Power and Energy Commons^™

Pseudo-Soft-Switching Switched-Capacitor Drive Circuits For Small-Scale Dielectric Actuators, Yanqiao Li

Dartmouth College Ph.D Dissertations

Applications including micro-robotics and haptics have motivated extensive exploration of dielectric actuators due to their high bandwidth and high efficiency at cm and mm scales. To maximize their benefits, dielectric actuators, including piezoelectric and electrostatic actuators, typically require high driving voltages, ranging from 100V to several kV. Generating such high driving voltages presents a challenge for drive circuits, particularly when powered by a small battery. Dielectric actuators are predominantly capacitive in most circumstances, necessitating the drive circuits to deliver and recover reactive energy for efficient operation. In some applications, such as micro-robotics, the drive circuits may need to have a …

Data-Driven Koopman Theory For Transient Stability And Safety Analysis Of Power Systems With Renewable Penetration, Bhagyashree Umathe

All Dissertations

This dissertation presents a novel approach to analyzing and controlling nonlinear systems using the Koopman operator framework and data-driven methods. Nonlinear power systems, characterized by complex behaviors and sensitivity to initial conditions, pose significant challenges for stability and safety assessment, especially during transient events.

The first part of this work focuses on reachability analysis using the spectral properties of the Koopman operator. By leveraging eigenfunctions extracted from sampled trajectory data, the approach computes forward and backward reachable sets efficiently, even in high-dimensional nonlinear systems, without requiring dense state-space sampling. This method is validated through numerical examples, demonstrating its ability to …

Robust Online Inertia Estimation In Power Systems Using Ambient Data In The Presence Of Inverter-Based Resources, Narges Ghiasi

All Dissertations

The increasing penetration of Inverter-Based Resources (IBRs) in power systems has significantly altered system dynamics, reducing the system's effective rotational inertia and challenging frequency stability. Accurate online inertia estimation is essential for maintaining system reliability under these evolving conditions. This paper introduces a robust methodology for online inertia estimation using ambient data collected during normal system operation. The proposed method employs a state-space model to represent system dynamics and introduces synthetic step changes to simulate disturbances. By analyzing the frequency response and applying advanced signal processing techniques, the methodology estimates system inertia without requiring real large-scale disturbances. The approach is …

An Investigation Into The Impact Of Inverter Based Resources On Critical Clearing Time, Trupal Patel

All Dissertations

Renewable energy sources, mainly inverter-based resources (IBRs) such as solar and wind plants are being connected in large numbers to the bulk power grid in the United States and around the world. Additionally, generation using fossil fuels are being phased out, which results in the loss of rotor inertia, a key contributor to the transient stability of power systems. Therefore, the large-signal behavior of IBRs and its impact on transient stability must be studied.

This work studies this impact through the metric of critical clearing time (CCT). Impact of grid topology, generation mix and control modes of IBRs on CCT …

Research Progress On Thermal Management Of Lithium-Ion Batteries, Hong-Da Li, Qiu-Wan Shen, Zhao-Yang Zhang, Xin-Yue Zhao, Yuan Wei, Shi-An Li

Journal of Electrochemistry

Nowadays, new energy technologies are developing rapidly, energy storage systems are widely used, and lithium-ion batteries occupy a dominant position among them. Therefore, it is also very important to ensure their performance, safety and service life through thermal management technology. In this paper, the causes of thermal runaway of lithium batteries are reviewed firstly, and three commonly used thermal management technologies, namely, air cooling, liquid cooling and phase change material cooling, are compared according to relevant literature in recent years. Air cooling technology has been widely studied because of its simple structure and low cost, but its temperature control effect …

Regulating The Amount Of Graphene Oxide For Enhanced Capacitive Energy Storage Of Mof Derived Materials, Yong-Ji Qin, Jing-Quan Yang, Hao Wang, Mei-Ling Lian, Pei-Pei Jia, Jun Luo, Xi-Jun Liu, Jun-Feng Liu

Journal of Electrochemistry

In pursuit of more efficient and stable electrochemical energy storage materials, composite materials consisting of metal oxides and graphene oxide have garnered significant attention due to their unique structures and exceptional properties. Graphene oxide (GO), a two-dimensional material with an extremely high specific surface area and excellent conductivity, offers new possibilities for enhancing the electrochemical performance of metal oxides. In this work, we synthesized metal- organic framework (MOF) and GO composites by regulating the amount of GO, and successfully prepared composites of metal oxides supported by nitrogen-doped carbon frameworks and GO through a simple one-step calcination process. Based on the …

Participation Of Battery Energy Storage Systems In Load Frequency Control Of Power Systems, Zakaria Afsharbakeshloo

LSU Doctoral Dissertations

In this research, functionalities and roles of Battery Energy Storage Systems (BESSs) in power systems are extended beyond primary frequency control (PFC). The BESSs, while participating in PFC, are controlled through charge controllers to first maintain their state-of-charge (SOC) within an acceptable range through a primary charge controller, and to recharge the BESS to its maximum SOC through a secondary charge controller. This forms a hierarchical frequency and SOC control of power grids with BESSs. In this regard, multiple BESS case is considered as well, and by employing the SOC balancing principle, it is shown that desired power sharing among …

Traditional Energy And Renewable Energy And Their Implications On Sustainable Development (Examples From Lebanon And The World), Radwan Ejel

Al Jinan الجنان

This study aims to introduce the types of fossil and renewable energies by presenting the various associated concepts. It shows their characteristics, in addition to the concept of sustainable development, to show the extent of traditional energy's repercussions on sustainable development and the role of renewable energies in promoting its concept through its three economic, social, and environmental dimensions. It also presents some statistical models on renewable energy, especially solar energy in Lebanon, the Arab world, and the world.

Previously, man used to invest in traditional fossil energy, such as oil, gas, and coal, to meet his economic and technological …

Enhancing Power System Operation: Hydrogen, Dc Transmission Systems, And Robust Optimization, Anping Zhou

Electrical Engineering Theses and Dissertations

The increasing penetration of renewable energy sources (RESs) has brought considerable economic and environmental benefits to power system operations. However, it also introduces several critical challenges that should be addressed to ensure system reliability and efficiency. First, from the generation side, energy curtailment remains a persistent issue due to the random and intermittent nature of RESs. Second, from the transmission side, delivering power from remote RESs (e.g., offshore wind farms) requires substantial infrastructure investment and careful planning. Third, from the operation side, the inherent uncertainty and variability of RES generation create operational difficulties that necessitate advanced mathematical optimization tools for …

Mitigation Of Voltage Disturbances In Industrial Power Distribution Networks Using Dynamic Voltage Restorers, Aviti T. Mushi

Tanzania Journal of Engineering and Technology (TJET)

Most electrical and electronic equipment in industries require high-quality power to function efficiently. Nonetheless, voltage sags and swells are pressing concerns and prone to directly impact the economy of industrial customers. One such customer embattled with these problems is Mbeya Cement Company Limited (MCC) located in Mbeya, Tanzania. These issues mainly are caused by upstream faults and switching operations. One way to address these is by utilizing the voltage injection method, which employs a power device known as a dynamic voltage restorer (DVR). In this paper, the voltage sags and swells of balanced three-phase, unbalanced double-line and single-line to ground …

Thermal Energy Storage System Using Silica Sand As Heat Storage Medium: Simulation Of Geita Gold Mine, Santos Kihwele

Tanzania Journal of Engineering and Technology (TJET)

Currently, Geita Gold Mine (GGM) relies on electrical energy from the national grid and diesel power generators to generate electricity for various industrial applications. The plant currently spends a large amount of money on generating power from diesel generators. The total annual cost of power generation from diesel generators including lubricants is USD 56,057,990. The total annual fuel cost is USD 53,531,805 for a total of 54,985,473 liters per year. Most of the power generated by the generators is consumed in the industrial thermal processes. Thermal energy applications at the plant are thermal drying of the extracted ores to remove …

Evaluation Of Thermal And Emission Performances Of Briquettes Produced From Carbonized Corn Cob And Corn Husk, Karina S. Motani

Tanzania Journal of Engineering and Technology (TJET)

The Mozambican agro-industrial sector relies heavily on various crops, with maize being the most significant. During processing, substantial waste is generated, which is often discarded as organic matter or burned, contributing to environmental pollution and the loss of potential energy resources. This study evaluated the thermal and emission performance of briquettes made from carbonized corn cob (CCC) and carbonized corn husk (CCH), using cashew nut skin as a binder for clean cooking applications. The briquettes were assessed against firewood and charcoal as control fuels, focusing on several energy performance parameters: water boiling time (WBT), combustion index (CI), thermal efficiency (TE), …

The Impacts Of Renewable Energy Sources: A Review On Grid Inertia And Frequency Regulation, Sospeter Gabriel

Tanzania Journal of Engineering and Technology (TJET)

The power system is gradually transitioning into low inertia due to integrating substantial intermittency quantity of converter-based renewable energy sources, such as wind and photovoltaic power, into the current power grid network. This integration presents significant inertia and frequency control challenges to the network as a result of a decrease in the percentage of synchronous generators. Moreover, faster frequency deviations are posed by the mismatch between the supply and demand during contingencies, which creates difficulties in preserving the frequency stability of the power system. This research explores the impacts of renewable energy sources (RESs) on grid inertia and frequency management …

Analysis Of An Improved Reliability Dual-Buck Structured Three-Level Flying Capacitor Inverter, Almachius Kahwa Dr.

Tanzania Journal of Engineering and Technology (TJET)

With the increased demand for high-reliability power converters in the electric drive-train and propulsion systems, the efforts to design and analyze converters with high fault tolerance have become apparent. Among the emerging trends to improve the reliability of power converters is the incorporation of dual-buck (DB) structures in traditional converter topologies. Thus, this paper studies a single-phase dual-buck structured three-level flying capacitor (FC) inverter. The dual-buck flying capacitor (DBFC) inverter was constructed in such a way as to suppress the shoot-through problems that may occur because of the switching mismatch and gate driver delay, as exhibited in the traditional FC …

Calibration Of Measurement Tools In The Experimental Test Rig For Hydropower Performance Evaluation, Ombeni J. Mdee

Tanzania Journal of Engineering and Technology (TJET)

The demonstration of a typical hydropower plant requires the development of a test rig with the installation of tools to measure the performance parameters. The measurement tools require a calibration process to improve the quality of recorded data. This study involved the calibration of traditional and automated measurement tools connected to the hydropower test rig through an Arduino microprocessor. The automated measurement tools included a pressure transducer, flow meter, digital tachometer, and torque transducer, while traditional measurement tools, including a pressure gauge, concrete water tank, contact tachometer, and force lever arm balance, were connected in the same test rig during …

Review On Gas-To-Liquids Conversion Technology: Lessons From Case Studies And Potential Strategies For Implementation In Tanzania, Joseph H. Kihedu

Tanzania Journal of Engineering and Technology (TJET)

This review paper explores the transformative potential of Gas-to- Liquids (GTL) technology for harnessing Tanzania's vast natural gas resources. With significant discoveries of natural gas reserves totalling up to 57 Tcf in fields such as Songosongo, Mnazi Bay, Block 1, 2, 3 and 4. Tanzania is positioned to leverage GTL technology to convert these resources into high-value liquid fuels like gasoline, diesel and naphtha. Review of GTL process, its products and applications has been done. By analysing successful GTL projects globally and drawing lessons applicable to Tanzania, this paper provides strategic recommendations for policymakers and stakeholders to foster GTL development. …

A Review Of Lithium-Ion Battery Capacity Fade Deceleration At Power Fluctuations In Renewable Energy Systems, Isaac Gwayi

Tanzania Journal of Engineering and Technology (TJET)

Application of lithium-ion (Li-ion) batteries to store energy in renewable energy systems (RESs) is increasing due to their promising properties. Therefore, it is crucial to understand aging behaviours of Li-ion battery during RES life time as this directly affects cost of energy. Li-ion battery aging can be categorised into calendar aging and cycle aging. Calendar aging depends mainly on temperature and state of charge (SoC). In addition to temperature and SoC, cycle aging depends also on charge and discharge current rates and cut-off voltages. Higher current rates lead to faster Li-ion battery aging. It is necessary to identify appropriate battery …

Assessment Of Maintenance Performance Level Of Selected Hydropower Plants In Tanzania, Mahamudu H. Mtebwa

Tanzania Journal of Engineering and Technology (TJET)

Despite significant progress in increasing electricity access to over 78%, electricity reliability in Tanzania remains a concern, with frequent power outages reported. Maintenance issues in hydropower plants have been identified as a critical factor contributing to this problem. However, the specific maintenance performance levels have not been fully assessed. This study conducts a comprehensive evaluation of the maintenance performance of four key hydropower plants: Kidatu (204 MW), Kihansi (180 MW), Mtera (80 MW), and New Pangani Falls (68 MW). Data collected from staff surveys and maintenance records between 2018 and 2022 were used in the study. Although staff demonstrated a …

Potential Use Of Pump As Turbine Coupled To Self-Excited Induction Generator For Micro-Hydro Cooking And Cooling Applications, Emanuel J. Nyirenda

Tanzania Journal of Engineering and Technology (TJET)

Clean cooking and efficient cooling in developing countries have recently become areas of great focus. Further, the environmental impact of flooding in high-capacity hydroelectric plants has become a major concern. As a result, there is growing emphasis on developing sustainable and decentralized energy solutions, focusing on the potential of micro-hydro systems, especially in rural and remote areas. Although there are several alternative energy generation methods, their application is not straightforward. One of the latest technologies under research is using pumps as turbines coupled to an induction generator. This paper explores through a rigorous experimental approach the possibility of using a …

Optimal Placement Of Distributed Generation Units In Power Distribution Networks Using Particle Swarm Optimization, Owdean M. Suwi

Tanzania Journal of Engineering and Technology (TJET)

Power losses and voltage drops in distribution networks are critical issues in power system operation, reducing efficiency, reliability, and overall quality of the power supply to customers. Additionally, the rising electricity demand, deregulation of energy markets, and congestion in transmission networks have further contributed to the declining performance of the grid. To address these challenges, integrating distributed generation units (DGUs) into electric distribution systems has gained significant attention. Furthermore, the integration of DGUs into conventional fossil fuel-based power plants is becoming necessary to reduce greenhouse gas emissions. However, proper placement and sizing of DGUs are crucial for achieving optimal benefits. …

Prospects Of Clean Cooking Energy In Africa - Transition Pathways And Implications, Joseph H. Kihedu Dr.

Tanzania Journal of Engineering and Technology (TJET)

Despite abundant renewable energy resources, African countries still suffer from energy poverty, particularly in cooking. Up to 2022, about 74% of the African population had no access to clean cooking energy. With focus to Sub-Saharan African population, 90% has no access to clean cooking energy which decrease by 7% when kerosene is included. Traditional cooking, which involves the use of charcoal and firewood, is associated with health problems, environmental degradation, socioeconomic issues, and gender inequality. Transitioning to clean cooking energy not only promises significant health benefits but also offers opportunities for sustainable economic development and environmental preservation. In this study, …

Redox-Active Monolayers On Ito Prepared By Post-Amidation And Direct Esterification And Their Spectroelectrochemical Characterization, Takamasa Sagara, Sae Nakai, Ryusuke Yofu, Shota Kojin

Journal of Electrochemistry

A redox-active monolayer on an optically transparent electrode constitutes a typical platform for spectroelectrochemical sensing. The necessity for its sophistication arises from the availability of multi-dimensional sensing signals. Simultaneous monitoring of the redox current and color change synchronized with the oxidation state change significantly enhances sensitivity and selectivity. This study aimed to elucidate the modification of an indium tin oxide (ITO) electrode with a viologen monolayer with an ordered orientation. Novel methods were developed to immobilize a viologen molecule bearing a carboxyl group to form assembled monolayers through a condensation reaction using 1-ethyl-3-(3-dimethylaminopropyl)-carbodiimide with N-hydroxy-succinimide (EDC/NHS). In the two methods …

Ambient Co2 Capture And Valorization Enabled By Tandem Electrolysis Using Solid-State Electrolyte Reactor, Yan-Bo Hua, Bao-Xin Ni, Kun Jiang

Journal of Electrochemistry

Electrocatalytic carbon dioxide reduction is a promising technology for addressing global energy and environmental crises. However, its practical application faces two critical challenges: the complex and energy-intensive process of separating mixed reduction products and the economic viability of the carbon sources (reactants) used. To tackle these challenges simultaneously, solid-state electrolyte (SSE) reactors are emerging as a promising solution. In this review, we focus on the feasibility of applying SSE for tandem electrochemical CO₂ capture and conversion. The configurations and fundamental principles of SSE reactors are first discussed, followed by an introduction to its applications in these two specific areas, …

Review Of Energy Storage Systems For Optimal Planning And Operation Of Microgrid Resources, Ibrahim M. Ibrahim Dr., Walid A. Omran Prof., Almoataz Y. Abdelaziz Prof.

Future Engineering Journal

Energy storage systems (ESSs) play a central role in microgrid (MG) research and are widely used in related studies. This is due to the many applications of ESSs that enhance the performance of MGs. These include power quality applications and energy management applications. This paper presents a literature review of various studies that address the use of ESSs in microgrid (MG) systems to perform functions aimed at enhancing overall performance. These studies are classified into two main categories: planning and operational planning, with the MG being either grid-connected or islanded in each case. Finally, the optimization techniques used to obtain …

Design And Development Of A Half-Bridge Llc Resonant Converter Laboratory Module, Alyssa Lam

Master's Theses

Resonant DC-DC converters have become a well-known solution in power supplies due to their ability to improve efficiency by utilizing soft-switching techniques. This further has caused a growing interest in industry to use these converters for high-switching-frequency, high-efficiency, and high-power applications such as EV charging stations, photovoltaic systems, battery chargers, etc. One particular resonant topology that has gained popularity in recent years is the LLC resonant converter. Due to the prevalent use of the LLC resonant converter, it is therefore crucial for students preparing for a career path in power electronics to become well-versed in the concept and implementation of …

Open Source Microgrid Integration, Zachary J. Kwast

Master's Theses

Microgrids are small-scale electrical systems that operate in tandem with a centralized grid to provide power to a smaller group of target devices. These microgrids are used for a wide range of different purposes, which invites the need for a generalized model that can be tweaked for a variety of uses. This document goes over the theory used to design an open source AC and DC microgrid meant for use by anyone. The microgrid is created using a Raspberry Pi that controls two different power converters so that a wide range of voltage and current characteristics can be achieved. These …

Expeditionary Ocean Power Generator, Ethan Gossard, Julian Steele, Alex Gray, Hunter Herring-Alderete

Electrical Engineering

Point Absorber Wave Energy Converters are currently being explored as a new form of energy harvesting. The Naval Facilities' Expeditionary Ocean Warfare Center (NAVFAC EXWC) has commissioned an interdisciplinary project for students at California Polytechnic State University, San Luis Obispo, to design a prototype Expeditionary Ocean Power Generator (ExOPG) for charging batteries in the ocean.

The Mechanical Engineering team is responsible for assembling the prototype chassis, which converts the vertical bobbing motion of a buoy into kinetic rotational energy that can be used to rotate a generator shaft. They are additionally tasked with isolating the electrical components from the harsh …

Piezoelectric Actuator Driver System, Daniel Hoefer

Electrical Engineering

This work presents the design, fabrication, and testing of a high-voltage piezoelectric actuator driver system purposed for integration into defense and aerospace precision motion control applications, particularly those in laser optics. The core challenge addressed was the mismatch between the standardized 28V DC power bus used in military systems and the significantly higher voltage requirements of piezoelectric actuators. Existing commercial drivers were evaluated and found unsuitable for field deployment due to inadequate ruggedness, excessive complexity, or power limitations. Consequently, a modular system architecture was designed featuring four independent driver channels, each using a high-voltage, high-current linear amplifier topology to scale …

Marine Energy Collegiate Competition - Polywave Energy, Beneda Loya, Isaiah Martinez, Emily Nicoletta, Michael Weber

Electrical Engineering

This document is the final Electrical Engineering senior project report for Cal Poly’s 2025 Marine Energy Collegiate Competition (MECC) team. The goal of this project is to build and test a wave-energy converter designed to address the need for sustainable power generation for remote coastal community microgrids. These existing systems often rely on costly, fossil-fuel generators, creating both logistical and environmental challenges. Our device aims to provide a renewable, low-maintenance solution that can operate reliably in offshore environments and serve commercial or research applications. The goal of the electrical engineering team was to develop a system that can convert rotational …

Advanced Light Dimming Power Converter, Jaden Nguyen, Edwin Lin, Alan Thai

Electrical Engineering

This senior project discusses and follows the development of the Advanced Light Dimming Power Converter meant to modernize the power electronics curriculum and improve student safety for a lab. The power converter attempts to replace the original experiment which includes a traditional TRIAC-based dimmer and focuses on demonstrating phase angle control for incandescent light bulbs. However, several drawbacks including high-voltage exposure and outdated technology warranted a revamp. The redesigned module includes a dual-experiment setup with an updated TRIAC-based dimmer circuit and a new AC-DC LED driver circuit with constant current control and PWM dimming capability. Both systems have been fabricated …