Engineering Education Commons^™

Critical Thinking: Is That Going To Be On Test, E Shirl Donaldson, Anne M. Lucietto

School of Engineering Technology Faculty Publications

The current generation of college students is a result of the “No Child Left Behind Act”. Educators at the university level are seeing the unintended result of high stakes testing in student attitudes towards learning and study. The K– 12 educational system in the US focuses on mastering tests and accruing points in a course, most often “teaching to the test.” These tests are standardized and critical to promotion and later acceptance into college. It is this activity that provides a basis for student perception of how learning and assessment take place. When these students are challenged with higher order …

Writing Proficiency In Engineering Technology Students And Skill Development In The Classroom, Anne M. Lucietto, Nichiole Ramirez

School of Engineering Technology Faculty Publications

Little work has been done to understand the engineering technology student. The work that has been done often incorporates engineering technology students into the larger number of engineering students. This masks information that would be helpful in guiding and working with engineering technology students. While this is important, work to further understand these students, we chose to begin by exploring the writing skills of the engineering technology student, developing on other work done in this area. The work place demands the ability to convey thoughts and concepts; however the academic environment is not consistent in the development of writing proficiency. …

How Professional Society Membership Is Affected By Returning Student Status, Anne M. Lucietto, Diane L. Peters

School of Engineering Technology Faculty Publications

In recent years, several research efforts have aimed to understand the issues surrounding engineering professionals returning to the academic environment for graduate degrees in engineering. This research focuses on a variety of issues: why they return, what they hope to do afterwards, and what their experiences are in the academic environment. While those are important issues, interaction with professional societies while in the workplace and pursuing graduate work are also of concern. Many engineering professionals, both in industry and in academia, value activities with these organizations while advancing in membership levels as they advance through their careers. Advancement may be …

Math, Science, And Engineering Integration In A High School Engineering Course: A Qualitative Study, Clara G. Valtorta, Leema K. Berland

Journal of Pre-College Engineering Education Research (J-PEER)

Engineering in K-12 classrooms has been receiving expanding emphasis in the United States. The integration of science, mathematics, and engineering is a benefit and goal of K-12 engineering; however, current empirical research on the efficacy of K-12 science, mathematics, and engineering integration is limited. This study adds to this growing field, using discourse analysis techniques to examine whether and why students integrate math and science concepts into their engineering design work. The study focuses on student work during a unit from a high school engineering course. Video data were collected during the unit and were used to identify episodes of …

Beyond Blackboards: Engaging Underserved Middle School Students In Engineering, Sarah Blanchard, Justina Judy, Chandra Muller, Richard H. Crawford, Anthony J. Petrosino, Christina K. White, Fu-An Lin, Kristin L. Wood

Journal of Pre-College Engineering Education Research (J-PEER)

Beyond Blackboards is an inquiry-centered, after-school program designed to enhance middle school students’ engagement with engineering through design-based experiences focused on the 21st Century Engineering Challenges. Set within a predominantly lowincome, majority-minority community, our study aims to investigate the impact of Beyond Blackboards on students’ interest in and understanding of engineering, as well as their ability to align their educational and career plans. We compare participants’ and nonparticipants’ questionnaire responses before the implementation and at the end of the program’s first academic year. Statistically significant findings indicate a school-wide increase in students’ interest in engineering careers, supporting a shift in …

Engineering / Faculty / Sapp Nelson / Purdue University / 2015, Megan R. Sapp Nelson

Data Information Literacy Case Study Directory

These materials were developed to assist a cohort of early career engineering education faculty to critically consider aspects of data management that they may implement in their developing research groups. These materials were used in the context of a two hour workshop and one hour brownbag. In the brownbag, the results of the Data Information Literacy research grant were discussed as they may be relevant to the early career faculty. The faculty then completed a self-assessment to identify their weak areas of data management and their personal priorities for data management. The two hour workshop was then conducted to assist …

Difficulty As A Concept Inventory Design Consideration: An Exploratory Study Of The Concept Assessment Tool For Statics (Cats), Dana L. Denick

Open Access Dissertations

The ability for engineering students to apply mathematic, scientific and engineering knowledge to real-life problems depends greatly on developing deep conceptual knowledge that structures and relates the meaning of underlying principles. Concept inventories have emerged as a class of tests typically developed for use in higher education science and engineering courses. Concept Inventories (CIs) are multiple-choice tests that are designed to assess students' conceptual understanding within a specific content domain. For example, the CI explored within this study, the Concept Assessment Tool for Statics (CATS) is intended to measure students' understanding of the concepts underlying the domain of engineering statics. …

Teaching Engineering, Second Edition, Phillip C. Wankat, Frank S. Oreovicz

Purdue University Press Books

The majority of professors have never had a formal course in education, and the most common method for learning how to teach is on-the-job training. This represents a challenge for disciplines with ever more complex subject matter, and a lost opportunity when new active learning approaches to education are yielding dramatic improvements in student learning and retention.

This book aims to cover all aspects of teaching engineering and other technical subjects. It presents both practical matters and educational theories in a format useful for both new and experienced teachers. It is organized to start with specific, practical teaching applications and …

Nanohub.Org: A Gateway To Undergraduate Simulation-Based Research In Materials Science And Related Fields, Tanya A. Faltens, Peter A. Bermel, Amanda Buckles, K Anna Douglas, Alejandro H. Strachan, Lynn K. Zentner, Gerhard Klimeck

Birck and NCN Publications

Our future engineers and scientists will likely be required to use advanced simulations to solve many of tomorrow's challenges in nanotechnology. To prepare students to meet this need, the Network for Computational Nanotechnology (NCN) provides simulation-focused research experiences for undergraduates at an early point in their educational path, to increase the likelihood that they will ultimately complete a doctoral program. The NCN summer research program currently serves over 20 undergraduate students per year who are recruited nationwide, and selected by NCN and the faculty for aptitude in their chosen field within STEM, as well as complementary skills such as coding …

What Do Students Experience As Peer Leaders Of Learning Teams?, Eric C. Johnson, Brett A. Robbins, Michael Loui

School of Engineering Education Faculty Publications

In a course for engineering freshmen, peer leaders facilitated optional study sessions, which implemented peer-led team learning workshops. Some leaders were paid teaching assistants, but most were undergraduate volunteers. To understand the experiences of the peer leaders, we asked them to keep weekly reflective journals. By performing a basic qualitative analysis of fourteen journals from two semesters, we developed a description of the experience of leading peer-led team learning workshops over the course of the semester. At the beginning of the semester, the leaders were apprehensive about teaching and concerned with correctly answering students’ questions. As the semester progressed, the …

First In The Family: A Comparison Of First-Generation And Non-First-Generation Engineering College Students, Dina Verdin, Allison F. Godwin

School of Engineering Education Graduate Student Series

This study investigates first-generation and non-first-generation engineering undergraduates’ math/science identities, subject-related interests, and career plans. First-generation students are an understudied, but growing population. Understanding how these self-beliefs and background factors affect students’ engineering choice can help widen pathways into engineering which continues to be defined as “pale and male.” Additionally, identity has predictive value for practical outcomes like engineering choice in college. The data for this study comes from the nationally representative Sustainability and Gender in Engineering (SaGE) survey completed by 6,772 college students who enrolled in first-year English courses at 2- and 4-year colleges across the U.S. …

An Engineering Tale: Using Storybooks To Analyze Parent–Child Conversations About Engineering (Fundamental), Brianna L. Dorie, Monica Cardella

School of Engineering Education Graduate Student Series

Envisioning a larger workforce of engineers, with broad participation from a diverse set of workers, is one of the central concerns of engineering education research. While many current K-12 programs focus on engineering thinking and design, there is still a need to promote aspiration and understanding of engineering as an occupation, especially in out-of-school environments where children spend a majority of their time. Career aspirations and expectations of children have already started to develop prior to entering formal schooling. Several studies has shown that parents play a significant role in the development of occupational awareness in their children, but the …

Qualitative Study Of First-Generation Latinas: Understanding Motivation For Choosing And Persisting In Engineering, Dina Verdin, Allison F. Godwin, Jennifer Morazes

School of Engineering Education Graduate Student Series

Latina undergraduates pursuing an engineering degree continue to be an underrepresented group at four-year universities. Compared to their male counterparts, fewer women enter the field of engineering; however, of those Latino/as who do matriculate, they have the same likelihood of persisting as their White counterparts. Furthermore, a dearth of underrepresented students such as Latino/as and first-generation college students enter or remain in the field of engineering. The need for increased gender and racial/ethnic representation in engineering is a documented need allowing for the production of a wider range of innovative products that take into consideration different perspectives that represent the …

Engineering Together: Context In Dyadic Talk During An Engineering Task (K-12 Fundamental), Brianna L. Dorie, Monica Cardella, Gina Navoa Svarovsky

School of Engineering Education Graduate Student Series

Exploring how children develop early interest and understanding in engineering canprovide useful information for the ongoing efforts to increase the access of women inengineering careers. Drawing on occupational choice theories, girls and women havetended to place a high value on helping others in their work, but do not often realize thatcareers in engineering can lead to these types of endeavors. Adding layers of socialcontext that highlight the connections between engineering endeavors and improving thelives of others may create a more engaging experience for girls and women, andpotentially lead to increased development of girls’ engineering interest and understanding.Additionally, informal learning environments …

Special Session: Building Intentional Community Partnerships, Julia D. Thompson, Juan C. Lucena, Marybeth Lima, Brent Jesiek

School of Engineering Education Graduate Student Series

Recent growth in community engagement programs in engineering education clearly reveals the importance of understanding partnerships between the engagement programs and the community they work with. However, there has been minimal research and reflection on engineering education partnerships. In this special session, the participants will learn about theoretical frameworks that categorize different types of interactions within partnerships and practical implications on how to structure programs that make the community an integral part of the community engagement experience. The special session will be highly interactive, and will be grounded in the Transactional, Cooperative, and Communal (TCC) Framework that categorizes interactions within …

Development Of Entrepreneurial Attitudes Assessment Instrument For Freshman Students, Todd M. Fernandez, Genisson Sliva Coutinho, Michael D. Wilson, Stephen R. Hoffmann

School of Engineering Education Graduate Student Series

An increasing population of university programs and quantity of curricular content focused on entrepreneurship poses both enormous opportunities for student growth, and numerous practical challenges. Prior work has largely focused on pre-post assessment of student learning, shifts in‘mindset’, activity effectiveness, mapping of student outcomes, and implications of student learning on career success. A baseline of freshman student attitudes towards entrepreneurship,outside of specifically focused entrepreneurial leaning, has significant potential to identify and inform programming in entrepreneurship, as well as general curriculums and pedagogy. An improved understanding of student’s constructive and cognitive influences in entrepreneurial education will serve to better inform the …

Students’ Perceptions Of And Responses To Teaching Assistant And Peer Feedback, Kelsey J. Rodgers, Aladar K. Horvath, Hyunyi Jung, Amanda S. Fry, Heidi Diefes-Dux, Monica E. Cardella

Interdisciplinary Journal of Problem-Based Learning

Authentic open-ended problems are increasingly appearing in university classrooms at all levels. Formative feedback that leads to learning and improved student work products is a challenge, particularly in large enrollment courses. This is a case study of one first-year engineering student team’s experience with teaching assistant and peer feedback during a series of open-ended mathematical modeling problems called Model-Eliciting Activities. The goal of this study was to gain deep insight into the interactions between students, feedback providers, and written feedback by examining one team’s perceptions of the feedback they received and the changes they made to their solutions based on …

Design Practices Of Preservice Elementary Teachers In An Integrated Engineering And Literature Experience, Kristen Bethke Wendell

Journal of Pre-College Engineering Education Research (J-PEER)

The incorporation of engineering practices and core ideas into the Next Generation Science Standards at the elementary school level provides exciting opportunities but also raises important questions about the preparation of new elementary teachers. Both the teacher education and engineering education communities have a limited literature base on the resources that novice elementary teachers bring to learning and teaching engineering. The purpose of this descriptive exploratory research study was to characterize the design practices used by preservice elementary teachers during an integrated engineering and literature experience. Using a modification of the Design Activity Coding Scheme (Atman et al., 2007), we …

High And Low Computer Self-Efficacy Groups And Their Learning Behavior From Self-Regulated Learning Perspective While Engaged In Interactive Learning Modules, Harry B. Santoso, Oenardi Lawanto, Kurt Becker, Ning Fang, Edward M. Reeve

Journal of Pre-College Engineering Education Research (J-PEER)

The purpose of this research was to investigate high school students’ computer self-efficacy (CSE) and learning behavior in a selfregulated learning (SRL) framework while utilizing an interactive learning module. The researcher hypothesizes that CSE is reflected on cognitive actions and metacognitive strategies while the students are engaged with interactive learning modules. Two research questions guided this research: (1) how is students’ CSE while engaged in interactive learning modules? and (2) how do high and low CSE groups plan and monitor their cognitive action, and regulate their monitoring strategies based on their CSE level? The research used a mixedmethods approach to …

Gender Differences In The Consistency Of Middle School Students’ Interest In Engineering And Science Careers, Marsha Ing, Pamela R. Aschbacher, Sherry M. Tsai

Journal of Pre-College Engineering Education Research (J-PEER)

This longitudinal study analyzes survey responses in seventh, eighth, and ninth grade from diverse public school students (n = 482) to explore gender differences in engineering and science career preferences. Females were far more likely to express interest in a science career (31%) than an engineering career (13%), while the reverse was true for males (58% in engineering, 39% in science). After controlling for student and school demographic characteristics, females were as consistent as males in their science career interests during the three years of the study but less consistent in their engineering career interests. Knowing an engineer significantly …

A Qualitative Study Of Problematic Reasonings Of Undergraduate Electrical Engineering Students In Continuous Time Signals And Systems Courses, Farrah Fayyaz

Open Access Dissertations

Continuous Time Signals and Systems is a core course in the undergraduate electrical engineering curriculum. The topics covered in this course are difficult to learn conceptually because a significant number of topics are abstract, disconnected from a student's daily life, and make extensive use of mathematical modeling and formulas. Engineering educators have put in significant effort to design effective educational strategies for this course; however, there remained a gap in qualitative understanding of students' reasonings associated with difficulties in conceptual learning of the course content. This study aims to fill this gap by identifying problematic reasonings of undergraduate electrical engineering …

The Impact Of National Science Foundation Investments In Undergraduate Engineering Education Research: A Comparative, Mixed Methods Study, Jeremi Shavonda London

Open Access Dissertations

The U.S. invests billions of taxpayers' dollars in research tied to the national priorities that contribute to its competitiveness in a global economy. As the federal funding agency with an explicit focus on engineering education, the National Science Foundation (NSF) contains a portfolio of projects focused on improving the quantity of engineering graduates and the quality of engineering programs. Within the agency, the Division of Undergraduate Education invests approximately $190 million (FY 2012) annually on science, technology, engineering and mathematics (STEM) education projects. Although the DUE portfolio includes a suite a projects with different foci supporting national initiatives and Principal …

Visualizing Mechanics: Educational Videos Demonstrating Core Mechanics Concepts, Camilo Schrader, Jeffrey Rhoads, Charles M. Krousgrill, Stephen Alex Stamm, Elizabeth Bushman

The Summer Undergraduate Research Fellowship (SURF) Symposium

There has been an increased interest in using technology to relay information over the past 20 years. This interest has been reflected in the way the internet has expanded to incorporate nearly-uncountable numbers of blogs, streaming videos, and discussion forums. Recent research has shown that younger generations of students prefer internet-based platforms such as these to communicate and learn, as they are congruent with a visual style of learning. The present study seeks to fuse the predominantly reflective and intuitive methods found in a traditional lecture with the more visual and active modes of learning to provide a larger range …

Chronological And Pedagogical Analysis Of Global Real-Time Assessment Tool For Teaching Enhancement (G-Rate), Syafiah Mahfuzah Johari, Monica Cox, Nikitha Sambamurthy

The Summer Undergraduate Research Fellowship (SURF) Symposium

The Global Real-Time Assessment Tool for Teaching Enhancement (G-RATE) serves as a pedagogical feedback tool to assess teaching performance in learning environments. This tool is developed based on How People Learn (HPL) framework, which specifically identifies four dimensions which are essential elements of an effective learning environment which are community-centeredness, learner-centeredness, assessment-centeredness and knowledge-centeredness. However, there are no succinct and meaningful representations for frequency and chronological observational data and no interpretation has been made from the collected observation data so far. This study addresses two different methods to observe the patterns from the observation data. First, observation data is compared …

Investigating Attitudes Toward Diversity Among Engineering And Management Students, Xiuli Wang, Brent K. Jesiek, Qin Zhu

The Summer Undergraduate Research Fellowship (SURF) Symposium

As the world becomes increasingly globalized, students and professionals face growing challenges related to working across national and cultural boundaries. A related concern for today’s educators and researchers is a lack of effective assessment tools to measure global competency among students in engineering, management, and other professional fields. To begin addressing this gap, two previously validated measures of personal attitudes and perceptions toward diversity were administered to students in multiple professional fields, as it was hypothesized that a positive attitude toward diversity is likely one of the major qualities that makes engineers and other professionals perform more sensitively and effectively …

Understanding And Assessing Engineering Practices In Indian Context, Rudie Desravines, Brent Jesiek, Kavitha Ramane, Qin Zhu

The Summer Undergraduate Research Fellowship (SURF) Symposium

For engineers and other technical professionals, working with individuals in a global context is often challenging and requires understanding and openness to other cultures. However, the core of engineering education has historically been focused on mathematical and technical foundations, with a lack of emphasis on broader capabilities such as global competency. Further research is needed to better understand differences in engineering education and practice across national and cultural boundaries, as well as to develop new instructional content and assessment techniques to improve and evaluate the global competency of engineering students and other technical professionals. This project addressed these needs through …

Engineering Leadership Assessment Tool Profile, Karan Sharma, Monique Ross, Monica F. Cox

The Summer Undergraduate Research Fellowship (SURF) Symposium

Numerous studies have been conducted stressing the importance of developing the professional skillset of engineers. This need has been further highlighted by the Engineering Criteria 2000 and by the National Academy of Engineers (Kumar and Hsiao, 2007, p. 19). Having realised the need to develop the professional skillset of engineers such as leadership, interpersonal skills, teamwork and communication, universities have started incorporating methods to hone these skills in their courses. However in today’s competitive world, every practice needs to be assessed and measured for accountability and effectiveness. Engineering education is no exception to this rule. There needs to be a …

Examining Young Students’ Problem Scoping In Engineering Design, Jessica Watkins, Kathleen Spencer, David Hammer

Journal of Pre-College Engineering Education Research (J-PEER)

Problem scoping—determining the nature and boundaries of a problem—is an essential aspect of the engineering design process. Some studies from engineering education suggest that beginning students tend to skip problem scoping or oversimplify a problem. However, the ways these studies often characterize students’ problem scoping often do not reflect the complexity found in experts’ designing and rely on the number of criteria a student mentions or the time spent problem scoping. In this paper, we argue for methodological approaches that take into account not just what students name as criteria, but also how they weigh, balance, and choose between criteria …

High School Student Information Access And Engineering Design Performance, Nathan Mentzer

Journal of Pre-College Engineering Education Research (J-PEER)

Developing solutions to engineering design problems requires access to information. Research has shown that appropriately accessing and using information in the design process improves solution quality. This quasi-experimental study provides two groups of high school students with a design problem in a three hour design experience. One group has access to the internet while the other does not. Quality of design solution was measured and the two groups were compared. Solution quality did not change significantly. Student information requests were categorized and the most commonly requested piece of information related to cost of materials. Students spent substantially more time in …

A Framework For Quality K-12 Engineering Education: Research And Development, Tamara J. Moore, Aran W. Glancy, Kristina M. Tank, Jennifer A. Kersten, Karl A. Smith, Micah S. Stohlmann

Journal of Pre-College Engineering Education Research (J-PEER)

Recent U.S. national documents have laid the foundation for highlighting the connection between science, technology, engineering and mathematics at the K-12 level. However, there is not a clear definition or a well-established tradition of what constitutes a quality engineering education at the K-12 level. The purpose of the current work has been the development of a framework for describing what constitutes a quality K-12 engineering education. The framework presented in this paper is the result of a research project focused on understanding and identifying the ways in which teachers and schools implement engineering and engineering design in their classrooms. The …