Power and Energy Commons^™

Multi-Objective Optimization Of Energy Costs And Ev Battery Health In V2g Enabled Homes, Dzifa M. Hodey

Theses and Dissertations--Computer Science

Electric vehicles (EVs) and rooftop solar photovoltaic (PV) systems are increasingly being integrated into residential settings, creating new opportunities for vehicle-to-grid (V2G) and vehicle-to-home (V2H) operations. In these systems, the EV battery functions as a controllable energy storage unit that can charge from the grid or PV and discharge energy to supply household load or export to the grid for a profit. By intelligently scheduling this bidirectional power exchange, households can reduce electricity costs and enhance PV utilization. Realizing these benefits requires optimization strategies that balance cost reduction with EV battery health preservation. However, existing V2G/V2H studies largely emphasize cost …

Report On The First Year Of Operation Of Kentucky’S First Utility Wind Turbine, Lawrence E. Holloway, Sophia A. Hahn, Aron Patrick

Electrical and Computer Engineering Faculty Publications

This report examines the first year’s operational data from Kentucky’s first utility wind turbine, the 37 m hub-height 90-kilowatt NPS100C-27, operated by the PPL Corporation Research and Development at their Renewable Integration Research Facility in Mercer County, Kentucky. During that year, the turbine was available 95% of the time, spinning 85% of the time, and generating power 78% of the time, and had a net capacity factor of 11%. This report analyzes the turbine performance and uses the collected wind data to project the performance of an example turbine more typical of larger commercial turbines recently installed elsewhere in the …

Lagrange Multipliers As A Metric For Early-Stage Shipboard Power System Design, Magdalen A. Barnes

Theses and Dissertations--Electrical and Computer Engineering

Integrated power systems are essential in the operation of electric ships and must function under a diverse range of conditions. In addition to routine operation, ships should be prepared to respond to challenging events that require significant amounts of power. Demanding scenarios, coupled with complex and interconnected power systems, present challenging issues. The power and energy ratings of equipment are crucial factors in the operational success of the ship; however, to meet economic constraints, balance between performance and cost must be upheld. Details regarding equipment models and specifications are typically unavailable during early-stage design. Power system modeling and simulation can …

The Rhythm Of Renewables: Minute-By-Minute Insights From Kentucky, David S. Beyerle, Noah M. Stewart, Shaun E. Lavin, Chad C. Alkire, Heather Nikolic, Samuel Kelty, Ezekiel A. Boggs, Declan Boyle, Lawrence E. Holloway, Aron Patrick

Electrical and Computer Engineering Faculty Publications

Kentucky’s renewable energy landscape beats with a distinct rhythm shaped by ever-changing variations in sunlight, wind, rainfall, and the ever-modernizing grid that connects them. This paper analyzes minute-by-minute performance data from seven renewable and storage assets owned and operated by the PPL Corporation in Kentucky, including hydroelectric, solar, wind, and lithium-ion battery systems. Using a full year of synchronized, high-resolution data from multiple sites in the Commonwealth, the study examines daily and seasonal capacity factor trends, explores correlations among generation types, and evaluates their alignment with utility load profiles. Our analysis found 279 hours—about 3.2% of the year—with zero renewable …

Voltage And Var Control And Real-Time Digital Simulator-Based Protection System Testing For Power Distribution Systems, Gaurav Yadav

Theses and Dissertations--Electrical and Computer Engineering

Rising power demand calls for electric distribution systems to manage peak load. One option is reducing feeder voltage, which lowers voltage-dependent load demand and may also reduce energy usage. The technique, known as Conservation Voltage Reduction (CVR), may operate independently or within a volt/var control system. This dissertation examines CVR factor calculation using measurements collected at the substation, and proposes a curve-fitting and artificial neural network method to estimate active power losses using input active power, reactive power, and substation voltage. As utilities integrate more inverter-based resources (IBRs) to support increasing demand, rapid voltage fluctuations arise due to the intermittent …

Modeling And Analysis Of Amorphous Steel Transformer For Potential Loss Reduction In Power Systems., Daniel A. Muchow

Theses and Dissertations--Electrical and Computer Engineering

The energy consumed in power systems can be reduced directly by implementing new technologies and materials. The effort to reduce the carbon emissions expelled from the production of electrical energy has become a major focus. According to the U.S. energy Information Administration approximately 5% of all the electric generated and transmitted in the U.S. electrical grid is lost. The energy profile calculated from the usage of electrical power from all 50 states in 2021 is estimated to be 3.8 billion megawatts per hour, with a state average of just over 11 cents per MWh, producing just over 41.8 billion in …

Fault Identification And Localization In Distribution Grids Based On An Attention-Hybrid Graph Neural Network, Xingjian Shan

Theses and Dissertations--Electrical and Computer Engineering

This thesis proposes a multi-task fault diagnosis framework for distribution systems based on Graph Convolutional Networks (GCN) and an enhanced Graph Attention Network (GATv2). By representing the power grid as a graph with electrical features and topological connections, the model simultaneously performs fault type classification and fault location prediction. The architecture incorporates residual connections, multi-head attention, and a Jumping Knowledge module to capture multi-scale structural patterns, while dynamic loss weighting ensures balanced task optimization under noise and sparsity. Experimental results on the IEEE 123-node test feeder demonstrate a fault classification accuracy of 96.43%, and fault localization accuracies of 84.64% (strict), …

Mathematical-Programming Modeling Of Power-Electronics-Based Microgrid Systems, Jack A. Robey

Theses and Dissertations--Electrical and Computer Engineering

The emergence of power-electronics-based microgrid systems is driven by the shift to cleaner energy, transportation electrification, renewable integration, grid modernization through smart grid advancements, and growing demand for energy-efficient solutions. For utilities, these systems present unique opportunities for enhancing grid resilience, improving load management, and enabling distributed energy resource integration. This work presents a modeling and simulation approach for microgrid systems that uses mathematical programming to represent power flow and capture the system dynamics. By solving an optimization problem at each time step, the method enables evaluation of power distribution and system performance under a range of operating conditions, without …

Lifecycle Carbon Footprint And Sustainability Evaluation Of Dram-Based Processing In Memory Computing Architectures, Samrat Pravin Patel

Theses and Dissertations--Electrical and Computer Engineering

The use of computing technologies has significantly enhanced several aspects of our day-to-day lives. But it has still revealed significant environmental concerns, primarily related to greenhouse gas emissions and energy consumption. Initially, the primary environmental problems associated with computing were energy consumption during device operation. However, with the rapid advancement of technology and increasing computational demands, attention has shifted towards the embodied carbon footprint. This term refers to the total greenhouse gas emissions throughout a product’s lifecycle from the extraction of raw materials to end-of-life processing. It has become increasingly significant in the context of manufacturing integrated circuits (ICs), such …

Scalable Systems And Devices For Wireless Charging Of Electric Vehicles, Donovin D. Lewis

Theses and Dissertations--Electrical and Computer Engineering

The rising adoption of electric vehicles creates new opportunities that are not possible with conventional gas-powered vehicles such as wireless charging of electric vehicles (EV). Wide-scale implementation of wireless charging could result in benefits unique to EVs such as operation without human intervention, improved charging accessibility, and even in-route wireless charging for charge-sustaining or extended driving range operation. As the technology is in the early stages of development, there are many open-ended challenges to tackle including but not limited to coil and systems cost, weight and size, stray field emissions in high-power, high-frequency operation, and dynamic wireless charging system design …

Analysis And Design Optimization Of Electric Machines With Field Intensifying Configuration, Ali Mohammadi

Theses and Dissertations--Electrical and Computer Engineering

The design and optimization of electric machines face increasing demands for efficiency, improved torque density, manufacturability, and effective utilization of materials. Meeting these demands is particularly vital in for example, electric vehicles (EVs) and renewable energy systems, where performance, reliability, and cost are critical. In this dissertation innovative field-intensifying electric machine configurations have been explored, emphasizing advanced topologies, computational modeling, and optimization techniques to advance the state of the art in electric machine design and analysis.

Electric machines with high torque density are essential for many low-speed direct-drive systems, such as wind turbines, in-wheel traction, and industrial automation. This dissertation …

Multi-Objective Design Optimization Of Power Converters For Electric Aircraft Propulsion, Ben Luckett

Theses and Dissertations--Electrical and Computer Engineering

As global focus shifts to the electrification of the aviation sector, the need for high efficiency, lightweight, and reliable electric aircraft propulsion power converter systems has become apparent. These goals can be somewhat conflicting with each other, and a single multi-domain-optimized solution is not guaranteed. The search for a design which presents satisfactory merits becomes a drudge through various trade-off studies which can expend vast quantities of manpower and time. As a remedy to this, design automation allows the process to be computer-assisted. This dissertation presents the core fundamentals for a general multi-objective design optimization framework intended for the design …

Causes And Prevention Of Thermal Runaway In Lithium-Ion Batteries — A U.S. Utility Perspective, Shaun Lavin, Kwabena Kyeremeh, Elias Nemeh, David Beyerle, Chad Alkire, Samuel Kelty, Lakshmi Srinivasan, Stephanie Shaw, Erin Minear, Haresh Kamath, Dan Ionel, Aron Patrick

Power and Energy Institute of Kentucky Faculty Publications

Lithium-ion batteries are a critically important technology for maintaining grid reliability with the integration of variable intermittent renewable energy resources. However, lithium-ion batteries also pose significant human safety and infrastructure hazards due to the inherent risk of thermal runaway, fire, and explosion, which should be understood, mitigated, and managed. While battery manufacturers have primary responsibility for the design, manufacturing, and software which are necessary to keep battery storage systems safe, electric utilities also have an important role in understanding these risks and adopting best practices to mitigate them. This paper provides background on utility-scale battery deployment, an overview of a …

Ultra‐Fast Finite Element Analysis Of Coreless Axial Flux Permanent Magnet Synchronous Machines, Yaser Chulaee, Dan Ionel

Power and Energy Institute of Kentucky Faculty Publications

Large‐scale design optimisation techniques enable the design of high‐performance electric machines. Electromagnetic 3D finite element analysis (FEA) is typically employed in optimisation studies for accurate analysis of axial flux permanent magnet(AFPM) machines, which require extensive computational resources. To reduce the computational burden, a FEA‐based mathematical method relying on the geometric and magnetic symmetry of coreless AFPM machines is proposed to estimate the machine performance indicators using the least number of FEA solutions, thereby significantly lowering the running time. This method is generally applicable to AFPM machines with low saturation effects and cogging torque as exemplified for a printed circuit board …

Design Optimization Of A Direct-Drive Wind Generator With A Reluctance Rotor And A Flux Intensifying Stator Using Different Pm Types, Ali Mohammadi, Oluwaseun A. Badewa, Yaser Chulaee, Donovin D. Lewis, Somasundaram Essakiappan, Madhav Manjrekar, Dan M. Ionel

Power and Energy Institute of Kentucky Faculty Publications

This paper presents a large-scale multi-objective design optimization for a direct-drive wind turbine generator concept that is based upon an experimentally validated computational model for a small-scale prototype motor of the same type. By integrating an outer reluctance-type rotor and a segmented stator with toroidally wound single-coil modules containing spoke-type PMs, the design optimization aims to minimize losses, active mass, and torque ripple while adhering to a power factor constraint. The AC windings and PMs are positioned in the stator and this concept enhances flux concentration, enabling the use of more affordable high energy non-rare-earth (special type) magnets. The exterior …

Rethinking Wind In Kentucky, Lawrence E. Holloway, Aron Patrick, Dan M. Ionel

Power and Energy Institute of Kentucky Faculty Publications

Recent analyses and developments suggest that wind energy could play a role in Kentucky's future power generation mix. This recent change in outlook for Kentucky wind has been driven by three factors: (1) improved wind turbine technologies, (2) improved economics, and (3) recent analyses showing improved grid reliability due to wind's complementarity to solar power generation.

The Impact Of Dissolved Organic Matter On Photodegradation Rates, Byproduct Formations, And Degradation Pathways For Two Neonicotinoid Insecticides In Simulated River Waters, Josephus F. Borsuah, Tiffany L. Messer, Daniel D. Snow, Steven D. Comfort, Shannon Bartelt-Hunt

UK CARES Faculty Publications

The influences of dissolved organic matter (DOM) on neonicotinoid photochemical degradation and product formation in natural waters remain unclear, potentially impacting the sustainability of river systems. Therefore, our overall objective was to investigate the photodegradation mechanisms and phototransformation byproducts of two neonicotinoid pesticides, imidacloprid and thiamethoxam, under simulated sunlight at the microcosm scale, to assess the implications of DOM for insecticide degradation in rivers. Direct and indirect photolysis were investigated using twelve water matrices to identify possible reaction pathways with two DOM sources and three quenching agents. Imidacloprid, thiamethoxam, and potential degradants were measured, and reaction pathways identified. The photodegradation …

Design And Control Of Axial Flux Permanent Magnet Coreless Machines With Special Windings, Yaser Chulaee

Theses and Dissertations--Electrical and Computer Engineering

Permanent magnet synchronous machines (PMSMs), particularly those of the axial flux type, are being researched and developed for various applications such as HVAC systems, aviation propulsion, and electric vehicles. The coreless (air-cored) stator axial flux permanent magnet (AFPM) machine topology offers notable advantages over conventional designs by eliminating magnetic cores and their associated losses. These advantages include potentially higher efficiency, zero cogging torque, and reduced audible noise and vibration. Eliminating the magnetic core also allows for more effective cooling systems, as coolants can be in direct contact with the stator windings, potentially improving power density and specific torque.

The absence …

Machine-Learning-Assisted Design Of Deep Eutectic Solvents Based On Uncovered Hydrogen Bond Patterns, Usman Lame Abbas, Yuxuan Zhang, Joseph Tapia, Md Selim, Jin Chen, Jian Shi, Qing Shao

Markey Cancer Center Faculty Publications

Non-ionic deep eutectic solvents (DESs) are non-ionic designer solvents with various applications in catalysis, extraction, carbon capture, and pharmaceuticals. However, discovering new DES candidates is challenging due to a lack of efficient tools that accurately predict DES formation. The search for DES relies heavily on intuition or trial-and-error processes, leading to low success rates or missed opportuni- ties. Recognizing that hydrogen bonds (HBs) play a central role in DES formation, we aim to identify HB features that distinguish DES from non-DES systems and use them to develop machine learning (ML) models to discover new DES systems. We first analyze the …

Multi-Physics Modeling Of Immersion Cooled Electric Power Apparatuses, Reza Ilka

Theses and Dissertations--Electrical and Computer Engineering

Electric power conversion apparatuses such as electromagnetic transformers and power electronic converters play a backbone role in the global power and energy industries, such as power transmission and distribution, electrified transportation vehicle systems, industry automation, and the like. To investigate the performance (efficiency, reliability, etc.) of such critical power conversion apparatuses, high-fidelity multi-physics modeling becomes critical which involves dedicated coupling among multiple physical domains, including electrical, magnetic, thermal, mechanical, and material engineering. Nevertheless, the majority of the existing models for these power conversion apparatuses focus only on one or two physical domains, and the modeling fidelity needs to be further …

Optimal Control And Evaluation Of Shipboard Power Systems, Musharrat Sabah

Theses and Dissertations--Electrical and Computer Engineering

Electric warships are involved in complex missions consisting of multiple simultaneous operations. In order to ensure mission success, future ships must be designed in a way that optimizes their performance in the presence of complex mission loads. The focus of this research is an effort to optimally control the performance of shipboard systems during missions involving multiple scenarios or vignettes. The evaluation of the performance of mission-oriented power systems is based on the degree to which these systems deliver power to the loads required to perform the mission at hand. The performance of such systems involves a dynamic interplay between …

Torque And Power Capabilities Of Coreless Axial Flux Machines With Surface Pms And Halbach Array Rotors, Yaser Chulaee, Donovin Lewis, Matin Vatani, John F. Eastham, Dan Ionel

Power and Energy Institute of Kentucky Faculty Publications

This paper investigates employing a Halbach PM rotor array to increase torque and power density within coreless axial flux permanent magnet (AFPM) machines. Analytical and 2/3-dimensional finite element analysis (FEA) methods are developed to study torque and power capabilities within an example double-rotor, single-stator coreless AFPM machine with a PCB stator. Compared to a surface PM topology of the same mass and volume, employing a Halbach array increases torque density by as much as 30% through increased airgap flux density amplitude. Multiple parametric studies are performed to explore methods of increasing torque and power density while employing Halbach arrays combined …

Design Optimization Of A Direct-Drive Wind Generator With Non-Rare-Earth Pm Flux Intensifying Stator And Reluctance Rotor, Ali Mohammadi, Oluwaseun A. Badewa, Yaser Chulaee, Dan Ionel, Somasundaram Essakiappan, Madhav Manjrekar

Power and Energy Institute of Kentucky Faculty Publications

This paper presents a multi-objective design optimization for a novel direct-drive wind turbine generator. The proposed electric machine topology employs an outer rotor of the reluctance type and a special modular stator including three phase-windings and spoke-type permanent magnets (PMs). Each stator module includes a single coil toroidally wound around the ferromagnetic core. Consecutive stator modules are separated by PMs and include coils belonging to a different phase. An optimization method with three objectives: total power loss, weight, and torque ripple, and with one constraint for a minimum acceptable value for the power factor, is described. The design examples are …

Decarbonization Analysis For Thermal Generation And Regionally Integrated Large-Scale Renewables Based On Minutely Optimal Dispatch With A Kentucky Case Study, Donovin Lewis, Aron Patrick, Evan S. Jones, Rosemary E. Alden, Abdullah Al Hadi, Malcolm D. Mcculloch, Dan Ionel

Power and Energy Institute of Kentucky Faculty Publications

Decarbonization of existing electricity generation portfolios with large-scale renewable resources, such as wind and solar photo-voltaic (PV) facilities, is important for a transition to a sustainable energy future. This paper proposes an ultra-fast optimization method for economic dispatch of firm thermal generation using high granularity, one minute resolution load, wind, and solar PV data to more accurately capture the effects of variable renewable energy (VRE). Load-generation imbalance and operational cost are minimized in a multi-objective clustered economic dispatch problem with various generation portfolios, realistic generator flexibility, and increasing levels of VRE integration. The economic feasibility of thermal dispatch scenarios is …

Circulating And Eddy Current Losses In Coreless Axial Flux Pm Machine Stators With Pcb Windings, Yaser Chulaee, Donovin Lewis, Ali Mohammadi, Greg Heins, Dean Patterson, Dan Ionel

Power and Energy Institute of Kentucky Faculty Publications

Printed circuit board (PCB) stators in coreless axial flux permanent magnet (AFPM) machines have been proposed, designed, and studied for use in multiple industries due to their design flexibility and reduction of manufacturing costs, volume, and weight compared to conventional stators. This paper investigates mechanisms and methods of approximating open circuit losses in PCB stators within example wave and spiral winding topologies for a dual rotor, single stator configuration using 3D FEA, analytical hybrid techniques and experiments. The effect of rotor magnet shape, end winding, and active conductor geometry on eddy currents is studied, and some mitigation techniques are proposed. …

Life Cycle Assessment Of Air Classification As A Sulfur Mitigation Technology In Pine Residue Feedstocks, Ashlee Edmonson

Theses and Dissertations--Biosystems and Agricultural Engineering

Sulfur accumulation during biofuel production is pollutive, toxic to conversion catalysts, and causes the premature breakdown of processing equipment. Air classification is an effective preprocessing technology for ash and sulfur removal from biomass feedstocks. A life cycle assessment (LCA) sought to understand the environmental impacts of implementing air classification as a sulfur-mitigation technique for pine residues. Energy demand and material balance for preprocessing were simulated using SimaPro and the Argonne National Laboratory’s GREET model, specifically focusing on comparing the global warming potential (GWP) of grid electricity versus bioelectricity scenarios. Overall, the grid electricity scenario had a GWP impact over 7 …

Peer-To-Peer Energy Trading In Smart Residential Environment With User Behavioral Modeling, Ashutosh Timilsina

Theses and Dissertations--Computer Science

Electric power systems are transforming from a centralized unidirectional market to a decentralized open market. With this shift, the end-users have the possibility to actively participate in local energy exchanges, with or without the involvement of the main grid. Rapidly reducing prices for Renewable Energy Technologies (RETs), supported by their ease of installation and operation, with the facilitation of Electric Vehicles (EV) and Smart Grid (SG) technologies to make bidirectional flow of energy possible, has contributed to this changing landscape in the distribution side of the traditional power grid.

Trading energy among users in a decentralized fashion has been referred …

Building Energy Modeling And Studies Of Electric Power Distribution Systems With Distributed Energy Resources, Evan S. Jones

Theses and Dissertations--Electrical and Computer Engineering

There is significant opportunity for savings in energy and investment from improved performance of electric Power Distribution Systems (PDSs) through optimal planning and operation of conventional voltage-controlling devices. Novel multi-step model conversion and optimal capacitor planning (OCP) procedures are proposed for large-scale utility PDSs and are exemplified with an existing utility circuit of approximately 4,000 buses. Simulated optimal control and operation is achieved with a cluster-based approach that utilizes load-forecasting to minimize equipment degradation by intelligently dispersing device setting adjustments over time such that they remain most applicable. Improved performance may also be achieved through smart building technologies and Virtual …

Optimal Design Of Special High Torque Density Electric Machines Based On Electromagnetic Fea, Murat G. Kesgin

Theses and Dissertations--Electrical and Computer Engineering

Electric machines with high torque density are essential for many low-speed direct-drive systems, such as wind turbines, electric vehicles, and industrial automation. Permanent magnet (PM) machines that incorporate a magnetic gearing effect are particularly useful for these applications due to their potential for achieving extremely high torque density. However, when the number of rotor polarities is increased, there is a corresponding need to increase the number of stator slots and coils proportionally. This can result in manufacturing challenges. A new topology of an axial-flux vernier-type machine of MAGNUS type has been presented to address the mentioned limitation. These machines can …

Application Of Conventional Feedforward And Deep Neural Networks To Power Distribution System State Estimation And State Forecasting, James Paul Carmichael

Theses and Dissertations--Electrical and Computer Engineering

Classical neural networks such as feedforward multilayer perceptron models (MLPs) are well established as universal approximators and as such, show promise in applications such as static state estimation in power transmission systems. This research investigates the application of conventional neural networks (MLPs) and deep learning based models such as convolutional neural networks (CNNs) and long short-term memory networks (LSTMs) to mitigate challenges in power distribution system state estimation and forecasting based upon conventional analytic methods. The ability of MLPs to perform regression to perform power system state estimation will be investigated. MLPs are considered based upon their promise to learn …