Power and Energy Commons^™

Solar Irradiance Microforecasting, Austin Jeffrey Fite, Sara Naseem Kipps

Computer Engineering

In late winter quarter 2018 the University of New Mexico and Microgrid Labs provided the Cal Poly Electrical Engineering department with their prototype Solar Irradiance Microforecasting (SIMF) hardware. This hardware was provided to the University under the lone condition that data collected with it would be returned to Microgrid Labs to train their weather model. The goal of this senior project was to take the provided hardware and software and make it usable for students in the Cal Poly Electrical and Computer Engineering departments to hack and expand. The end goal with the hardware is near term cloud and weather …

Dc House Solar Panel Cleaner, Sarahanne Heredia, Sophia Deguia

Electrical Engineering

Solar panels lose 0.05% of their power conversion efficiency per day due to soil accumulation, according to an experiment conducted by the University of California, San Diego in 2013 [18]. The project is an electro-mechanical cleaning system that effectively and efficiently cleans solar panels at set intervals. A drip irrigation system with spray jets was attached to a water pump and Arduino, both powered by the DC House Project solar panel battery. The DC House solar panel was the targeted panel set up for the project. Several components of the design could have been chosen more optimally for the system; …

Developing A 1-Megawatt Photovoltaic Power Plant For Liberty University, Andrew Knudsen

Senior Honors Theses

A photovoltaic power plant with a generation capacity of 1-megawatt is designed for Liberty University. Liberty University’s location and size are stated to provide context for the design. Design choices are presented, first with general information that is applicable to any photovoltaic plant design, then with significant factors that impact this design. Specific models of solar panels and inverters are selected after the necessary classifications are determined. The final design has 2,880 solar panels with a fixed angle 30⁰ above the horizon, has two central inverters, and takes up 2.57 acres. Future research is suggested for finances as well as …

Dc-To-Dc Buck Converter, Kyle Christopher Roman

Electrical Engineering

The growth of sustainable energy requires many components to work in harmony creating one efficient and effective system. Sustainable energy generation that produces a DC current varying in voltage requires a subsystem to convert voltage to a practical and usable value. The DC to DC Buck converter converts high DC solar generated voltage to a 12V output. This Modular -Level power electronic (MLPE) device performs as a solar charge controller for small lithium ion batteries. Fluctuating voltage levels generated by Photovoltaic cells makes the solar controller a critical part of the solar system. Regulating the DC voltage allows safe and …

Solar Powered Single-Axis Heliostat Active Solar Tracking Device, Mason Kyle Roberts

Physics

As a means of cooking food, the burning of biomass accounts for over 4 million premature deaths in third world countries (“Household Air Pollution and Health”). The focus of this project was to explore an alternative that could utilize focused sunlight to cook food. A solar tracker was designed to be affixed to a parabolic, reflective, tilted single axis heliostat to follow the sun throughout the day and focus the reflected light to the bottom of a cooking surface. This surface became hot enough to for the preparation of food or boiling/sterilization of water.

A goal for each project was …

Dc House Energy Management System, Zachary L. Eldredge, Zoe M. Hay

Electrical Engineering

In this work, a previously completed proof of concept for an Energy Management System (EMS) for the DC House project has been revised and re-implemented. The implemented design changes will improve the performance and reproducibility of the system. This new design of the EMS replaces the two-separate buck and boost DC-DC converters with a single bidirectional DC-DC converter to reduce components and improve efficiency. Analysis of the bidirectional DC-DC converter shows high efficiency especially at larger load currents. The code of the previous work was updated for smoother operation as well as to accommodate an LCD capable of displaying more …

Solar Powered Electric Vehicle Charger, Jessica A. Bombardier Shaw, Andrew F. Moradpour

Electrical Engineering

This project will look into how to create an efficiently-operated solar powered electric vehicle charger. The solar panel will harvest energy from the sun that will be stored a battery pack to be readily available to charge an electric vehicle. These stations could be commercialized to be located along a highway, or personalized for a in-house installation.

Solar Roller - Solar Powered Usb Charging Station, Aaron Bartfeld, Tanner Mjelde, Kaylan Naicker

Electrical Engineering

As the necessity for renewable energy increases, solar power becomes more and more prevalent. At the same time, as technology increases, the necessity for charging one’s electronic devices also increases. The Solar Roller merges solar energy with the ability to charge one's electronic device in one compact cart. The Solar Roller is a solar-powered USB charging station that allows people of all backgrounds to develop a better understanding of alternative fuels, while charging their USB device. It has a touch screen display that provides voltage levels of the battery as well as a TV that displays solar powered information. The …

Smart Home Energy Management: An Analysis Of A Novel Dynamic Pricing And Demand Response Aware Control Algorithm For Households With Distributed Renewable Energy Generation And Storage, Jamal Abushnaf

Theses: Doctorates and Masters

Home energy management systems (HEMS) technology can provide a smart and efficient way of optimising energy usage in residential buildings. One of the main goals of the Smart Grid is to achieve Demand Response (DR) by increasing end users’ participation in decision making and increasing the level of awareness that will lead them to manage their energy consumption in an efficient way. This research presents an intelligent HEMS algorithm that manages and controls a range of household appliances with different demand response (DR) limits in an automated way without requiring consumer intervention. In addition, a novel Multiple Users and Load …

Photovoltaic Cooking In The Developing World, Tyler Watkins, Christopher O'Day, Omar Arriaga

Mechanical Engineering

The challenge of clean cooking is faced by hundreds of millions of people worldwide. We present a cooking technology consisting of a solar panel directly connected to an electric heater in a well-insulated chamber. Assuming continued decrease in solar panel prices, we anticipate that in a few decades Solar Electric Cooking technologies will be the most common cooking technology for the poor. Appropriate use of insulation reduces the power demand making low-power Insulated Solar Electric Cooking systems already cost competitive.

Simulation, Measurement, And Emulation Of Photovoltaic Modules Using High Frequency And High Power Density Power Electronic Circuits, Yunas Erkaya

Electrical & Computer Engineering Theses & Dissertations

The number of solar photovoltaic (PV) installations is growing exponentially, and to improve the energy yield and the efficiency of PV systems, it is necessary to have correct methods for simulation, measurement, and emulation. PV systems can be simulated using PV models for different configurations and technologies of PV modules. Additionally, different environmental conditions of solar irradiance, temperature, and partial shading can be incorporated in the model to accurately simulate PV systems for any given condition.

The electrical measurement of PV systems both prior to and after making electrical connections is important for attaining high efficiency and reliability. Measuring PV …

Solar Generation's Impact On Fault Current, Kody Heppner

Electrical Engineering

California is paving the road for other states with the capacity of solar installations for residential and commercial entities. The added capacity of solar generation to the state's electric grid has an impact on power flow and fault currents. This project looks at the impact of solar installations on fault currents. Feeders with added residential rooftop solar and larger commercial solar installations may impact the system differently than a large, utility-sized solar installation. This project looks at the impact of both cases on the magnitude of fault current during many different fault types and locations that can occur within a …

Solar-Powered Hot Tub, Jonathan Peterson, Anthony Zepeda

Electrical Engineering

This paper discusses the design and implementation of a solar-powered hot tub. The concept of this project was to design an independently-operated hot tub powered by a 12V rechargeable battery, charged during the day by a single 400W solar panel. For this purpose, a twenty-year-old name-brand hot tub was purchased, in used condition. The plumbing, AC electrical wiring, and mechanical pumps were all removed and replaced with new components to meet our design specifications. Additionally, a solar water-heater was designed and integrated into the system to directly apply the sun’s heat to water pumped in and out of the tub, …

Renewable Energy In Industrial Applications, Seshi Reddy Kasu

Dissertations, Theses and Capstone Projects (Full IR Collection)

Manufacturing industry accounts for about one third of total energy use worldwide. Roughly three quarters of industrial energy use is related to the production of energy-intensive commodities such as ferrous and non-ferrous metals, chemicals and petrochemicals, non-metallic mineral materials, and pulp and paper. In these sectors, energy costs constitute a large proportion of total production costs, so managers pay particular attention to driving them down. As a result, the scope to improve energy efficiency tends to be less in these most energy intensive sectors than in those sectors where energy costs form a smaller proportion of total costs, such as …

Minimizing Sheet Resistance Of Organic Photovoltaic Cell Top Contact Electrode Layer: Silver Nanowire Concentration Vs. Conductive Polymer Doping Concentration, Caitlyn Cook

Materials Engineering

The top contact electrode layers of nine organic photovoltaic cells were prepared with two varying factors: three Silver nanowire (AgNW) densities deposited on a conductive polymer doped with three concentrations. Silver’s low sheet resistance of 20-Ω/sq is hypothesized to lower the sheet resistance of the anode layer and thus enhance the overall efficiency of the cell. Four-point probe measurements indicated that increasing AgNW density in the top contact electrode layer of an organic photovoltaic cell significantly reduces sheet resistance from 52.2k-Ω/sq to 18.0 Ω/sq. Although an increase in doping concentration of the conductive polymer reduced sheet resistance in low AgNW …

Hybrid Fuzzy-Pid Controller For Buck-Boost Converter In Solar Energy-Battery Systems, Karime Farhood Hussein

Masters Theses

In the present work, we propose a hybrid fuzzy PID control system to prevent overshoot and oscillations in DC-DC buck-boost converter for solar-battery system. We design and simulate a PID, a Fuzzy logic controller, and hybrid fuzzy PID control system to stabilize the output voltage of the buck-boost converter. The performance results using dynamic response of all of these controllers in terms of rise time, overshoot, peak time, and voltage oscillation are presented. The simulation results support the validity and advantages of the hybrid method.

Stand-Alone Solar-Pv Hydrogen Energy Systems Incorporating Reverse Osmosis, Daniel Clarke

Theses: Doctorates and Masters

The world’s increasing energy demand means the rate at which fossil fuels are consumed has increased resulting in greater carbon dioxide emissions. For many small (marginalised) or coastal communities, access to potable water is limited alongside good availability of renewable energy sources (solar or wind). One solution is to utilise small-scale renewably powered stand-alone energy systems to help supply power for everyday utilities and to operate desalination systems serving potable water (drinking) needs reducing diesel generator dependence. In such systems, on-site water production is essential so as to service electrolysis for hydrogen generation for Proton Exchange Membrane (PEM) fuel cells. …

Life Cycle Assessment Projection Of Photovoltaic Cells: A Case Study On Energy Demand Of Quantum Wire Based Photovoltaic Technology Research, Shilpi Mukherjee

Graduate Theses and Dissertations

With increasing clean-energy demand, photovoltaic (PV) technologies have gained attention as potential long-term alternative to fossil fuel energy. However, PV research and manufacture still utilize fossil fuel-powered grid electricity. With continuous enhancement of solar conversion efficiency, it is imperative to assess whether overall life cycle efficiency is also being enhanced. Many new-material PV technologies are still in their research phase, and life cycle analyses of these technologies have not yet been performed. For best results, grid dependency must be minimized for PV research, and this can be accomplished by an analytical instrument called Life Cycle Assessment (LCA).

LCA is the …

Solar Power Deployment: Forecasting And Planning, Mohana Shandal Alanazi

Electronic Theses and Dissertations

The rapid growth of Photovoltaic (PV) technology has been very visible over the past decade. Recently, the penetration of PV plants to the existing grid has significantly increased. Such increase in the integration of solar energy has brought attention to the solar irradiance forecasting. This thesis presents a thorough research of PV technology, how solar power can be forecasted, and PV planning under uncertainty.

Over the last decade, the PV was one of the fastest growing renewable energy technologies. However, the PV system output varies based on weather conditions. Due to the variability and the uncertainty of solar power, the …

All Purpose Mobile Gps, James C. Smith, Matt Weege, Kevin Peters

Electrical Engineering

The aim of the All Purpose Mobile GPS (The System) is to create a GPS tracking device that can accurately record location and calculate velocity, distance traveled and elevation change even when the satellite signal is lost. This data can later overlay on existing internet-based maps illustrating a trip to oneself or others. The portable tracker consumes very little power achieving several days’ worth of power in a single charge. A solar cell provides a quick battery boost in a pinch. SD Card storage increases compatibility with computers and other forms of data transfer. Data processing, such as viewing the …

Off Grid Solar Powered Street Light, Justin Fang, Billy Pham

Electrical Engineering

Street lights are fixtures found in every city and serve the important purpose of illuminating the streets and keeping the roads safe for pedestrians and drivers. Current street lights are powered by the grid, power which is paid for by the taxpayers and could have been used to power homes instead. With this project, our goal is to design and implement an electric power system that collects and stores solar energy, and delivers power to an LED smart street light. The resulting system would reduce street light energy costs by 100% since they would not draw any power from the …

Impact Of Photovoltaic System Penetration On The Operation Of Voltage Regulator Equipment, Abesh Sorab Mubaraki

Master's Theses

The growing popularity of photovoltaic (PV) generation systems leads to an increase in the number of residential and commercial grid-tied PV systems that interconnect to the distribution circuit. This affects the characteristics of the distribution circuit; for example, the assumption that the voltage profile of a radial line decreases down-stream becomes invalid because of the addition of the PV system on the line. This poses new challenges when setting the parameters of voltage regulating devices. Add to that the fact that PV systems are intermittent, especially on cloudy days, which make the line even more difficult to regulate, and the …

Performance And Cost Analysis Of A Structured Concrete Thermocline Thermal Energy Storage System, Matt Nicholas Strasser

Graduate Theses and Dissertations

Increasing global energy demands and diminishing fossil fuel resources have raised increased interest in harvesting renewable energy resources. Solar energy is a promising candidate, as sufficient irradiance is incident to the Earth to supply the energy demands of all of its inhabitants. At the utility scale, concentrating solar power (CSP) plants provide the most cost-efficient method of harnessing solar energy for conversion to electrical energy. A major roadblock to the large-scale implementation of CSP plants is the lack of thermal energy storage (TES) that would allow the continued production of electricity during the absence of constant irradiance. Sensible heat TES …

Slides: Appropriate Sustainable Energy Technologies: A Light To The World, Lakshman D. Guruswamy, Jason B. Aamodt, Blake Feamster

2012 Energy Justice Conference and Technology Exposition (September 17-18)

Presenter: Jason Aamodt, Attorney; Adjunct Professor, University of Tulsa

15 slides

Solar Light Bulb, David G. Guzman, Virgilio Gonzalez

COURI Symposium Abstracts, Summer 2012

The Solar Lighting project is a work driven towards building a low-cost and environmental-friendly solar bulb and to understanding the science behind its behavior. A solar light bulb refers to a device capable of absorbing and transferring solar energy to light up an enclosed area. By using the physical properties of fluids and light is possible to manipulate solar light waves to illuminate an enclosed structure. Moreover, this project attempts to utilize recycled materials that reduce the cost of such device, helping not only the planet but also the costumer’s pocket. The ultimate goal for this project is to scientifically …

Agenda: A Low-Carbon Energy Blueprint For The American West, University Of Colorado Boulder. Natural Resources Law Center, University Of Colorado Boulder. Renewable And Sustainable Energy Institute, Western Resource Advocates, Rocky Mountain Research Station (Fort Collins, Colo.)

A Low-Carbon Energy Blueprint for the American West (Martz Summer Conference, June 6-8)

The future of the planet may depend upon our ability to increase energy supplies even as we reduce carbon emissions. This conference will address how a low-carbon energy program might evolve with a particular focus on the American West. It will focus on the future of energy in the West--on a “managed transition” to a different energy mix, on the need to nest this effort in a framework that acknowledges interconnections, and on identifying the most salient opportunities to consider the legal, political, financial, and technical challenges.

Solar Powered Led Lantern For Developing Countries, Lacy Billingsly Iii

Electrical Engineering

In recent years, both LED and solar technology have become the focus of sustainable energy. LED lighting uses significantly less power than its fluorescent competitor. Solar cells enable clean, natural, and portable power. As these two entities become more efficient at exponential rates, the hope for the wide use of off-grid lighting in less developed countries seemingly increases at the same rate. Currently, there has been a development of industry for portable solar powered lighting systems. Before designing a product, a study was conducted of current products on the market that aim to light dark homes. This study and design …

Multipolymer Interactions In Bulk Heterojunction Photovoltaic Devices, Grant Olson

Physics

Multipolymer photovoltaics, single layer devices made up of multiple photoactive polymers, can create organic photovoltaics (OPVs) with a wider spectral response than single polymer systems without the difficult fabrication of a tandem. Our group has successfully created multipolymer solar devices with 2% power conversion efficiency. We have analyzed the optical and electrical properties of these devices, and found that it may be possible for polymers to assist each other with charge extraction, though combining polymers disrupts single polymer crystallinity.

Modeling And Analysis Of A Photovoltaic System With A Distributed Energy Storage System, Anthony Winston Ma

Master's Theses

As California continues to integrate more renewable energy into its electrical system, the state has experienced a corresponding rise in photovoltaic system installations. PV arrays are a unique source of power generation in that they are affected by the location of the sun, shading, and temperature changes. These characteristics make solar one of the most highly variable forms of renewable energy. In order to improve solar power’s consistency, PV systems require a supplemental source of power. The primary focus of this paper is to determine if distributed energy storage systems can be used to reduce the effect of solar intermittency. …

Dynamic Modelling Of Single Phase Grid Connected Photovoltaic System, Gopi Krishna Ari

UNLV Theses, Dissertations, Professional Papers, and Capstones

Grid-connected photovoltaic (PV) power systems have been sustaining an exponential growth rate during the past decade. This steep growth is driven by a growing concern about climate change, the adoption of an aggressive regional renewable portfolio standard, rebates and tax incentives, and reduction in PV system cost. One of the main technical barriers that can ultimately limit further PV penetration is the fast variations in the PV system's output power induced by cloud transients. Such events are known to cause voltage fluctuations which may lead to excessive operations of voltage regulation equipment and light flickering.

Solar irradiance variability, which can …