Systems and Communications Commons^™

Plc Course Development, Leonard Hernandez, Jacqueline Grace Radding

Electrical Engineering

The goal of this project is to design and construct the first lab experiment for the newly developed EE435 laboratory course. The experiment entails PLC programming to automate LED lighting in a simulated building. Starting with why PLCs are used, how to use the interface of EcoStruxure Control Expert V15.0 and practice using logic to control the dimming of a Light Emitting Diode (LED) to sustain a certain number of lumens consistent in a zone. Through the lab manual developed in this project, students will gain experience of creating logic designs using Function Block Diagram (FBD) and learn the layout …

Tank Level Controller Plc Lab, Siddhi Upadhyaya, Teghvir Grewal

Electrical Engineering

The California Polytechnic State University San Luis Obispo’s Electrical Engineering Department is currently developing lab experiments for the new EE435 (Industrial Power Control and Automation) class. In order to support these efforts, fourth year Cal Poly students are expected to develop laboratory experiments that will be conducted during this new class for the semester system. The lab experiment focused on in this project is called the Tank Level Controller. This experiment will introduce EE 435 students to Schneider Electric Programmable Logic Controller (PLC) hardware and software, which is prominent in the automation industry.
This experiment will require students to develop …

Cybersecurity In Industrial Automation Lab Design For Ee 435, Jules Khalil Emile Hajjar, Emily Zhou

Electrical Engineering

This project involves the creation of an instructional laboratory aimed at teaching cybersecurity for industrial automation applications. Specifically tailored for Electrical Engineering students at Cal Poly, the experiment focuses on configuring the Modicon M580, a PLC from Schneider Electric, and serves to introduce students to relevant cybersecurity protocols and techniques. This project will be implemented into the EE435 (Industrial Power Control and Automation) course curriculum upon Cal Poly’s transition to the semester system.

Chatgpt As Metamorphosis Designer For The Future Of Artificial Intelligence (Ai): A Conceptual Investigation, Amarjit Kumar Singh (Library Assistant), Dr. Pankaj Mathur (Deputy Librarian)

Library Philosophy and Practice (e-journal)

Abstract

Purpose: The purpose of this research paper is to explore ChatGPT’s potential as an innovative designer tool for the future development of artificial intelligence. Specifically, this conceptual investigation aims to analyze ChatGPT’s capabilities as a tool for designing and developing near about human intelligent systems for futuristic used and developed in the field of Artificial Intelligence (AI). Also with the helps of this paper, researchers are analyzed the strengths and weaknesses of ChatGPT as a tool, and identify possible areas for improvement in its development and implementation. This investigation focused on the various features and functions of ChatGPT that …

Design Of Control Logic And The Human-Machine Interface For A Demonstration Plant Growth Chamber Implemented On A Programmable Logic Controller, Rachael Koehler

Biological and Agricultural Engineering Undergraduate Honors Theses

This honors thesis covers the planning, development, and implementation of system controls and human-machine interface (HMI) for a demonstration plant growth chamber. The work is a continuation of an ongoing project to be used as an educational and recruiting tool manifesting the skills acquired from the Biological and Agricultural Engineering Department at the University of Arkansas’ College of Engineering. This work includes emergency controls, overall design interface, and controls for both the aeration and lighting subsystems of the growth chamber. Overall design interface controls established included development of two user modes, Administrator and Visitor. The Administrator user will have full …

Integration Of Robotic And Electro-Pneumatic Systems Using Advanced Control And Communication Schemes, Chinmay Kondekar

Dissertations, Master's Theses and Master's Reports

Modern industrial automation systems are designed by interconnecting various subsystems which work together to perform a process. The thesis project aims to integrate fragmented subsystems into a flexible and reconfigurable system through advanced communication protocols and perform a process to demonstrate the effectiveness of interconnected systems.

The system consists of three six-axis robots, one electro-pneumatic robot, and two conveyors connected using EthernetIP communication and hardwired connections. The interconnected system works together to perform machining of a workpiece using advanced control methods of CAD to robot path generation, central control through a PLC, and process control through HMI.

Standardized programming blocks …

Upgrading Of A Data Communication And Computer Networks Course In Engineering Technology Program, Murat Kuzlu, Otilia Popescu

Engineering Technology Faculty Publications

Data network communications is traditionally a course offered by computer engineering technology curricula, with the primary objective to introduce to the fundamental concepts in data communication and computer networks, as well as some level of hands-on component related to this area. Typical topics in such courses are the layered model of data communication, specifically the OSI seven-layered model, Internet routing, communication standards, protocols and technologies, and learning methods used to design the network and send data over the network in a secure manner. In the last decades, the data communication and applications have grown and become ubiquitous in both industry …

Matlab Gui Based Educational Simulation Tool Box For Power Analysis, Tharuka Senevirathne

All Graduate Theses, Dissertations, and Other Capstone Projects

One of the most important and complex tasks in power engineering is the analysis of power systems under fault conditions. The detection and analysis of these faults are important to guarantee that the dependability and stability of the power system does not decline as a result of a critical event such as a fault. This thesis will conduct research on how a power system under fault conditions behaves and will examine the various scenarios of faults such as three-phase, single line-to-ground, line-to-line, and double line-to-ground faults. A simplified method based on symmetrical components is used to construct the mathematical models …

Study Of Physical Layer Security And Teaching Methods In Wireless Communications, Zhijian Xie, Christopher Horne

KSU Proceedings on Cybersecurity Education, Research and Practice

In most wireless channels, the signals propagate in all directions. For the communication between Alice and Bob, an Eavesdropper can receive the signals from both Alice and Bob as far as the Eavesdropper is in the range determined by the transmitting power. Through phased array antenna with beam tracking circuits or cooperative iteration, the signals are confined near the straight line connecting the positions of Alice and Bob, so it will largely reduce the valid placement of an Eavesdropper. Sometimes, this reduction can be prohibitive for Eavesdropper to wiretap the channel since the reduced space can be readily protected. Two …

University Of Maine High Altitude Ballooning Eclipse Experience, Kent Seneres, Derek Haas, William Bessette, Richard Eason

2017 Academic High Altitude Conference

The University of Maine High Altitude Ballooning (UMHAB) team launched two balloons during the August 21, 2017 total solar eclipse, producing a consistent online video stream of the eclipse to an altitude of 110,000 feet. This paper discusses the key factors that lead to a successful launch and recovery, such as thorough testing procedures, redesign of components, choice of launch site, and a touch of luck. In preparation for the event, the team tested the equipment and code over eleven balloon launches. Airplane based testing and land testing were conducted for the tracking and video stream components. The payloads and …

Industry-University Collaboration: A University Of Dayton Model, Guru Subramanyam

Guru Subramanyam

This paper introduces industry-university collaboration activities currently in place at the University of Dayton's School of Engineering. These collaborations are important to prepare industry-ready graduates who excel in technical, entrepreneurial, and leadership skills. One of the key curricular components is the industry-sponsored multidisciplinary projects. Industry involvement in advisory committee, strategic research partnerships, and other forms are discussed.

Industry-University Collaboration: A University Of Dayton Model, Guru Subramanyam

Electrical and Computer Engineering Faculty Publications

This paper introduces industry-university collaboration activities currently in place at the University of Dayton's School of Engineering. These collaborations are important to prepare industry-ready graduates who excel in technical, entrepreneurial, and leadership skills. One of the key curricular components is the industry-sponsored multidisciplinary projects. Industry involvement in advisory committee, strategic research partnerships, and other forms are discussed.

Wireless Transmission Network : A Imagine, Radhey Shyam Meena Engineer, Neeraj Kumar Garg Asst.Prof

Radhey Shyam Meena

World cannot be imagined without electrical power. Generally the power is transmitted through transmission networks. This paper describes an original idea to eradicate the hazardous usage of electrical wires which involve lot of confusion in particularly organizing them. Imagine a future in which wireless power transfer is feasible: cell phones, household robots, mp3 players, laptop computers and other portable electronic devices capable of charging themselves without ever being plugged in freeing us from that final ubiquitous power wire. This paper includes the techniques of transmitting power without using wires with an efficiency of about 95% with non-radioactivemethods. In this paper …

Battery Energy Storage System In Solar Power Generation, Radhey Shyam Meena Er., Deepa Sharma

Radhey Shyam Meena

Grid-connected solar PV dramatically changes the load profile of an electric utility customer. The expected widespread adoption of solar generation by customers on the distribution system poses significant challenges to system operators both in transient and steady state operation, from issues including voltage swings, sudden weather-induced changes in generation, and legacy protective devices designed with one-way power flow in mind

Battery Energy Storage System In Solar Power Generation, Radhey Shyam Meena Er.

Radhey Shyam Meena

As solar photovoltaic power generation becomes more commonplace, the inherent intermittency of the solar resource poses one of the great challenges to those who would design and implement the next generation smart grid. Specifically, grid-tied solar power generation is a distributed resource whose output can change extremely rapidly, resulting in many issues for the distribution system operator with a large quantity of installed photovoltaic devices. Battery energy storage systems are increasingly being used to help integrate solar power into the grid. These systems are capable of absorbing and delivering both real and reactive power with sub-second response times. With these …

At The Tone, The Time Will Be... Unknown – A Perspective On The Evolution Of Time In Telecommunications, Robert Iannucci

Robert A Iannucci

No abstract provided.

Switch Yard Operation In Thermal Power Plant(Katpp Jhalawar Rajasthan), Radhey Shyam Meena Er.

Radhey Shyam Meena

Switchyard Provides the facilities for switching ,protection & Control of electric power. To handle high Voltage power with proper Safety measures. To isolate the noises coming from the grid with true 50Hz power SWITCH YARD IS IMPORTANT PART IN THERMAL PLANT. IN KALISINDH THERMAL 400KV AND 220KV SWITCH YARD LOCATED.

Embedded Systems As Datacenters, Robert Iannucci

Robert A Iannucci

No abstract provided.

Platform Thinking In Embedded Systems, Robert Iannucci

Robert A Iannucci

No abstract provided.

Configuring Client Software Using Remote Notification Us:6219698, Robert Iannucci, Chris Weikart

Robert A Iannucci

No abstract provided.

Computer System For Simulating Physical Processes Using Multiple Integer State Vectors Us:5594671, Hudong Chen, Peter Churchill, Robert Iannucci, Kim Molvig, Gregory Papadopoulos, Stephen Remondi, Christopher Teixeira, Kenneth Traub

Robert A Iannucci

No abstract provided.

System For Synchronizing Execution By A Processing Element Of Threads Within A Process Using A State Indicator Us:5553305, Robert Iannucci, Steven Gregor

Robert A Iannucci

No abstract provided.

Multithreaded Computer Architecture: A Summary Of The State Of The Art, Robert Iannucci, Guang Gao, Robert Halstead, Burton Smith

Robert A Iannucci

No abstract provided.

High Performance Memory System Pct:Ep0199134, Robert Iannucci

Robert A Iannucci

No abstract provided.

Parallel Machines: Parallel Machine Languages, Robert Iannucci

Robert A Iannucci

No abstract provided.

Method And Apparatus For Division Pct:Ep0075745, Robert Iannucci, James Kleinsteiber

Robert A Iannucci

No abstract provided.

High Performance Memory System Utilizing Pipelining Techniques Us:4685088, Robert Iannucci

Robert A Iannucci

No abstract provided.

Method And Apparatus For Division Employing Associative Memory Us:4466077, Robert Iannucci, James Kleinsteiber

Robert A Iannucci

No abstract provided.