Engineering Education Commons^™

Method Of Joints: Theory And Practice Of Designing, Building, And Testing Trusses, Andrew J. Hughes, Chris Merrill

Educational Leadership & Technology Faculty Publications

The authors of this article, like many of us, are proponents of engineering education but are also proponents of shop skills, craftsmanship, technological literacy, and the tacit knowledge and skills developed through applying sound theories during practical hands-on learning. The authors believe that engineering is an important aspect of our discipline, but so are the application of thinking, tool skills, measurement, geometric construction, manufacturing, instrumentation, testing and analysis, mathematical and scientific theories, and many other hands-on, minds-on skillsets that all need to maintain association with our discipline. As the authors are proponents for engineering education that is done well, they …

Revolutionizing The Mechanical Engineering Undergraduate Curriculum, Shelby Ann Mcneilly, Krishna Pakala, Donald Plumlee

Mechanical and Biomedical Engineering Faculty Publications and Presentations

As the age of technological advancement and occupational opportunity continues to progress, companies must be constantly adjusting and transforming in order to accommodate industry demands. With these quickly developing requirements comes an expectation of employee experience and skill sets. For individuals seeking a career in mechanical engineering, moving forward with the tools necessary for success in this continuously evolving world begins with higher education. This paper is the first of a three-part series to report on the progress of Boise State University’s Mechanical and Biomedical Engineering Department’s mission to implement a revolutionized curriculum in their academic program. This paper will …

Upgrading Of A Data Communication And Computer Networks Course In Engineering Technology Program, Murat Kuzlu, Otilia Popescu

Engineering Technology Faculty Publications

Data network communications is traditionally a course offered by computer engineering technology curricula, with the primary objective to introduce to the fundamental concepts in data communication and computer networks, as well as some level of hands-on component related to this area. Typical topics in such courses are the layered model of data communication, specifically the OSI seven-layered model, Internet routing, communication standards, protocols and technologies, and learning methods used to design the network and send data over the network in a secure manner. In the last decades, the data communication and applications have grown and become ubiquitous in both industry …

Curriculum Development For Robotics Technology Program, Sanjeevi Chitikeshi, Shirshak K. Dhali, Betsey Odell, Vukica Jovanovic, Cheng Y. Lin

Engineering Technology Faculty Publications

With a growing need for a more skilled workforce, providing industry-driven and employment centric training services is an important national priority. Over 3.4 million manufacturing jobs will need to be filled across the United Sates over the next decade. The skills gap is becoming greater based on the statistics provided by the Global Robotics Technology Market: Forecast, 2014-2020 published by Research and Markets, reporting that the worldwide robotics market is forecast to grow from the 2015 level of $26.98B to $82.78B in 2020. This 11 % compounded average growth in the next five years is unprecedented. Given the anticipated growth …

Design A Class Infusion Project Of Asme Geometric Dimensioning And Tolerancing Standard, Cheng Y. Lin, Hamid Eisazadeh, Alok K. Verma

Engineering Technology Faculty Publications

This paper describes the development of a short course of Geometric Dimensioning and tolerancing (GD&T) for Mechanical Engineering (ME)/Mechanical Engineering Technology (MET) students in their freshman/sophomore classes. This class-infusion project was assisted and validated by an ASME Standards and Certification Engineer and was jointly sponsored by the ASME Committee on Engineering Education and the ASME Council on Standards and Certification. To assess the performance of the project, an instrument was developed with multiple-choice problems and survey questions for the students. The results of a field test in a sophomore manufacturing class are presented. The module is available at the ASME …

Establishing A Content Taxonomy For The Coherent Study Of Engineering In P-12 Schools, Greg Strimel, Tanner Huffman, Michael Grubbs, Eunhye Kim, Jamie Gurganus

Journal of Pre-College Engineering Education Research (J-PEER)

Engineering education has increasingly become an area of interest at the P-12 level, yet attempts to align engineering knowledge, skills, and habits to existing elementary and secondary educational programming have been parochial in nature (e.g., for a specific context, grade, or initiative). Consequently, a need exists to establish a coherent P-12 content framework for engineering teaching and learning, which would serve as both an epistemological foundation for the subject and a guide for the design of developmentally appropriate educational standards, performance expectations, learning progressions, and assessments. A comprehensive framework for P-12 engineering education would include a compelling rationale and vision …

Seventh-Grade Students' Use Of Heat Transfer Conceptions During An Engineering Design-Based Stem Integration Curriculum, Emilie A. Siverling, Tamara J. Moore

Integrated Engineering Department Publications

As the integration of STEM becomes increasingly important in pre-college education, it is important to study models of STEM integration. One model, engineering design-based STEM integration, has shown promising results in terms of student science content learning. This study’s purpose was to explore one student team’s use of heat transfer conceptions as they participated in an engineering design-based STEM integration curriculum. A case study research design, along with procedures from qualitative content analysis, were used to identify scientific and alternative conceptions that the seventh-grade students communicated during the unit. The main result is that the students spoke and wrote about …

What's The Buzz?, Christine L. Moskalik

Professional Learning Day

A fun, interdisciplinary, hands-on activity with circuits, engineering, and bees Teachers will learn how to implement an activity with their students to explore circuit basics, energy transfer, and pollination through a hands-on toothbrush-bot activity that is coupled with a fun storyline involving honey bee communication and behavior.

Concrete Beam Design: Pouring The Foundation To Engineering In T&E Classrooms, Andrew J. Hughes, Chris Merrill

Educational Leadership & Technology Faculty Publications

Ask a middle or high school student if they could design a concrete beam that weighs only 20 pounds and is 36” long but must hold 600 pounds without failing. What is the student likely to say? What if the student was told that, with some optimized decision making based on relatively straightforward mathematics, their beam could hold 2400 pounds or more? The focus of this article is not on concrete beam design, it is rather an introduction to engineering principles in beam design using a lab activity. The concepts and skills learned in this article will lead students into …

Analyzing Concrete Beam Design: Verifying Predictions In T&Ee Classrooms, Andrew J. Hughes, Chris Merrill

Educational Leadership & Technology Faculty Publications

Design is often accepted as a fundamental aspect of engineering (Dym, et al., 2005). The design process is frequently portrayed as a set of steps. However, the design process is more complex than just a set of steps in a relatively fixed process. The complex nature of design, design thinking, questioning, and decision-making is exactly what technology and engineering classrooms are well suited to address. When addressing the question—“Why is technology and engineering education (T&EE) so important?”—the authors believe T&EE’s importance relates to our discipline’s ability to solve complex problems by balancing theory and practice in engaging hands-on learning scenarios …

Attitudes Towards Teaching Computational Thinking And Computer Science: Insights From Educator Interviews And Focus Groups, Jorge Valenzuela

Journal of Computer Science Integration

In the last three years, integration of both computational thinking (CT) and computer science (CS) into K-12 instruction has become a focus of many schools throughout the Commonwealth of Virginia and the United States. With this new widespread demand, educational leaders and educators are focusing efforts on understanding the core concepts and practices of CT and CS, looking for logical connections for integrating across curriculum, and seeking strategies for implementing a wide variety of educational technology tools (apps and devices). This phenomenological research study was designed to gather depth information from 14 K-16 educators through both semi-structured interviews and two …

Argument-Driven Engineering In Middle School Science: An Exploratory Study Of Changes In Engineering Identity Over An Academic Year, Lawrence Chu, Victor Sampson, Todd L. Hutner, Stephanie Rivale, Richard H. Crawford, Christina L. Baze, Hannah S. Brooks

Journal of Pre-College Engineering Education Research (J-PEER)

The goal of this study was to examine how the use of a new instructional model is related to changes in middle school students’ engineering identity. The intent of this instructional model, which is called argument-driven engineering (ADE), is to give students opportunities to design and critique solutions to meaningful problems using the core ideas and practices of science and engineering. The model also reflects current recommendations found in the literature for supporting the development or maintenance of engineering identity. This study took place in the context of an eighth-grade science classroom in order to explore how middle school students’ …

Exercises Integrating High School Mathematics With Robot Motion Planning, Ronald I. Greenberg, George K. Thiruvathukal

Computer Science: Faculty Publications and Other Works

This paper presents progress in developing exercises for high school students incorporating level-appropriate mathematics into robotics activities. We assume mathematical foundations ranging from algebra to precalculus, whereas most prior work on integrating mathematics into robotics uses only very elementary mathematical reasoning or, at the other extreme, is comprised of technical papers or books using calculus and other advanced mathematics. The exercises suggested are relevant to any differerential-drive robot, which is an appropriate model for many different varieties of educational robots. They guide students towards comparing a variety of natural navigational strategies making use of typical movement primitives. The exercises align …

Iron Range Engineering - An Overview Of Design And Open-Ended Problem Solving Activities In An Interdisciplinary, Project-Based Learning Program, Elizabeth Pluskwik

Integrated Engineering Department Publications

Project-based learning (PBL) in engineering education is growing at a rapid pace. The Iron Range Engineering (IRE) Program of Minnesota State University Mankato, is an upper division (3rd and 4th year) undergraduate engineering education program based on the Aalborg, Denmark PBL model. Students work in teams to solve industry-sourced projects each semester. The learning of engineering is accomplished in three domains - technical learning of engineering concepts, professionalism, and design, which we call the “three-legged stool” of engineering education. The program promotes entrepreneurial mindset and innovative open-ended problem-solving in context. Fifty students are enrolled in 3rd and 4th-year studies at …

Voices Of Our Students: Using Evidence-Based Methods To Inform A Multidisciplinary Engineering Program Design, Vicki Stieha, Noah Salzman, Amy J. Moll

Materials Science and Engineering Faculty Publications and Presentations

Listening carefully to our students and integrating the variables that matter to them is a step that we can take to increase the number of women and underrepresented minority graduates in engineering. This paper shares an evaluative case study as we report findings from data gathering tools guiding our continuous improvement process. The findings illuminate students’ perceptions of their engineering design course and curriculum. We conclude by discussing the pedagogical decisions the teaching team is making as a result of listening to our students’ voices.

Fossil Mobiles: Exploring The Process Of Art As Science Inquiry For Elementary Students Through A Grounded Theory Study, Jolene K. Teske, Courtney Clausen, Harun Parpucu, Phyllis Gray, Audrey C. Rule

Journal of STEM Arts, Crafts, and Constructions

Arts integration into Science, Technology, Engineering, and Mathematics (STEM) subject areas is currently an important area of investigation. This study developed a grounded theory of how artmaking of a mobile related to fossil life of the Devonian period engendered geoscience inquiry. Data were collected from elementary students entering fourth to sixth grade (7 male, 9 female) attending a week-long summer camp at a Midwestern university. Students engaged in a daily hour-long class creating fossil mobiles and learning geoscience content through illustrated slide shows, form and function sets of materials related to Devonian fossils, fossil books, and a fossil hunter- fossil …

Exploring Preservice Teachers’ Still-Life Paintings Of Crystals With Artist-Focused Compared To Science-Focused Introductions, Mahjabeen Hussain, Dessy Stoycheva, Audrey C. Rule, Denise A. Tallakson

Journal of STEM Arts, Crafts, and Constructions

This experimental study was undertaken with preservice teachers to test whether the use of science integration into arts education increases demonstration of science details and creative features in artwork. Two conditions were created: arts-focused and science-focused; gouache still-life paintings were produced and analyzed, and an attitude survey was completed. The results suggested that science integration into visual arts classes increased creativity for the arts-focused condition and increased science concepts in the science-focused condition. Participants in both conditions reported positive attitudes, specifically, high levels of enjoyment, alluded to lack of experience with arts and creative projects, and expressed desire for more …

A Content Analysis Of Thirty Children’S Picture Books About Ecology, Natalia Martín Martín, Jennifer L. Hageman, Sarah E. Montgomery, Audrey C. Rule

Journal of STEM Arts, Crafts, and Constructions

This study presents a content analysis of 30 ecology-themed children’s picture books published in English and Spanish from 1994 to the present. Books were analyzed for the following aspects: 1) Nature appreciation, 2) Interrelatedness of Nature, 3) Realistic ecology problem, 4) Differing perspectives, 5) Hope for a solution, 6) Reflection and responsibility, 7) Steps for a solution, 8) Positive tone, 9) Representation of diversity, 10) Appropriate illustrations, 11) Story appeal, and 12) Developmental appropriateness. Scoring guidelines are provided in an appendix. Content analysis results revealed that most books raise awareness about the impact of human action on the environment, although …

Ocean Underwater Scene Dioramas Of First Graders With Submarine Porthole Views, Ksenia Zhbanova, Audrey C. Rule, Denise A. Tallakson

Journal of STEM Arts, Crafts, and Constructions

Ecology education of the younger generations is vital for worldwide change of people’s attitudes toward nature warranted by the current global ecological crisis. Yet, this goal needs to be addressed through age-appropriate activities that are educational and engaging. This practical article focuses on dioramas of ocean reef life made by first graders. This arts-integrated project served two main purposes: 1) education of primary students about ocean ecology and helping students realize their roles in saving nature 2) increasing student science content knowledge. Additionally, several other benefits of making dioramas emerged during this project, including highly creative student products, genuine interest …

Slime Bash Social: A Tactile Manipulative For Child And Youth Play, Joyce A. Levingston, Marie E. Adebiyi, Brian Hadley, Younis Al-Hassan, Dongyub Back, Michelle Cook, Christopher R. Edginton

Journal of STEM Arts, Crafts, and Constructions

The play product of slime has gained increasing popularity amongst children and youth throughout the United States. Slime can be thought of as a tactile manipulative that can be shaped, stretched, expanded, lumped together, twisted, squeezed, squashed, folded, rolled, shredded, twirled, swirled, pounded, and cut or pulled apart. As a learning tool, slime can and does support STEM initiatives and programs. Slime can be created using simple ingredients that are easily measured, combined, and prepared by children and youth. In addition, slime can incorporate components such as glitter, beads, shaving cream, color dyes and other items. This paper offers an …

Practical Art Projects Related To Children’S Picture Books About Ecology, Jennifer L. Hageman, Natalia Martín Martín, Sarah E. Montgomery, Audrey C. Rule

Journal of STEM Arts, Crafts, and Constructions

This study presents art projects that reinforce scientific content presented in children’s picture books about ecology. Ten K-6 students from varying socioeconomic classes, and different cultural and language backgrounds from the United States and Spain participated. Next Generation Science Standards were identified and addressed in these art projects. Students’ understanding and engagement were evaluated through teacher observations, photographs, and a student attitude survey. Upper- and lower-elementary students evidenced increased understanding of environmental issues, and high level of enjoyment and engagement through these art projects integrated with science content. Researchers encourage educators to incorporate picture books and art in science lessons …

Editorial: Developing Creativity Through Stem Subjects Integrated With The Arts, Ksenia Zhbanova

Journal of STEM Arts, Crafts, and Constructions

This issue of the Journal of STEM Arts, Crafts, and Constructions is focused on creativity - one of the most highly-desirable 21^st Century skills on personal and global levels. Time, pedagogical knowledge, and resource constraints limit the number of opportunities for teachers to develop creativity in students. In this editorial, creativity development steps and strategies are illuminated along with specific roles of STEM subjects and the arts in development of student creativity. The processes of creativity development used in STEM and the arts are compared to each other and to the non-subject-specific creative process model of Root-Bernstein and Root- …

Finding The Balance: A Technical Writing Assignment During A Co-Op Work Experience, Lindsay Corneal, Debbie Morrow

Presentations

The mandatory three semester co-op work experience in the engineering programs at Grand Valley State University allows students to apply their education to real engineering situations. As part of the regular assessment of the co-op work experiences, site visits are held between faculty, students, and the employers. It has very often been noted by employer supervisors that students perform well technically but still lack polish communicating in a professional setting. To address this, a project was launched to incorporate online writing instruction as academic content associated with the Co-op II semester, with a technical proposal writing assignment as the major …

Disciplinary Learning From An Authentic Engineering Context, Catherine Langman, Judith Zawojewski, Patricia Mcnicholas, Ali Cinar, Eric Brey, Mustafa Bilgic, Hamidreza Mehdizadeh

Journal of Pre-College Engineering Education Research (J-PEER)

This small-scale design study describes disciplinary learning in mathematical modeling and science from an authentic engineeringthemed module. Current research in tissue engineering served as source material for the module, including science content for readings and a mathematical modeling activity in which students work in small teams to design a model in response to a problem from a client. The design of the module was guided by well-established principles of model-eliciting activities (a special class of problem-solving activities deeply studied in mathematics education) and recently published implementation design principles, which emphasize the portability of model-eliciting activities to many classroom settings.

Two …

Exploring Engineering Club, Samantha Corey, Stephen Yaghmour

Honors Program: Expanded Learning Clubs

Exploring Engineering Club provides an introduction to a variety of engineering problems and piques the students’ interest in engineering by accompanying the information with hands-on problem solving activities mainly related to structural engineering. The activities will often be done in teams which will teach good teamwork skills, as well as problem solving and critical thinking.

Continued Efforts In Ti Arm M4 Microcontroller Curricula Developments And Assessments Between Three Different Institutions And Programs, Steve C. Hsiung, Lijian Xu, Feng Jao, Yonghui Wang, Suxia Cui

Engineering Technology Faculty Publications

This project is a continuation in efforts to upgrade the curricula in microcontroller related courses that are facing difficulties in the disappearing and lack technical supports in hardware and software of 68XXX and 80XXX microcontrollers. Through the study of a NSF supported project "Transform the Innovated Design and Development of an Embedded Design Training System and Associated Support Curricula into a Commercial Available Product" that interviewed 130 faculty/teachers/students across the U.S. has revealed on finding newly available microcontrollers is an urgent issue in the academic communities. Based on the supports on hardware and software and function libraries, the TI ARM …

Design A Portable Sensing Platform With A Lidar And Ti Arm M4 Controller, Bin Hu, Steve C. Hsiung, Matthew B. Kersey

Engineering Technology Faculty Publications

The Microcontrollers/microelectronics have been used in variety of engineering applications on complex and efficient operations. One of the challenges in applying existing microelectronic technologies to these engineering systems lies in the need of modular portability, scalability, customizability, and compatibility. This paper focuses on addressing such challenges by designing a portable sensing platform that integrates a Lidar with USB interface and TI ARM M4 microcontroller. This developed sensing system will serve as an effective teaching platform to create new or enhance existing microelectronic courses that allow students to gain hands-on experiences in mobile embedded system designs. Moreover, the customizability and portability …

Big Five Technologies In Aeronautical Engineering Education: Scoping Review, Ruth Martinez-Lopez

International Journal of Aviation, Aeronautics, and Aerospace

The constant demands that technology creates in aerospace engineering also influence education. The identification of the technologies with practical application in aerospace engineering is of current interest to decision makers in both universities and industry. A social network approach enhances this scoping review of the research literature to identify the main topics using the Big Five technologies in aerospace engineering education. The conceptual structure of the dataset (n=447) was analyzed from different approaches: at macro-level, a comparative of the digital technology identified by cluster analysis with the number of co-words established in 3 and 8 and, a keyword central structure …

Arts Integration Into Elementary Science: Force And Motion And Natural Disasters, Eric C. Ooms, Tabitha M. Wu, Ashley R. Kokemuller, Sarah E. Montgomery, Audrey C. Rule

Journal of STEM Arts, Crafts, and Constructions

This study explored the effect of arts integration into science during an instructional unit on force and motion and one addressing natural weather disasters. Seventy-eight elementary students in four classrooms (grade 5, grade 4, and two at grade 3) participated in the study. This study assessed content retention, student-made products (rollercoasters and hurricane shelters), and student attitudes. All students in each classroom experienced the two units of instruction, one unit in the experimental condition of arts integration and one unit in the control condition without arts integration. Both conditions involved students in constructing models of given materials. Each unit consisted …

Second Grade Students Learn About Civil Engineers And Erosion, Andrea Earline Anderson, Jessica A. Meier

Journal of STEM Arts, Crafts, and Constructions

The integration of art into curricula focused on teaching science is a new perspective in education designed to reach a broader range of students. The current study examined the process of second-grade students participating in science and art activities through qualitative content analysis. The subjects of science and art were not taught to the students separately, rather, students engaged in both subjects simultaneously, in an integrated manner. Participants were 23 second-grade students (11 female and 12 male; age range 7 to 8 years) who were learning about erosion through sketching and creative construction and the work of civil engineers through …