Engineering Education Commons^™

Introducing The Engineering Technology Programs To All Incoming Freshmen Engineering And Technology Students–The Result Is Better For All, Gary Crossman, Anthony Dean

Engineering Technology Faculty Publications

The Department of Engineering Technology at Old Dominion University participates in a freshman engineering course sequence, along with four engineering departments in the Batten College of Engineering and Technology. The two course sequence, Exploring Engineering and Technology I and II, involve the five departments in teaching at least one five week module in each of the two courses. Each department generally involves the students in a basic design project related to its discipline. Since the Department of Engineering Technology has three main programs – Civil, Electrical, and Mechanical – it has elected to divide its five week segment into three …

Teaching Lean Manufacturing Concepts Using Physical Simulations Within Engineering Technology Program, Alok Verma

Engineering Technology Faculty Publications

Physical Simulations have a proven record as a teaching tool. Concepts that are often hard to grasp are made easy by the use of physical simulation activities. The constructivism learning theory suggests that people learn better by actively participating in the process of learning. Effectiveness of simulation-based learning is well recognized. According to the Encyclopedia of Educational Technology, "Simulation-based learning involves the placement of a student into a realistic scenario or situation. The student is then responsible for any changes that occur as a result of their decisions." The computer integrated manufacturing course in the mechanical engineering technology program was …

A Hybrid Course In Fundamentals Of Building Construction Using Combination Archived Video And Live Session Distance Learning, Vernon W. Lewis Jr., Carol L. Considine, June Ritchie

Engineering Technology Faculty Publications

A course in the Fundamentals of Building Construction has been a curricular requirement of the Civil Engineering Technology Program (CET) since its inception. This course was taught traditionally as an on-campus class. Over the last ten years, the CET program has expanded to contain an extensive distance learning component, with at least half of the enrollment located off campus. The model for the typical distance-learning class is to meet for three hours, once a week, with a fully interactive (voice) live class. In consideration of the demand of a growing distance learning system, it was decided to restructure this class …

A Comparison Between Frequent Out-Of-Class Assignments And Frequent In-Class Assessments Relative To Student Performance In A Sophomore Level Electrical Circuit Analysis Course, Isaac Flory, Christian Hearn

Engineering Technology Faculty Publications

Two parallel sections of a sophomore level circuit analysis course in Electrical Engineering Technology were structured to provide insight to the marginal utility of out-of-class assignments versus in-class assessments in academic performance. Student distributions for each section, the classroom model, the composition of the common tests and exam, and grading formats are discussed. The data presented and the conditions of the resulting observations indicate the model which favored out-of-class assignments led to improved test scores.

Designing A Microcontroller Training Platform For Active Distance Learning Engineering And Technology Students, Steve C. Hsiung, James E. Eiland, John R. Hackworth, John Ritz

Engineering Technology Faculty Publications

This is an active distance-learning project that addresses the hands-on microprocessor/ mi-crocontroller-related courses. A research team designed a low-cost training system with supporting instructional materials to assist the teaching of these concepts. Individual laboratory activities are being developed to reinforce student learning and skill development in programming concepts. This basic system format eventually will support an array of engineering and technology courses. This project involves two community colleges, Blue Ridge Community College (BRCC) and Olympic College (OC), and a four-year university, Old Dominion University (ODU), in a collaborative research team to design and develop a specific PIC microcontroller training system …

An Assessment And Continuous Improvement Model For Engineering Technology Programs, Alok Verma, Gary Crossman

Engineering Technology Faculty Publications

Assessment and continuous improvement are essential and critical processes for higher education. Development and implementation of such processes are not only required by the Accreditation Board for Engineering and Technology (ABET) but it is also a necessary condition for the maturation and development of any engineering technology program. The assessment and continuous improvement plan discussed here was developed at Old Dominion University (ODU) and implemented during the last accreditation cycle within the Engineering Technology Department. The plan is based on two cycles of assessment and evaluation, a short cycle of one year and a long term cycle of three years. …

Developing A New Program In Marine Engineering Technology, Anthony Dean, Gary Crossman, Alok Verma

Engineering Technology Faculty Publications

The Department of Engineering Technology, in the Batten College of Engineering and Technology at Old Dominion University, in conjunction with members of its advisory board and other industry representatives have begun a sustained effort to promote and develop a strong course of study in Marine Engineering Technology. Located in Norfolk, Virginia, Old Dominion University, and particularly the Department of Engineering Technology, is uniquely positioned to develop such a program. With strong ties to the world's largest Naval Base and superlative shipbuilding, maintenance and repair facilities, early qualitative research indicated high interest for development of such a program in support of …

A New Approach In Microprocessor/Microcontroller Courses/Laboratories Material Design And Development, Steve C. Hsiung, Jeff Willis

Engineering Technology Faculty Publications

Courses in microprocessors and microcontrollers are standard parts of the Engineering Technology core curricula. The traditional course material developments include both lectures and associated laboratory exercises. No matter how creative is the curriculum; it is usually budgetary constraints that confine the creativity when developing new curricula. This limits the freedom of the major approach in new course development.

This article demonstrates new course lecture and laboratories material development that starts from ground up with both a hardware platform and simulation software design for microprocessor/microcontroller related courses. It is not only very cost effective, but also does not limit the instructor's …

Implementation Of Problem-Based Learning In Senior Engineering Design-I (Ece 485w), Fawaz Muzaffer Hussain

Electrical & Computer Engineering Theses & Dissertations

Problem-Based Learning is an approach where knowledge is acquired in the context of the problem. Students are provided with the problem specifications and resources that might prove to be helpful in solving the problem. They attack these real world problems in groups, analogous to the practice in the professional engineering world. This mode of teaching was adopted to deliver the Senior Engineering Design — I course (ECE 485W), offered to freshman engineering undergraduate students in the Electrical and Computer Engineering Department at Old Dominion University, Norfolk. This thesis documents the various pedagogical methods implemented into the course, which were introduced …

Individual Certification As An Engineering Manager?, Rafael Landaeta, Kawintorn Pothanun, William Peterson

Engineering Management & Systems Engineering Faculty Publications

Several of the discipline specific professional societies are offering or planning to offer certification of individuals as engineering managers. Does this have implications for Engineering Management programs at universities? Other stakeholders (faculty, students, employers, and graduates of engineering management programs) are impacted by certification as well. This paper attempts to look at the issue from several points of view. This paper is intended to provoke a dialog on the topic.

Bioengineering Instructional Framework For Technology Education, Philip A. Reed, Technology Education Department, Old Dominion University, Virginia Bioengineering Writing Team

STEMPS Faculty Publications

No abstract provided.

Stem Initiatives: Stimulating Students To Improve Science And Mathematics Achievement, Robert Q. Berry Iii, Philip A. Reed, John M. Ritz, Cheng Y. Lin, Steve Hsiung, Wendy Frazier

STEMPS Faculty Publications

The article focuses on how concepts in science, technology education, and mathematics show powerful relationships when it comes to student learning. Learning theorists believe that, through designed learning environments (contexts) and learning with hands-on projects, new knowledge can not only be learned, but learned in such a way that the knowledge can be transferred for other applications. Scholars in the applied sciences (school science, technology, and mathematics) believe that these subjects have transfer among themselves and that engineering activities can establish the contexts to learn these subjects, plus aid in the transfer of knowledge. This collaborative movement is referred to …

Implementing Simple Protocols In Multiple Processors Control Applications, Steve Hsiung, Tyson Mccall, Corinne Ransberger

Engineering Technology Faculty Publications

Using microprocessor/microcontroller in various control applications is not only one of the major topics in Engineering Technology curricula, but also of interest in industry applications. To accomplish it correctly the process of designing application programs starts from the individual module development through extensive testing, verification, and modification. Applying these developed modules in a useful manner requires the links and integrations that lead to the practical project implementation. Frequently, in students' senior project designs and faculty's research plans, the microprocessor/microcontroller resources become scarce or cause conflicts during the modules' integration stage. To accommodate the shortfall of the resources and resolve any …

A Template Functional-Gage Design Using Parameter-File Table In Autodesk Inventor, Cheng Lin, Moustafa Moustafa

Engineering Technology Faculty Publications

A systematic approach using Autodesk Inventor to design the functional gages of Geometric Dimensioning & Tolerancing (GD&T) is presented. The gages can be used to check straightness, angularity, perpendicularity, parallelism, and position tolerances of a part when geometric tolerances are specified with Maximum Material Condition (MMC). Four steps are proposed to accomplish the task: (1) creation of two-dimensional (2-D) initial template files, (2) generation of hierarchical folders for the template files, (3) creation a 3-D gage model from a specific template file, and (4) dimensioning and generation of the gage drawing. Results show that, by following this approach, students can …

The Administration Of Senior Design Projects In A Distance Learning Environment, Isaac L. Flory Iv, John R. Hackworth

Engineering Technology Faculty Publications

A method for administering a senior level capstone design course in Electrical Engineering Technology in a distance learning environment is described. Several avenues are explored that help the students successfully conceive, develop, and present their design projects from off- campus locations that are consistent with the requirements placed upon their on-campus peers. Several problems that are unique to offering a senior project course in a distance learning environment are explored and solutions are described.

Physical Simulations In Classroom As A Pedagogical Tool For Enhancing Manufacturing Instruction In Engineering Technology Programs, Alok K. Verma, Han P. Bao, Anand Ghadmode, Swanand Dhayagude

Engineering Technology Faculty Publications

Lean is a powerful philosophy that advocates minimization of waste within an organization. The adoption of Lean Manufacturing philosophy by major manufacturers has created a demand for qualified personnel in this area. Higher education is not far behind in incorporating this philosophy into their curriculum. A number of universities have started offering both graduate and undergraduate courses in Lean Manufacturing. Physical simulations are often an integral part of these courses. Simulation based Lean enterprise concepts have been introduced in an undergraduate course in mechanical engineering technology program at Old Dominion University. Results show increased student participation and better understanding of …

Lessons Learned And Best Practices For Using An Analytic Strategy Approach For The Creation Of Virtual Laboratories For Distance Learning In Engineering Technology, Anthony W. Dean, Carol L. Considine, Gary R. Crossman

Engineering Technology Faculty Publications

This paper describes the use of an Analytic Strategy Approach used in the development of a Virtual Automation and Controls Lab in the Mechanical Engineering Technology Program of the Engineering Technology Department at Old Dominion University. This paper looks at the three phases, as applied to the development of a virtual lab using an analytic strategy design:

(1) Formulation of the quantitative and qualitative approach to assist in decision process,

(2) Quantitative and qualitative analysis of the decision alternatives - within the decision context,

(3) Interpretation of the analysis results and implications for decision.

Privatization Initiatives: A Source For Engineering Economy Case Studies, Paul Kauffmann, Tarek Abdel-Salam, Keith Williamson, Carol L. Considine

Engineering Technology Faculty Publications

A case study method which reviews the basic structure of the circular A-76 privatization decision model is discussed. It highlights the possibilities for development of case studies that can challenge student teams to apply engineering economy tools while developing skills in a range of circular areas that are important to undergraduate engineering education and career success in engineering practice. Beyond building quantitative and qualitative business analysis skills, engineering economy cases can enhance student skills in other topical areas such as technical presentations, and report writing. The privatization initiatives and related decision models can also enhance human relations oriented skills in …

Mapping Of Thermo-Fluids Laboratory Experiments Into Web-Based Experiments, Sushil Chaturvedi, Rick Mckenzie, O. A. Akan, A. Priyadershini

Mechanical & Aerospace Engineering Faculty Publications

A methodology is being developed for transforming physical experiments from the undergraduate thermo-fluids laboratory into a web-based virtual experiments. Important characteristics of physical experiments are identified in order to preserve them in physical to virtual domain mapping. Several commercially available software are employed to incorporate in the web-based experiments characteristics such as recreation of physical phenomenon in the virtual domain, measurement of physical quantities on a computer screen, assembly of virtual probes and coupling of the virtual experiment with a data acquisition software. A virtual reality software has been incorporated to enable web-based students to navigate through the virtual laboratory, …

Design Optimization Module For Hierarchical Research And Learning Environment, Oktay Baysal, Mehti Koklu, Ahmed K. Noor

Mechanical & Aerospace Engineering Faculty Publications

The present paper describes a learning module on design optimization courses within a hierarchical research and learning network (HRLN). In this environment a knowledge organization can be created as a hierarchical learning network to link diverse inter- and trans- disciplinary teams from a consortium of universities, industry, government agencies and the providers of learning technologies. It is an approach that builds on computer-based training, intelligent tutoring systems, interactive learning, collaborative-distributed learning, and learning networks. The present design optimization module has been developed and described herein, as a demonstrator of a learning module in this environment. This module allows for the …

Project-Based Freshmen Engineering Courses In Civil Engineering Technology, Vernon W. Lewis Jr., Carol L. Considine

Engineering Technology Faculty Publications

Old Dominion University (ODU) has developed two fundamental courses for freshmen engineering students. The first course introduces the fundamentals of the practice of engineering including innovation, creativity, design and manufacturing, commercialization, teaming skills, environmental impact, and ethics. The second course is an exploration of engineering and engineering technology disciplines with an emphasis on projects. The purpose of these courses is to engage the students in the application of engineering early in their course of study with the hope that their interest will be reinforced and the likelihood of their being retained as students will increase. The courses are divided into …

Promoting Faculty Development With Asee/Nasa Fellowship Programs- Parametric Study Of Laser Beam Cutting (Lbc) Processes- A Case Study, Alok K. Verma, Gary R. Crossman, Carl J. Voglewede, Thomas J. Burns

Engineering Technology Faculty Publications

American Society for Engineering Education (ASEE) and National Aeronautics and Space Administration (NASA) offer a joint program for faculty and research development. This program known as ASEE/NASA Faculty Fellowship program offers opportunities for professional development for Engineering Technology faculty. This paper discusses one such experience involving applied research at NASA Langley Research Center, which resulted in professional development of the faculty member while enhancing the undergraduate curriculum in Engineering Technology.

Enhancing Met Curriculum With Applied Research Experience For Faculty Parametric Study Of Water Jet Cutting Processes- A Case Study, Alok K. Verma, Cheng Y. Lin, Carl J. Voglewede, Mike E. Tall

Engineering Technology Faculty Publications

In today's global competitive environment, the engineering technology curriculum must adopt and reflect the changing needs of industry. This can happen only if the faculty are aware of the current trends in industry and are actively involved with industry and research projects. ASEE/NASA Faculty Fellowship program offers opportunities for professional development for Engineering Technology faculty. A parametric study of water jet cutting (WJC) process was done under the ASEE / NASA faculty fellowship program at NASA Langley Research Center. This research experience has been used to enhance undergraduate curriculum in Mechanical Engineering Technology at Old Dominion University (ODU).

Design And Analysis Of An Air Filter Sensor For A Residential Heating And Cooling System, Cheng Y. Lin, Steve C. Hsiung, Alok K. Verma, Gary R. Crossman

Engineering Technology Faculty Publications

This is a design project of an air-filter sensor to be used in home heating and cooling system. The project includes conceptual design, analysis, implementation, tests and modifications. First, the air quality and power consumption between a clean air filter and a dirty air filter is studied. Then, a photo sensor circuit with an ultra high brightness LED emitter and a phototransistor receiver is used to detect dust particles. A red warning LED lights up when a specified amount of dust is collected on the filter and blocks the light beam between the emitter and the receiver. The emitter and …

Design, Development, And Delivery Of Certificate Programs For Funding Opportunities And Industry Collaboration, Carol Considine, Paul Kauffmann

Engineering Technology Faculty Publications

Many engineering technology departments have four general areas that are used for evaluation of tenure and promotion. These areas include teaching, research and scholarly activities, service, and other professional activities. Although teaching is the primary mission in most engineering technology programs, external funding as part of the research area is playing a larger role in tenure decisions at many universities. Many faculty members in engineering technology programs come from an industrial background and do not have a specific research area of interest and contacts within the research community. These faculty members must look at other avenues to develop the external …

An Integration Of Pc Hardware & Software In Teaching Engineering Technology Courses, Steve Hsiung, Richard Jones

Engineering Technology Faculty Publications

As technology advances, the price of a PC drops dramatically. This trend has resulted in PCs that are complex, powerful, and very affordable. Today's PC is a popular and essential tool in teaching software programming course(s) in C, C++, Visual Basic, or Java, running commercial software supporting courses in circuit simulation/design or circuit board layout, and acting as a workstation to gain access to the Internet or LAN networks. In most Engineering Technology curricula there is a limited amount of linkage between those PC applications. The actual effort to merge the hard-gained knowledge of hardware & software concepts together through …

Automation Laboratory Development With Design Implementation Scheme And Simulation Software, Cheng Y. Lin, Gary R. Crossman

Engineering Technology Faculty Publications

This paper describes the development of the Automation Control Lab in the Mechanical Engineering Technology Program of the Engineering Technology Department at Old Dominion University. The reorganization goal of the development is to help students design, test, and implement their automation designs effectively. Three processes are adopted to achieve this goal: (1) floor-plan design and inventory control of the components, (2) using Automation Studio to dynamically check each design, and (3) using industrial Programmable Logic Controllers (PLC) controllers to download PLC programs.

Assessment Methods For Comparison Of On-Camps And Distance Learning Laboratory Courses In An Engineering Technology Program, John R. Hackworth, Richard L. Jones

Engineering Technology Faculty Publications

Assessment methodology and results for two Electrical Engineering Technology laboratory courses are shown. In these cases, courses are offered in both the traditional on- campus and non-traditional distance learning format, assessment methods are prescribed, assessment data are taken, and the results compiled and compared. Student comments are included which also support the assessment data. In addition, this paper describes ways in which the laboratory courses are structured in order to make the assessment process easier to manage. Pedagogical issues are addressed that were encountered when constructing the distance learning laboratory courses to assure that the learning experience could equal or …

Enhancing Instruction In Lean Manufacturing Through Development Of Simulation Activities In Shipbuilding Operations, Alok K. Verma, James Hughes, Scott Christman

Engineering Technology Faculty Publications

Lean Manufacturing is a powerful philosophy that advocates minimization of waste within an organization. The adoption of Lean Manufacturing philosophy by major manufacturers has created a demand for qualified personnel in this area. A training program in Lean Enterprise was developed by Old Dominion University for the Apprentice School at Northrop Grumman Newport News. Physical simulation activities are an integral part of this training program. Simulation activities related to shipbuilding operations have been incorporated in the Lean training course. These activities have been used in the Business Operations course for three semesters. Results show increased student participation and better understanding …

An Air-Filter Sensor For Home-Used Air Conditioners, Cheng Y. Lin, Gary R. Crossman, Alok K. Verma

Engineering Technology Faculty Publications

This paper presents a successful senior project of instrumentation developed in a Mechanical Engineering Technology senior capstone course. Students were encouraged to approach the problem of designing an air-filter sensor and to propose an optimum and practical solution for the problem. Work includes conceptual design and analysis, implementation, tests and modifications. When an air filter is used in a home air conditioner, inhabitants often forget when to replace it until the cooling or heating capacity is obviously reduced. If the filter remains in service, the efficiency of the cooling/heating system will continue decreasing while the electricity bill will significantly increase. …