VLSI and Circuits, Embedded and Hardware Systems Commons^™

Woodward Cuk Converter, Aditi Venkatesh, Jennifer Pereira

Honors Capstones

The purpose of this senior design project is to design and build a Cuk converter, a type of buck–boost converter. The project involves developing an analytical model and validating it through hardware testing. Cuk converters are important because they are widely used in everyday electronics, particularly in renewable energy systems such as solar power, power supplies, and electric vehicles. Their ability to increase, decrease, and reverse the polarity of voltage makes them flexible. The continuous input and output currents result in low ripple, reducing component stress and improving efficiency. To achieve these goals, simulations will be conducted using LTspice to …

Analytical And Semi-Analytical Modeling Of Solar Cells Using The Lambert W Function: A Comprehensive Review Of Equivalent Circuits, Adel El-Shahat, Martin Ćalasan, Snežana Vujoševic, Shady H. E. Abdel Aleem

Engineering Technology Faculty Publications

The modeling of photovoltaic (PV) cells through equivalent circuits forms a central element in the analysis, simulation, and optimization of solar energy systems. Traditional approaches often depend on iterative numerical methods to solve the implicit current–voltage (I–V) equations. In contrast, the Lambert W function has emerged as an effective mathematical tool that enables closed-form or semi-analytical expressions for a wide range of PV models. This paper presents a Lambert W-centered review of analytical and semi-analytical formulations for PV equivalent-circuit models, covering classical single-diode and multi-diode structures and modern variants incorporating additional elements, voltage-dependent parameters, and topology rearrangements. The models are …

Aquaflow Pro, Ashton Henley, Jeannie Fritz, Khalin Rubbo

Williams Honors College, Honors Research Projects

Changing aquarium water is a hassle, and when done incorrectly, it will result in changes in water quality and potential harm to aquatic life. Aquarium water changes are crucial in removing toxins such as ammonia, nitrites, and nitrates. There is a need for an automated, stressless fish tank water-changing solution that ensures aquatic safety. To this end, an automatic temperature-controlled fish tank water changing system was designed, carrying out a water change for a designated main tank in which water heated within an inbound reservoir is pumped into the tank to replace the outbound water, responding to both the tank’s …

Pseudo-Soft-Switching Switched-Capacitor Drive Circuits For Small-Scale Dielectric Actuators, Yanqiao Li

Dartmouth College Ph.D Dissertations

Applications including micro-robotics and haptics have motivated extensive exploration of dielectric actuators due to their high bandwidth and high efficiency at cm and mm scales. To maximize their benefits, dielectric actuators, including piezoelectric and electrostatic actuators, typically require high driving voltages, ranging from 100V to several kV. Generating such high driving voltages presents a challenge for drive circuits, particularly when powered by a small battery. Dielectric actuators are predominantly capacitive in most circumstances, necessitating the drive circuits to deliver and recover reactive energy for efficient operation. In some applications, such as micro-robotics, the drive circuits may need to have a …

Hybrid Dc-Dc Converters For Soft Charging Capacitive Actuators: Modeling, Analysis And Design, Bahlakoana Mabetha

Dartmouth College Ph.D Dissertations

Recent trends in haptics, microrobotics and ultrasound technology have shown an increasing use of piezoelectric and other electrostatic actuators. These actuators are suited for miniaturized applications due to their high power density and favorable scalability at a small size. Their electrical impedance at lower frequency (their typical operating range) is capacitive, therefore, they can be modeled as capacitive loads.

The driving circuits for capacitive actuators need to deliver and recover (bidirectional) dominantly reactive power, unlike typical power electronics converters for resistive loads which deliver (unidirectional) real power to the load. Therefore, the circuits, operation, and optimization required to drive these …

Artificial Intelligence Applications For Grid-Connected Solar Inverters, Utkirjon Ubaydullaev, Sarvinoz Mirzaeva, Hasan Mustafoev

Chemical Technology, Control and Management

The increasing global demand for renewable energy has highlighted the importance of grid-connected solar inverters in ensuring efficient and stable power conversion. However, challenges such as fluctuations in solar energy generation, grid disturbances, and power quality issues necessitate advanced control strategies. The integration of artificial intelligence (AI) into solar inverters presents a transformative solution, enhancing performance, adaptability, and reliability in real-world applications.

This review explores the role of AI techniques, including machine learning (ML), deep learning (DL), fuzzy logic, and reinforcement learning (RL), in optimizing key inverter functionalities such as maximum power point tracking (MPPT), fault detection, power quality enhancement, …

Automated Solutions For Hydroponic Plant Growth, Sydney Mcclure, Adam Lachguar

Sustainability Conference

Within the past year, Project H.O.M.E. has been focusing on the design and development of a semi-automatic hydroponic system specifically for sustaining plant life in Martian-like conditions. Given the significance of extended space-based travel, where the duration of human life in space is a crucial factor, growing food becomes imperative. This project has integrated electrical engineering and computer science, with features like automated pH testing and sensor-based evaluations. Key functionalities, including timed watering and automatic adjustments, were coded to enhance plant care. Initially, the project’s comprehensive research and strategic planning resulted in detailed blueprints and computer-aided design models for the …

Resilient, Sustainable, And Secure Systems Support For Ultra-Low-Power Computational Things, Nicole Tobias

All Dissertations

Wireless battery-free and energy-harvesting devices are expanding the reach and vision of the Internet of Things, where trillions of embedded computational things interconnect ubiquitously around us and inform many different aspects of our everyday lives. Designing these systems without batteries and interconnecting wires lowers maintenance, environmental, and economic costs while also extending device lifetime and deployment opportunities. Over the last decade, research on these ultra-low-power embedded sensors and systems has dramatically increased — enabling new and exciting prospects in many different scientific fields, from smart building and health monitoring applications to animal and activity tracking.

These systems are not without …

Improving Cellphone-Based Bio-Imaging Technique For Fluorescence Detection, Erteza T. Efaz

LSU Master's Theses

The research presented in this thesis focuses on the design, development, and evaluation of a fluorescence detection system. The system is implemented primarily as an Android application, Auto Camera, which leverages smartphone cameras to capture and analyze fluorescent images. The application provides a user-friendly interface with some configurable features like exposure time, ISO speed, and storage limit; as well as defining detection thresholds and setting acquisition intervals. This study begins with the architectural framework of the Android application, which is written in Java using Android Studio. The API compatibility is set to version 33, and users are prompted to grant …

Design And Implementation Of High-Efficiency, Lightweight, System-Friendly Solid-State Circuit Breaker, Dehao Qin

All Dissertations

Direct current (DC) distribution system has shown potential over the alternative current (AC) distribution system in some application scenarios, e.g., electrified transportation, renewable energy, data center, etc. Because of the fast response speed, DC solid-state circuit breaker (SSCB) becomes a promising technology for the future power electronics intensive DC energy system with fault-tolerant capability. First, a thorough literature survey is performed to review the DC-SSCB technology. The key components for DC-SSCB, including power semiconductors, topologies, energy absorption units, and fault detection circuits, are studied. It is observed that the prior studies mainly focus on the basic interruption capability of the …

Stream Processor Development Using Multi-Threshold Null Convention Logic Asynchronous Design Methodology, Wassim Khalil

Graduate Theses and Dissertations

Decreasing transistor feature size has led to an increase in the number of transistors in integrated circuits (IC), allowing for the implementation of more complex logic. However, such logic also requires more complex clock tree synthesis (CTS) to avoid timing violations as the clock must reach many more gates over larger areas. Thus, timing analysis requires significantly more computing power and designer involvement than in the past. For these reasons, IC designers have been pushed to nix conventional synchronous (SYNC) architecture and explore novel methodologies such as asynchronous, self-timed architecture. This dissertation evaluates the nominal active energy, voltage-scaled active energy, …

Wireless Environmental Weather Monitor, Joel Christie-Millett, Nathan Schroeder, Sylvester Wilson, Matthew Szijarto

Williams Honors College, Honors Research Projects

The goal of this senior design/honors project is to create a device that monitors environmental conditions in order to detect a wildfire. This device should notify a user of the status of the environment. The device should also last for 6 months without any human interaction. My role on the team is to design the power supply system that maximizes efficiency and uses renewable energy.

Evaluation Of Single Phase Smart Pv Inverter Functions In Unbalanced Residential Distribution Systems, Darren Symonette

Graduate Theses and Dissertations

In the United States, smart PV inverters integrated with residential distribution systems are becoming a more common occurrence. With integration of smart PV inverters, power utilities are experiencing an increase of number of operations with regards to switched capacitor banks, voltage regulators and on load tap changers. These increases can lead to excess wear and tear on the devices causing power utilities to perform unwanted replacement and maintenance. However, smart PV inverters when controlled under specific functions can enable these inverters to provide reactive power and voltage control which in turn lowers the number of operations for switched capacitor banks, …

Modified Q-Learning Method For Automatic Voltage Regulation In Wide-Area Multigeneration Systems, Brook Abegaz, Sina Zarrabian

Engineering Science Faculty Publications

The state-estimation and optimal control of multigeneration systems are challenging for wide-area systems having numerous distributed automatic voltage regulators (AVR). This paper proposes a modified Q-learning method and algorithm that aim to improve the convergence of the approach and enhance the dynamic response and stability of the terminal voltage of multiple generators in the experimental Western System Coordinating Council (WSCC) and large-scale IEEE 39-bus test systems. The large-scale experimental testbed consists of a six-area, 39-bus system having ten generators that are connected to ten AVRs. The implementation shows promising results in providing stable terminal voltage profiles and other system parameters …

Design Of A Bandgap Voltage Reference, Nicolaus Vail

Electrical Engineering Undergraduate Honors Theses

This thesis details the design process of a bandgap voltage reference (BGR) integrated circuit in a 180 nm CMOS process. A BGR provides a constant DC voltage across a range of operating temperatures and supply voltages. By its nature, the circuit is intended as a reference, not to provide current, so the output would be connected to a very high impedance, such as the gate of a transistor. At 27°C, this design provides a 955 mV reference voltage given a nominal VDD of 3 V. From 20°C to 175°C, the output voltage has a variance of 7.2 mV (approximately 0.8%) …

Junction Temperature Estimation Of Silicon Carbide Power Module Using Internal Gate Resistance As Temperature Sensitive Electrical Parameter, Michael Sykes

Graduate Theses and Dissertations

The junction temperature of a power module is measured non-intrusively and uninterrupted in its application by analyzing the dependency of gate resistance to temperature. The circuit configuration proposed consists of altering the gate loop path and adding a basic peak detection circuit with an added low-pass filter to accurately measure the small differences seen during a temperature change on the internal gate resistance. The testing on this Silicon Carbide power module shows that the internal gate resistance has a positive temperature coefficient. This causes the current and the voltage drop on the gate loop sensing resistance to reduce as the …

Modeling And Control Of Direct-Conversion Hybrid Switched-Capacitor Dc-Dc Converters, Ziyu Xia

Dartmouth College Ph.D Dissertations

Efficient power delivery is increasingly important in modern computing, communications, consumer and other electronic systems, due to the high power demand and thermal concerns accompanied by performance advancements and tight packaging. In pursuit of high efficiency, small physical volume, and flexible regulation, hybrid switched-capacitor topologies have emerged as promising candidates for such applications. By incorporating both capacitors and inductors as energy storage elements, hybrid topologies achieve high power density while still maintaining soft charging and efficient regulation characteristics. However, challenges exist in the hybrid approach. In terms of reliability, each flying capacitor should be maintained at a nominal `balanced' voltage …

A Bibliometric Review Of Characterization Of Outdoor Solar Pv Panel For Shading And Validation By Pv Emulator, Viplove Malik, Poojan Pavagadhi, Aman Kumar Pandey, Saharsh Vyas, Javed Sayyad, Paresh Nasikkar

Library Philosophy and Practice (e-journal)

Many researchers and experts have begun to work in Renewable Energy (RE) Research and Development (R&D) as an interdisciplinary area ineluctable solution to lower the use of conventional power generation or non-renewable resources. Solar photovoltaic energy has gained a lot of recognition as one of the best green alternatives. However, its firm reliance on environmental and climatic conditions makes it difficult for researchers to conduct experiments at the operational temperature (T) and Solar insolation level (G). These solar PV panels with a controllable light source are inefficient, unreliable, and unsuitable for testing PV algorithms such as Maximum Power Point Tracking …

Smart E-Bike Conversion Kit And Helmet, Megan West, Marena Trujillo, Hossein Asghari

Honors Thesis

With many state governments across the United States implementing shutdowns to prevent the spread of COVID-19, many bike retailers have seen dramatic increases in bike sales. Electric bicycles (e-bikes) have become increasingly popular as the public searches for alternatives to public transportation. Unfortunately, e-bike users assume some risk by riding bikes that are faster than conventional bicycles. While kits to convert conventional bicycles to e-bikes exist, no “smart” e-bike/helmet kit specifically designed to keep the user safe is currently available on the market. To mitigate risks, a smart e-bike conversion kit with multiple novel safety features, including auditory and visual …

Design And Fabrication Of A Microstrip Bandpass Filter In Ltcc, Allison Rucker

Electrical Engineering Undergraduate Honors Theses

The goal of the project was to design and fabricate a bandpass filter with a center frequency of 25GHz with a 2GHz bandwidth. The first step was to do the calculation to design a bandpass filter to meet these specifications along with the properties of the Dupont^TM GreenTape^TM 9K7. HFSS was then used to verify the results from the initial calculations. There was a significant error between the two results, so more tweaking was done to the calculations to get a better center frequency. After a final design was decided, the fabrication process started. Low-Temperature Co-Fired Ceramics (LLTC) …

Improvement Of Stability Of A Grid-Connected Inverter With An Lcl Filter By Robust Strong Active Damping And Model Predictive Control, Seungyong Lee

Graduate Theses and Dissertations

This study addresses development and implementation of robust control methods for a three-phase grid-connected voltage source inverter (VSI) accompanied by an inductive-capacitive-inductive (LCL) filter. A challenge of current control for the VSI is LCL filter resonance near to the control stability boundary, which interacts with the inverter control switching actions and creates the possibility of instability. In general, active damping is needed to stabilize the system and ensure robust performance in steady-state and dynamic responses. While many active damping methods have been proposed to resolve this issue, capacitor-current-feedback active damping has been most widely used for its simple implementation.

There …

Enercon Station Vacuum Pump Replacement, Clint Hembree, Jared D'Amico, Connor Moore, Paul Jeffrey Fontenot, Sydnee Castello, J.J. Clements

Senior Design Project For Engineers

This details the progress of the ENERCON pump replacement project as completed by the Kennesaw State University interdisciplinary senior design group. This project is a two-semester capstone effort for the engineering program at Southern Polytechnic School of Engineering, overseen by Dr. McFall during Fall 2020 and Dr. Khalid during Spring 2021 semesters. The 2020-2021 KSU Interdisciplinary Senior Design team was tasked with completing an Engineering Change Package (ECP) for existing vacuum pumps at ENERCON Station. The mechanical, electrical, and civil students worked together, performing evaluations on existing plant systems to ensure the plant could support the new vacuum pumps. By …

Logical Modeling Of Adiabatic Logic Circuits Using Vhdl, Lee Belfore

Electrical & Computer Engineering Faculty Publications

The underlying nature of adiabatic circuits is most accurately characterized at the circuit level as it is for traditional technologies. In order to scale system designs for adiabatic logic technologies, modeling of adiabatic circuits at the logic level is necessary. Logic level models of adiabatic logic circuits can facilitate the design, development, and verification of large scale digital systems that may be infeasible using circuit simulators. Adiabatic logic circuits can be powered with a four stage power clock consisting of idle, charge, hold, and recover stages that provides for adiabatic charging and charge recovery to give adiabatic circuits their low …

Hard Hat Ambient Liability Observer (Halo), Hunter Hykes, Nathan Kish, Brian Thomson

Williams Honors College, Honors Research Projects

Capturing workplace incident information is a growing area of concern for most companies. To assist with this, the design team proposed the H.A.L.O. This design uses time-of-flight sensors connected to LEDs to create a proximity-based hazard warning system. It also records incident data using an accelerometer and micro-SD card. This helps workers avoid some of the most common workplace injuries, slips, trips, and falls and accidental collisions.

Students have created a design with engineering, and marketing requirements that accomplish this task. The proposed design allows for this monitoring and mitigation systems to be attached to hard hats. Team members developed …

Solar Photovoltaic Performance Monitoring: A Bibliometric Review, Research Gaps And Opportunities, Javed Sayyad, Paresh Nasikkar

Library Philosophy and Practice (e-journal)

Electrical power generation has been revolutionized by growing demand and use of Renewable Energy (RE) sources such as Solar Photovoltaic (SPV) as the main electricity source in modern times. The main objective of this bibliometric analysis is to understand the scope of the literature available for SPV performance characterization. This detailed reviewed was performed on the documents related to SPV research considering all the subject categories from Scopus and Web of Science (WoS) databases. The patterns for the particular set of keywords were broke down with the recuperated outcomes from Scopus database in the language, publication type, year of publication, …

Fractional Order Identification Method And Control: Development Of Control For Non-Minimum Phase Fractional Order System, Majid Abdullah Alhomim

Graduate Theses and Dissertations

The increasing use of renewable energy has resulted in the need for improved a dc-dc converters. This type of electronic-based equipment is needed to interface the dc voltages normally encountered with solar arrays and battery systems to voltage levels suitable for connecting three phase inverters to distribution level networks. As grid-connected solar power levels continue to increase, there is a corresponding need for improved modeling and control of power electronic converters. In particular, higher levels of boost ratios are needed to connect low voltage circuits (less than 1000 V) to medium voltage levels in the range of 13 kV to …

Resistive Switching In Fto/Cuo-Cu2o/Au Memory Devices, Amir Shariffar, Haider Salman, Tanveer A. Siddique, Wafaa Gebril, M. Omar Manasreh

Electrical Engineering Faculty Publications and Presentations

Memristors are considered to be next-generation non-volatile memory devices owing to their fast switching and low power consumption. Metal oxide memristors have been extensively investigated and reported to be promising devices, although they still suffer from poor stability and laborious fabrication process. Herein, we report a stable and power-efficient memristor with novel heterogenous electrodes structure and facile fabrication based on CuO-Cu2O complex thin films. The proposed structure of the memristor contains an active complex layer of cupric oxide (CuO) and cuprous oxide (Cu2O) sandwiched between fluorine-doped tin oxide (FTO) and gold (Au) electrodes. The fabricated memristors demonstrate bipolar resistive switching …

Low-Power Cmos Cross-Coupled Differential-Drive Rectifier For Ambient Radio Frequency Energy Harvesting Systems, Sing Leung Gabriel Chong

Student Works (2020-2029)

Wireless Sensor Node (WSN) for the Internet of Things (IoT) and Internet of Everything (IoE) will require harvesting low-power ambient Radio Frequency (RF) energy to achieve self-power capabilities, alleviating the need of batteries. The research title of “Low-Power CMOS Cross-Coupled Differential-Drive Rectifier for Ambient Radio Frequency Energy Harvesting Systems” relates to the design of integrated circuit (IC) rectifiers for low-power ambient RF energy harvesting (RFEH) in complementary-metal-oxide-semiconductor (CMOS) technology. The adoption of CMOS for the rectifier designs is to achieve small physical form factor, low-cost, and system-on-chip (SoC) integration. The rectifier is the main circuit in an ambient RFEH system …

Area Efficient Device Optimization For Esd Protection In High Speed Interface Ics, Dan Thomas Jarard

Graduate Theses and Dissertations

Electrostatic discharge (ESD) protection is considered as a vital step in integrated circuit (IC) manufacturing process. IC chips are unable to overcome the effects of transient events without adequate discharge protection. Recent trend in the industry has seen the incorporation of system level ESD protection within the IC chip. Incorporating system level on-chip ESD protection often increases cost, degrades circuit performance and consumes layout area which could otherwise be used for improving the circuit performance. These design challenges could be easily overcome if the parasitic components in a circuit were used for ESD protection. Despite the various design challenges, on-chip …

Investigations Of New Fault-Tolerant Methods For Multilevel Inverters, Haider Mhiesan

Graduate Theses and Dissertations

The demands of power electronics with high power capability have increased in the last decades. These needs have driven the expansion of existing power electronics topologies and developing new power electronics generations. Multilevel inverters (MLI) are one of the most promising power electronics circuits that have been implemented and commercialized in high-voltage direct current (HVDC), motor drives, and battery energy storage systems (BESS). The expanding uses of the MLI have lead to creation of new topologies for different applications. However, one of the disadvantages of using MLIs is their complexity. MLIs consist of a large number of switching devices, which …