Engineering Education Commons^™

A Point Of Singularity For Technology And Engineering Education, Philip A. Reed

Educational Leadership & Workforce Development Faculty Publications

[First paragraph] I attended graduate school at Virginia Tech in the late 1990's and some of my fondest memories are from the side conversations with the faculty. The faculty at that time consisted of my mentor and program leader, Jim LaPorte, and other leaders in the field: Allen Bame, Sharon Brusic, Tom Jeffries, and Mark Sanders. Bill Dugger had recently retired from the university but maintained an office in Blacksburg to work full time on the Technology for All Americans Project (TfAAP, ITEEA, 2024) and he was very gracious about hosting students at the TfAAP office …

Impacts Of Open-Source Hardware Movements On Electronics Engineering Educational Outcomes, Angelica Tolentino Masa, Ralph Anthony Ramos Rafael, King Harold A. Recto

Electronics, Computer, and Communications Engineering Faculty Publications

The integration of the Open-source Hardware (OSHW) movement into electronics engineering education has not only democratized access to intricate designs but has also transformed the pedagogical landscape. OSHW's principles, inspired by the open-source software paradigm, have given rise to a collaborative learning environment where students bridge the gap between theoretical knowledge and practical application. This research, conducted through a rigorous methodology encompassing literature review, thematic analysis, and purposive sampling from reputable academic sources like IEEE Xplore, highlights the significant potential of OSHW. It not only enhances curriculum development and practical skill acquisition but also fosters a sense of global community …

Implementation Of Bayesian Statistics To Answer Diverse Engineering Questions: Applications In Cancer Immunology And Engineering Education, Anika C. Pirkey

Graduate Theses, Dissertations, and Problem Reports (ETD)

Quantitative Systems Pharmacology (QSP) refers to a mechanistic modeling approach used for assessing potential therapeutics by linking the molecular and cellular level mechanisms of the disease and therapeutic to the system-wide dynamics and clinical endpoints relevant to the disease. Although the field of QSP is still in its relative infancy, the mathematical methodology employed to predict the kinetics of these systems are not new and can be applied to a wide variety of systems. For instance, similar to QSP’s goal of guiding the development of novel therapeutics for various disease states, there exists a need to develop novel interventions in …

A Design Team’S Perspective-Mixing For Shared Empathic Understandings, Eunhye Kim, Robin Adams, Senay Purzer

School of Engineering Education Faculty Publications

Empathic design involves two social practices – collaboration with users and intra team collaboration forshared empathic understandings. This study is focused on the latter phenomenon, aiming to characterise a social mechanism underlying it. To achieve this objective, we used a framework of perspective-mixing in empathic design, including three distinct perspectives: first, second, and third-person perspectives. With this framework, we traced how team members share and integrate individuals’ user knowledge and insights to develop and apply their shared empathic understandings. We conducted conversation analysis to examine one design team’s conversations over a design journey from need-finding to initial ideation to prototyping …

Towards A Distributed Model Of Teaming: Instructor-Driven Lessons From I-Matter, Austin Morgan Kainoa Peters, Alice Pawley, Stephanie Masta, Darryl Dickerson, Matthew Ohland

School of Engineering Education Faculty Publications

This WIP research paper describes the development of a preliminary practical model to improve how instructors of large classes can address marginalization amongst teammates in small teams. We collected interviews with instructors of large first-year engineering classes at a large Midwestern, primarily white, research-intensive university, and analyzed them thematically drawing on Sue and colleagues’ microaggression theory, Cortina and colleagues’ articulation of selective incivility, and theory on coded language. Through iterative readings and coding, we offer an initial articulation of attributes demonstrated by instructors, and position those attributes in a preliminary contrasting model that prioritizes distributed responsibility over instructors being solely …

Board 398: Sustaining And Scaling The Impact Of The Midfield Project At The American Society For Engineering Education (Year 2), Susan M. Lord, Matthew Ohland, Marisa K. Orr, Richard A. Layton, Catherine E. Brawner, Russell Long, Haleh Barmaki Brotherton, Hayaam Osman, Joe Roy

School of Engineering Education Faculty Publications

The Multiple Institution Database for Investigating Engineering Longitudinal Development (MIDFIELD) has been developed over many years with substantial investment by the National Science Foundation through Engineering Education and Centers in the Engineering Directorate and the Division of Undergraduate Education in the Education and Human Resources Directorate. This project is focused on transitioning MIDFIELD to the American Society for Engineering Education (ASEE). The current team of MIDFIELD researchers continues to support this project including helping others learn to use the database. We have developed detailed tutorials in R that introduce MIDFIELD, key metrics, and example scenarios. We have also designed and …

Board 438: Year Two Of Developing A New Dataset For Analyzing Engineering Curricula, David Reeping, Kenneth Reid, Matthew Ohland, Nahal Rashedi

School of Engineering Education Faculty Publications

This paper discusses the developments during Year 2 for a project concerned with analyzing the curricula of engineering programs in the United States to understand the structural barriers embedded in degree requirements that could push out diverse groups of students. We are using an emerging method for quantifying the complexity of these programs called Curricular Analytics. This method involves treating the prerequisite relationships between courses as a network and applying graph theoretic measures to calculate a curriculum’s structure complexity. In Year 1, we collected 497 plans of study representing five engineering disciplines (i.e., Mechanical, Civil, Electrical, Chemical, and Industrial) across …

Teaching Analytics Online: A Self-Study Of Professional Practice, Andrew J. Collins, Brandon Butler, James F. Leathrum Jr., Christopher J. Lynch

Engineering Management & Systems Engineering Faculty Publications

As the COVID-19 pandemic caused severe disruption to education enterprises throughout the world, the main response by educational institutions was to move to online learning environments. The purpose of this study was to understand better how instructors could improve online learning for a professional-level week-long short course in a highly technical area (data analytics), which had, pre-COVID, been a hands-on computer, laboratory-based learning experience. The authors used self-study of professional practice to elicit and understand the major issues and concerns of the transition to an online learning environment. Under the guidance of a colleague in teacher education, three course instructors …

Assessing Industry-Critical Skill Development In Engineering Technology Capstone Courses, Rustin Webster, Matthew Turner

School of Engineering Technology Faculty Publications

To meet industrial expectations, engineering and engineering technology (ET) graduates are expected to possess the critical competencies of design, problem-solving, communication, and teamwork. However, industry stakeholders and academic studies routinely identify these as skills gaps: areas graduates need to develop to a higher standard or are currently lacking when entering the work force. To address this issue, many undergraduate programs in the United States have implemented a comprehensive and integrative experience at the end of an academic program, often called a capstone course(s). The rate of adoption has grown such that approximately three-quarters of all undergraduate and graduate institutions include …

The Nexus Of Ideation And Engagement Through Tower Crane Construction, Abigail Erskine, Hillary Ongoyo Omoze

Indiana STEM Education Conference

In this study, we investigate how the integration of collaborative design activities during group-based ideation influences middle school students’ engagement in STEM education. Central to this inquiry is a hands-on activity focused on the construction of a tower crane with a suspended bucket. Students developed a plan for the tower crane construction through collaborative sketches and discussion of ideas with teammates. This research brief provides implications for the impact of collaborative ideas generated by students in groups and choices in designs on student engagement.

Integrated Stem Education And Students' 21st Century Skills, Jung Han, Yunjin Lim, Woongbin Park, Kyongson Park

Indiana STEM Education Conference

This research investigates the impact of integrated STEM education on students' 21st century competencies, aiming to enhance science and engineering design teaching within a local design-based context. Specifically, the project targets high school students in a rural area and utilizes local contexts, including local rural knowledge and indigenous science knowledge, to facilitate STEM learning. The collaborative effort involves partnering high school environmental science and Technology and Engineering Educators, leveraging their diverse content expertise to teach students collaboratively as a science-technology and engineering teacher pair. Furthermore, university faculty members and industry partners provided support to create a STEM community of practice. …

Implementing Integrated Stem Forensic And Soil Sciences Lab Activities To Promote Interest In Stem Careers, Mariah K. Stollar Awan, Caroline J. Rakowski

Indiana STEM Education Conference

We implemented forensic and soil science integrated STEM lab activities with 11 middle school youth at a 4-H day camp at Purdue University. STEM perceived knowledge increased overall for participants. However, the pre- and post-assessments did not show a statistically significant difference. More students also indicated STEM career interest after participating. Because this study was exploratory and had a small sample size, more research on these integrated STEM lab activities should be conducted with larger samples.

The Future Of Future City: A Stem Program, Jeffrey A. Nowak, Shelby Werling

Indiana STEM Education Conference

The idea of integrating science, technology, engineering, and mathematics (STEM) is still an enigma for many educators (Dare et al, 2021). Recent academic standards favor curricula that interweave the principles of integrated STEM into all content areas. Finding a “one size fits all” curriculum is challenging, perhaps even impossible. Future City is a national program that specializes in hands-on cross-curricular STEM education. Students work collaboratively using an engineering and design process to showcase their solutions to citywide sustainability issues. This research brief examines how educators can utilize the Future City program as the cornerstone of their STEM curriculum.

The Impact Of Geospatial Contexts And Out-Of-School Experiences On Students' Stem Identity Formation, Hillary Ongoyo Omoze, Abigail Erskine, Asenath Odondi

Indiana STEM Education Conference

STEM teaching faces challenges in varied geospatial contexts (Mulvey et al., 2023), where place and space factors play a significant role. This research brief explores the influence of place and space in shaping students' STEM identities throughout their educational journey, with a specific emphasis on the role of out-of-school experiences in fostering student learning and interest in STEM careers, particularly among middle school students.

Proceedings Of The Ninth Annual Indiana Stem Education Conference: Resourcing Stem Education, William S. Walker Iii, Lynn A. Bryan, S. Selcen Guzey

Indiana STEM Education Conference

The Proceedings of the Ninth Annual Indiana STEM Education Conference are edited by the Center for Advancing the Teaching and Learning of STEM (CATALYST, https://www.education.purdue.edu/catalyst/) at Purdue University. The theme for the 2024 conference is Resourcing STEM Education. This year’s Indiana STEM Education Conference provides opportunities to learn about effective STEM education strategies, curriculum, and resources to engage students in integrated STEM learning opportunities and address the recently updated Indiana Academic Standards for Science and Computer Science, Indiana Academic Standards for Mathematics, and Indiana Academic Standards for Integrated STEM (https://www.in.gov/doe/students/indiana-academic-standards/).

Transitioning To A Lower Global Warming Refrigerant, A Performance Study Of R-513a And Hfc-134a In Commercial Chillers, Hossein Abedsoltan, Mark B. Shiflett

Chemical and Biochemical Engineering Faculty Research & Creative Works

The performance of R-513A and HFC-134a refrigerants is compared in two identical chillers operating at the University of Kansas. R-513A is a more environmentally friendly refrigerant due to its lower global warming potential that can be used as a retrofit replacement for HFC-134a in chillers. This study investigates the performance comparison of transitioning from HFC-134a to R-513A. The chillers have been in operation for two years, and cooling capacity, coefficient of performance, and other operating parameters are compared under similar cooling conditions. Cooling capacities ranged from 100 to 500 kW for both chillers. Overall, the energy consumption and coefficient of …

Inaugural Future Of Bse Days: Workshop Report, Mark Stone

Department of Agricultural and Biological Systems Engineering: Presentations and White Papers

The inaugural Future of BSE Days (FBD) event, held on May 2-3, 2024, brought together the Biological Systems Engineering (BSE) community to discuss and shape the future of work and learning within the field. The event was designed to foster collaboration between faculty, students, industry leaders, and alumni, with the goal of reimagining the department’s educational approach, enhancing industry partnerships, and preparing students for the challenges of tomorrow. Over the course of two days, participants engaged in insightful discussions, workshops, and presentations that highlighted both the strengths of the department and opportunities for growth.

The workshop resulted in several key …

Student Use Of Anchors And Metacognitive Strategies In Reflection, Anu Singh, Heidi A. Diefes-Dux

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Context: Self-regulation, a skillset involving taking charge of one’s own learning processes, is crucial for workplace success. Learners develop self-regulation skills through reflection where they recognize weaknesses and strengths by employing metacognitive strategies: planning, monitoring, and evaluating. Use of anchors assists learners’ engagement in reflection. Purpose or Goal: The purpose of this work was to gain insight into students’ use of anchors when reflecting on their learning. The two research questions: (1) To what extent do students link their self-evaluation and learning objective (LO) self-ratings to their reflections? and (2) What dimensions and level of metacognitive strategies do students use …

Immersive Visualization In Infrastructure Planning: Enhancing Long-Term Resilience And Sustainability, Dalya Ismael

Engineering Technology Faculty Publications

Infrastructure decisions today significantly impact future generations' quality of life, especially as severe storms and rising sea levels increasingly threaten communities across the United States. Decision-makers at all levels, including those involved in disaster prevention and response, must address climate change. However, those in infrastructure design and construction often prioritize immediate gains over long-term resilience. Engineering teams typically employ decision tools to manage complexity, but these methods may not highlight the long-term consequences of their choices. This study tests whether integrating Virtual Reality (VR) technology with engineering decision-making tools, can enhance engineers’ ability to visualize the future impacts of their …

Long-Term Impact Of A Semester-Long Multidisciplinary Service-Learning Assignment In A Fluid Mechanics Course, Orlando M. Ayala, Kristie Gutierrez, Isaac Koduah Kumi, Francisco Cima, Stacie I. Ringleb, Krishnanand Kaipa, Danielle M. Rhemer, Pilar Pazos, Jennifer Jill Kidd

Engineering Technology Faculty Publications

Seventy-three students who enrolled in a senior-year level fluid mechanics course during spring semesters from 2019-2023 were asked about their perceptions on the impact in their professional preparation of a semester-long multidisciplinary service-learning assignment. This paper aims to evaluate their current perceived impact of the assignment (long-term impact) and whether it might have changed from when they took the course (short-term impact). The project tested their creativity, knowledge of fluid mechanics concepts, and skills to work with people from other disciplines. They were told that they were working for a hypothetical company, “Engineering is for all,” and were assigned to …

Four Decades Of Distance Learning Instruction In An Electrical Engineering Technology Program, Otilia Popescu, Isaac L. Flory Iv, John R. Hackworth, Murat Kuzlu

Engineering Technology Faculty Publications

Online instruction is no longer a new or seldom used modality. It has grown over the last few decades, reaching a pinnacle during the recent pandemic. Different institutions and different programs chose different approaches for the online delivery of courses, adopting either synchronous or asynchronous deliveries for online students, and hybrid delivery for mixed groups of campus and online students attending the classes in a live or synchronous manner. This paper’s main goal is to present the history of over 40 years of distance learning in an Electrical Engineering Technology program and how the delivery mode progressed over time. While …

Advancing The Manufacturing Engineering Technology Pathway: Innovating And Developing The Curriculum (Courses And Labs) From Associate To Bachelor's Level, Afi Anuar, Vukica Jovanovic, Nathan Luetke, Hamid Eisazadeh, Isaac Flory Iv, Mileta Tomović, Anthony W. Dean

Engineering Technology Faculty Publications

The southeastern region of Virginia, specifically Hampton Roads, has a diverse manufacturing landscape encompassing a range of enterprises, from small businesses to large corporations. This sector includes shipbuilding, construction machinery, aeronautics, and food processing. However, both the region and the broader state of Virginia are struggling with a skilled labor shortage that fails to meet the demands of these manufacturing enterprises. This paper aims to provide insights into the recently established Manufacturing Engineering Technology (MFET) program at Old Dominion University, located in Norfolk, Virginia. The MFET program features a comprehensive curriculum, encompassing the development of new courses and the establishment …

A Project-Based Learning Activity For An Engineering Technology Heat Transfer Course To Design A Shell-And-Tube Heat Exchanger, Nathan Luetke, Orlando Ayala

Engineering Technology Faculty Publications

Thermofluids courses demand a strong grasp of mathematics and employ physics extensively to describe physical systems. Heat transfer, in particular, presents challenging topics, which can be even more daunting for engineering technology students. In this paper, we present the implementation of a project-based learning activity in the engineering technology heat transfer course. The students' task involves designing a shell-and-tube heat exchanger to meet specific minimum requirements. The objective is to provide students with a real-world assignment that enhances their heat transfer calculation skills. To accommodate instructors' busy schedules, we have developed an assignment that is user friendly. Detailed instructor guides …

The Benefits Of Interdisciplinary Learning Opportunities For Undergraduate Mechanical Engineering Students, Isaac Koduah Kumi, Stacie I. Ringleb, Francisco Cima, Orlando M. Ayala, Krishnanand Kaipa, Jennifer Jill Kidd, Kristie Gutierrez, Pilar Pazos, Danielle Marie Rhemer

Mechanical & Aerospace Engineering Faculty Publications

Two project-based learning approaches were implemented in a 100-level information literacy class in the Mechanical Engineering program at a mid-Atlantic university. One approach, the treatment group, partnered engineering students with education students to develop and deliver engineering lessons to elementary school students. In the second approach, the comparison group, engineering students were partnered with their engineering classmates to work on an engineering problem using the engineering design process. The two projects were designed to have similar durations and course point values. For both projects, teams were formed, and peer evaluations were completed using the Comprehensive Assessment of Team Member Effectiveness …

Immersive Virtual Labs For Enhancing In-Person And Online Education, Yiyang Li, Yuzhong Shen, Charles I. Sukenik

Electrical & Computer Engineering Faculty Publications

Labs play a critical role in science and engineering education, offering practical insights and hands-on experience to students that can't be achieved through theoretical learning alone. With the continuous advancement in technology, education is being reshaped and many universities are now offering online programs. This shift in educational paradigm offers students access to a wider range of academic resources, without being limited by geographical boundaries, time constraints, among others. However, the rise of online education also brings unique challenges, such as lack of face-to-face interaction and limited hands-on learning experiences. Virtual labs, which allow students to conduct experiments in a …

Visual Representation Based Creative Problem Solving (Cps) For Microelectronic Course, Gon Namkoong, Tian Luo

Electrical & Computer Engineering Faculty Publications

Microelectronic technologies become the basis for many modern revolutions and require technological innovation and creative transformation of new knowledge into products. This demands our engineering students to be more innovative and creative than ever. It also requires solid resources and strategies to cultivate higher-order thinking skills for engineering students. Presently, microelectronic course covers a wide range of topic areas, including basic semiconductor, pn junction diode, metal oxide semiconductor field effect transistor (MOSFET) and bipolar junction transistor (BJT) circuits. A traditional teaching strategy in a typical educational setting encompasses instructors delivering lectures to teach the basics and principles of microelectronic devices …

From Carnival Games To Plastic Filters: Preparing Elementary Preservice Teachers To Teach Engineering, Jennifer Kidd, Pilar Pazos, Kristie Gutierrez, Danielle Rhemer, Stacie Ringleb, Krishna Kaipa, Isaac Kumi, Orlando Ayala, Francisco Cima

Teaching & Learning Faculty Publications

Preservice teachers (PSTs) in an educational foundations course were tasked with leading elementary students in an engineering design challenge. In order to explore different approaches for helping the PSTs develop competence in engineering education, two implementation methods were tested. In Spring 2022, PSTs collaborated with undergraduate engineering students to develop carnival-themed design challenge lessons. In Fall 2022, PSTs worked with their PST classmates to teach a professionally prepared engineering lesson focused on designing plastic filters. PSTs’ knowledge of engineering and engineering pedagogy were compared across the two semesters using an exploratory approach. Both groups showed increases in engineering knowledge and …

Mouralherwaqh Coastal Wetland Road Crossing Da'luk, Romel Robinson Ii

Cal Poly Humboldt theses and projects

The integration of Indigenous and Western science plays an essential role in Tribally led collaborations for land management. This process of woven sciences is rooted in reciprocal relations and partnerships guided by Tribal Nations. Our cohort was invited by Wiyot Tribal Representatives to investigate a culvert located within the wetlands of Mouralherwaqh— a parcel of land reacquired by the Wiyot Tribe in 2022. This document seeks to share our experience and analysis as part of the Wiyot Tribe’s broader journey in navigating ecocultural restoration projects within Mouralherwaqh. The four community interests we investigated for the wetland crossing included a resized …

A Pilot Sexual Device Adaptation Project For Occupational Therapy Students: A Skills-Based Approach To Teaching Sexual Activity As An Adl Through Assistive Technology, Benjamin E. Canter, Zoe M. Loitz, Victoria E. Richardson, Tatiana B. Pontes, Leanna Katz, Kevin Berner, Pedro Htq Almeida

Journal of Occupational Therapy Education

Despite being categorized as an activity of daily living since the first edition of the Occupational Therapy Practice Framework, no Accreditation Council for Occupational Therapy Education (ACOTE) standards exist to provide guidance on teaching occupational therapy students about sexual activity as an activity of daily living (ADL). When discussed, sexual activity is usually taught via didactic lecture, but is a subject that would benefit from a skills-based approach to teaching. This pilot pedagogical exercise in a two-credit assistive technology class taught occupational therapy students to address the ADL of sexual activity with clients by having students adapt a sexual toy …

On Confidence And Sense Of Belonging In Cybersecurity Students: Analysis & Prediction, Sadaf Amna Sarwari

Graduate Theses, Dissertations, and Problem Reports (ETD)

In recent years, there has been a rapid expansion of cybersecurity programs across higher education institutions in response to the widening skills gap in the cybersecurity job market. This study adopts quantitative and qualitative approaches to identify factors influencing West Virginia University (WVU)’s LANE Department of Computer Science and Electrical Engineering (LCSEE) students’ confidence and sense of belonging in the cybersecurity field. The results are based on data collected from surveys administered to LCSEE students in April 2022 and April 2023. The responses were analyzed using descriptive & inferential statistics and logistic regression techniques. Additionally, the 2023 data was utilized …