Engineering Education Commons^™

Validating The Critical Engineering Literacy Test (Celt) With Cognitive Interviews, Margot L. Keimig, Senay Purzer

The Summer Undergraduate Research Fellowship (SURF) Symposium

The CELT learning assessment focuses on the critical thinking skills of engineering students and allows for the improvement of information literacy, one’s ability identifying and implementing important information. With the pairing of cognitive interviewing, the CELT will allow for the identification of errors and will better determine the reasoning in the decisions made by the students taking the test. The CELT test uses multiple choice and open response questions to evaluate the students and the areas where improvements need to be made. Over the course of the year, the students’ information literacy skills will be expanded and then re-evaluated at …

Visualizing Mechanics: Improving Student Learning Through Video Demonstrations, Blake A. Wetherton, Olumide A. Awofeso, Carolyn E. Creighton, Adam F. Potrzebowski, Charles M. Krousgrill, Jeffrey F. Rhoads

The Summer Undergraduate Research Fellowship (SURF) Symposium

The Purdue Mechanics Freeform Classroom (PMFC) is a project that seeks to reform engineering mechanics education by integrating content and technology; enhancing communication between students, their peers, and instructors; accommodating a broader range of learning styles; and facilitating greater depths of understanding. In an attempt to increase the PMFC’s efficacy, a series of demonstration videos has been produced. As demonstrated by the popularity and pervasiveness of websites such as YouTube, short videos have the potential to captivate audiences. As such, these videos have incredible promise in educational contexts. In the PMFC series of videos, entitled Visualizing Mechanics, each imitates the …

Development Of Pneumatic Robot For Outreach, Eshamogbo E. Ojuba, John Lumkes

The Summer Undergraduate Research Fellowship (SURF) Symposium

To encourage the current generation of high school and middle school students to pursue careers in engineering, it is important to have challenging hands-on engineering activities for them. Such activities should be interesting, compelling, and, most importantly, educative. A mini-excavator was built for fluid power outreach, but this tool only demonstrates fluid power, without showing other important aspects of engineering. The tool being developed is able to demonstrate fluid power, as well as other important aspects of engineering, such as controls, electronics, and programming. This tool is an electronically-controlled device that allows the user control a pneumatic circuit, coupled with …

Why Do Indiana Pre-Service Technology Education Majors Choose The Profession, Traves L. Freeland

Purdue Polytechnic Masters Theses

The purpose of this descriptive study was to look at the factors that influence pre-service technology education majors to choose to become teachers. The pre-service teachers of three Indiana technology education teacher preparatory programs were given an internet survey to collect demographic data and determine what factors influence current pre-service teachers. The results of this study were compared to the results from a study done by Harris (2007). The findings resulted in similar factors that were the most common identified as being influential. Those factors included personal interest or hobbies, high school or middle school teacher, and past experiences in …

Beyond Jee: Finding Publication Venues To Get Your Message To The ‘Right’ Audience, Amy S. Van Epps

Libraries Faculty and Staff Scholarship and Research

Very few publications exist outlining the different publishing opportunities within engineering education as a discipline. Most researchers think immediately of the Journal of Engineering Education (JEE), and as the primary publication associated with the American Society for Engineering Education it is a logical first thought.

Questions arise with new graduate students and young faculty who are trying to learn the scope of engineering education as a research discipline and need to identify possible publication venues. A broad list of publications has been generated and is maintained by the ASEE Student Division in cooperation with the Center for Engineering Learning and …

Educating For Evidence Based Decisions In Engineering: The View As Librarian And Instructor, Amy S. Van Epps

Libraries Faculty and Staff Scholarship and Research

The First Year Engineering program at Purdue University is regularly reviewed and revised to adapt to the needs of the students, feedback from teaching faculty, and the changing needs of the university curriculum. In the last year, a unifying theme was added to the class to help tie all the different activities together. That theme was “evidence based decision making in engineering”, a perfect fit for introducing and discussing information literacy many times throughout the semester, rather than in a single, isolated session.

As instructor for one section of the class, the author identifies benefits to including this message throughout …

Cleerhub.Org Adoption By Eafit University Engineering Faculty Members: A Longitudinal Study, Diego M. Mendez Mena

Purdue Polytechnic Masters Theses

The main purpose of this study is to identify and comprehend faculty members’ perception of attributes of the diffusion of the technological innovation CLEERhub.org at EAFIT University, College of Engineering, in Medellin, Colombia. Moreover, this work attempts to understand causes and motivators that might lead to innovation adoption or rejection. The Diffusion of Innovations Theory serves as the framework to develop an appropriate assessing instrument that allows accurate measuring of user opinions towards the practice of CLEERhub.org in their educational research work in Engineering. In order to correctly assess user perception of the embracement process of such technological/cyberinfrastructure innovation, the …

Engineering Childhood: Knowledge Transmission Through Parenting, Brianna L. Dorie, Monica Cardella

School of Engineering Education Graduate Student Series

Parents are the front line when it comes to the education and development of their children, and are important agents in the educational achievement of their child in a formal setting (Yun et al, 2010; Catsambis, 1995; Fan & Chen, 2001; Seyfried & Chung,2003). Parents purchase toys, read books, take children to museums, and interact with their child on a daily basis. Particular background with a subject, such as science or engineering, can affect the parent’s strategies for educating their children and subsequent understanding of main concepts (Yun et al., 2010). However, many adults and children alike have a minimal …

Reliability Of The Global Real-Time Assessment Tool For Teaching Enhancement (G-Rate), Nikitha Sambamurthy, Jeremi Shavonda London, Jeeyeon Hahn, Jiabin Zhu, Monica F. Cox

School of Engineering Education Graduate Student Series

In response to the need for research-based assessment tools for effective teaching and to provide feedback to graduate teaching assistants about their instructional interactions in a classroom, the Global Real-time Assessment Tool for Teaching Enhancement (G-RATE) has been developed.The G-RATE has a flexible and easy-to-use interface that allows use in lecture and laboratory environments to collect data from a variety of stakeholders, including undergraduate students,instructors, researchers, and administrators.This paper presents a brief overview of the revised version of the Observer function of the G-RATE (Cox, Hahn, McNeill, Cekic, Zhu, & London, 2011) (Figure 1), which collects real-time classroom data framed …

Microcontrollers For Mechanical Engineers: From Assembly Language To Controller Implementation, Noah Salzman, Peter H. Meckl

School of Engineering Education Graduate Student Series

This paper describes the evolution of a graduate and advanced undergraduate mechanical engineering course on microcontrollers and electromechanical control systems. The course begins with developing an understanding of the architecture of the microcontroller, and low-level programming in assembly language. It then proceeds to working with various functions of the microcontroller, including serial communications, interrupts, analog to digital conversion, and digital to analog conversion. Finally, the students learn how to characterize first and second order systems, and develop and implement their own controllers for a variety of electromechanical systems. The course takes the uncommon approach of teaching assembly language programming to …

Assessing Student Design Work In Social Entrepreneurship Projects, Lindsey Anne Nelson

School of Engineering Education Graduate Student Series

Helping People Living in Poverty? Understanding Factors Motivating Social Entrepreneurship Abstract Increasingly, engineering educators look to increase the social relevance of engineering design activities. The emergence of social businesses has sparked interest in creating programs that teach engineers about social entrepreneurship. Social businesses are viable business ventures where businesses adopt a social mission. Some strategists view social businesses as ways to capture market share in countries that have a large emerging consumer class, such as India and Brazil. These strategists speak of finding “the fortune at the Bottom of the Pyramid” and target consumers earning less than 4USD/day. Other strategists …

Using Puppets To Elicit Talk During Interviews On Engineering With Young Children, Brianna L. Dorie, Zdanna Tranby, Scott K. Van Cleave, Monica Cardella, Gina Navoa Svarovsky

School of Engineering Education Graduate Student Series

Interviewing can be tricky at best, but with a younger audience (< 5 years) there are some additional barriers that inhibit the interview process such as shyness, short attention span,lack of vocabulary, and level of parental guidance (Clark, 1999). When in an interview, a child may try to ‘second guess’ what the researcher wants them to say, especially if they believe that the interviewer may already know the answer (Gallop, 2000). Additionally young children tend to give monosyllabic answers to open ended questions (Tizard &Hughes, 1984), and might require more prompting than adults.One aide that has been recently investigated is the use of puppets to elicit children’s talk for research (Epstein et al., 2008). Puppets have been shown to: • Decrease children’s fears of the interview process • Lower anxiety levels • Help assess children’s knowledge • Help children to adjust to environment • Provide effective communication and teaching tools. Most research focuses on puppets within clinical contexts, but recently the use has been extended towards other applications such as qualitative interviews (Epstein et al., 2008),mathematical lessons (Cauley, 1988), promoting science engagement (Naylor et al,2007), and teaching phonics (Johnston & Watson, ???). However, there has not been any documented use of this research approach within engineering education.There are three common interview techniques involving puppets in practice: the Alien Puppet Interview (API) (Krott and Nicoladis, 2005), the Puppet Interview (PI) (Cassidy,1988; Verschueren, Buyuk and Marcoen, 2001) and the Berkeley Puppet Interview (BPI) (Measelle et al., 1998; Ablow et al., 1999). Each technique has a different strategy depending on how the child interacts with the puppet.As part of a larger project, children ages 3-5 were interviewed about an engineering task that they had just completed with their parents during a museum event. The interview was a hybrid mix of the Alien Puppet Interview and the Puppet Interview, depending on the way in which the child interviewee chose to interact with the puppet. Thirty interviews were analyzed for children’s interaction, quality of answers, and behavior toward the puppet.In the paper, we will provide more details about the specific interview approach used for our study (as well as insights into how children responded to this interview approach) in addition to a larger discussion of the three interview techniques in order to provide a research methodology resource for other pre-college engineering education researchers to use.

Making The Most Of Site Visits, Lindsey Anne Nelson

School of Engineering Education Graduate Student Series

In order to engage communities, engineering educators must build networks with diverse community organizations. These community organizations primarily act as clients for student design teams. Engineering students are expected to treat clients with respect while developing solutions that solve a real problem found in the community organization. However, engineering students might not view people within the community organization as crucial stakeholders who have valuable information. The purpose of this paper is to explore how engineering students seek information during site visits to community partners.This paper analyzes students in a simulation activity to observe how students interact with different kinds of …

The Dynamics Of Attracting Switchers: A Cross-Disciplinary Comparison, Corey T. Schimpf, George Dante Ricco, Matthew Ohland

School of Engineering Education Graduate Student Series

A Hazards Model Study of Pathway Analysis in Engineering Factors that indicate, explain, or predict if a student will persist or exit an engineering degree have been a subject of a lot of research in engineering education. Findings from these studies identify factors that lead to success or barriers that lead premature exit from an engineering degree; however, they often focus on students who matriculate into engineering or analyze students once they have matriculated into engineering. We propose studying an alternate pathway, students who switch into engineering from other majors. Examining alternate pathways may yield a fuller picture of the …

Theoretical Foundations For Effective Stem Learning Environments, Aran W. Glancy, Tamara J. Moore

School of Engineering Education Working Papers

No abstract provided.

Is Adding The E Enough?: Investigating The Impact Of K-12 Engineering Standards On The Implementation Of Stem Integration., Gillian H. Roehrig, Tamara J. Moore, Hui-Hui Wang, Mi Sun Park

School of Engineering Education Faculty Publications

The problems that we face in our ever-changing, increasingly global society are multidisciplinary, and many require the integration of multiple science, technology, engineering, and mathematics (STEM) concepts to solve them. National calls for improvement of STEM education in the United States are driving changes in policy, particularly in academic standards. Research on STEM integration in K-12 classrooms has not kept pace with the sweeping policy changes in STEM education. This study addresses the need for research to explore the translation of broad, national-level policy statements regarding STEM education and integration to state-level policies and implementation in K-12 classrooms. An interpretive …

Sectionality Or Why Section Determines Grades: An Exploration Of Engineering Core Course Section Grades Using A Hierarchical Linear Model And The Multiple-Institution Database For Investigating Engineering Longitudinal Development, George Dante Ricco, Noah Salzman, Russell A. Long, Matthew Ohland

School of Engineering Education Graduate Student Series

No abstract provided.

Low-Ses First-Generation Students’ Decision To Pursue Engineering, Michele L. Strutz, Matthew Ohland

School of Engineering Education Graduate Student Series

The ability of this nation to provide a growing economy, strong health and human services, and a secure and safe nation depends upon a vibrant, creative, and diverse engineering and science workforce” (Blue, et al., 2005, p. 4). To address these global opportunities and challenges, and for the U.S. to remain globally competitive, it is necessary for our engineering workforce to be diverse.Nevertheless, the U.S. cannot claim a diverse engineering workforce, and its engineering student bodies are certainly not diverse despite the legislation and programs put in place to increase racial, gender, and socioeconomic (SES) representation. Programs and resources that …

Exploring Cyberlearning Through A Nsf Lens, Jeremi Shavonda London

School of Engineering Education Graduate Student Series

Phrases like “Let’s Google it” and “Text me” are familiar to the youth of today. Though simple, the phrases speak to a greater reality—the use of computing technology and high-speed communication is ubiquitous. The pervasive use of technology opens up new opportunities for undergraduate STEM education. The NSF Task force on Cyberlearning defines cyberlearning as“the use of networked computing and communications technologies to support learning” (2008,p5). Since the full potential of cyberlearning has not been fully realized in undergraduate education, Program Officers in the Division of Undergraduate Education (DUE) at the National Science Foundation (NSF) are interested in exploring the …

Measuring Undergraduate Student Perceptions Of The Impact Of Project Lead The Way, Noah Salzman, Eric L. Mann, Matthew Ohland

School of Engineering Education Graduate Student Series

A survey was distributed to the entire undergraduate student body at a large public university on students’ experiences in Project Lead The Way, a popular middle school and high school technology and engineering program. The survey included demographic questions including academic major, questions on which PLTW classes the students took in high school, and Likert-type ratings of those experiences.Of the responses to the survey (n=575), slightly fewer than half (n=252) indicated that they had participated in PLTW classes in high school. Approximately half of the respondents were majoring in engineering, one quarter in engineering technology, and the rest were distributed …

Scaffolding Undergraduate Engineering Design Education With The Wellbeing Framework, Lindsey Anne Nelson

School of Engineering Education Graduate Student Series

Increasingly, engineering design educators articulate wanting to embed social sustainability into student projects. Some educators observe that global calls, such as the Grand Challenges of Engineering and the Millennium Development Goals, foster social consciousness while supporting open innovation environments. Using a broad social goal like “poverty alleviation” to frame a course design challenge can help students connect engineering design processes to messages that proclaim engineering as a socially engaged profession [1]. Yet scaffolding student learning in engineering design for poverty alleviation should involve more than a simple directive to create a device for a poor person. The purpose of this …

Knowledge-Enabled Engineering Design: Toward An Integrated Model, Michael Fosmire, David Radcliffe

Libraries Faculty and Staff Scholarship and Research

Librarians and engineering faculty have long understood that design is one of the defining processes of the engineering profession. In an increasingly knowledge-driven society, students need to efficiently locate, assess and integrate relevant information into their design process so that they can develop innovation solutions to emerging complex, global grand challenges. Increasingly, engineering curricula are incorporating design as early as the first year, but a question remains as to how effectively information literacy is being integrated into these early experiences of design. For example, the Engineering Change study found there has been very little improvement to lifelong learning skills in …

A Retrospective Study Of The Elementary School Experiences, Influences, Skills, And Traits Of Talented Engineers, Michele L. Strutz

School of Engineering Education Graduate Student Series

No abstract provided.

Access And Definition: Exploring How Stem Faculty, Department Heads, And University Policy Administrators Navigate The Implementation Of A Parental Leave Policy, Corey T. Schimpf, Marisol Mercado Santiago, Alice L. Pawley

School of Engineering Education Graduate Student Series

Access and Definition: Exploring how STEM Faculty, Department Heads and University Policy Administrators Navigate the Enactment of a Parental Leave Policy A key feature in various reports exploring women’s persisting underrepresentation in STEM faculty positions in the US is the need to disseminate policy information to all stakeholders involved in issues relating to women STEM faculty underrepresentation and retention. Indeed, the National Academies of Science Beyond Barriers and Bias: Fulfilling the Potential of Women Academic Science and Engineering (2007) and the AAUW’s Why so Few?(2010) identify institutional policies, like parental leave, as a way to address an outmoded institutional structure …

Statistical Analysis When The Data Is An Image: Eliciting Student Thinking About Sampling And Variability., Margaret A. Hjalmarson, Tamara J. Moore, Robert Delmas

School of Engineering Education Faculty Publications

Results of analysis of responses to a first-year undergraduate engineering activity are presented. Teams of students were asked to develop a procedure for quantifying the roughness of a surface at the nanoscale, which is typical of problems in Materials Engineering where qualities of a material need to be quantified. Thirty-five teams were selected from a large engineering course for analysis of their responses. The results indicate that engagement in the task naturally led teams to design a sampling plan, use or design measures of center and variability, and integrate those measures into a model to solve the stated problem. Team …

Statistical Analysis When The Data Is An Image: Eliciting Student Thinking About Sampling And Variability, Tamara J. Moore, Margret Hjalmarson, Robert Delmas

School of Engineering Education Faculty Publications

Within statistics education, there is a growing interest in understanding students' application of understanding about variability and sampling given the relative lack of research in either area (Shaughnessy, 2007). The task examined in this paper elicited students' knowledge of these concepts within a small-group problem solving task completed by teams of first-year engineering students. In the Nanoroughness task, teams of students designed a procedure for quantifying the roughness of a material surface using digital images generated by atomic force microscopy. The procedure required students to apply statistical methods in order to aggregate the data. The focus of this article is …

Three Deadly Venoms: Phenomenology, Existentialism, And Philosophical Constructs To Expand Engineering Education Research Methodologies And Philosophy, George Dante Ricco

School of Engineering Education Graduate Student Series

The Engineer through a Multidisciplinary Lens Our work invokes multiple theoretical approaches to the question of the engineer’s perception of his/her place in the field of engineering through lenses within social psychology and modern philosophy. We aim to help augment current conversations on and further dialogue as to what engineering is from ethnomethodological (or existential phenomenological) and symbolic interactionism points of view. The foundation of our work is the current state of engineering and how to address the engineer’s negotiation of his/her state of affairs. We believe this work has strong implications amidst recent publications invoking epistemologies based upon modern …

Person-Thing Orientation As A Predictor Of Engineering Persistence And Success, Ida Ngambeki, Demetra Evangelou Dr, William Graziano, Diana N Bairaktarova, Sara E Branch, Anna Woodcock

School of Engineering Education Graduate Student Series

Interest, especially in the United States, is an important motivation for students in choosing a major and the strength of their commitment to remaining in that major. In the examination of engineering students’ reasons for persistence and success, interest has not received an in-depth treatment. Interest as a motivational factor can be characterized and operationalized in several ways. Engineering is often typified as a discipline that primarily deals with the creation and manipulation of man-made artefacts as opposed to a discipline centered on interpersonal interaction. For this study interest has been characterized along the Person-Thing dimension.This has been operationalized as …

Motivations And Benefits For College Students Serving As Mentors In A High School Robotics Competition, Noah Salzman, Johannes Strobel

School of Engineering Education Graduate Student Series

Many universities provide space for student organizations in which undergraduate students are learning leadership skills, mentor other students and bring their engineering skills to practice.Purdue FIRST Programs (PFP) is a service-learning program where university students mentor predominantly high school student teams participating in the FIRST Robotics Competition (FRC). Whereas most FRC teams are mentored by professional engineers, PFP is unique in both the extent which it relies on student mentors and the overall scope of the organization. Existing models of mentorship do not adequately describe the specific relationship between the college and high schools students: (1) Due to the proximity …

Returning Students In Engineering Education: Making A Case For “Experience Capital”, Michele L. Strutz, James E. Cawthorne Jr, Daniel M. Ferguson, Mark T. Carnes, Matthew Ohland

School of Engineering Education Graduate Student Series

Students returning to college are not generally studied, where most of the research on non-traditional students is focused on individuals returning to earn their undergraduate degree. There are, however, many students returning to receive graduate degrees as they pursue new directions in life by interest or economic necessity. Undergraduate students with experience have clear educational related goals, practical approaches to problem-solving, and high learning motivation.Returning graduate students are expected to model similar behaviors. These individuals bring a lifetime of personal and professional expertise, which we identify as “experience capital.”A review of the literature reveals that capital has been pondered since …