Power and Energy Commons^™

Cal Poly Electrical Distribution Coordination And Short Circuit Analysis, Alexander Gomez, Kaylynn Rothleder

Electrical Engineering

The purpose of this project is to maintain the California Polytechnic State University Electrical Distribution System by performing short circuit and protective device coordination studies for the Baker Science Building. When a short circuit arises in a system, there is no finite way in telling what protective device will be tripped, which can cause outages, arc flashes and electrical explosions. The best way in determining the outcomes of these occurrences are to perform precise simulated reports. To output these reports, design and analysis of the single line through a commercialized software, Power Tools for Windows (SKM) was used. To name …

Nanogrid Electrical Design And Analysis, Phillip Phung

Electrical Engineering

Power plant generators have quality protection over long-range transmission, but localized generation interacts with multiple power sources, and needs maintenance to ensure grid safety. Localized and distributed generation must solve these issues to remain viable economically and efficiently in power industries. Cal Poly’s Building 20 provides on-campus location to interconnect renewable generation with interconnection disconnect capabilities.

Cal Poly’s grid includes three localized generators flowing through the Cal Poly substation. Unlike other universities which use power from utilities across distant transmission lines, Cal Poly generates energy using onsite generators. Research including additional possible sites of power generation helps determine the effects …

Boost Battery, Samuel Rauch, Alvin Ng, Lacy Sigman

Electrical Engineering

In modern times, the problem of a depleted battery confronts us too often. Whether it appears with a smartphone or with any other electronic device, the situation frustrates all consumers. This project designs and constructs a compact portable battery charger that charges through kinetic energy. Thus, one can perform everyday activities, such as walking or running, and charge up a backup battery with no extra effort or time. Additionally, an attachable band harvests thermal energy to maximize the amount of clean power generated. Energy harvesting from kinetic motion and thermal differences provide users with power when no actual power suppliers …

Buck Converter, Bowen Liu

Electrical Engineering

The recent sustainable energy growth triggered a huge power electronics demand, specifically related to power conversion. My senior project is a design of a buck converter which steps down the voltage from photovoltaic cells ranging from 5 to 40V to a rechargeable battery with 5V. This converter has a high enough power efficiency to effectively convert the energy harnessed from PV panels.

Power Chest Strap, Adrianne Thoroddsson, Dennis Lin

Electrical Engineering

The Power Chest Strap is an unobtrusive device, like a heart rate monitor, worn around the chest that harvests energy from the expansion of the chest during breathing. The chest strap stores electrical energy that can charge electronic devices such as cell phones. Since small portable devices grow in number, the power strap allows a convenient way to charge your device without having to find a wall outlet for a charger. Research on systems that scavenge energy from arm or leg movement already exist, but these systems require the ability of the user to move their arms and legs. The …

Energy Harvesting From Exercise Machines: Lt8705 Dc-Dc Conversion For Elliptical Trainers, Braden Burk, Raj Bhula, Nathan Mckay

Electrical Engineering

Cal Poly’s Energy Harvesting from Exercise Machines (EHFEM) program aims to power the grid using human energy harvested from exercise machines in its gym. Doing so could save the school money and increase the total supply of power available on the grid. This document belongs to one of many groups attempting to design a suitable DC-DC conversion system for an elliptical trainer using an LT8705 Four-Switch Buck-Boost converter. Past teams have built other converters and developed system compatibility characteristics such as filtering, safety, and stability for interfacing components. These teams fall into one of two departments in EHFEM: DC-DC Conversion …

Wirelessly Controlled Smart Outlet, Andrew Godsil, Ariel Dubinsky

Electrical Engineering

Popularity of home automation devices has increased greatly in recent years due to higher affordability and simplicity through smartphone and tablet connectivity. For the purpose of this experiment, we have developed the Smart Outlet: a stand-alone communication unit, used to connect home outlets to the internet. The Smart Outlet controls lighting and simple appliances throughout the home, remotely, using wireless commands from the web. A Google Calendar interface directly controls the outlets’ function by scheduling them with dedicated calendar events. The calendar’s interface can even be accessed from multiple different platforms (i.e. phones, computers, tablets) for the convenience of all …

Microprocessor Management Of Energy Harvesting Buck Boost Converters, Timothy O'Sullivan

Electrical Engineering

No abstract provided.

High Voltage Pulse-Width Generator For The Algae Biofuel Project, Philip Yu, Stephen Leung

Electrical Engineering

This purpose of this project, sponsored by Boeing and advised by Dr. Arakaki and Dr. Taufik, is to build a high voltage pulse width generator that lyses algae cells to harvest the biofuel within. This project uses Emmanuel Loza's thesis on a cascaded high voltage converter with variable control to build a portable pulse width generator with independent control on the peak voltage, pulse width, and frequency. The project focuses on creating a pulse width generator capable of finding the most optimal pulsed electric field to lyse algae. The pulse width module ranges from 10V-80V peak voltage, 60Hz-100 kHz frequency, …

Battery Management System, Michael Desando, Kyle Woody

Electrical Engineering

Problem Statement:

There have been recent reports of multi-million dollar companies having to recall entire projects due to their BMS’s malfunctioning or operating incorrectly. The purpose of this project is to analyze the future of batteries, the Lithium-Ion cell, and to exercise a BMS to better understand its capabilities and possible cases for errors. Lithium ion batteries are intolerant of overcharge and overdischarge. Abuse of this kind can result in high temperatures, venting of gases, fire, or explosion. Therefore battery management systems have been devised to prevent such abuse. Recent events such as fires on the Boeing Dreamliner and the …

Wind And Ventilation Turbine (Wvt) Generator, Anthony Lloyd, Jacob Michener

Electrical Engineering

This project aims to create a more compact and accessible renewable energy source using the Wind and Ventilation Turbine (WVT) Generator. The wind turbine provides ventilation while generating “clean” electricity using solar and kinetic energy. The electrical generation causes no functional losses to the ventilation as rising heat and passing wind turn the turbine, ventilating the house. Placing a generator beneath the spinning turbine allows for the transformation of mechanical motion into electrical energy. The system charges a battery, supplying recharging power into small standard electronics (i.e. cell phones, tablets, etc.) through a USB output.

Buck-Boost Dc-Dc Converter With Input Protection System For The Energy Harvesting From Exercise Machines Project, Byungjae David Yoo, Sheldon Tyler Kong Ming Chu

Electrical Engineering

Cal Poly’s Energy Harvesting from Exercise Machines (EHFEM) project comprises of multiple subprojects seeking to effectively create a sustainable energy source through harvesting electrical energy generated from physical exercise machines. This project designs and implements a Buck-Boost DC-DC converter using a LT3791-1 4-Switch Buck-Boost Controller, replacing the previous SEPIC design. The DC-DC converter must operate within limits set by the maximum input range of the LT3791-1 controller. An input protection system prevents inputs higher than rated values, which may adversely damage the Buck-Boost DC-DC converter. These inputs include overvoltage transients, average voltage, and current output by the Precor EFX 561i …

Piezoelectric Powered Led Street Reflector, Collin Shane Douglass

Electrical Engineering

In many areas of Washington, it rains for a majority of the year. During rainy weather it becomes difficult to see street lanes and dividers, causing hazardous road conditions. The Piezoelectric Powered LED Street Reflector solves this problem. The PPL Street Reflector modifies a street reflector with LED lights. These lights help drivers clearly see where dividers and street lines are in non-ideal weather conditions, such as rain, fog, and snow. The PPL Street Reflector capabilities include harvesting energy through the Piezoelectric Effect, creating a self-sustaining device with minimal maintenance.

Portable Nano Hydro Generator For The Dc House Project, Caleb David Fink, Victor Olusoji Ojewole, Christopher Mapua Tan

Electrical Engineering

This Senior Project entails the design and testing processes of the Portable Nano Hydro Generator for the continuing DC House Project. No natural resources should go unused, especially in developing countries where they are found in abundance. Small streams in particular have potential to further Professor Taufik's DC House Project that will provide electricity to 1.6 billion people in the world without access to electricity upon completion. The goal of this project is to create a small portable generator that utilizes the discharge from small streams and convert it into useable electricity that could charge a car battery as an …

All Purpose Mobile Gps, James C. Smith, Matt Weege, Kevin Peters

Electrical Engineering

The aim of the All Purpose Mobile GPS (The System) is to create a GPS tracking device that can accurately record location and calculate velocity, distance traveled and elevation change even when the satellite signal is lost. This data can later overlay on existing internet-based maps illustrating a trip to oneself or others. The portable tracker consumes very little power achieving several days’ worth of power in a single charge. A solar cell provides a quick battery boost in a pinch. SD Card storage increases compatibility with computers and other forms of data transfer. Data processing, such as viewing the …

Design Improvement For The Smart Dc Wall Plug, Cory Yee, Haoyan Huang

Electrical Engineering

The DC smart wall plug is a subsystem within the Cal Poly DC House Project. The previous version faces challenges supplying DC voltage to meet household appliances’ nominal values. Specifically, it can only output the minimum required voltage for DC appliances to operate, resulting in unwanted power loss. In addition, the maximum output voltage is rated at 15V, which is insufficient to power most DC appliances. This design improvement project incorporates NFC technology as a solution to overcome the power loss and a new buck converter configuration to increase the output voltage range. Additionally, the new design introduces short-circuit and …

Energy Harvesting From Exercise Machines - Dc-Dc Buck Boost Converter (Lt3791), Matthew B. Wong

Electrical Engineering

Cal Poly’s ongoing Energy Harvesting From Exercise Machines (EHFEM) project proposes sustainability and energy saving costs through modifying exercise machines generating DC power, providing a renewable energy resource through physical exercise. The EHFEM project contains multiple sub-projects involving modifying several different exercise machines. Each machine generates DC power and an inverter converts this power to AC. This AC power returns to the grid. This project addresses an issue involving a previously installed DC-DC converter not returning power properly. When generating DC power, the grid demands a specific AC voltage, but the generated power through the previous DC-DC converter and power …

Merry-Go-Round Human Powered Generator, Sarah Lorraine Ashe, Salvador Navarro

Electrical Engineering

How do you bring electricity to families who have limited resources in a developing country? The DC House project, advised by Dr. Taufik, provides a way for kids to have fun, exercise and generate power for their homes – play-park human powered generators. This project intends to create a more efficient and cost effective way for playground equipment to be implemented for power generation. The redesigned and reconstructed merry-go-round human powered generator converts mechanical energy into electrical energy to power the DC house. This was a fully functioning generator that needed a better voltage gain, as well as, a more …

Human-Powered Swing Generator, Danny Cai, Timothy Lai, Brandon Wong

Electrical Engineering

Many developing countries lack sufficient resources to provide enough electricity for every family to live with a satisfying level of comfort and convenience. Our project proposes a solution that provides families with an alternative access to electricity using a playground swing. This project addresses the design and construction of the Human-Powered Swing Generator, which converts mechanical energy to electrical energy for charging a battery. The charged battery serves as a source of DC energy for potential DC purposes, such as charging a cell phone.

Integration Of Pv & Simulated Dc Sources For The Dc House, Arvind Ramesh, Kevin Gingrich, Scott Chau

Electrical Engineering

The DC House, an ever improving project, uses only pure DC power which most renewable energy sources generate, from solar to wind power. The DC House and this project expect a donation of photovoltaic modules to supply a constant source of DC power. At the moment, the DC House desperately needs power sources because not only does the house have various loads unaccounted for, but the distribution system to determine proper power flow needs a redesign. The project chose to account for these issues by implementing a solar panel onto the DC House and a power distribution module to have …

Boosty-Bit: Power For Pint-Sized Projects, Timothy Grijalva

Electrical Engineering

In order to make it easier for hobbyists to create small portable microcontroller based electronics projects, I have created Boosty-bit, a tiny DC-DC boost convert that runs off a single alkaline battery cell (AA or AAA). The Boosty-bit converter can source up to 250mA @ 3.3v, making it ideal for many microcontroller based projects. In addition to power management, Boosty-bit is also physically small, allowing it to fit inside pen/marker-sized enclosures along with a AAA battery and a microcontroller. Boosty-bit aims to be the ideal solution for “makers” who desire portability and compact form factors in their projects.

Portable Nano-Hydro Power Generator For The Dc House Project, Andrew Aw, James Biggs

Electrical Engineering

This senior project report explains the construction and design of a small, portable water generator that converts kinetic energy flowing in small creeks to electrical energy as a renewable source of energy for the DC House. The DC House, in short, is a project to build a self-sustainable house for Third World countries that utilizes only DC electricity. The system consists of two converters and a charge controller for a 12V lead-acid battery. The first converter converts the hydro generator voltage output to 15 Volts for safe and proper charging of the lead-acid battery by the charge controller. The second …

Motor Protection Lab Experiment Using Sel-710, Ozro Corulli

Electrical Engineering

Advancements in microprocessor based relay technology for power protection applications provide quicker response times and new methods of mitigation. This project develops a lab experiment for Cal Poly class EE444 - Power Systems Laboratory based on the Schweitzer SEL-710 motor protection relay. Learning objectives for this lab include relay setup, programming, and protection schemes for the following conditions: undervoltage, loss of phase, fault, locked rotor, and thermal overload. Today, utility companies across the globe use SEL relays for primary system protection, putting engineers familiar with their operation in high demand.

Cal Poly Wind Power Research Center Power Regulator, Ricardo Rodriguez, Steven Bounchareune

Electrical Engineering

Through funding from the California Central Coast Research Partnership (C3RP) the

CPWRC, led by Dr. Patrick Lemieux, has erected a horizontal axis wind turbine (HAWT) at the

Cal Poly Escuela Ranch site EL04. With the help of Dr. John Ridgely and Dr. Art MacCarley, the team has implemented a controller that delivers the power being generated by the turbine to a resistor bank which maintains a safe working speed for the turbine. The authors objectives for this project are to (1) become familiar with the operation of the turbine, (2) develop an AC-DC converter that regulates the output of the …

Unipolar Pulse Width Modulation Inverter, Randy Baggao, Gabriel Tam

Electrical Engineering

This project portrays the design and construction of a pulse width modulation (PWM) inverter. The inverter is implemented as a unipolar converter. The inverter provides a steady single-phase sinusoidal 60Hz AC voltage output from a DC input. This is a basic DC-AC power converter that is built in 3 separate phases and integrated altogether at the end. The inverter can be broken down into the control unit, firing circuit, and the H-bridge. By using the PWM method, one can control the frequency and amplitude of the output by using a reference signal. This method will also avoid using a transformer …

Low Speed Alternator Design, Scott Merrick

Electrical Engineering

No abstract provided.

Micro Hydropower System, Christpher Neally, Ian Verstuyft

Electrical Engineering

The micro hydropower project strives to meet the needs of a specific village in northern Thailand in partnership with Engineers Without Borders. Specifically, the electrical side of the system must be designed to convert the mechanical power of a flowing river that is turning a turbine into sustainable and dependable power. Currently available hydropower systems will be considered, analyzed, and tailored to suit the specific needs of the community in need. The system to be designed will be flexible enough to demonstrate proof-of-concept with the limited maximum generable power in lab while having the ability to be easily scaled for …

Ocean Wave Generator Using Electromagnetic Induction, Sutton Smiley, Adam Mccuistion

Electrical Engineering

No abstract provided.

Off Grid Solar Powered Street Light, Justin Fang, Billy Pham

Electrical Engineering

Street lights are fixtures found in every city and serve the important purpose of illuminating the streets and keeping the roads safe for pedestrians and drivers. Current street lights are powered by the grid, power which is paid for by the taxpayers and could have been used to power homes instead. With this project, our goal is to design and implement an electric power system that collects and stores solar energy, and delivers power to an LED smart street light. The resulting system would reduce street light energy costs by 100% since they would not draw any power from the …

Energy Dashboard Tool For Cal Poly Dormitories, Katie Zombro

Electrical Engineering

This project defines the needs, uses, and future projects (as well as business cases and procurement) of a University Housing dashboard tool, utilized by the Red Brick Dormitories on the Cal Poly campus. This easily accessed tool provides simple information regarding energy trending data, allowing for all student residents no matter their academic discipline, to understand their energy trends and opportunities for reduction. With the Energy Dashboard in place, Cal Poly’s red brick dormitories experienced savings ranging from 10%-20% from the 2011-2012 school year baseline, by the end of the 2012-2013 academic year. With the help of the Dashboard, competitions …