Systems and Communications Commons^™

The Factors Influencing The Acceptance Of Web-Based E-Learning System Among Academic Staffs Of Saudi Arabia, Ikhlas Zamzami

Future Computing and Informatics Journal

It is possible to learn more quickly and effectively with e-learning software development because it provides learners with convenient and flexible learning environments. This allows them to progress further in their careers. Reports on web-based e-learning systems for in-service education have frequently neglected to include the viewpoint of the instructor. In order to conduct quantitative research, a sample of 50 academic staff members was selected. The purpose of this study was to investigate various factors that influence the intention to use web-based e-learning, with the theoretical foundation being provided by university lecturers. According to the findings of the study, the …

Review Of Data Mining Techniques For Detecting Churners In The Telecommunication Industry, Mahmoud Ewieda, Mohamed Ismail Roushdy, Essam Shaaban

Future Computing and Informatics Journal

The telecommunication sector has been developed rapidly and with large amounts of data obtained as a result of increasing in the number of subscribers, modern techniques, data-based applications, and services. As well as better awareness of customer requirements and excellent quality that meets their satisfaction. This satisfaction raises rivalry between firms to maintain the quality of their services and upgrade them. These data can be helpfully extracted for analysis and used for predicting churners. Researchers around the world have conducted important research to understand the uses of Data mining (DM) that can be used to predict customers' churn. This …

Efficiently Estimating Survival Signature And Two-Terminal Reliability Of Heterogeneous Networks Through Multi-Objective Optimization, Daniel Bruno Lopes Da Silva

Graduate Theses and Dissertations

The two-terminal reliability problem is a classical reliability problem with applications in wired and wireless communication networks, electronic circuit design, computer networks, and electrical power distribution, among other systems. However, the two-terminal reliability problem is among the hardest combinatorial problems and is intractable for large, complex networks. Several exact methods to solve the two-terminal reliability problem have been proposed since the 1960s, but they have exponential time complexity in general. Hence, practical studies involving large network-type systems resort to approximation methods to estimate the system's reliability. One attractive approach for quantifying the reliability of complex systems is to use signatures, …

Multilayer Perceptron With Auto Encoder Enabled Deep Learning Model For Recommender Systems, Subhashini Narayan

Future Computing and Informatics Journal

In this modern world of ever-increasing one-click purchases, movie bookings, music, health- care, fashion, the need for recommendations have increased the more. Google, Netflix, Spotify, Amazon and other tech giants use recommendations to customize and tailor their search engines to suit the user’s interests. Many of the existing systems are based on older algorithms which although have decent accuracies, require large training and testing datasets and with the emergence of deep learning, the accuracy of algorithms has further improved, and error rates have reduced due to the use of multiple layers. The need for large datasets has declined as well. …

Integrated Cyberattack Detection And Handling For Nonlinear Systems With Evolving Process Dynamics Under Lyapunov-Based Economic Model Predictive Control, Keshav Kasturi Rangan, Henrique Oyama, Helen Durand

Chemical Engineering and Materials Science Faculty Research Publications

Safety-critical processes are becoming increasingly automated and connected. While automation can increase effciency, it brings new challenges associated with guaranteeing safety in the presence of uncertainty especially in the presence of control system cyberattacks. One of the challenges for developing control strategies with guaranteed safety and cybersecurity properties under suffcient conditions is the development of appropriate detection strategies that work with control laws to prevent undetected attacks that have immediate closed-loop stability consequences. Achieving this, in the presence of uncertainty brought about by plant/model mismatch and process dynamics that can change with time, requires a fundamental understanding of the characteristics …

Continuity Of Chen-Fliess Series For Applications In System Identification And Machine Learning, Rafael Dahmen, W. Steven Gray, Alexander Schmeding

Electrical & Computer Engineering Faculty Publications

Model continuity plays an important role in applications like system identification, adaptive control, and machine learning. This paper provides sufficient conditions under which input-output systems represented by locally convergent Chen-Fliess series are jointly continuous with respect to their generating series and as operators mapping a ball in an Lp-space to a ball in an Lq-space, where p and q are conjugate exponents. The starting point is to introduce a class of topological vector spaces known as Silva spaces to frame the problem and then to employ the concept of a direct limit to describe convergence. The proof of the main …

Methods For Ensuring The Stability Of Design Reliability In Rural Telecommunications Network During Its Operation, Akbar Daniyarovich Normurodov Mr.

Chemical Technology, Control and Management

The article discusses methods to ensure the stability of the design reliability of a rural telecommunications network during its operation. In rural areas, for a number of reasons, the power supply from the power supply network is interrupted at random times. In this regard, backup power sources are provided for the power supply of OLT equipment. To provide a telecommunication network with stable power supply, it is proposed to use solar sources of electricity.

Low Latency Anomaly Detection With Imperfect Models, Samrat Nath

Graduate Theses and Dissertations

The problem of anomaly detection deals with detecting abrupt changes/anomalies in the distribution of sequentially observed data in a stochastic system. This problem applies to many applications, such as signal processing, intrusion detection, quality control, medical diagnosis, etc. A low latency anomaly detection algorithm, which is based on the framework of quickest change detection (QCD), aims at minimizing the detection delay of anomalies in the sequentially observed data while ensuring satisfactory detection accuracy. Moreover, in many practical applications, complete knowledge of the post-change distribution model might not be available due to the unexpected nature of the change. Hence, the objective …

Internet Of Things For Sustainable Mining, Abdul Salam

Faculty Publications

The sustainable mining Internet of Things deals with the applications of IoT technology to the coupled needs of sustainable recovery of metals and a healthy environment for a thriving planet. In this chapter, the IoT architecture and technology is presented to support development of a digital mining platform emphasizing the exploration of rock–fluid–environment interactions to develop extraction methods with maximum economic benefit, while maintaining and preserving both water quantity and quality, soil, and, ultimately, human health. New perspectives are provided for IoT applications in developing new mineral resources, improved management of tailings, monitoring and mitigating contamination from mining. Moreover, tools …

Internet Of Things In Sustainable Energy Systems, Abdul Salam

Faculty Publications

Our planet has abundant renewable and conventional energy resources but technological capability and capacity gaps coupled with water-energy needs limit the benefits of these resources to citizens. Through IoT technology solutions and state-of-the-art IoT sensing and communications approaches, the sustainable energy-related research and innovation can bring a revolution in this area. Moreover, by the leveraging current infrastructure, including renewable energy technologies, microgrids, and power-to-gas (P2G) hydrogen systems, the Internet of Things in sustainable energy systems can address challenges in energy security to the community, with a minimal trade-off to environment and culture. In this chapter, the IoT in sustainable energy …

The Potentials Of Faecal Sludge Treatment Using Local Conditioners In Tanzania: A Review, Doglas Benjamin1

Tanzania Journal of Engineering and Technology (TJET)

Worldwide, every day human beings generate millions of tons of Faecal Sludge (FS), which is rich in water, nutrients, energy, and organic compounds. Yet FS is not being managed in a way that permits us to derive value from its reuse, while at the same time, millions of farmers struggle with depleted soils and lack of water. In most of the developing countries, energy for cooking is mainly derived from cutting of trees, either as wood or charcoal. Resource recovery and reuse from FS can create livelihoods, enhance food security, support green economies, reduce waste and contribute to cost recovery …

Resource Allocation And Task Scheduling Optimization In Cloud-Based Content Delivery Networks With Edge Computing, Yang Peng

Operations Research and Engineering Management Theses and Dissertations

The extensive growth in adoption of mobile devices pushes global Internet protocol (IP) traffic to grow and content delivery network (CDN) will carry 72 percent of total Internet traffic by 2022, up from 56 percent in 2017. In this praxis, Interconnected Cache Edge (ICE) based on different public cloud infrastructures with multiple edge computing sites is considered to help CDN service providers (SPs) to maximize their operational profit. The problem of resource allocation and performance optimization is studied in order to maximize the cache hit ratio with available CDN capacity.

The considered problem is formulated as a multi-stage stochastic linear …

Research Methodology Adopted In Developing Tansse-L System, Ellen Kalinga

Tanzania Journal of Engineering and Technology (TJET)

Research methodology is among the very important part in a research work. It is the heart which describe the activities necessary for the completion of the research work. Research methodology provides a plan of investigation considered to obtain answers to research problems and it depends on the context of application. This paper presents the research methodology adopted when developing Tanzania Secondary Schools e-Learning (TanSSe-L) system, a learning management system (LMS) which was successfully developed through customization of Moodle open source LMS. TanSSe-L system is a context centered platform for secondary schools in Tanzania. TanSSe-L system was developed using a number …

Linking Quality Management Practices With Performance Of Manufacturing Industries In Tanzania, Mussa Iddi Mgwatu Dr.

Tanzania Journal of Engineering and Technology (TJET)

Local products of manufacturing industries in Tanzania are subjected to intense competition in the markets. Product quality is one of key factors that play a considerable role for manufacturing industries to win the competitive advantage. This paper attempts to analyse the extents of quality management practices (QMP) and manufacturing performance (MP) as well as to examine the linkage between practices and performance. Data was collected from seventy-eight (78) manufacturing industries in Dar es Salaam region using questionnaires comprising of both single-item and multi-item questions. Descriptive statistics was used to quantify the extent of quality management practices and manufacturing performance (MP) …

Development Of A Myoelectric Detection Circuit Platform For Computer Interface Applications, Nickolas Andrew Butler

Master's Theses

Personal computers and portable electronics continue to rapidly advance and integrate into our lives as tools that facilitate efficient communication and interaction with the outside world. Now with a multitude of different devices available, personal computers are accessible to a wider audience than ever before. To continue to expand and reach new users, novel user interface technologies have been developed, such as touch input and gyroscopic motion, in which enhanced control fidelity can be achieved. For users with limited-to-no use of their hands, or for those who seek additional means to intuitively use and command a computer, novel sensory systems …

Impact Of Communication Latency On The Bus Voltage Of Centrally Controlled Dc Microgrid During Islanding, Mahmoud Saleh, Yusef Esa, Ahmed Mohamed

Publications and Research

Maintaining a sustainable and reliable source of energy to supply critical loads within a renewable energy based microgrid (MG) during blackouts is directly related to its bus voltage variations. For example, voltage variation might trigger protection devices and disconnect DERs within the MG. Centrally controlled MGs (CCMGs) type is dependent on communication. Therefore, it is very important to analyze the impact of communication networks performance degradation, such as latency, on the bus voltage of CCMGs. This paper investigates the effect of wireless communication technologies latency on the bus voltage and performance of centralized DC MGs. Two mathematical models were developed …

Applications Of Complex Network Analysis In Electric Power Systems, Mahmoud Saleh, Yusef Esa, Ahmed Mohamed

Publications and Research

This paper provides a review of the research conducted on complex network analysis (CNA) in electric power systems. Moreover, a new approach is presented to find optimal locations for microgrids (MGs) in electric distribution systems (EDS) utilizing complex network analysis. The optimal placement in this paper points to the location that will result in enhanced grid resilience, reduced power losses and line loading, better voltage stability, and a supply to critical loads during a blackout. The criteria used to point out the optimal placement of the MGs were predicated on the centrality analysis selected from the complex network theory, the …

Implementing A Total Productive Maintenance Approach Into An Improvement At S Company, Xiaomeng Sun

Masters Theses & Specialist Projects

The study improved the overall equipment effectiveness (OEE) of machines and processes through the implementation of a total productive maintenance (TPM) approach at Company S over a three-month period. By comparing the OEE of equipment before and after the implementation of autonomous maintenance, this study concluded that autonomous maintenance improves OEE. The target of this study was one general product line at a polytetrafluoroethylene (PTFE) plant. Due to time limitations, the study only applied autonomous maintenance to operational activities. This research involved machine and processes selection, condition assessment, baseline OEE assessment, operator training, execution of autonomous maintenance, and OEE measurement. …

Collaborative Appearance-Based Place Recognition And Improving Place Recognition Using Detection Of Dynamic Objects, Juan Pablo Munoz

Dissertations, Theses, and Capstone Projects

This dissertation makes contributions to the problem of Long-Term Appearance-Based Place Recognition. We present a framework for place recognition in a collaborative scheme and a method to reduce the impact of dynamic objects on place representations. We demonstrate our findings using a state-of-the-art place recognition approach.

We begin in Part I by describing the general problem of place recognition and its importance in applications where accurate localization is crucial. We discuss feature detection and description and also explain the functioning of several place recognition frameworks.

In Part II, we present a novel framework for collaboration between agents from a pure …

Communication Based Control For Dc Microgrids, Mahmoud S. Saleh, Yusef Esa, Ahmed Mohamed

Publications and Research

Centralized communication-based control is one of the main methods that can be implemented to achieve autonomous advanced energy management capabilities in DC microgrids. However, its major limitation is the fact that communication bandwidth and computation resources are limited in practical applications. This can be often improved by avoiding redundant communications and complex computations. In this paper, an autonomous communication-based hybrid state/event driven control scheme is proposed. This control scheme is hierarchical and heuristic, such that on the primary control level, it encompasses state-driven local controllers, and on the secondary control level, an event-driven MG centralized controller (MGCC) is used. This …

Anomaly Inference Based On Heterogeneous Data Sources In An Electrical Distribution System, Yachen Tang

Dissertations, Master's Theses and Master's Reports

Harnessing the heterogeneous data sets would improve system observability. While the current metering infrastructure in distribution network has been utilized for the operational purpose to tackle abnormal events, such as weather-related disturbance, the new normal we face today can be at a greater magnitude. Strengthening the inter-dependencies as well as incorporating new crowd-sourced information can enhance operational aspects such as system reconfigurability under extreme conditions. Such resilience is crucial to the recovery of any catastrophic events. In this dissertation, it is focused on the anomaly of potential foul play within an electrical distribution system, both primary and secondary networks as …

Application Of Real Field Connected Vehicle Data For Aggressive Driving Identification On Horizontal Curves, Arash Jahangiri, Vincent Berardi, Sahar Ghanipoor Machiani

Psychology Faculty Articles and Research

The emerging technology of connected vehicles generates a vast amount of data that could be used to enhance roadway safety. In this paper, we focused on safety applications of a real field connected vehicle data on a horizontal curve. The database contains connected vehicle data that were collected on public roads in Ann Arbor, Michigan with instrumented vehicles. Horizontal curve negotiations are associated with a great number of accidents, which are mainly attributed to driving errors. Aggressive/risky driving is a contributing factor to the high rate of crashes on horizontal curves. Using basic safety message data in connected vehicle data …

Quantitative Analysis Of Regenerative Energy In Electric Rail Traction Systems, Mahmoud Saleh, Oindrilla Dutta, Yusef Esa, Ahmed Mohamed

Publications and Research

This paper aims at determining the influential factors affecting regenerative braking energy in DC rail transit systems. This has been achieved by quantitatively evaluating the dependence of regenerative energy on various parameters, such as vehicle dynamics, train scheduling, ground inclination and efficiency of the electrical devices. The recuperated power and energy have been presented by a mathematical model, comprising of a set of empirical forms, which allows for thorough analysis. A detailed simulation model of a typical DC-traction system has been developed to validate the developed empirical forms. The results verified the validity of the proposed mathematical model, and demonstrated …

An Exact Analysis For Four-Order Acousto-Optic Bragg Diffraction Which Incorporates Both Incident Light Angle And Sound Frequency Dependencies, Adeyinka Sunday Ademola

Electrical Engineering Theses

This thesis extends the prior work which produced an exact solution to the four-order acousto-optic (AO) Bragg cell with assumed fixed center frequency and with exact Bragg angle incident light. The extension predicts the model that incorporates the dependencies of both the input angle of light and the sound frequency. Specifically, a generalized 4^th order linear differential equation (DE), is developed from a simultaneous analysis of four coupled AO system of DEs. Through standard methods, the characteristic roots, which requires solving a quartic equation, is produced. Subsequently, a derived system of homogeneous solutions, which absorbs the roots obtained using …

Target Read Operation Of Passive Ultra High Frequency Rfid Tag In A Multiple Tags Environment, Zi Qin Phua

Theses and Dissertations--Mechanical and Aerospace Engineering

Passive ultra-high frequency (UHF) radio frequency Identification (RFID) has emerged as a promising solution for many industrial applications. Passive UHF systems are relatively inexpensive to implement and monitor, as no line of sight is required for the communication. There are several advantages to using a passive RFID system. For example, no internal power source is required to activate the tags, and lower labor costs and efficient multitasking operations are expected in a long term scenario. However, due to factors such as tag-to-tag interference and inaccurate localization, RFID tags that are closely spaced together are difficult to detect and program accurately …

Experimental Investigation Of Reading Passive Uhf Tags In A Multi-Tag Environment, Yi Zhou

Theses and Dissertations--Mechanical and Aerospace Engineering

Recently, the Internet of things (IoT) has emerged as a promising solution for several industrial applications. One of the key components in IoT is passive radio frequency identification (RFID) tags which do not require a power source for operations. Specifically, ultra-high frequency (UHF) tags are studied in this paper. However, due to factors such as tag-to-tag interference and inaccurate localization, RFID tags that are closely spaced together are difficult to detect and program accurately with unique identifiers. This thesis investigates several factors that affect the ability to encode a specific tag with unique information in the presence of other tags, …

Impact Of Clustering Microgrids On Their Stability And Resilience During Blackouts, Mahmoud S. Saleh, Ammar Althaibani, Yusef Esa, Yassine Mhandi, Ahmed Mohamed

Publications and Research

In this paper, the impact of clustering multiple microgrids during blackouts, on their stability and supply availability, will be investigated. Microgrids have the capability of satisfying their emergency loads during blackouts. However, distributed energy resources (DERs)-dominated microgrids are affected by the uncertainty of their input energy supply, e.g. impact of solar irradiance on photovoltaic (PV) output. Moreover, an individual islanded microgrid is prone to instability issues due to large sudden load/generation changes. In order to increase the supply security, and enhance system stability, we propose to use the existing distribution grid infrastructure, if applicable, during blackouts to form microgrid clusters. …

Development Of A Habitat Monitoring System For Simulated Mars Missions, Rebecca Demarco

Human Factors and Applied Psychology Student Conference

The developers for the Habitat Monitoring System (HMS) for the Mobile Extreme Environment Research Station (MEERS) Mission Control System (MCS) faced challenges in the design and implementation of their human machine interface. Designing a human machine interface for a diverse group of end users presents technical and design challenges for the developers. By applying human factors concepts and following the engineering process, the development team was able to produce a human machine interface that met the product requirements and satisfied their product owners. This presentation discusses the process used by the development team to create the interface for the Habitat …

Creation And Implementation Of An Underwater-Capable Vr Headset Through The Use Of Additive Manufacturing, Matthew D. Meyers, Nathan Sonnenfeld

Human Factors and Applied Psychology Student Conference

No abstract provided.

Human Factors In The Development Of The Mobile Extreme Environment Research Station (Meers) Mission Control System (Mcs), Rebecca Demarco

Human Factors and Applied Psychology Student Conference

The developers for the MEERS MCS were required to develop a novel interface for their product. During the development of the MCS, analytical human factors methods and display principles were implemented to create the user interface. The methods and principles were also used so the MCS had a user centered design. The MCS went through several iterations of design. This presentation discusses the development process of the MEERS MCS from a human factors standpoint.