Engineering Education Commons^™

Disciplinary Learning From An Authentic Engineering Context, Catherine Langman, Judith Zawojewski, Patricia Mcnicholas, Ali Cinar, Eric Brey, Mustafa Bilgic, Hamidreza Mehdizadeh

Journal of Pre-College Engineering Education Research (J-PEER)

This small-scale design study describes disciplinary learning in mathematical modeling and science from an authentic engineeringthemed module. Current research in tissue engineering served as source material for the module, including science content for readings and a mathematical modeling activity in which students work in small teams to design a model in response to a problem from a client. The design of the module was guided by well-established principles of model-eliciting activities (a special class of problem-solving activities deeply studied in mathematics education) and recently published implementation design principles, which emphasize the portability of model-eliciting activities to many classroom settings.

Two …

Implementing Ngss Engineering Disciplinary Core Ideas In Middle School Science Classrooms: Results From The Field, Jessica Gale, Jayma Koval, Mike Ryan, Marion Usselman, Stefanie Wind

Journal of Pre-College Engineering Education Research (J-PEER)

With the inclusion of engineering disciplinary core ideas (DCIs), the Next Generation Science Standards (NGSS) position engineering as a new priority in K–12 science classrooms. This paper reports findings from the implementation of SLIDER, a problem-based learning 8th grade physical science curriculum that integrates engineering and physical science core ideas. As a culminating engineering design challenge, the SLIDER curriculum asks students to apply their understanding of energy, motion, and forces to design an automatic braking system for a robotic truck. The paper describes the curriculum and synthesizes findings from an array of data sources including student design interviews, written design …

Search And Review Of The Literature On Engineering Design Challenges In Secondary School Settings, Matthew Lammi, Cameron Denson, Paul Asunda

Journal of Pre-College Engineering Education Research (J-PEER)

Engineering design activities offer the promise of enhanced learning and teaching in pre-college science, technology, engineering, and mathematics (STEM) settings. The wide variation and lack of coherence in research and practice concerning pre-college engineering design challenges necessitates an investigation of the literature. The overarching research question guiding this search and review of literature was, ‘‘How are engineering design challenges conceptualized in pre-college environments?’’ A search and review coupled with iterative thematic analysis was employed to understand and conceptualize the current body of literature on pre-college engineering design challenges. It is anticipated that this review will provide a general picture of …

Stem Roles: How Students’ Ontological Perspectives Facilitate Stem Identities, Dina Verdín, Allison Godwin, Monique Ross

Journal of Pre-College Engineering Education Research (J-PEER)

Educational researchers have explored the importance of performance, recognition, and interest in establishing and maintaining a STEM identity. Research has also demonstrated that the ways students describe themselves and how they participate in STEM communities can provide insight into their role identity salience; however, there has been little work to explore the ontological beliefs of students about STEM people and how this influences their ability to see themselves as possessing a STEM identity. This research explores the ontological beliefs of high school students, with specific attention to the ways in which they describe what constitutes a math person, science person, …

How To Shape Attitudes Toward Stem Careers: The Search For The Most Impactful Extracurricular Clubs, Fethiye Ozis, Ali Osman Pektas, Mustafa Akca, Daniel’Le April Devoss

Journal of Pre-College Engineering Education Research (J-PEER)

It is well known that strong extracurricular STEM programs provide multiple arenas for students to expand on classroom curriculum, complementing STEM skills with creative thinking and open-ended problem solving. It has been shown that there is a relationship between the number of STEM clubs students participated in and their choice of STEM major (Sahin, 2013). Considering financial problems, including budget cuts, it gets really challenging for schools to provide a plethora of clubs. For this reason, it would be very beneficial for K–12 schools to know if certain clubs are more effective in changing attitudes toward STEM majors, and therefore …

‘‘Lend A Hand’’ Project Helps Students: Improved Spatial Visualization Skills Through Engaging In Hands-On 3-D Printed Prosthetics Project During A 9th Grade Engineering Course, Shaunna Smith, Kimberly Talley

Journal of Pre-College Engineering Education Research (J-PEER)

Research shows that high spatial ability is linked to success and persistence in STEM. Empirical investigations often report a gender gap in favor of male students. The purpose of this research study was to assess changes to 9th grade engineering students’ spatial visualization skills through engagement in a nine-week collaborative 3-D printed prosthetics project embedded within their existing ‘‘Beginning Concepts of Engineering’’ course curriculum. Using concurrent mixed methods, this study examined pre-/post-test scores on the Revised Purdue Spatial Visualization Test: Rotations (Revised PSVT:R) in connection with gender, course grades, and level of involvement in the project. Both male and female …

Choosing Stem College Majors: Exploring The Role Of Pre-College Engineering Courses, L. Allen Phelps, Eric M. Camburn, Sookweon Min

Journal of Pre-College Engineering Education Research (J-PEER)

Despite the recent policy proclamations urging state and local educators to implement integrated science, technology, engineering, and mathematics (STEM) curricula, relatively little is known about the role and impact of pre-college engineering courses within these initiatives. When combined with appropriate mathematics and science courses, high school engineering and engineering technology (E&ET) courses may have the potential to provide students with pre-college learning experiences that encourage them to pursue STEM college majors. Our central research question was: What is the nature and extent of any relationship between high school E&ET course completion and subsequent selection of a STEM major in a …

Supporting Mechanistic Reasoning In Domain-Specific Contexts, Paul J. Weinberg

Journal of Pre-College Engineering Education Research (J-PEER)

Mechanistic reasoning is an epistemic practice central within science, technology, engineering, and mathematics disciplines. Although there has been some work on mechanistic reasoning in the research literature and standards documents, much of this work targets domain-general characterizations of mechanistic reasoning; this study provides domain-specific illustrations of mechanistic reasoning. The data in this study comes from the Assessment of Mechanistic Reasoning Project (AMRP) (Weinberg, 2012), designed using item response theory modeling to diagnose individuals’ mechanistic reasoning about systems of levers. Such a characterization of mechanistic reasoning illuminates what is easy and difficult about this form of reasoning, within the subdomain of …

Latinx And Caucasian Elementary School Children’S Knowledge Of And Interest In Engineering Activities, Gamze Ozogul, Cindy Faith Miller, Martin Reisslein

Journal of Pre-College Engineering Education Research (J-PEER)

Ethnic minorities, such as Latinx people of Hispanic or Latino origin, and women earn fewer engineering degrees than Caucasians and men. With shifting population dynamics and high demands for a technically qualified workforce, it is important to achieve broad participation in the engineering workforce by all ethnicities and both genders. Previous research has examined the knowledge of and interest in engineering among students in grades five and higher. In contrast, the present study examined elementary school students in grades K–5. The study found that older students in grades 4 and 5 had both greater knowledge of engineering occupational activities and …

Approaches To Integrating Engineering In Stem Units And Student Achievement Gains, Elizabeth A. Crotty, Selcen S. Guzey, Gillian H. Roehrig, Aran W. Glancy, Elizabeth A. Ring-Whalen, Tamara J. Moore

Journal of Pre-College Engineering Education Research (J-PEER)

This study examined different approaches to integrating engineering practices in science, technology, engineering, and mathematics (STEM) curriculum units. These various approaches were correlated with student outcomes on engineering assessment items. There are numerous reform documents in the USA and around the world that emphasize the need to incorporate engineering into science education. The authors of this study contend that different approaches to integrating engineering in STEM units correlate to larger student achievement gains in engineering, based on assessment items developed from the Framework for Quality K–12 Engineering Education (Moore, Glancy, Tank, Kersten, & Smith, 2014). The goal of this work …

Teachers’ Incorporation Of Argumentation To Support Engineering Learning In Stem Integration Curricula, Corey A. Mathis, Emilie A. Siverling, Aran W. Glancy, Tamara J. Moore

Journal of Pre-College Engineering Education Research (J-PEER)

One of the fundamental practices identified in Next Generation Science Standards (NGSS) is argumentation, which has been researched in P-12 science education for the previous two decades but has yet to be studied within the context of P-12 engineering education. This research explores how elementary and middle school science teachers incorporated argumentation into engineering design-based STEM (science, technology, engineering, and mathematics) integration curricular units they developed during a professional development program. To gain a better understanding of how teachers included argumentation in their curricula, a multiple case study approach was conducted using four STEM integration units. While evidence of argumentation …

Students’ Successes And Challenges Applying Data Analysis And Measurement Skills In A Fifth-Grade Integrated Stem Unit, Aran W. Glancy, Tamara J. Moore, Selcen Guzey, Karl A. Smith

Journal of Pre-College Engineering Education Research (J-PEER)

An understanding of statistics and skills in data analysis are becoming more and more essential, yet research consistently shows that students struggle with these concepts at all levels. This case study documents some of the struggles four groups of fifth-grade students encounter as they collect, organize, and interpret data and then ultimately attempt to draw conclusions or make decisions based on these data. The activities in which the students engaged were part of an integrated science, technology, engineering, and mathematics (STEM) unit that had students collecting and analyzing data both in the context of learning science concepts and in the …

Perspectives On Failure In The Classroom By Elementary Teachers New To Teaching Engineering, Pamela S. Lottero-Perdue, Elizabeth A. Parry

Journal of Pre-College Engineering Education Research (J-PEER)

This mixed methods study examines perspectives on failure in the classroom by elementary teachers new to teaching engineering. The study participants included 254 teachers in third, fourth, and fifth grade who responded to survey questions about failure, as well as a subset of 38 of those teachers who participated in interviews about failure. The study first examines the literature about failure in the contexts of engineering and education. Failure is positioned as largely normative and expected in engineering, whereas in education, learning and failure have a more tenuous relationship. Identity, failure avoidance, failure as part of the learning process, growth …

Undergraduate Engineers And Teachers: Can Students Be Both?, Malinda S. Zarske, Maia L. Vadeen, Janet Y. Tsai, Jacquelyn F. Sullivan, Denise W. Carlson

Journal of Pre-College Engineering Education Research (J-PEER)

Today’s college-aged students are graduating into a world that relies on multidisciplinary talents to succeed. Engineering college majors are more likely to find jobs after college that are outside of STEM (science, technology, engineering, and mathematics) fields, including jobs in healthcare, management, and social services. A survey of engineering undergraduate students at the University of Colorado Boulder in November 2012 indicated a desire by students to simultaneously pursue secondary teacher licensure alongside their engineering degrees: 25 percent ‘‘agreed’’ or ‘‘strongly agreed’’ that they ‘‘would be interested in earning grades 7–12 science or math teaching licenses while [they] earn [their] engineering …

Examining Experienced Teachers’ Noticing Of And Responses To Students’ Engineering, Aaron W. Johnson, Kristen B. Wendell, Jessica Watkins

Journal of Pre-College Engineering Education Research (J-PEER)

Engineering design places unique demands on teachers, as students are coming up with new, unanticipated ideas to problems along often unpredictable trajectories. These demands motivate a responsive approach to teaching, in which teachers attend their students’ thinking and flexibly adapt their instructional plans and objectives. A great deal of literature has focused on responsive teaching in science and mathematics, but there has been little research or professional development on this approach in engineering. In this work, we conducted clinical video-based interviews with six elementary teachers experienced in teaching engineering to discuss what they noticed in their students’ thinking and how …

Elementary Teachers’ Reflections On Design Failures And Use Of Fail Words After Teaching Engineering For Two Years, Pamela S. Lottero-Perdue, Elizabeth A. Parry

Journal of Pre-College Engineering Education Research (J-PEER)

This mixed-methods study examines how teachers who have taught one or two units of the Engineering is Elementary (EiE) curriculum for two years reported on: students’ responses to design failure; the ways in which they, the teachers, supported these students and used fail words (e.g. fail, failure); and the teachers’ broad perspectives and messages to students about failure. In addition, the study explores how strategies, perspectives, messages, and fail word use may change after two years of engineering instruction. This study builds on previous work about elementary teachers’: perspectives on failure prior to teaching engineering, and responses to and perspectives …

Reasoning Strategies In The Context Of Engineering Design With Everyday Materials, Marcelo Worsley, Paulo Blikstein

Journal of Pre-College Engineering Education Research (J-PEER)

‘‘Making’’ represents an increasingly popular label for describing a form of engineering design. While making is growing in popularity, there are still open questions about the strategies that students are using in these activities. Assessing and improving learning in making/ engineering design contexts require that we have a better understanding of where students’ ideas are coming from and a better way to characterize student progress in open-ended learning environments. In this article, we use a qualitative analysis of students’ responses (N = 13) in order to identify the origins of their ideas. Four strategies emerged from this analysis: unexplained …

Reading And Engineering: Elementary Students’ Co-Application Of Comprehension Strategies And Engineering Design Processes, Amy Wilson-Lopez, Stacie Gregory, Victor Larsen

Journal of Pre-College Engineering Education Research (J-PEER)

For decades, researchers have asserted that K–12 teachers should embed reading comprehension instruction within each academic discipline, including ‘‘technical subjects’’ such as engineering. Recently, this assertion has become a source of controversy among researchers and practitioners who believe that time spent on teaching reading comprehension strategies may detract from time spent on more authentic activities such as engineering design. The purpose of this exploratory study was to investigate whether and how elementary students’ applications of comprehension strategies overlapped with their application of engineering design processes. The authors provided comprehension strategy instruction to 57 third- and fifth-grade students as they read …

Disciplinary Differences In Out-Of-School High School Science Experiences And Influence On Students’ Engineering Choices, Allison Godwin, Gerhard Sonnert, Philip M. Sadler

Journal of Pre-College Engineering Education Research (J-PEER)

Participation from a variety of students is important to the long-term growth of the engineering field. Much of the research on engineering recruitment or career choice has focused on engineering as a whole, even though engineering disciplines are varied in student participation and focus. This work examines how students’ out-of-school interests and experiences in high school predict the likelihood of choosing a career in a particular engineering discipline. Out-of-school experiences offer more unstructured ways for students to meaningfully engage with science and engineering outside of the confines of the classroom. These experiences offer opportunities to spark particular science interests not …

‘‘Can I Drop It This Time?’’ Gender And Collaborative Group Dynamics In An Engineering Design-Based Afterschool Program, Jessica Schnittka, Christine Schnittka

Journal of Pre-College Engineering Education Research (J-PEER)

The 21st century has brought an increasing demand for expertise in science, technology, engineering, and math (STEM). Although strides have been made towards increasing gender diversity in several of these disciplines, engineering remains primarily male dominated. In response, the U.S. educational system has attempted to make engineering curriculum more engaging, informative, and welcoming to girls. Specifically, project-based and design-based learning pedagogies promise to make engineering interesting and accessible for girls while enculturating them into the world of engineering and scientific inquiry. Outcomes for girls learning in these contexts have been mixed. The purpose of this study was to explore how …

Professional Development For The Integration Of Engineering In High School Stem Classrooms, Jonathan E. Singer, Julia M. Ross, Yvette Jackson-Lee

Journal of Pre-College Engineering Education Research (J-PEER)

Science, Technology, Engineering, and Mathematics (STEM) education in the U.S. is in transition. The recently published A Framework for K-12 Science Education: Practices, Crosscutting Concepts, and Core Ideas as well as the Next Generation Science Standards are responsive to this call and clearly articulate a vision that includes engineering practices as key components. This shift presents significant challenges to school districts owing to a stark lack of research-based engineering-focused instructional materials and corresponding teacher professional development. The purpose of this study was to investigate the impact of a professional development program on high school STEM teachers’ ability to enact design-based …

How Engineering Standards Are Interpreted And Translated For Middle School, Eugene Judson, John Ernzen, Stephen Krause, James A. Middleton, Robert J. Culbertson

Journal of Pre-College Engineering Education Research (J-PEER)

In this exploratory study we examined the alignment of Next Generation Science Standards (NGSS) middle school engineering design standards with lesson ideas from middle school teachers, science education faculty, and engineering faculty (4–6 members per group). Respondents were prompted to provide plain language interpretations of two middle school Engineering Design performance expectations and to provide examples of how the performance expectations could be applied in middle school classrooms. Participants indicated the challenges and benefits of implementing these performance expectations and indicated personal experiences that helped them to interpret the performance expectations.

Quality of lessons differed depending on the performance expectation …

Quantifying The Information Habits Of High School Students Engaged In Engineering Design, Nathan Mentzer, Michael J. Fosmire

Journal of Pre-College Engineering Education Research (J-PEER)

stract This study measured the information gathering behaviors of high school students who had taken engineering design courses as they solved a design problem. The authors investigated what types of information students accessed, its quality, when it was accessed during the students’ process, and if it impacted their thinking during the activity. Students overwhelmingly relied on internet searching to acquire information, rather than printed materials available to them. The sites they found were generally popular rather than technical, and persuasive (i.e., trying to sell something) rather than informative. The high school students understood the need for information, as they sought …

Effect Of An Engineering Camp On Students’ Perceptions Of Engineering And Technology, Rebekah Hammack, Toni A. Ivey, Juliana Utley, Karen A. High

Journal of Pre-College Engineering Education Research (J-PEER)

Students’ knowledge about a profession influences their future decisions about careers. Research indicates that students tend to hold stereotypical views of engineers, which would hinder engineering as a career choice. The purpose of this study was to measure how participating in a week long engineering summer camp affected middle school students’ (N519) attitudes towards engineering and their conceptions of engineering and technology. Results indicate that participation in the programs had a positive impact on the students’ understandings of what technology is and the work engineers do. Although the results indicate a positive impact on participants, it is not clear which …

Teacher Beliefs About Motivating And Teaching Students To Carry Out Engineering Design Challenges: Some Initial Data, James P. Van Haneghan, Susan A. Pruet, Rhonda Neal-Waltman, Jessica M. Harlan

Journal of Pre-College Engineering Education Research (J-PEER)

The present study examines middle school teachers’ beliefs about seven learning outcomes related to a project that involves developing and examining the effects of a set of engineering design modules constructed for use by middle school math and science teachers. Overall, the teachers involved in the intervention appear to believe they have the instructional skills, professional development, and resources to carry out the modules. Teachers from all of the schools (both intervention and comparison schools) for the most part valued the outcomes as important. Results of the study indicate that, although teachers believe they value and can obtain most of …

Math, Science, And Engineering Integration In A High School Engineering Course: A Qualitative Study, Clara G. Valtorta, Leema K. Berland

Journal of Pre-College Engineering Education Research (J-PEER)

Engineering in K-12 classrooms has been receiving expanding emphasis in the United States. The integration of science, mathematics, and engineering is a benefit and goal of K-12 engineering; however, current empirical research on the efficacy of K-12 science, mathematics, and engineering integration is limited. This study adds to this growing field, using discourse analysis techniques to examine whether and why students integrate math and science concepts into their engineering design work. The study focuses on student work during a unit from a high school engineering course. Video data were collected during the unit and were used to identify episodes of …

Beyond Blackboards: Engaging Underserved Middle School Students In Engineering, Sarah Blanchard, Justina Judy, Chandra Muller, Richard H. Crawford, Anthony J. Petrosino, Christina K. White, Fu-An Lin, Kristin L. Wood

Journal of Pre-College Engineering Education Research (J-PEER)

Beyond Blackboards is an inquiry-centered, after-school program designed to enhance middle school students’ engagement with engineering through design-based experiences focused on the 21st Century Engineering Challenges. Set within a predominantly lowincome, majority-minority community, our study aims to investigate the impact of Beyond Blackboards on students’ interest in and understanding of engineering, as well as their ability to align their educational and career plans. We compare participants’ and nonparticipants’ questionnaire responses before the implementation and at the end of the program’s first academic year. Statistically significant findings indicate a school-wide increase in students’ interest in engineering careers, supporting a shift in …

Design Practices Of Preservice Elementary Teachers In An Integrated Engineering And Literature Experience, Kristen Bethke Wendell

Journal of Pre-College Engineering Education Research (J-PEER)

The incorporation of engineering practices and core ideas into the Next Generation Science Standards at the elementary school level provides exciting opportunities but also raises important questions about the preparation of new elementary teachers. Both the teacher education and engineering education communities have a limited literature base on the resources that novice elementary teachers bring to learning and teaching engineering. The purpose of this descriptive exploratory research study was to characterize the design practices used by preservice elementary teachers during an integrated engineering and literature experience. Using a modification of the Design Activity Coding Scheme (Atman et al., 2007), we …

High And Low Computer Self-Efficacy Groups And Their Learning Behavior From Self-Regulated Learning Perspective While Engaged In Interactive Learning Modules, Harry B. Santoso, Oenardi Lawanto, Kurt Becker, Ning Fang, Edward M. Reeve

Journal of Pre-College Engineering Education Research (J-PEER)

The purpose of this research was to investigate high school students’ computer self-efficacy (CSE) and learning behavior in a selfregulated learning (SRL) framework while utilizing an interactive learning module. The researcher hypothesizes that CSE is reflected on cognitive actions and metacognitive strategies while the students are engaged with interactive learning modules. Two research questions guided this research: (1) how is students’ CSE while engaged in interactive learning modules? and (2) how do high and low CSE groups plan and monitor their cognitive action, and regulate their monitoring strategies based on their CSE level? The research used a mixedmethods approach to …

Gender Differences In The Consistency Of Middle School Students’ Interest In Engineering And Science Careers, Marsha Ing, Pamela R. Aschbacher, Sherry M. Tsai

Journal of Pre-College Engineering Education Research (J-PEER)

This longitudinal study analyzes survey responses in seventh, eighth, and ninth grade from diverse public school students (n = 482) to explore gender differences in engineering and science career preferences. Females were far more likely to express interest in a science career (31%) than an engineering career (13%), while the reverse was true for males (58% in engineering, 39% in science). After controlling for student and school demographic characteristics, females were as consistent as males in their science career interests during the three years of the study but less consistent in their engineering career interests. Knowing an engineer significantly …