Engineering Education Commons^™

Comparative Analysis Of Research Priorities For Technology Education, Gene Martin, John Ritz

STEMPS Faculty Publications

This study compares and contrasts the most relevant research priorities identified through two Delphi studies by the authors. The panels of experts used in these studies, an international and a U.S. study group, were asked to identify important topics to guide future research studies for the school subject of technology education. Both panels sought to determine the most relevant issues that need to be researched related to K-12 technology education and preparation for teaching this school subject. This study reports the similarities of research priorities identified by both expert panels, then contrasts the major differences that the groups identified for …

Integrating Technology And Engineering In A Stem Context, Barry N. Burke, Philip A. Reed, John G. Wells, Robert E. Yager (Ed.), Herbert Brunkhorst (Ed.)

STEMPS Faculty Publications

(First paragraph) Imagine students entering the classroom with an enthusiasm that cannot be contained. They come from all walks of life and with different experiences and backgrounds and are eager to engage in learning. Inspiration and innovation are on their mind. What they learned in their science and math classes is now being applied in another class they take called Technology and Engineering. Opportunity is what they see for their future. Something about connecting all the dots from all their classes propels them to change their outlook, to get involved, to get excited about school and to envision their future.

A Collaborated Process With A Wireless Autonomous Vehicle At It's Center, Thomas B. Stout, Steve C. Hsiung

Engineering Technology Faculty Publications

Developing partnerships between high schools, community colleges and universities is critical for the successful transitions to a lifelong STEM careers. How do you develop these partnerships? The sharing of a technology platform such as autonomous vehicles can bridge the gap by using a common core group of materials. Collaborations between teachers and faculty indifferent schools that share common interests in teaching control systems and robotics technology can be an excellent start. The university as catalyst in the process by designing the curriculum, system hardware and software then through the common interest deploying them in the high schools and community college. …

Enabling Multidisciplinary Perspective In Student Design Project: Fast Fashion And Sustainable Manufacturing Systems, Vukica M. Jovanovic, Manveer Mann, Petros J. Katsioloudis, Daniel L. Dickerson

Engineering Technology Faculty Publications

Fast fashion retailers are growing faster than any other type of retailer due to their ability to offer trendy low-cost clothing mimicking latest runway trends with turnaround times as low as two weeks. Fueled by short production and distribution lead times, fast fashion retailers combine rapid prototyping, small batches of fashionable product designs, and efficient transportations and delivery. Among others, the methods applied in fast-fashion industry include mass customization and personalization, and lean manufacturing. Current trends in manufacturing lean towards the application of digital and rapid manufacturing methods and increased use of product lifecycle management, knowledge management systems and computer …

Dissemination Of Microprocessor Courses Through Classroom And Interactive Cyber-Enabled Technologies, Steve C. Hsiung, John M. Ritz, Ece Yaprak, Thomas B. Stout, Richard L. Jones

Engineering Technology Faculty Publications

The project is in the middle stages of the implementation. There seems to be a positive attitude of learning and using of the training system and curriculum package by all project staffs. Microchip, Inc. and microEngineering Labs, Inc. have donated supplies to support the hardware and software development for this project. The next objectives are team training, recruitment of interested trainees/teachers to participate in training for summers 2014, and assess the effectiveness of the implementations with teachers and students. Photo 2 is the project logo that describes all the concepts of this project.

Bridging The Gap Between Engineering Design And Pk-12 Curriculum Development Through The Use The Stem Education Quality Framework, Margaret Pinnell, James Rowley, Sandi Preiss, Rebecca P. Blust, Rebecca Beach, Suzanne Franco

Mechanical and Aerospace Engineering Faculty Publications

This paper will describe a unique partnership among the Department of Teacher Education and School of Engineering at the University of Dayton (UD) and the Dayton Regional STEM Center (DRSC). This partnership resulted in the development of the STEM Education Quality Framework (SQF), a tool to guide educators in teaching, learning and refining STEM education. The SQF resulted in a variety of educational tools, including a STEM curriculum template, that was implemented in the DRSCs teacher professional development and curriculum development program entitled the STEM Fellow Program. The STEM Fellow program was later modeled in a unique, NSF sponsored six …

Defining Characteristics Of An Integrated Stem Curriculum In K-12 Education, Vinson Robert Carter

Graduate Theses and Dissertations

The purpose of the study was to obtain consensus concerning the defining characteristics of integrated STEM (Science, Technology, Engineering, and Mathematics) curriculum. This study utilized a three round modified Delphi study to solicit recommendations from experts of STEM education in order to: 1) create a set of categorical and defining curricular components needed to develop and implement appropriate integrated STEM curriculum; 2) identify the characteristics that set integrated STEM education curriculum apart from single-discipline curricula; 3) discuss the components necessary to gauge whether an initiative, project, or curriculum should be referred to as integrated STEM education; and 4) examine whether …

An Engineering Design Stem Project: T-Shirt Launcher, Todd D. Fantz, Melva R. Grant

STEMPS Faculty Publications

Technology education has the potential to be the glue for integrating science, technology, engineering, and mathematics (STEM) education through the use of the design process. This should result in increased student interest in science and math, resulting in increased standardized science and math scores (Silk, C. Schunn, & Strand, 2009). In order for this to happen, students need to integrate their grade-level mathematics and science content knowledge in their technology and/or engineering design (Tran & Nathan, 2010). Hopefully, this can be accomplished without losing student interest generated by hands-on, kinesthetic learning. This article provides one example of getting technology education …

Influence Of Stem Education And Technology In Selecting Food And Agriculture Careers, Joan Hegerfeld-Baker

Electronic Theses and Dissertations

Currently market forces identify a growing need for professionals in food safety related careers. The investigation studied influential factors guiding students to choose career paths. Careers connected to the safety of the food supply require professionals with undergraduate and graduate degrees related to science, technology, engineering or math (STEM). Preparing and attracting students to post-secondary institutions needs greater attention to meet the demands of the food and agriculture industry. The investigation focused on college students and high school teachers. Students in three colleges (Arts and Sciences, Agriculture and Biological Sciences, and Education and Human Sciences) offering STEM and non-STEM majors …

Product Lifecycle Management: Measuring What Is Important - Product Lifecycle Implementation Maturity Model, Abram Walton, Cynthia Tomovic, Michael Grieves

STEMPS Faculty Publications

Industry reports that benefits of PLM are difficult to assess because the same benefit can be expressed as a function of time, cost, quality, or any combination. Based on a review of the PLM literature in an earlier study, a PLM Process Model and an initial list of PLM related metrics was generated and later confirmed through interviews with experienced PLM users. In the current study, the original PLM Process Model was refined and the list of metrics was subjected to an exploratory factor analysis in which specific metrics were found to be related to one of four factors: Inputs, …

Theoretical Foundations For Effective Stem Learning Environments, Aran W. Glancy, Tamara J. Moore

School of Engineering Education Working Papers

No abstract provided.

Engineering Innovation And Design For Stem Teachers And The Stem Quality Framework, James Rowley, Sandi Preiss, Margaret Pinnell, Suzanne Franco

Mechanical and Aerospace Engineering Faculty Publications

The backbone of economic growth in the United States relies on engineering innovation. However, engineering innovation cannot occur without engineers and scientists. Unfortunately however, many K-12 students do not have a good understanding of the engineering design process or the vast field of engineering. As a result, many students lose interest in math and science and do not pursue Science, Technology, Engineering and Math (STEM) fields. This paper will describe a unique partnership among the Teacher Education Program and School of Engineering at the University of Dayton (UD) and the Dayton Regional STEM Center (DRSC). This partnership initiated with the …

Connecting Science With Engineering: Using Inquiry And Design In A Teacher Professional Development Course, Louis S. Nadelson, Patricia Pyke, Janet Callahan, Anne Hay, Joshua Pfiester, Mark A. Emmet

Curriculum, Instruction, and Foundational Studies Faculty Publications and Presentations

The engineering design process has evolved over time to be the central and effective framework that engineers use to conduct their work. Logically, K-12 STEM professional development efforts have then attempted to incorporate the design process into their work. There has been little in the STEM literature, though, of the explicit measurement of the growth in design process knowledge. Our study presents findings of significant improvements in knowledge of the design process that resulted over the course of a recent summer STEM institute and professional development program among K-5 teachers.

As more emphasis is placed on integrating STEM into the …

Evaluation Of Senior Project Group Processes Against Cmmi Standards, Jonathan Winstead

Honors Capstone Projects and Theses

No abstract provided.

Improve Or Perish, Revisited -- Again, Johnny J. Moye, Petros J. Katsioloudis

STEMPS Faculty Publications

The article reviews the articles "A Major Problem in Education: Improve or Perish," by M. Ray Karnes and "Improve or Perish-Revisited," by John V. Gallagher.

A Comparison Of Two Engineering Outreach Programs For Adolescents, Louis S. Nadelson, Janet M. Callahan

Materials Science and Engineering Faculty Publications and Presentations

There is continued growth and development of outreach programs designed to increase pre-college students’ awareness and understanding of engineering as a profession and as a career. These outreach programs vary in format and in the groups targeted for participation but maintain the same fundamental goal of increasing participant knowledge of engineering. Many of these outreach programs also maintain the implicit goal of increasing the participants' knowledge and attitudes toward college. The additional resources and funding that are commonly allocated to support outreach programs frequently involve documenting accountability which motivates evaluation of program impact. Therefore, many outreach events include program evaluation …

Promoting Stem Education Via The Design And Fabrication Of A Simulated Lunar Vehicle, Henrique Casagrande

Von Braun Symposium Student Posters

No abstract provided.

Ahhhhhhh! Earthquake!, Jarred Green, Eugene Lasarge, Brittany Marcott, Maigan Matthias, Matthew Watts

Von Braun Symposium Student Posters

No abstract provided.

Teaching Inquiry-Based Stem In The Elementary Grades Using Manipulatives: A Systemic Solution Report, Louis S. Nadelson, Anne Hay, Pat Pyke, Janet Callahan, Cheryl Schrader

Curriculum, Instruction, and Foundational Studies Faculty Publications and Presentations

Young learners come to school holding myriad conceptions about how the world works, particularly in the areas of science, technology, engineering, and mathematics, or STEM.^1-3 Further, young students' conceptions are commonly based on fragmented knowledge or naïve perspectives that contribute to the importance of early exposure to and practice with scrutinizing situations scientifically.^1,3 An important part of helping children gain the skills necessary to approach situations scientifically involves preparing them to conduct scientific inquiry.³ The development of critical thinking skills and scientific approaches to problem solving should begin early in education.⁴ However, lack of elementary …

Gains In Knowledge And Perception Of Engineering After Participation In An Engineering Design Web-Experience Are Gender-Dependent, Kimberly Edginton Bigelow, Gail Wheatley, David Tomasko

Mechanical and Aerospace Engineering Faculty Publications

Web-based activities have the potential to teach engineering in both formal and informal science education settings, maximizing outreach efforts. To date, many activities available on the internet teach about engineering, but few allow students to truly “do” engineering.

This project utilized web animation and interaction in the design of a web-based experience focused on engineering design. In this activity, targeted toward middle school students, users played the role of engineer and engaged in the process of designing a cell phone for the older adult market. It was hoped that this web-based activity would increase participant understanding of what engineering is …

Research In Technology Education, Philip A. Reed (Editor), James E. Laporte (Editor)

STEMPS Faculty Books

Due to the laboratory-based nature of technology and engineering education programs, professionals in our field have often focused on the resources in our classrooms and laboratories and the instructional methodologies used to address specific concepts. Formal research into content and practice has often given way to “what seems right”. New curriculum is constantly being introduced (based on what is occurring in business and industry), yet the inclusion for those evolving concepts in courses and programs is typically not verified.

Hence, the importance of the 2010 CTTE yearbook and its focus on the dire need for an aggressive research agenda in …

A Systemic Solution: Elementary Teacher Preparation In Stem Expertise And Engineering Awareness, Louis S. Nadelson, Janet Callahan, Pat Pyke, Anne Hay, Cheryl Schrader

Curriculum, Instruction, and Foundational Studies Faculty Publications and Presentations

Research shows that most K-5 teachers are typically required to complete only minimal coursework in science and mathematics, which constrains their knowledge, efficacy, and confidence for teaching STEM (Science, Technology, Engineering and Math) content. Additionally, elementary teachers, like much of the general public, have limited comprehension about the relationship between STEM concepts and engineering fields and the kind of work and societal contributions made by engineers. Yet, elementary school is a critical time in which students develop foundational understanding of STEM concepts, career options, and inquiry learning.

To address students' STEM needs and limited teacher preparation, the Idaho SySTEMic Solution …

Enhancing Precalculus Curricula With E-Learning: Implementation And Assessment, Janet Callahan, Seung Youn Chyung, Joanna Guild, William Clement, Joe Guarino, Doug Bullock, Cheryl Schrader

Materials Science and Engineering Faculty Publications and Presentations

During Fall semester of 2007, a semester-long, quasi-experimental study was conducted at Boise State University to investigate the effectiveness of a systematically sequenced and managed, self-paced e-learning activity on improving students’ academic performance and motivation. A total of 125 students enrolled in 3 different sections of a Precalculus class participated in the study. The e-learning activity was implemented in 2 of the 3 sections as a required homework assignment. Students enrolled in one of the 2 selected sections were all engineering majors. The 3^rd section was a control group that did not use the e-learning activity. A pre-test, measuring …

Review Of The American Society For Engineering Education (Asee) Global Colloquium, Cape Town, South Africa, Philip A. Reed

STEMPS Faculty Publications

The following report addresses topics established by the Technical Foundation of America prior to attending the ASEE Global Colloquium October 19-24, 2008 in Cape Town South Africa. Specifically, this manuscript will address what the international engineering education community and the technology education community might have to offer each other. Responses appear below each of the three categories: impacts on curriculum, professional development, and collaboration.

Bioengineering Instructional Framework For Technology Education, Philip A. Reed, Technology Education Department, Old Dominion University, Virginia Bioengineering Writing Team

STEMPS Faculty Publications

No abstract provided.

Stem Initiatives: Stimulating Students To Improve Science And Mathematics Achievement, Robert Q. Berry Iii, Philip A. Reed, John M. Ritz, Cheng Y. Lin, Steve Hsiung, Wendy Frazier

STEMPS Faculty Publications

The article focuses on how concepts in science, technology education, and mathematics show powerful relationships when it comes to student learning. Learning theorists believe that, through designed learning environments (contexts) and learning with hands-on projects, new knowledge can not only be learned, but learned in such a way that the knowledge can be transferred for other applications. Scholars in the applied sciences (school science, technology, and mathematics) believe that these subjects have transfer among themselves and that engineering activities can establish the contexts to learn these subjects, plus aid in the transfer of knowledge. This collaborative movement is referred to …

Teaching Engineering Courses With Workbooks, Yaşar Demirel

Department of Chemical and Biomolecular Engineering: News Releases

Society expects that a modem college education will turn out students who are analytical. intellectually curious, culturally aware, employable, and capable of leadership. Some important skills needed for all degree programs are problem solving, communication (written and oral), team or group work, learning and information processing, and technology. Instructors feel rewarded and satisfied when they sense that they have made a difference in the life of a student.

A Matlab-Based Upper Division Systems Analysis Course For Engineering Technology, William D. Stanley, Paul L. Kauffmann, Gary R. Crossman

Engineering Technology Faculty Publications

The Department of Engineering Technology at Old Dominion University offers TAC of ABET accredited baccalaureate programs in Civil Engineering Technology, Electrical Engineering Technology, and Mechanical Engineering Technology. All students are required to take traditional courses in algebra and trigonometry, as well as differential and integral calculus, at the freshman and sophomore levels. While these courses provided the necessary basic mathematical skills, it was difficult to justify the traditional upper-division mathematics courses such as differential equations, vector analysis, etc., as appropriate for the special needs of engineering technology students.

To address this issue, the Department has undertaken the development of a …

The Reasons Why Many African-American And Hispanic Women Do Not Choose Careers In Technology, Kathryn Elizabeth Guzman

Graduate Research Papers

There have been numerous statistics showing that minorities including women, African-Americans, Hispanics, and Native Americans, are least likely to choose careers in the science and technology field. Along with those studies have been possible reasons why they choose not to enter into the field. Reasons have ranged from lack of encouragement to people just telling them flat out that there is no possible way that they can succeed in the field.

This study found that African-American and Hispanic women do not choose careers in technology for many of the same reasons. As young children, some factors are the way teachers …

Art, Science, Or Trade, Robert A. Green

Journal of the Arkansas Academy of Science

Several definitions of the term "engineer" are presented, discussed, and contrasted with the term "scientist". These definitions demonstrate the fundamental differences between engineers and scientists and their professions The engineering method is compared with the scientific method and the value of each is discussed. Several aspects of engineering education are covered. The need for more liberally educated engineers is emphasized and the impact of computers on engineering education and the engineering profession is discussed. The value of a good science foundation in an undergraduate engineering program is also stressed. An engineering education is only as good as the engineering educators …