Urea Electrooxidation At Ampere-Level Current Densities, Wen-Jing Lv, Xiao-Man Tang, Xue-Tong Wang, Wen-Cai Liu, Jian-Wen Zhu, Guo-Jing Wang, Yuan-Zhi Zhu

Journal of Electrochemistry

The conversion of urea-containing wastewater into clean hydrogen energy has gained increasing attention. However, challenges remain, particularly with sluggish catalytic kinetics and limited long-term stability of urea oxidation reaction (UOR). Herein, we report the loosely porous CoOOH nano-architecture (CoOOH LPNAs) with hydrophilic surface and abundant oxygen vacancies (O_v) on carbon fiber paper (CFP) by electrochemical reconstruction of the CoP nanoneedles precursor. The resulting three-dimensional electrode exhibited an impressively low potential of 1.38 V at 1000 mA·cm⁻² and excellent durability for UOR. Furthermore, when tested in an anion exchange membrane (AEM) electrolyzer, it required only 1.53 V at …

Structure Regulation Engineering For Biomass-Derived Carbon Anodes Enabling High-Rate Dual-Ion Batteries, Rui Zhou, Rui Liu, Yun-Nuo Li, Si-Jie Jiang, Tian-Tian Jing, Yan-Song Xu, Fei-Fei Cao

Journal of Electrochemistry

Dual-ion batteries (DIBs) usually use carbon-based materials as electrodes, showing advantages in high operating voltage, potential low cost, and environmental friendliness. Different from conventional “rocking chair” type secondary batteries, DIBs perform a unique working mechanism, which employ both cation and anion taking part in capacity contribution at an anode and a cathode, respectively, during electrochemical reactions. Graphite has been identified as a suitable cathode material for anion intercalation at high voltages (> 4.8 V) with fast reaction kinetics. However, the development of DIBs is being hindered by dynamic mismatch between a cathode and an anode due to sluggish Li^{+ …}

Functional Biopolymers Applied To Sustainable Technologies In The Environment And Healthcare, Fengjie He

UNLV Theses, Dissertations, Professional Papers, and Capstones

Biodegradable polymeric materials (biopolymers) are naturally derived materials known for their excellent biocompatibility, biodegradability, sustainability, and versatile chemical functionality. They have attracted increasing attention in various applications as alternative to synthetic materials ranging from food packaging to tissue engineering. Meanwhile, with intrinsic advantages, biopolymers have also emerged as promising materials in addressing contemporary challenges in both biomedical and environmental fields. Motivated by the significant potential of biopolymers and the growing need for sustainable materials, my research focuses on the design and engineering of biodegradable polymers with novel modification methods and application directions. In this work, two representative biopolymers are selected: …

Advancing Real-World Implementation Of The Well Optimized Linear Finder (Wolf) High-Speed Atmospheric Turbulence Compensation Method, Timothy Evan Coon

Theses and Dissertations

This dissertation advances the real-world implementation of the Well Optimized Linear Finder (WOLF) method for high-speed Atmospheric Turbulence Compensation (ATC). Atmospheric turbulence introduces phase aberrations into optical wavefronts and degrades image quality in terrestrial imaging systems. Traditional phase diversity methods are computationally intensive and poorly suited to real-time operation. The WOLF method addresses these limitations through a novel, point-wise formulation of the optical transfer function (OTF) as a structured autocorrelation of the generalized pupil function (GPF). This formulation enables the estimation of phase aberrations at individual spatial coordinates with distributed computational complexity.

The research begins by developing a MATLAB-based simulation …

Research Progress On Thermal Management Of Lithium-Ion Batteries, Hong-Da Li, Qiu-Wan Shen, Zhao-Yang Zhang, Xin-Yue Zhao, Yuan Wei, Shi-An Li

Journal of Electrochemistry

Nowadays, new energy technologies are developing rapidly, energy storage systems are widely used, and lithium-ion batteries occupy a dominant position among them. Therefore, it is also very important to ensure their performance, safety and service life through thermal management technology. In this paper, the causes of thermal runaway of lithium batteries are reviewed firstly, and three commonly used thermal management technologies, namely, air cooling, liquid cooling and phase change material cooling, are compared according to relevant literature in recent years. Air cooling technology has been widely studied because of its simple structure and low cost, but its temperature control effect …

Regulating The Amount Of Graphene Oxide For Enhanced Capacitive Energy Storage Of Mof Derived Materials, Yong-Ji Qin, Jing-Quan Yang, Hao Wang, Mei-Ling Lian, Pei-Pei Jia, Jun Luo, Xi-Jun Liu, Jun-Feng Liu

Journal of Electrochemistry

In pursuit of more efficient and stable electrochemical energy storage materials, composite materials consisting of metal oxides and graphene oxide have garnered significant attention due to their unique structures and exceptional properties. Graphene oxide (GO), a two-dimensional material with an extremely high specific surface area and excellent conductivity, offers new possibilities for enhancing the electrochemical performance of metal oxides. In this work, we synthesized metal- organic framework (MOF) and GO composites by regulating the amount of GO, and successfully prepared composites of metal oxides supported by nitrogen-doped carbon frameworks and GO through a simple one-step calcination process. Based on the …

Energy Optimal Coverage Motion Trajectory Generation Using A Fourth-Order Motion Profile, Mathias Halinga

Tanzania Journal of Engineering and Technology (TJET)

Industrial machines are widely used in manufacturing sector to manufacture several products to meet customer demands. Most of these industries runs all the time throughout a day leading to high operating cost. To cut costs and satisfy customer demand for precise products, industrial machines’ motion generation is important in improving machine motion precision while using less energy. This study presents a coverage motion energy optimization which is generated by linear interpolation of each segment described by the fourth-order motion profile. The phase changes in the profile are attained with continuity of machine kinematic limits jerk, acceleration, and velocity, which are …

Calibration Of Measurement Tools In The Experimental Test Rig For Hydropower Performance Evaluation, Ombeni J. Mdee

Tanzania Journal of Engineering and Technology (TJET)

The demonstration of a typical hydropower plant requires the development of a test rig with the installation of tools to measure the performance parameters. The measurement tools require a calibration process to improve the quality of recorded data. This study involved the calibration of traditional and automated measurement tools connected to the hydropower test rig through an Arduino microprocessor. The automated measurement tools included a pressure transducer, flow meter, digital tachometer, and torque transducer, while traditional measurement tools, including a pressure gauge, concrete water tank, contact tachometer, and force lever arm balance, were connected in the same test rig during …

Data-Driven Constrained Control, Ali Kashani

Mechanical Engineering ETDs

Ensuring safety is a fundamental challenge. Traditional methods often rely on precise mathematical models, which are difficult, impractical, or costly to obtain for real-world systems with complex, nonlinear dynamics. This dissertation develops direct data-driven control approaches that enable safe and efficient operation of nonlinear systems without requiring explicit models or performing system identification. This effort leverages machine learning, optimization, and control theory to bridge theoretical rigor and practical applicability. Deterministic guarantees are provided based on the Lipschitz continuity of the system, and probabilistic guarantees through scenario optimization. The computation of safe sets is performed using one-shot approaches with broad neural …

Potential Use Of Pump As Turbine Coupled To Self-Excited Induction Generator For Micro-Hydro Cooking And Cooling Applications, Emanuel J. Nyirenda

Tanzania Journal of Engineering and Technology (TJET)

Clean cooking and efficient cooling in developing countries have recently become areas of great focus. Further, the environmental impact of flooding in high-capacity hydroelectric plants has become a major concern. As a result, there is growing emphasis on developing sustainable and decentralized energy solutions, focusing on the potential of micro-hydro systems, especially in rural and remote areas. Although there are several alternative energy generation methods, their application is not straightforward. One of the latest technologies under research is using pumps as turbines coupled to an induction generator. This paper explores through a rigorous experimental approach the possibility of using a …

Modeling Of Carbonization And Absorption Processes In Soda Ash Production, Nadirbek Rustambekovich Yusupbekov, Djalolitdin Paxritdinovich Mukhitdinov, Fatima Faxritdinovna Iskhakova

Chemical Technology, Control and Management

The article considers the problem of modeling the ammonia-soda process of soda ash production and presents the chemistry of sodium bicarbonate (NaHCO₃) formation. The equation of the kinetics of the reaction, used as a model of the carbonation process, is derived from a system of equations and its computer model is compiled. The system of differential equations reflecting the kinetics of the process was solved in the Mathcad package. The result of the modeling is presented. Based on the experimental data, the dependence of the absorption column performance on temperature and the dependence reflecting the optimal value of the absorption …

Algorithms For Making Control Systems Based On Neural Network Technology To Automate Dynamic Plants, Jasur Sevinov, Abdishukurov Maqsudovich Shavkat

Chemical Technology, Control and Management

This paper examines the stages of multilayer neural network technology for the control and identification of dynamic systems. It is seen many ways to use multilayer neural networks in control systems. Neural controllers are based on several models and algorithms. Examples of such algorithms include the predictive model-based control algorithm, the Narma-L2 control algorithm, and the benchmark model-based control algorithm. These controllers illustrate various general ways to use multilayer neural networks in control systems. Common, standard linear control architectures have been proposed for many neural controllers.