Engineering Science and Materials Commons^™

Improvement Of Informational-Methodological Provision On Foreign Languages For Teachers, G. Eshchanova

Irrigation and Melioration

The article discusses the innovative areas of activity, related to the use of information and communication technologies in the educational process of teachers in foreign languages in the world practice, the development of teachers professional communicative competence in teaching English, the use of information and communication, advanced pedagogical technologies in teaching to ensure the solution of such issues, as the increase in the level of development of foreign language skills, diagnostic technologies among teachers.

Дождеваsome Aspects Of Water Management In The Republic Of Uzbekistan During The Period Of Independence (Reality And Forecast), S. Khodjaev

Irrigation and Melioration

To date, there is no alternative to the introduction of the principles of integrated water resources management (IWRM), this is proved by the research of SIC ICWC on the territory of the South Fergana main canal, where the specific water supply per hectare of irrigated area has been reduced by 32% on an area of 120 thousand hectares, that is up to 7 thousand m³/ha, instead of the limited ones 10 thousand m³/ha. Researches recommend cutting off all types of collector-drainage waters (CDW) from the river trunks of the Aral Sea basin, including the Syr-Darya and Amu-Darya, since CDW are …

The Influence Of Gender Approaches On Education Efficiency, G. Eshchanova

Irrigation and Melioration

The given article covers the influence of gender approaches on education efficiency on the basis of statistical and scientific data, and the need to rely on the basis of the necessary knowledge for the ecologically sustainable development of women's knowledge, competence and entrepreneurship are shown. The educational process based on Gender differences and equality contributes significantly to the development of society.

Economic Assessment Of Factors Affecting The Decision Of Households To Engage In Non-Farm Activities, Sh.A. Muratov

Irrigation and Melioration

In this study, non-farm activities and their importance were studied, and it is analysed the influence of push and pull factors on the decision of family heads to engage in non-farm activities by Probit model regression. Furthermore, it is determined their elastic coefficients. The analysed data are collected by conducting an online survey from 134 respondents. The results are showed that the decision of family heads to engage in non-farm activities was greatly influenced by their gender, education, and number of family members, electricity supply, transport services, and size of their land. Namely, the decision of the head of the …

Identifying The Determinants And Extent Of Crop Diversification At Farm Level: A Case Study Of Uzbekistan, A.Э. Primov, M.H. Saidov, I. B. Rustamova, A.A. Abduvasikov

Irrigation and Melioration

Since independence, the government of Uzbekistan has implemented the number of agricultural policies such as making some crucial structural reforms at the farms, comprising different institutions and enhancing diversification of agricultural production in order to stabilize the agricultural sector of the country. Therefore, crop diversity has an important role in sustainable agriculture. We calculated the diversification index based on the Simpson Diversity Index method while ordinary least square (OLS) regression analysis was employed to assess the association of crop diversification on farm income using cross-sectional data from 381 farmers of Uzbekistan. The study revealed the mean computed Simpson Index values …

Atomistic Thermo-Mechanical Description Of The Deformation Behavior, Scaling Laws, And Constitutive Modeling Of Nanoporous Gold, Mohammed Hassan Yousef Saffarini

LSU Doctoral Dissertations

Metallic foams, or nanoporous (NP) metals as it is widely referred to in literature, with ligament sizes up to a few tens of nm show exceptional mechanical properties such as high strength and stiffness per weight ratio under different loading scenarios due to their high surface area to solid volume ratio. Therefore, they can be utilized in a wide range of applications making them of great interest to researchers. While their elasticity and yield strength have been the subject of several studies, very limited attention was given to the effect of size, strain rate, and temperature on the material plastic …

Preventing Transmission Of Covid 19 In Hvac Duct Systems: Implementations Of Hvac System Design Upgrade, Jacob S. Lopez, Adama Barro

Publications and Research

The recent pandemic outbreak has triggered a global alarm to increase efforts on finding the best methods to mitigate contagious viral pathogens. This project is a continuation of our mission to study engineering guidelines needed to implement upgrades to HVAC Systems in order to deter airborne pathogens such as the covid-19 virus. In our previous projects we researched how covid-19 can possibly flow through the ambient air inside of restaurants, office spaces, and locomotive train cabins. As we continued our research, we were able to find some solutions that will be best used to deactivate and prevent the virus from …

Characterization Of Landslide Processes From Radar Remote Sensing And Hydromechanical Modeling, Yuankun Xu

Earth Sciences Theses and Dissertations

Landsides are a natural geomorphic process yet a dangerous hazard which annually causes thousands of casualties and billions of property loss in a global scale. Understanding landslide motion kinematics from early initiation to final deposition is critical for monitoring, assessing, and forecasting landslide movement in order to mitigate their hazards. Landslides occur under diverse environmental settings and appear in variable types; however, all types of landslides can be mechanically attributed to shearing failure at the basal surface due to stress regime shift contributed by internal and/or external forcing. Typical internal factors include soil/rock weathering, whereas typical external triggering forces encompass …

Modeling Hydraulic Fracturing Initiation And Propagation In Porous Rock Formationsl, Chang Huang

LSU Doctoral Dissertations

Hydraulic fracturing has long been introduced to the oil and gas industry since the early nineteenth century for both reservoir characterization and reservoir stimulation. Despite the progress made in the last two decades, many challenges still have not been tackled regarding not only the propagation problem but also the initiation problem due to its complexity. The dissertation is divided into two stages, i.e., before and after fracture initiation. The first stage of the research aimed at improving the accuracy in solving the poro-mechanical response of wellbore during fluid injection before a tensile fracture occurs, which is crucial to determine the …

New Generation Of Performance-Engineered Asphalt Mixtures Based On Balanced Mix Design Concept, Victor Manuel Garcia

Open Access Theses & Dissertations

Asphalt mixtures must ideally exhibit long-lasting durability and stability to perform wellin the field. However, improving the stability and durability of asphalt mixtures has become a major concern. Given that available design approaches rely mainly on stringent volumetric criteria for asphalt mixtures, design approaches and specifications that incorporate performance tests are needed to follow a performance-engineered mix design (PEMD) process, especially with the introduction of the balanced mix design (BMD) concept

This Dissertation study presents a comprehensive investigation of a feasible designapproach that can be implemented to develop PEMD specifications and produce BMD mixtures. An experimental evaluation of different mix …

Quantifying Surface Morphology Of Manufactured Activated Carbon And The Waste Coffee Grounds Using The Getis-Ord-Gi* Statistic And Ripley’S K Function, Sanghoon Lee, Sukjoon Na, Olivia G. Rogers, Sungmin Youn

All Engineering Faculty Research

Activated carbon can be manufactured from waste coffee grounds via physical and/or chemical activation processes. However, challenges remain to quantify the differences in surface morphology between manufactured activated carbon granules and the waste coffee grounds. This paper presents a novel quantitative method to determine the quality of the physical and chemical activation processes performed in the presence of intensity inhomogeneity and identify surface characteristics of manufactured activated carbon granules and the waste coffee grounds. The spatial density was calculated by the Getis-Ord-Gi* statistic in scanning electron microscopy images. The spatial characteristics were determined by analyzing Ripley’s K function and complete …

Assessing Change In Runoff Water Parameters Through Road Shoulder Vegetated Filter Strips: Experimental Comparison Of Soils And Engineered Infiltration Media, Andrew Corrado, Mohammad Shokri

The Pegasus Review: UCF Undergraduate Research Journal

Placement of Vegetated Filter Strips (VFS) along roadways may facilitate removal of nutrients from stormwater runoff. The objective of this research is to compare water quality performance of a VFS containing engineered media to that of typical Florida sandy soil. Storms of variable intensity were simulated over two 1:1 scale physical models of typical one- and two-lane roadway shoulders, one with engineered media (treatment), and one without (control). Simulated roadway runoff was introduced as sheet flow from the roadway and precipitation was applied with a rainfall simulator. Samples of runoff and infiltrate were tested for Dissolved Oxygen (DO) concentration and …

Dynamics Of Running Processes In The Area Of Underless Water Intake, D.R. Bazarov, M.P. Tashkhanova, A. Gayur, M. Sapaeva

Irrigation and Melioration

The paper analyzes the dynamics of channel processes based on the results of field studies of the Amudarya River at the site of the damless water intake to the Karshi Magistralny Canal (KMK) and developed recommendations for improving the water intake conditions. Based on the results of field studies of the head section of the inlet channel, an assessment of the state of the Amudarya river bed in the water intake zone was made. The results of studies of the hydraulic and alluvial regimes of the Amu Darya River in the area of the damless water intake are generalized The …

Determination Of The Optimal Hydromodule Of Irrigation Network For Drip Irrigation, R.Zh. Karshiev, A. Urazkeldiev, A.H. Radjabov, A.I. Ernazarov

Irrigation and Melioration

Most of the irrigation canals operating in the country were built in the 60s and 80s of the XX century, their hydraulic parameters were designed and adapted to the irrigation regimes of agricultural crops, mainly for surface irrigation, and the average hydromodule values were 0,8-1,0 l / s. , the hydraulic parameters of the channel are designed to carry large volumes of water in a short period of time. Over the next 3-4 years, the introduction of water-saving technologies in the irrigation of agricultural crops by farms and "Clusters" requires the improvement of hydraulic methods of irrigation management, the use …

Assessment Of The Impact Of Climate Change On Hydrological Processes In The Chirchik River Basin, Kh.Sh. Gafforov, Sh.D. Sh.D.Tursunboev

Irrigation and Melioration

The importance of assessing past and future climate differences plays an important role in future planning in relation to climate change. This situation requires urgent and concerted action in several areas: technology, infrastructure, politics, economics, and the environment. The article evaluates the impact of changes in precipitation intensity on the water level in the global circulation model (GCM) RCP 4.5 and 8.5 scenarios in the 2030s, 2050s, and 2070s. This study is a useful reference for improving water resource management and ensuring the sustainability of agricultural products in the future, as well as for improving operational water management and agricultural …

Assessment Of The Impact Of Climate Change On Hydrological Processes In The Chirchik River Basin, В.K. Saliev

Irrigation and Melioration

The article examines the assessment of the state and problems of irrigation water use in the republic in the past and in the near future. A comparative analysis of the state of water resources use for the period of the last 30 years from 1989 to 2019 was carried out.According to the estimates, own water withdrawal for 5 years (2014/15-2018/19) shows that an average of 53.2 m3, including 50.5 billion m3 from rivers At present (2018-2019), an average of 57.06 billion m3 of water is taken for irrigation of 4.289 million hectares of land, against 63.02 billion m3 approved in …

Environmental Damage Caused By Transport Equipment Waste, M. Radkevich, K. Shipilova, M. Abdukodirova, O. Pochugevski

Irrigation and Melioration

The article suggests a new approach to the monetary assessment of the damage caused to the environment by the processed waste of the transport sector. The proposed assessment method is based on the waste collection factor, all types of irretrievable losses and the volume of necessary compensatory release of materials. Based on a survey among vehicle owners, it was found that the solid waste collection rate is about 50 %, while the waste collection rate for operating fluids does not exceed 32 %. In this regard, the bulk of the damage to the environment is caused by liquid waste. Calculations …

Research Of Stress-Deformed State Of Multi-Connected Complex Shell Structures, Т.М. Маvlanov, Sh.O. Khudainazarov, B. Yalgashev, O.S. Nurova

Irrigation and Melioration

Conducting numerical experiments for complex structurally inhomogeneous structures allows us to understand the qualitative picture of the effect of various parameters in a wide range of studies and to give sound recommendations at the design stage for conducting laboratory model and field experiments. In this paper, on the basis of the classical theory of elasticity, the basic equations characterizing the stress-strain state of complex multiply connected shell structures are given and a specific problem is solved. At the same time, some of the structural elements have viscoelastic properties. When solving the problem, the behavior of the structure for the n-th …

To The Determination Of The Critical Circuit Speed Of The Sharing Drum, Kh. Kh. Igamberdiev, A.B. Mukhitdinov

Irrigation and Melioration

The article is devoted to the theoretical definition of the critical circumferential speed of the stripping drum of a kena harvester, which depends on the drum diameter, diameter and weight of the stems. It was determined from the equality of the change in the momentum of the stem during impact, i.e. from a shock impulse acting on the stem. The shock impulse is determined when the drum blade touches the stem in the process of stripping, which acts on the mass of the entire stem. The duration of the impact of the drum stripping on the stem was determined from …

An Innovative Seeder For Sowing Non-Loose Seeds Of Saxaul And Cherkez, E.T. Farmonov

Irrigation and Melioration

The main reasons for the absence of a seeder for mechanized sowing of non-loose seeds of fodder plants in deserts are analyzed in the article. The author has developed a technology for sowing non-loose seeds (saxaul and cherkez), which prevents clogging, crushing and breakage in the seeder hopper, and provides for uniform and stable sowing at a set rate and shallow depth over the entire field area without reducing the biological germination. An innovative seeder with a universal sowing unit is recommended. Field tests of the innovative seeder with the proposed universal sowing unit were conducted in February 2020, as …

Recommendations For The Analysis And Safety Assessment Of Turbid Sediments In Flood Reservoirs, А. Yangiev, Sh. Panjiev, D. Adjimuradov

Irrigation and Melioration

The article presents the results of field research conducted in Langar, Dehkanabad, Shurabsoy flood reservoirs in the Kashkadarya region.There are many problems as a result of floods in the reservoirs, there are disturbances in the discharge and drainage facilities during the passage of accidental floods.At the same time, there was a large accumulation of turbid-sediments in flood reservoirs.In the article, the results of the calculations using empirical formulas for predicting the amount of turbid sediments in Langar, Dehkanabad, Shurabsoy flood reservoirs up to 2025-2030 years are also presented, and it is noted that at present their useless volumes are full …

Justification Of Parameters Of Replaceable Working Parts Of A Combined Machine, А.A. Akhmetov, L.B. Muratov

Irrigation and Melioration

In article are described the design and options for completing the replaceable working parts of the combined machine for continuous tillage which of the formation of ridges and ridges for sowing re-crops. The parameters of the ridge former and apron-leveler of this machine have been substantiated. The rational values of the parameters of the comb-former are: length 600 mm, width of the entrance edge 680 mm, height of the blade 160 mm, length of the side edge of the blade 178 mm. The rational values of the working length and height of the leveling apron are 220 mm and 200 …

Development Of An Algorithm For Optimization Of Continuous Technological Process Of Cultivation Of Microorganisms, Sh.R. Rakhmanov

Irrigation and Melioration

In article the analysis of possible modes of microalgae cultivation has been carried out. Two optimization algorithms are substantiated. The first one is based on the method of random search with an absolute bias, an algorithm for optimizing the process of cultivating microorganisms with continuous regeneration of the flow in one cultivator. The second is an algorithm for determining the optimal residence time of chlorella particles in multistage cultivators, focused on the method of dynamic programming, implemented in Wellman's recurrence relation. The developed algorithm for operational forecasting and automatic control of the chlorella cultivation process allows, under given production conditions …

Covid-19 Impact To Family Food Consumption And Income In Uzbekistan: Results Of An Online Survey, Kh. Pardaev, Sh. Hasanov, S. Mamasoliev, Sh. Muratov, R. Kalandarov, U. Nurullaev

Irrigation and Melioration

This article aims to study the impact of the pandemic on food consumption by families in Uzbekistan. The shock of the pandemic is threatening the well-being of families in Uzbekistan, as in all developing countries. The study focuses on the effects of changes in food prices, declining consumption, and changes in household incomes. The Instrumental regression model was used in the factor impact analysis. Data for analysis were collected online by messenger groups from families in urban and rural areas of Uzbekistan. Results of the Econometric analysis demonstrated that the decline in food consumption in households was assessed by a …

Status Of Crop Diversification And Its Empirical Analysis: A Case Study Of The Republic Of Uzbekistan, A.E. Primov

Irrigation and Melioration

The main objective of this study is to determine the status and level of crop diversification among farms in the country through an empirical analysis using panel data collected in 2009-2017. In doing so, we performed the Stata-16 software using the Simpson Diversification Index model in determining the diversification index. According to the results, the highest diversification indicators were found for Samarkand, Fergana and Tashkent regions, respectively, and accounted for 0.74, 0.74 and 0.76, respectively. It can be seen that the existing farms in Tashkent region used more diversified crops than in other regions of the country. The average diversification …

Efficiency Of Using Graphic Software In The Design Of Hydrotechnical Structures, U.A. Nasritdinova, A.M. Khodjaev, Z.I. Kayumova

Irrigation and Melioration

The article examines the work of scientists engaged in research in this area in the design of hydrotechnic structures. The possibilities of design programs for the application of the results of scientific research in the educational process were used. Thanks to the design in these programs, practical tasks are carried out with the utmost precision. The use of computer technology in teaching the subject "Hydrotechnical structures" and the use of graphic software AutoCAD in the design of linear platforms for clothing, curved platforms for clothing from hydrotechnical structures are shown in 2D and 3D three-dimensional modeling.

Hydraulic Balsa Wood Rising Bridge, Kaitlyn Greenfield

All Undergraduate Projects

What is the solution to allowing tall vessels to navigate past a vehicle bridge that is less than 10 [ft] above the water? To answer this question, a balsa wood bridge was designed, constructed, and tested. The bridge needed to articulate by mechanical means, allow for travel through the bridge, and be able to withstand ample force while the main structure only being constructed of balsa wood and glue. The project was analyzed in sections. These sections include: the bridge structure and its members, the hydraulic lift, and the pins needed for the bridge and hydraulic lift to operate. The …

Impact Of Blended Salt Anti-Icers/Deicers On Properties Of Asphalt Binders, Nurudeen A. Abidoye

College of Graduate Studies: Theses & Dissertations

Anyone who has ever attempted to remove a layer of ice from a roadway or sidewalk by plowing or shoveling knows it is no easy task when the ice is firmly bonded to the asphalt/concrete surface. Winter anti-icing/deicing operations are moral choices that mankind has made to combat winter storms. This research is aimed at evaluating the macro and nano structural impacts of (anti-icing/de-icing) salt on aged and unaged asphalt binders. The macro structural impacts focused on the rheological and creep properties, and the nano structural impacts focused on the surface topography, adhesion force, and modulus of asphalt binders. Rheological …

Timber Bridge Pile Splicing With Fiber Reinforced Polymer Wraps, Drew L. Damich

Graduate Theses, Dissertations, and Problem Reports (ETD)

Timber pile repair using splicing is widely used but little research has been done to determine their strength capacity after repair using this method. Current timber pile splicing mechanisms utilize various steel or wooden components. Fiber Reinforced Polymer (FRP) wraps can be utilized as replacement to conventional materials in splicing of timber piles. This study evaluated the strength capacities of traditional splicing mechanisms in relation to FRP wrap splice mechanisms. Traditional splicing mechanisms consisted of flat steel plate, C-channel steel plate, and wooden plate splices. The FRP wrap splice consisted of unidirectional glass/epoxy composite with three layers of fabric as …

Prospects For Solving The Problem Of Rational Use Of Water Resources Using The Tiiame-1 Sprinkling Machine, M.Kh. Khamidov, A.R. Muratov

Irrigation and Melioration

The information published by the International Commission on Irrigation and Drainage, and the intermediate results of many years of research carried out by scientists from TIIAME on the development, research and implementation of water-saving technologies in agriculture are presented. The acute shortage of water resources in Central Asia, the problems of increasing the efficiency of the use of water-saving technologies around the world have led to the careful use of available water resources in the region, including the prospects and advantages of using irrigation of crops by sprinkling, as well as the design and technical parameters of the sprinkler developed …