Power and Energy Commons^™

Simultaneous Frequency Regulation And Active Power Sharing In Islanded Microgrid Using Deep Reinforcement Learning, Oroghene Oboreh-Snapps, Sophia A. Strathman, Jonathan Saelens, Arnold Fernandes, Lauryn Morris, Praneeth Uddarraju, Jonathan W. Kimball

Electrical and Computer Engineering Faculty Research & Creative Works

This paper presents a novel approach that integrates deep reinforcement learning (DRL) with the conventional virtual synchronous generator (VSG) to address dual objectives of microgrid (MG) control, frequency regulation and precise active power sharing. MGs typically consist of multiple Inverter-Based-Distributed-Generators (IBDGs) connected in parallel through different line impedances. The conventional active power loop (APL) of the VSG encounters significant steady-state frequency errors as load increases/decreases during islanded operation. To mitigate this issue, secondary-level controllers like proportional-integral (PI) control are added to the APL to regulate the frequency of IBDGs. However, PI control compromises power-sharing capabilities when the impedance values of …

Comparative Analysis Of Ac Coupled And Dc Coupled Microgrids: Analyzing Electrical Performances And Economics, Sanjeev Kumar

Cal Poly Humboldt theses and projects

This study compares the electrical performance and economics of DC-coupled and AC-coupled community microgrid configurations through simulation and financial modeling of the Redwood Coast Airport Microgrid (RCAM), which integrates 2.2 MW of solar PV and 2.2 MW of battery storage. Unified load flow, short circuit, transient stability (including load impact), and efficiency studies using ETAP & SAM software tools demonstrate that the DC-coupled configuration is preferred based on efficiency, while both configurations exhibit equivalent performance with respect to selected power quality metrics. The DC setup exhibits 11% higher overall efficiency than AC coupling in converting solar energy to grid exports. …

Modeling And Mitigating Power Grid Vulnerabilities: A Comprehensive Analysis Of Renewable Energy Integration, Cascading Failures, And Microgrid Resilience, Saikat Das

Theses and Dissertations

In modern power systems, rapid integration of renewable energy and the emergence of microgrid technology emphasize the necessity for a comprehensive understanding of vulnerabilities and robust defense mechanisms. The research begins with an exploration of power grid vulnerabilities to cascading failure amidst the increasing integration of renewable energy sources. A novel power balance technique is employed for cascading failure analysis and power grid vulnerability measurement. Simulation results indicate that the growing penetration of renewable energy has a proportionally higher impact on grid vulnerability to cascading failures. After a certain level of renewable energy penetration, some systems may deteriorate rapidly, necessitating …

การศึกษาแนวทางการลดปริมาณก๊าซคาร์บอนไดออกไซด์ในภาคขนส่งทางอากาศของประเทศไทย, วริศรา สุริยะสิงห์

Chulalongkorn University Theses and Dissertations (Chula ETD)

งานวิจัยนี้มีวัตถุประสงค์เพื่อประเมินปริมาณการปล่อยก๊าซเรือนกระจกและวิเคราะห์ศักยภาพในการลดการปล่อยก๊าซเรือนกระจกของภาคการบินของประเทศไทย ทั้งในเที่ยวบินภายในประเทศและระหว่างประเทศ โดยเน้นสองแนวทางหลักได้แก่ การเพิ่มประสิทธิภาพพลังงานของอากาศยาน และการใช้เชื้อเพลิงอากาศยานแบบยั่งยืน (SAF) โดยใช้หลักเกณฑ์ประเมินของ IPCC ร่วมกับแบบจำลองการประมาณการใช้เชื้อเพลิง โดยเป็นการคำนวณในระดับ Tier 3 ซึ่งครอบคลุมทั้งช่วงการขึ้นลง (LTO) และช่วงขณะทำการบิน (Cruise) การศึกษานี้ได้วิเคราะห์ภาพอนาคตในช่วงปี พ.ศ. 2568–2593 ผ่าน 3 ภาพอนาคตได้แก่ (1) ภาพการเติบโตตามปกติ (Business as Usual, BAU) (2)ภาพ Efficiency and SAF Adoption Scenario (ESS) และ (3)ภาพ Accelerated Decarbonization Scenario (ADS) โดยแต่ละภาพอนาคตมีสมมติฐานที่แตกต่างกันในด้านการเพิ่มประสิทธิภาพของอากาศยานและสัดส่วนการใช้ SAF โดยในภาพ ESS และภาพ ADS สมมติให้มีการเพิ่มประสิทธิภาพอากาศยานสูงสุด 15% และใช้ SAF ในสัดส่วน 50% และ 70% ภายในปี พ.ศ. 2593 ตามลำดับ ในขณะที่ BAU มีการปรับปรุงในระดับต่ำ ผลการศึกษาระบุว่า ภาพอนาคต BAUที่ไม่มีมาตรการเพิ่มเติม การปล่อยก๊าซเรือนกระจกในปี พ.ศ. 2593 จะอยู่ที่ประมาณ 32 ล้านตันคาร์บอนไดออกไซด์เทียบเท่า (million tonnes of CO2 equivalent, MtCO2e) ขณะที่ภาพ ESS และภาพ ADS จะสามารถลดการปล่อยได้เหลือประมาณ 14 MtCO2e และ 9 MtCO2e ตามลำดับ โดยมีการใช้ SAF ประมาณ 5,612 ล้านลิตรในภาพ ESS และ 7,854 ล้านลิตรในภาพ ADS จากผลการศึกษานี้แสดงให้เห็นว่า SAF …

A Comprehensive Review Of Piezoelectric Ultrasonic Motors: Classifications, Characterization, Fabrication, Applications, And Future Challenges, Sidra Naz, Tian-Bing Xu

Mechanical & Aerospace Engineering Faculty Publications

Piezoelectric ultrasonic motors (USMs) are actuators that use ultrasonic frequency piezoelectric vibration-generated waves to transform electrical energy into rotary or translating motion. USMs receive more attention because they offer distinct qualities over traditional magnet-coil-based motors, such as miniaturization, great accuracy, speed, non-magnetic nature, silent operation, straightforward construction, broad temperature operations, and adaptability. This review study focuses on the principle of USMs and their classifications, characterization, fabrication methods, applications, and future challenges. Firstly, the classifications of USMs, especially, standing-wave, traveling-wave, hybrid-mode, and multi-degree-of-freedom USMs, are summarized, and their respective functioning principles are explained. Secondly, finite element modeling analysis for design and …

Dynamic Modeling And Control Of A Solid State Semiconductor-Based Transformer, Microgrid And Storage Systems, Rubén Darío Viñán-Velasco

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

Smart Grids are power grid models designed with the idea of including the growing new technologies, from generation to storage devices, and are a response to the growing demands from consumers and the presence of electronic components being commonplace in the modern devices. The design requires a dynamic alternative in order to build an independent grid that can also work in cooperation with other micro-grids and the power grid in an integrated way. Smart-grids present several advantages over the traditional power grid scheme, but the economic costs of the components required to implement smart-grids is currently a great limitation. This …

Designing High-Performance Identity-Based Quantum Signature Protocol With Strong Security, Sunil Prajapat, Pankaj Kumar, Sandeep Kumar, Ashok Kumar Das, Sachin Shetty, M. Shamim Hossain

VMASC Publications

Due to the rapid advancement of quantum computers, there has been a furious race for quantum technologies in academia and industry. Quantum cryptography is an important tool for achieving security services during quantum communication. Designated verifier signature, a variant of quantum cryptography, is very useful in applications like the Internet of Things (IoT) and auctions. An identity-based quantum-designated verifier signature (QDVS) scheme is suggested in this work. Our protocol features security attributes like eavesdropping, non-repudiation, designated verification, and hiding sources attacks. Additionally, it is protected from attacks on forgery, inter-resending, and impersonation. The proposed scheme benefits from the traditional designated …

Evaluating The Performance Of 5g Nr In Indoor Environments: An Experimental Study, Bikash Chandra Singh, Rafael Diaz, Sachin Shetty

School of Cybersecurity Faculty Publications

The 5G wireless standard has emerged as a trans-formative technology with the potential to revolutionize various industries by providing enhanced connectivity and communication capabilities. This advanced standard offers a diverse range of applications, including Ultra-Reliable Low-Latency Communication (URLLC), Enhanced Mobile Broadband (eMBB), and Massive Machine Type Communication (mMTC). In this Scientific research paper, we present a comprehensive analysis of the performance and capabilities of a deployed indoor 5G network in a controlled laboratory environment. The experimental setup comprises an Amarisoft Callbox, serving as the 5G core, along with a Remote Radio Head (RRH) and user equipment (UEs). Our primary objective …

Design And Control Of Axial Flux Permanent Magnet Coreless Machines With Special Windings, Yaser Chulaee

Theses and Dissertations--Electrical and Computer Engineering

Permanent magnet synchronous machines (PMSMs), particularly those of the axial flux type, are being researched and developed for various applications such as HVAC systems, aviation propulsion, and electric vehicles. The coreless (air-cored) stator axial flux permanent magnet (AFPM) machine topology offers notable advantages over conventional designs by eliminating magnetic cores and their associated losses. These advantages include potentially higher efficiency, zero cogging torque, and reduced audible noise and vibration. Eliminating the magnetic core also allows for more effective cooling systems, as coolants can be in direct contact with the stator windings, potentially improving power density and specific torque.

The absence …

Economical And Environmental Evaluation Of Non-Residential Demand Response In The European Transition To Zero-Carbon Energy, Markus Fleshutz

Theses

To meet climate objectives, major energy consumers with local multi-energy systems (L- MESs) must transition to renewable energy sources soon. The variability of renewable energies requires increased operational flexibility for integration. In this context, demand response (DR), a strategy in which electricity consumers adjust their load profiles in response to incentives, has become crucial, offering cost-effective flexibility. It supports L-MESs in integrating renewable energy, reducing decarbonization costs, and enhancing resilience. However, quantifying the economic DR potentials for L-MESs under carbon emission constraints is complex, especially when considering investment options in distributed energy resources. This complexity hinders the rapid adoption of …

Energy Harvesting For Residential Microgrid Distributed Sensor Systems, Devin C. Whalen

Master’s Theses

Microgrids are localized, independent power grids that can operate while connected to the larger electrical grid. These systems make intelligent decisions regarding power management and use an array of components to monitor power generation, consumption, and environmental conditions. While this technology can save end users money, the complexity of installation and maintenance has limited the adoption of microgrids in residential spaces. To simplify this technology for end users, the next evolution of microgrid components includes sensors that are wireless and ambiently powered.

Even with a microgrid installed, significant energy is wasted in residential spaces. To address this loss, energy harvesting …

Ai Trustworthy: Ethical Challenges And Strategies, Jian Liu, Iwan Sandjaja, Donald C. Wunsch

Electrical and Computer Engineering Faculty Research & Creative Works

This paper explores the pivotal role of trust in the widespread application of Artificial Intelligence (AI) across various domains. We review AI applications in sectors like energy, healthcare, and autonomous vehicles and discuss the crisis of human trust they face. This paper introduces a novel framework that delineates the relationship between AI transparency and user trust, highlighting specific industry applications. Through a systematic review of recent literature, we first delve into factors such as emotional response, acceptance, transparency, accuracy, and interpretability that shape human trust in AI. We then underscore the necessity of ethical AI practices and highlight the importance …

Schaeffler Icvd Coating Machine, Louis Mcgrath

Williams Honors College, Honors Research Projects

Chemical Vapor Deposition (CVD) is mutual technology used to deposit thin film through a gaseous phase by vaporizing the solid materials. This conventional process usually requires high thermal stability of the materials, which is not applicable for most of the polymeric materials. Therefore, a novel process, initiated Chemical Vapor Deposition (iCVD) is developed by introducing the gaseous monument and initiator to form the thin film in-situ. By adjusting the free-radical polymerization in the vapor phase, a variety of thin and uniform polymer films can be achieved. Depending on the chemistry, iCVD has many categories. This report explains the design …

Extending Trailer, Alex Grove

Williams Honors College, Honors Research Projects

The goal of this research project is to revolutionize the convenience in towable transportation. This innovative design aims to enhance the versatility of pull-behind trailers by incorporating an extendable feature, allowing users to effortlessly adjust the length according to their specific needs. Whether navigating tight spaces or accommodating extra cargo, our trailer adapts to diverse situations, providing unmatched flexibility. In addition to its adjustable length, the trailer is engineered to be compactable, addressing the storage constraints often faced by users with limited space. The collapsible design ensures easy storage without compromising on functionality, making it an ideal solution for individuals …

Efficient Connectivity Management And Path Planning For Iot And Uav Networks, Amirahmad Chapnevis

Theses and Dissertations

This dissertation explores how to better manage resources in mobile networks, especially for enhancing the performance of Unmanned Aerial Vehicles (UAV)-supported IoT networks. We explored ways to set up a flexible communication architecture that can handle large IoT deployments by making good use of mobile core network resources like bearers and data paths. We developed strategies that meet the needs of IoT networks and enhance network performance. We also developed and tested a system that combines traffic from several mobile devices that use the same user identity and network resources within the core mobile network. We used everyday smartphones, SIM …

Electrochemical-Thermal Model Of A Lithium-Ion Battery, Paul Kalungi

Browse all Theses and Dissertations

Lithium-ion batteries are an integral component of energy storage systems for renewable energy applications owing to their high energy density. Extensive research has therefore been carried out, utilizing both experimental and computational methods, to aid in a deeper understanding of lithium-ion batteries. Challenges related to efficiency, safety and thermal management persist, particularly during high current draw, extreme temperature conditions and extreme dynamic current operation such as in electric vehicles. This thesis work presents an electrochemical-thermal model of a lithium-ion battery that simulates and analyzes the variation of electrical behavior, chemical behavior and thermal behavior. The electrochemical model is developed by …

Guarding The Grid: Exploring Iot And Iiot Security Vulnerabilities In Smart Power Systems, Nicole G. Parker

Honors Undergraduate Theses

The Internet of Things (IoT) encompasses the collective network of electrical devices and the technology that enables them to send and receive data. The use of IoT technologies in industrial settings, such as transportation, manufacturing, and energy is referred to as the Industrial Internet of Things (IIoT). With the expansion of IoT in homes and IIoT in the energy sector has come an increase in the number of devices connected with each other. Engineers have utilized this network to develop sophisticated smart systems that combine sensing, processing, actuation, and control to produce smart environments. Along with the benefits of IoT …

Machine-Learning-Assisted Design Of Deep Eutectic Solvents Based On Uncovered Hydrogen Bond Patterns, Usman Lame Abbas, Yuxuan Zhang, Joseph Tapia, Md Selim, Jin Chen, Jian Shi, Qing Shao

Markey Cancer Center Faculty Publications

Non-ionic deep eutectic solvents (DESs) are non-ionic designer solvents with various applications in catalysis, extraction, carbon capture, and pharmaceuticals. However, discovering new DES candidates is challenging due to a lack of efficient tools that accurately predict DES formation. The search for DES relies heavily on intuition or trial-and-error processes, leading to low success rates or missed opportuni- ties. Recognizing that hydrogen bonds (HBs) play a central role in DES formation, we aim to identify HB features that distinguish DES from non-DES systems and use them to develop machine learning (ML) models to discover new DES systems. We first analyze the …

Multi-Physics Modeling Of Immersion Cooled Electric Power Apparatuses, Reza Ilka

Theses and Dissertations--Electrical and Computer Engineering

Electric power conversion apparatuses such as electromagnetic transformers and power electronic converters play a backbone role in the global power and energy industries, such as power transmission and distribution, electrified transportation vehicle systems, industry automation, and the like. To investigate the performance (efficiency, reliability, etc.) of such critical power conversion apparatuses, high-fidelity multi-physics modeling becomes critical which involves dedicated coupling among multiple physical domains, including electrical, magnetic, thermal, mechanical, and material engineering. Nevertheless, the majority of the existing models for these power conversion apparatuses focus only on one or two physical domains, and the modeling fidelity needs to be further …

Optimal Control And Evaluation Of Shipboard Power Systems, Musharrat Sabah

Theses and Dissertations--Electrical and Computer Engineering

Electric warships are involved in complex missions consisting of multiple simultaneous operations. In order to ensure mission success, future ships must be designed in a way that optimizes their performance in the presence of complex mission loads. The focus of this research is an effort to optimally control the performance of shipboard systems during missions involving multiple scenarios or vignettes. The evaluation of the performance of mission-oriented power systems is based on the degree to which these systems deliver power to the loads required to perform the mission at hand. The performance of such systems involves a dynamic interplay between …

Machine Learning Based Three-Limb Core-Type Transformer Core Aspect Ratios Identification, Ananta Bijoy Bhadra

College of Graduate Studies: Theses & Dissertations

Power transformers are considered one of the key elements of electric grids. Transient studies include transformer transient analysis which is required for the continuous power supply. However, to perform the transient analysis, the details of the internal structure of the transformer are required which are unobtainable and considered as confidential information. Therefore, the application of topological-based transformer models is limited although the models can accurately represent the transformers. To address this concern, a novel approach utilizing Machine Learning (ML) to identify the core aspect ratios of the three-limb core-type transformer is introduced. The proposed approach, using only the voltage and …

Energy Efficiency In Additive Manufacturing: Condensed Review, Ismail Fidan, Vivekanand Naikwadi, Suhas Alkunte, Roshan Mishra, Khalid Tantawi

Engineering Technology Faculty Publications

Today, it is significant that the use of additive manufacturing (AM) has growing in almost every aspect of the daily life. A high number of sectors are adapting and implementing this revolutionary production technology in their domain to increase production volumes, reduce the cost of production, fabricate light weight and complex parts in a short period of time, and respond to the manufacturing needs of customers. It is clear that the AM technologies consume energy to complete the production tasks of each part. Therefore, it is imperative to know the impact of energy efficiency in order to economically and properly …

Re-Envisioning Electric Railway Power Systems In Dense Urban Regions, Rohama Ahmad

Dissertations and Theses

Grid decarbonization and modernization are key requisites to combat global warming. Decarbonization entails the deployment of renewable energy sources, improving the energy efficiency of major consumers, and the electrification of the transportation and building sectors. Various US states and cities have pledged to reduce greenhouse gas (GHG) emissions (e.g., the Climate Leadership and Community Protection Act (CLCPA) in New York aims to reduce emissions to 40% below 1990 levels by 2030 and then to 85% below 1990 levels by 2050) via a set of targets in terms of renewable energy, energy storage system (ESS) capacity, and the number of electric …

Cold Climate Heating Alternatives: A Feasibility Study For Heat Pumps In Far Northern Greenland, Sarah Torpie Hutchinson

Dartmouth College Master’s Theses

Building heating in the Arctic is extremely energy intensive. The cold climate of northern Greenland requires heating year-round. Qaanaaq, the northernmost village in Greenland, has 10,128 average annual heating degree days, in Celsius. Current heating relies on fossil fuels, often from an oil boiler or from diesel-powered district heating. Amidst the global transition of energy supply and consumption to reduce the use of fossil fuels, electrically based heating via heat pumps is becoming an increasingly attractive option to heat buildings more efficiently. Several heat pumps are now designed for cold climates specifically. While studies have investigated the potential and performance …

Runtime Performance Of Gamess Quantum Chemistry Application Offloaded To Gpus, Masha Sosonkina, Gabriel Mateescu, Peng Xu, Tosaporn Sattasathuchana, Buu Pham, Mark S. Gordon, Sarom S. Leang

Electrical & Computer Engineering Faculty Publications

Computational chemistry is at the forefront of solving urgent societal problems, such as polymer upcycling and carbon capture. The complexity of modeling these processes at appropriate length and time scales is mainly manifested in the number and types of chemical species involved in the reactions and may require models of several thousand atoms and large basis sets to accurately capture the chemical complexity and heterogeneity in the physical and chemical processes. The quantum chemistry package General Atomic and Molecular Electronic Structure System (GAMESS) has a wide array of methods that can efficiently and accurately treat complex chemical systems. In this …

Electrospun Pt-Tio₂ Nanofibers Doped With Hpa For Catalytic Hydrodeoxygenation, Amos Taiswa, Randy L. Maglinao, Jessica M. Andriolo, Sandeep Kumar, Jack L. Skinner

Civil & Environmental Engineering Faculty Publications

Electrospinning is utilized to fabricate catalytic nanofiber scaffold for biocrude upgrading in hydrodeoxygenation (HDO) following computational studies suggesting the need for nano-catalysts for efficient HDO conversion and selectivity. Here, Pt-TiO₂ nanofibers are fabricated through electrospinning, followed by wet impregnation with a heteropoly acid (HPA), tungstosilicic acid. Intensive heat treatments were incorporated during and after processes to obtain a HPA doped Pt-TiO₂ nano-catalyst. Catalytic HDO was performed in a batch reactor with phenol as the raw biocrude dissolved in hexadecane. The HPA doped Pt-TiO₂ catalyst demonstrated promising HDO performance of 37.2% conversion and a 78.9% selectivity to oxygen …

Estimation Of Methyl Orange Dye's Molar Absorptivity Using A Photoresistor-Based Photometer, Patricia M. Ludovice, Ramon M. Delos Santos

Physics Faculty Publications

The need to further develop solar cell technology, particularly on dye-sensitized solar cells (DSSCs), drives absorption studies of various chemical species. In this study, absorbance analysis of methyl orange (MO) dye was performed using the adapted and modified photoresistor-based photometer of Adams-McNichol et al. [1]. The research aims to improve the stability of the reference setup, while maintaining the accuracy of absorbance results it yields. The methodology includes photometer fabrication, MO dye sample preparation, and the evaluation of MO dye's molar absorptivity in an aqueous solution. Results show that the estimated molar absorptivity of MO using the voltage readings from …

Structural Construction And Surface Modification Of Copper Current Collectors For Lithium Metal Batteries, Yaohua Liang

Electronic Theses and Dissertations

Graphene, a prevalent anode material in commercial lithium-ion batteries, has reached its theoretical capacity limit. The imperative is to develop high-capacity anode materials to meet the growing demand for energy density. Lithium metal, renowned for its exceptionally high theoretical specific capacity density (3680 mAh g-1) and low reduction potential (-3.04 V, relative to the standard hydrogen electrode), is commonly dubbed the "Holy Grail" for negative electrode materials in high-energy-density batteries. However, practical advancements in lithium metal anodes face obstacles like low Coulombic efficiency, limited cycle life, and heightened reactivity to the electrolyte and internal short circuits resulting from lithium dendrite …

An Integrated Hybrid P2p-Dr Networks For A Transactive Energy Market Platform Considering Electricity Network Constraints, Sheroze Liaquat

Electronic Theses and Dissertations

No abstract provided.

Distribution System Losses Allocation Based On Circuit Theory With Distributed Generation, Ahmed S. Abdelkader, Ibrahim I. Mansy, Abdelfattah A. Eladl

Mansoura Engineering Journal

Electricity energy is the most convenient and efficient form of energy transmission and conversion. Nonetheless, losses take place while electrical power is traveling from power stations through transmission and distribution networks to the loads. Despite the high efficiency of electrical transmission and distribution networks, the huge amounts of power moving through these networks make the financial loss due to the lost energy very high and its management becomes a critical consideration for both utility providers and regulatory bodies. The efficient management of losses encompasses two major functions: the first is running the system in a way that minimizes the losses; …