Power and Energy Commons^™

Aging Characteristics Of Lithium-Ion Battery Under Fast Charging Based On Electrochemical-Thermal-Mechanical Coupling Model, Dong-Xu Zuo, Pei-Chao Li

Journal of Electrochemistry

The aging characteristics of lithium-ion battery (LIB) under fast charging is investigated based on an electrochemical-thermal-mechanical (ETM) coupling model. Firstly, the ETM coupling model is established by COMSOL Multiphysics. Subsequently, a long cycle test was conducted to explore the aging characteristics of LIB. Specifically, the effects of charging (C) rate and cycle number on battery aging are analyzed in terms of nonuniform distribution of solid electrolyte interface (SEI), SEI formation, thermal stability and stress characteristics. The results indicate that the increases in C rate and cycling led to an increase in the degree of nonuniform distribution of SEI, and thus …

Optimization Of Channel Structure Of Alkaline Water Electrolyzer By Using An Expanded Mesh As A Bipolar Plate, Hai-Yan Xiong, Zhen-Xiao Zhu, Xin Gao, Chen-Ming Fan, Hui-Bao Luan, Bing Li

Journal of Electrochemistry

Alkaline water electrolysis (AWE) is the most mature technology for hydrogen production by water electrolysis. Alkaline water electrolyzer consists of multiple electrolysis cells, and a single cell consists of a diaphragm, electrodes, bipolar plates and end plates, etc. The existing industrial bipolar plate channel is concave-convex structure, which is manufactured by complicated and high-cost mold punching. This structure still results in uneven electrolyte flow and low current density in the electrolytic cell, further increasing in energy consumption and cost of AWE. Thereby, in this article, the electrochemical and flow model is firstly constructed, based on the existing industrial concave and …

Zhong-Qun Tian, Academician And Honorary Member Of Electrochemistry Committee Chinese Chemical Society, Achieved "Raman Lifetime Award", Editorial Office Of J.Electrochem.

Journal of Electrochemistry

No abstract provided.

Chinese Chemical Society: First Young Scholars' Symposium On Electrosynthesis Held Successfully, Chinese Society Of Electrochemistry (Cse)

Journal of Electrochemistry

No abstract provided.

2024 Tianmulake Advanced Anode Materials Innovation Forum And Sixth National Conference Of Advanced Battery Failure Analysis And Testing Technology Concluded Successfully, Editorial Office Of J.Electrochem.

Journal of Electrochemistry

No abstract provided.

Electronic Communication Between Co And Ru Sites Decorated On Nitrogen-Doped Carbon Nanotubes Boost The Alkaline Hydrogen Evolution Reaction, Meng-Ting Gao, Ying Wei, Xue-Meng Hu, Wenj-Jie Zhu, Qing-Qing Liu, Jin-Yuan Qiang, Wan-Wan Liu, Ying Wang, Xu Li, Jian-Feng Huang, Yong-Qiang Feng

Journal of Electrochemistry

Designing highly efficient Pt-free electrocatalysts with low overpotential for an alkaline hydrogen evolution reaction (HER) remains a significant challenge. Here, a novel and efficient cobalt (Co), ruthenium (Ru) bimetallic electrocatalyst composed of CoRu nanoalloy decorated on the N-doped carbon nanotubes (CoRu@N-CNTs), was prepared by reacting fullerenol with melamine via hydrothermal treatment and followed by pyrolysis. Benefiting from the electronic communication between Co and Ru sites, the as-obtained CoRu@N-CNTs catalyst exhibited superior electrocatalytic HER activity. To deliver a current density of 10 mA·cm^–2, it required an overpotential of merely 19 mV along with a Tafel slope of 26.19 mV·dec …

Design Frameworks For Ventilative Cooling: Perceptions From Building Design Practitioners In Ireland And The United Kingdom, Maha Sohail, Adam O'Donovan, Paul D. O'Sullivan

Publications

The global increase in building cooling demands poses a challenge for designers striving for net zero energy consumption. The prevalent use of mechanical cooling underscores the necessity for designers to consider Ventilative Cooling as a viable alternative in the early stages of building design. This paper presents findings from an exploratory survey and semi-structured interviews of industry experts in Ireland and the United Kingdom about their design processes and experienced-based approaches to designing Ventilative Cooling. The findings suggest that the pre-design stage has the same influence for promoting ventilative cooling strategies as the schematic and detailed design stages for practitioners, …

Gamifying Energy Management: Leveraging Lokalytica Smartmeter For Sustainable Future, Emilio Roman Perez, King Harold A. Recto

Electronics, Computer, and Communications Engineering Faculty Publications

The gamification of software applications has emerged as an effective strategy to enhance user engagement and promote desired behaviors. This paper explores the gamification of the Lokalytica SmartMeter application, an energy management platform that leverages data from meter readings through its users. By incorporating a challenge-based system and a points-based leaderboard, Lokalytica rewards users who reduce their energy consumption. The gamification application of Lokalytica was built using NextJS, a full-stack framework, along with Tailwind CSS and DaisyUI for UI design, MongoDB Atlas for the database, and GitHub for version control, collaboration, and tracking. This paper discusses the development process, the …

An Analysis Of Electrical Energy Resilience Technologies As Applied To Air Force Operations, Eric D. Danko

Theses and Dissertations

An analysis of 46 Resilient Energy Devices and Technology Concepts was conducted to determine their suitability for use in supporting Air Force Operations both at home station and abroad. The research consisted of two endeavors: an extensive literature review and a rank-ordering matrix. The dual nature of the efforts was designed to maximize usability and understanding for the End User, who may not be familiar with some principles of energy technologies, resilience, or design. The results showed the superiority of novel Solid (Metal) Fuels and Lead-Acid Batteries for Energy Storage and Thermoelectric Generators, Solar Photovoltaic Panels, Geothermal Extraction, Diesel Generators, …

Winning Results Of The 2Nd Xiamen University Short Video Abstract Contest For Science And Technology Papers, Editorial Office Of J.Electrochem.

Journal of Electrochemistry

No abstract provided.

2024 World Fuel Cell Conference Held In Ningbo, Zhejiang, Editorial Office Of J.Electrochem.

Journal of Electrochemistry

No abstract provided.

Recent Advances On Ruthenium-Based Electrocatalysts For Lithium-Oxygen Batteries, Yu-Zhe Wang, Zhuo-Liang Jiang, Bo Wen, Yao-Hui Huang, Fu-Jun Li

Journal of Electrochemistry

Rechargeable lithium-oxygen (Li-O₂) batteries have attracted wide attention due to their high energy density. However, the sluggish cathode kinetics results in high overvoltage and poor cycling performance. Ruthenium (Ru)-based electrocatalysts have been demonstrated to be promising cathode catalysts to promote oxygen evolution reaction (OER). It facilitates decomposition of lithium peroxide (Li₂O₂) by adjusting Li₂O₂ morphologies, which is due to the strong interaction between Ru-based catalyst and superoxide anion (O₂^–) intermediate. In this review, the design strategies of Ru-based electrocatalysts are introduced to enhance their OER catalytic kinetics in …

Rate Law For Photoelectrochemical Water Splitting Over Cuo, Bo-Yuan Gao, Wen-Hua Leng

Journal of Electrochemistry

Photocatalytic splitting of water over p-type semiconductors is a promising strategy for production of hydrogen. However, the determination of rate law is rarely reported. To this purpose, copper oxide (CuO) is selected as a model photocathode in this study, and the photogenerated surface charge density, interfacial charge transfer rate constant and their relation to the water reduction rate (in terms of photocurrent) were investigated by a combination of (photo)electrochemical techniques. The results showed that the charge transfer rate constant is exponential-dependent on the surface charge density, and that the photocurrent equals to the product of the charge transfer rate constant …

Numerical Analysis Of Explosion Characteristics Of Vent Gas From 18650 Lifepo4 Batteries With Different States Of Charge, Shi-Lin Wang, Xu Gong, Li-Na Liu, Yi-Tong Li, Chen-Yu Zhang, Le-Jun Xu, Xu-Ning Feng, Huai-Bin Wang

Journal of Electrochemistry

The combustion and explosion characteristics of lithium-ion battery vent gas is a key factor in determining the fire hazard of lithium-ion batteries. Investigating the combustion and explosion hazards of lithium-ion batteries vent gas can provide guidance for rescue and protection in explosion accidents in energy storage stations and new energy vehicles, thereby promoting the application and development of lithium-ion batteries. Based on this understanding and combined with previous research on gas production from lithium-ion batteries, this article conducted a study on the combustion and explosion risks of vent gas from thermal runaway of 18650 LFP batteries with different states of …

Winning Works From Journal Of Electrochemistry: The 2Nd Xiamen University Short Video Abstract Contest For Science And Technology Journal Papers, Editorial Office Of J.Electrochem.

Journal of Electrochemistry

No abstract provided.

2024 "Electrochemical Research Paradigms" Summer School Successfully Held, Editorial Office Of J.Electrochem.

Journal of Electrochemistry

No abstract provided.

Upcoming Meeting-The 1St Young Investigator Symposium On Electrosynthesis, Chinese Chemical Society, Chinese Society Of Electrochemistry (Cse)

Journal of Electrochemistry

No abstract provided.

Unveiling The Indoor Performance Of Perovskite/Silicon Tan‑Dem Solar Cells: A Comprehensive Exploration Through Numerically Modelled Energy Band Diagrams, Ziad Khalifa, Sameh O. Abdellatif, Alexander De-Bernardinis, Muath Alkadi, Mostafa Ganoud, Saif Qaid

Chemical Engineering

This paper delves into the indoor performance analysis of Perovskite/Silicon Tandem Solar Cells (PSSTC) through a detailed exploration utilizing numerically modeled energy band diagrams. The primary objective is to uncover the potential of PSSTC for solar energy conversion in indoor settings. Various tandem cell configurations are scrutinized under diverse artificial lighting spectra, with an innovative Li4Ti5O12/ CsPbCl3/MAPbBr3/CH3NH3PbI3/ Si architecture achieving an exceptional maximum power conversion efficiency of 25.25%. This represents a substantial efficiency enhancement of nearly 7% compared to standalone Silicon cells. The study underscores the significance of design optimization in maximizing performance. The energy band diagram analysis reveals a …

Necessity Of Education For Efficient And Sustainable Production And Consumption Of Energy In Tanzania, George Kahangwa

Tanzania Journal of Engineering and Technology (TJET)

This paper reports the findings of a study that was conducted in Tanzania to grasp how the policies, plans and curricula at different levels of education accommodate knowledge gathered on energy to support the fostering of energy education. The study interrogated what necessitates the inclusion of energy education into the curricula in Tanzania. Subscribing to a qualitative approach, the study employed a desk research method to review curricula and other documents guiding secondary and university level education in the country. The study found out that heightening people’s consumption of energy for domestic and industrial purposes constituted the main issue that …

Feasibility Study Of Using Energy Extracted From The Process Of Electrochemically Consumed Of Al 2024 For Powering Daily Used Electric Car, Yanuar Mohamad Marda, Rini Riastuti, Muhammad Hamka Ibrahim

Journal of Materials Exploration and Findings

Usage of green energy for transportation has become important due to the contribution of transportation activity to climate change. Electrochemical energy has been used as a source of green energy. The objective of this work is to evaluate sufficiency of energy provided by electrochemically consumed Al 2024 for supplying energy to daily used PHEV electric car. Study of previous articles, observation of typical amount of energy required, electrochemical galvanic cell experiments, and simple calculations have been conducted to determine produced energy feasibility. Electrical energy produced by consuming 340 gr of Al 2024 in galvanic cells has the total lifetime of …

Fault Detection And Location In Renewable-Fed Distribution Systems Using Low Voltage Sensors, Bushra Farhat

All Theses

The penetration of Distributed Energy Resources (DERs) into the Electric Power System (EPS) is increasing. These (DERs) are mostly inverter-based resources (IBRs) that are integrated into (EPS) at the distribution level. Therefore, it has become necessary to leverage the integration of (IBRs) for both commercial and residential distribution systems through the deployment of Microgrid (MG). However, existing distribution systems that use fuses for sensing and isolating faults are not equipped to handle protection of microgrids where fault currents are fed from multiple sources and can flow downstream or upstream. Bulk of the protection schemes proposed in literature are heavily dependent …

Power Controller For Insulated Solar Electric Cooker, Ryan Koshy, Justin Tae-Hoon Kim

Electrical Engineering

Insulated Solar Electric Cookers, or ISECookers, are devices created to aid those in impoverished regions improve safety, sustainability, and quality of life regarding their cooking practices. ISECookers present an alternative to traditional biofuel/biomass energy sources and provide a closed-loop, self-sustaining system that can be used in a variety of environments. These devices present solutions to widespread issues such as pollution, deforestation, and hazardous emissions as a result of traditional cooking in developing regions around the world. A notable obstacle of these devices is power delivery. Given the varying conditions experienced by a solar panel (inclement weather, irradiance irregularities, etc.), it …

High-Power Power Conditioning Systems For Medium-Voltage Applications, Ahmed Rahouma Fares Rahouma

Graduate Theses and Dissertations

The purpose of this dissertation is to address the background, theoretical analyses, design methodologies, and evaluation techniques relevant to high-power power conditioning systems (PCSs) tailored for medium-voltage (MV) applications. Conventional PCSs, reliant on line-frequency transformers (LFTs), suffer from many problems including low power densities, inflexible designs, and scalability constraints. Employing multilevel converters (MLCs), particularly cascaded H-bridge topology, eliminates the need for these LFTs. A key focus lies in minimizing the number of cascaded building blocks by harnessing MV power switching modules. The dissertation makes two primary contributions: firstly, it offers a design methodology for MV-PCS, facilitating the selection of the …

Data-Driven Enhanced Energy Management System Applications For Energy Control Centers, Dulip Madurasinghe

All Dissertations

This dissertation explores the pressing needs of modern bulk power system operation and control and delves into enhancements to EMS applications with minimal infrastructure development. The dissertation investigates three main EMS application enhancements. The transmission network topology processing (TNTP) is a foundational application of the EMS. A physics-based hierarchical transmission network topology processing (H-TNTP), including substation configuration identification, to improve efficiency and reliability is proposed. Secondly, a multi-level distributed linear state estimation (D-LSE) approach solely based on PMUs is proposed utilizing H-TNTP as the network modeling tool. The D-LSE can conduct linear state estimation (LSE) at either substation, area or …

Time-Domain Line Protection In Presence Of Renewables, Prabin Adhikari

All Dissertations

Inverter based resources (IBRs) are crucial in integrating renewable energy sources into the power grid. However, their unique fault characteristics, significantly different from synchronous generators (SGs), present several challenges for existing line protection schemes at both transmission and distribution levels. These schemes, reliant on distance and directional relays designed in phasor domain, are not well-suited for IBRs. Most published literature addressing this problem concentrates on altering the control design of inverters. However, this approach faces practical limitations. Inverter controls, often proprietary, are not readily accessible to utilities, rendering the control-based solutions impractical for widespread implementation.

To address this challenge, this …

Evaluation, Modeling And Application Of Gallium Nitride Field Effect Transistor, Geno Guillaume

Graduate Theses and Dissertations

Gallium Nitride (GaN) has emerged as one of the leading materials for power devices due to its wide band gap and high electron mobility. The band gap is the minimum energy required to excite an electron up to a state in the conduction band where it can participate in conduction. Because of this, wide band gap (WBG) materials are favorable for various electrical applications. The market for GaN high-electron-mobility transistor (HEMT) is projected to exceed $1.25 billion by 2027. With the increase of market interest, modern technologies emerge that aim to push the boundaries of efficiency for GaN power devices. …

A Position Allocation Approach To The Battery Electric Bus Charging Problem, Alexander Brown

All Graduate Theses and Dissertations, Fall 2023 to Present

With an increasing adoption of Battery Electric Bus (BEB) fleets, developing a reliable charging schedule is vital to a successful migration from their fossil fuel counterparts. In this work, a BEB charging scheduling framework that considers fixed route schedules, multiple charger types, and battery dynamics is modeled as a Mixed Integer Linear Program (MILP). The MILP is modeled after the Berth Allocation Problem (BAP) in a modified form known as the Position Allocation Problem (PAP). The optimization coordinates BEB charging to ensure that each vehicle remains above a specified charge percentage. The model also minimizes the total number of chargers …

Thermal Management Of Roadway-Embedded Power Electronics For Electric Vehicle Dynamic Wireless Charging Systems, Conner R. Sabin

All Graduate Theses and Dissertations, Fall 2023 to Present

Electric vehicles (EVs) are gaining popularity worldwide. However, concerns raised by the public about purchasing EVs include the limited availability of charging infrastructure, high costs, and the inconvenience of current charging methods. Dynamic wireless charging systems enable electric vehicles to charge while driving, thereby extending the range of EVs and reducing the necessity for large, expensive batteries. Moreover, these systems can initiate charging automatically without user interaction, enhancing charging convenience.

The ground assembly of existing dynamic wireless charging systems consists of an electromagnetic assembly, power electronics for the transmitter pad, and power electronics for grid connection. Installation of these systems …

Series Reports From Professor Wei’S Group Of Chongqing University: Advancements In Electrochemical Energy Conversions (1/4): Report 1: High-Performance Oxygen Reduction Catalysts For Fuel Cells, Fa-Dong Chen, Zhuo-Yang Xie, Meng-Ting Li, Si-Guo Chen, Wei Ding, Li Li, Jing Li, Zi-Dong Wei

Journal of Electrochemistry

Two major challenges, high cost and short lifespan, have been hindering the commercialization process of low-temperature fuel cells. Professor Wei’s group has been focusing on decreasing cathode Pt loadings without losses of activity and durability, and their research advances in this area over the past three decades are briefly reviewed herein. Regarding the Pt-based catalysts and the low Pt usage, they have firstly tried to clarify the degradation mechanism of Pt/C catalysts, and then demonstrated that the activity and stability could be improved by three strategies: regulating the nanostructures of the active sites, enhancing the effects of support materials, and …

Data-Driven Viewpoint For Developing Next-Generation Mg-Ion Solid-State Electrolytes, Fang-Ling Yang, Ryuhei Sato, Eric Jian-Feng Cheng, Kazuaki Kisu, Qian Wang, Xue Jia, Shin-Ichi Orimo, Hao Li

Journal of Electrochemistry

Magnesium (Mg) is a promising alternative to lithium (Li) in solid-state batteries due to its abundance and high theoretical volumetric capacity. However, the sluggish Mg-ion conduction in the lattice of solid-state electrolytes (SSEs) is one of the key challenges that hamper the development of Mg-ion solid-state batteries. Though various Mg-ion SSEs have been reported in recent years, key insights are hard to be derived from a single literature report. Besides, the structure-performance relationships of Mg-ion SSEs need to be further unraveled to provide a more precise design guideline for SSEs. In this Viewpoints article, we analyze the structural characteristics of …