Power and Energy Commons^™

Towards Optimal And Resilient Ac/Dc Microgrids: Control Design, Analysis, And Implementation, Jun Zhang

Electronic Theses and Dissertations

Microgrids serve as a small-scale power grid for utilizing renewable energy to enhance energy reliability, sustainability, and resilience. As an autonomous system, an islanded microgrid can disconnect from the utility grid and operate independently by maintaining system voltage and frequency. However, this new feature introduces coordination problems among distributed generators (DGs), such as 1) how to make sure the voltage profile and current sharing in DC microgrid with different types of converters; 2) how to reduce the impact of cyberattack when the system coordination is performed based on communication, and 3) how to calculate the steady state under a droop …

Distributed Energy Resources (Der) Capacity Estimation With Spatiotemporal Downscaling For Transmission And Distribution Coordination, Abhilasha Suvedi

Electronic Theses and Dissertations

The primary objective of this thesis is to accurately estimate the capacity of distributed energy resources (DERs) using the spatiotemporally downscaled local solar irradiance for their efficient integration into transmission-level grid operations. Accurate estimation of DER capacity is crucial for their enhanced integration into real-time electricity markets. Different methods of spatiotemporally downscaling the solar irradiance are presented in this thesis, followed by their integration into the 12 house distribution network – a low voltage residential distribution system. Grid support functions (GSFs) like Volt-Watt Control, Volt-VAR control, and Frequency-Watt Control are applied to effectively regulate the frequency and maintain the voltage …

Structural Construction And Surface Modification Of Copper Current Collectors For Lithium Metal Batteries, Yaohua Liang

Electronic Theses and Dissertations

Graphene, a prevalent anode material in commercial lithium-ion batteries, has reached its theoretical capacity limit. The imperative is to develop high-capacity anode materials to meet the growing demand for energy density. Lithium metal, renowned for its exceptionally high theoretical specific capacity density (3680 mAh g-1) and low reduction potential (-3.04 V, relative to the standard hydrogen electrode), is commonly dubbed the "Holy Grail" for negative electrode materials in high-energy-density batteries. However, practical advancements in lithium metal anodes face obstacles like low Coulombic efficiency, limited cycle life, and heightened reactivity to the electrolyte and internal short circuits resulting from lithium dendrite …

An Integrated Hybrid P2p-Dr Networks For A Transactive Energy Market Platform Considering Electricity Network Constraints, Sheroze Liaquat

Electronic Theses and Dissertations

No abstract provided.

Session 12: Analysis Of State And Parameter Estimation Techniques Using Dynamic Perturbation Signals, Timothy M. Hansen

SDSU Data Science Symposium

The trend in electric power systems is the displacement of traditional synchronous generation (e.g., coal, natural gas) with renewable energy resources (e.g., wind, solar photovoltaic) and battery energy storage. These energy resources require power electronic converters (PECs) to interconnect to the grid and have different response characteristics and dynamic stability issues compared to conventional synchronous generators. As a result, there is a need for validated models to study and mitigate PEC-based stability issues, especially for converter dominated power systems (e.g., island power systems, remote microgrids).

This presentation will introduce methods related to dynamic state and parameter estimation via the design …

Electrode And Electrolyte Design To Develop Advanced Battery Technologies For Large Scale Energy Storage, Wei He

Electronic Theses and Dissertations

Large-scale energy storage devices play a key role in regulating the renewable energy to build a carbon-free sustainable future, but the widely used lithium-ion batteries cannot meet the demands because of the limited lithium resource and high cost. Thus, it is urgent to develop next-generation battery technologies with low cost and high safety. Sodium-ion battery is considered as a promising candidate due to the abundant sodium resources and low cost. Its practical application, however, is hindered by the absence of the advanced electrode materials. The tin-based anodes deliver high theoretical capacities and show great promise for the sodium-ion batteries, but …

Nitrogen Plasma Treatment On Triple Cation Mixed Halide Perovskite Surface For High Efficiency Perovskite Solar Cells, Buddhi Sagar Lamsal

Electronic Theses and Dissertations

No abstract provided.

Nio Nanoparticles-Decorated Carbon Fiber Cloth As Lithiophilic Host Material For Stable Lithium Metal Batteries, Sarwar Ahmed

Electronic Theses and Dissertations

Lithium metal is considered the Holy Grail for the anode for next-generation rechargeable batteries. Lithium metal has the highest theoretical capacity and lowest anode potential with respect to the standard hydrogen electrode (SHE). However, its commercialization is hindered by uncontrolled dendrite growth, weak solid electrolyte interphase (SEI), and low coulombic efficiency. The dendrite formation leads to a short circuit between the anode and cathode, which creates a dangerous safety issue. Several host materials and artificial SEI layers have been developed to suppress these issues. However, the effectiveness of these solutions is limited. More research is needed to develop more efficient …

Dynamic Modeling Of Commercial-Off-The-Shelf Smart Inverters Using Power-Hardware-In-The-Loop, Bidur Poudel

Electronic Theses and Dissertations

Inverter-based generation is replacing synchronous-based generation in the power grid. In the past, due to the dominance of synchronous-based generation, inverter-based generation dynamics were typically under-modeled as they made little contribution to voltage and frequency control. Looking at the present context, several disturbances, like the Blue Cut Fire (CA), on August 16, 2016, the South Australian Blackout on September 28, 2016, and the Canyon Two Fire Disturbance (CA) on October 9, 2017, etc., are caused by the influence of converter-based resources. So, for converter-dominated power system stability analysis and control, the dynamics of an inverter-based system cannot be under-modeled. In …

Evaluating The Impact Of Increased Cycling On Thermal Power Plants Due To Wind Energy Penetration In The Midwest: A Case Study, Joscelyne Larson

Electronic Theses and Dissertations

One of the most significant shifts in the mix of U.S. electricity generation over the past few years has been the rapid expansion of renewable energy resources, especially solar and wind. However, fossil fuels are still necessary to fulfill the world’s energy requirements. Despite efforts to increase the use of renewable energy sources, these sources can be at times unreliable, causing countries around the world to continue to rely on base load units such as coal and natural gas. This decrease in fossil fuels and increase in renewable energy sources presents many complex issues in terms of power system planning, …

Automatic Data-Driven Partitioned Modeling Of Power System Dynamics With Smart Power Electronic Inverters, Sunil Subedi

Electronic Theses and Dissertations

The primary aim of this dissertation is to provide an efficient statistical modeling and simulation technique for extracting the dynamics of converter-dominated power systems (CDPS) with the device level details using the least amount of computation time while maintaining a reasonable level of accuracy. These test cases are intended for use by power system researchers that need to develop test cases that can perform accurate dynamic analysis on a high integration of inverter-based resources (IBRs) for stability analysis while speeding up simulation time and reducing computational complexity. Additionally, utilities/grid operators must properly plan, operate, and dispatch. Case studies that can …

Probing Signal-Based Data-Driven Modeling Of Power Electronics Smart Converter Dynamics Using Power Hardware-In-The-Loop, Nischal Guruwacharya

Electronic Theses and Dissertations

The main objective of this dissertation is to develop a generalized simulation and modeling framework for extracting dynamics of power electronic converters (PECs) with grid support functions (GSFs) and validate model accuracy through experimental comparison with physical measurements. The dynamic models obtained from this modeling framework aim to facilitate accurate dynamic analysis of a highly integrated power system comprising inverter-based resources (IBRs), specifically for stability assessment. These dynamic models helped in reducing simulation time and computational complexity, thereby enhancing efficiency. Moreover, it provides valuable insights for utilities and grid operators involved in effective system planning, operation, and dispatch. The dynamics …

Superhalogen-Based Li-Rich Anti-Perovskite Superionic Conductors, Md Mominul Islam

Electronic Theses and Dissertations

Solid-state batteries are being widely explored to meet next-generation energy storage demand with a great potentiality of achieving high energy and power densities at All-solidstate Lithium-ion batteries (LIBs). In recent years, electronically inverted lithium-rich antiperovskite (LiRAP) solid electrolytes with the formula Li3OX, where X is a halogen or mixture of halogens have appeared as a prospective alternative of the commercially available flammable and corrosive organic liquid electrolytes because of their high ionic conductivity, structural variety, and wide electrochemical window. Here, For the first time, we have successfully formulated and synthesized a completely new class of super halogen based double anti-perovskite …

Heuristic Algorithms For Transmission Switching To Reduce Load Shedding, Tanveer Hussain

Electronic Theses and Dissertations

No abstract provided.

Efficient Numerical Optimization For Parallel Dynamic Optimal Power Flow Simulation Using Network Geometry, Rylee Sundermann

Electronic Theses and Dissertations

In this work, we present a parallel method for accelerating the multi-period dynamic optimal power flow (DOPF). Our approach involves a distributed-memory parallelization of DOPF time-steps, use of a newly developed parallel primal-dual interior point method, and an iterative Krylov subspace linear solver with a block-Jacobi preconditioning scheme. The parallel primal-dual interior point method has been implemented and distributed in the open-source PETSc library and is currently available. We present the formulation of the DOPF problem, the developed primal dual interior point method solver, the parallel implementation, and results on various multi-core machines. We demonstrate the effectiveness our proposed block-Jacobi …

Artificial Solid Electrolyte Interface With Superhalogen-Based Double Antiperovskite Li6os(Bh4)2 Materials For Dentrite-Free And Stable Lithium Metal Batteries, Gazi Mahfujul Alam

Electronic Theses and Dissertations

Lithium (Li) metal is regarded as the most propitious anode material for next-generation battery technologies owing to its incredibly high theoritical capacity (3860 mAh g-1) and the most negative electrochemical equilibrium potential (-3.04 V vs standard hydrogen electrode). However, the practical implementation of Li anode in commercial lithium batteries is severely inhibited by the unstable solid liquid interfaces resulting from the ultrahigh reactivity, which leads to dendrite growth, low coulombic efficiency, extreme volume fluctuation, and even safety concerns. For a stable and efficient lithium anode to build next generation Li metal battery, in this thesis, we have tried to solve …

Optimization Based Parameter And State Estimation Framework For Remote Microgrid Frequency Dynamics Modeling Using Probing Signals From Energy Storage Systems, Manisha Rauniyar

Electronic Theses and Dissertations

The primary aim of this thesis is to deliver an efficient design and selection of probing signal needed to estimate state and parameters representing the power system frequency dynamics with the proposed estimation technique in real-time with minimum computational time and cost. These test cases are designed for power system researchers that need to estimate and control analysis at the remote microgrid level. Case studies are presented that can be simulated at the transmission and distribution level in power grids, and in remote isolated microgrids where the independent system operator (ISO) has control. Increasing utilization of renewable energy sources and …

Nanoscale Spatial Realization Of Grain Boundary Defects And Its Passivation In Perovskite Solar Cells, Ashraful Haider Chowdhury

Electronic Theses and Dissertations

Perovskite solar cells (PSCs) have seen significant improvement in photovoltaic performance in recent days. However, the performance of PSCs is limited by the defects present at grain boundaries (GB). The study adapted here discusses the nanoscale spatial realization of grain boundary defects and its passivation in perovskite solar cells. Conventional MAPbI3 and state- of-the-art Cs5(MA0.17FA0.83)95Pb(I0.83Br0.17)3-FAMACs perovskite GBs were studied in detail using atomic force microscopy. The density of trap states calculation by kelvin probe force microscopy (KPFM) shows that FAMACs perovskites have lower defects at GB compared with MAPbI3 perovskites. This improvement is caused by the less activation energy of …

Additive And Interface Engineering Of Lead-Tin Mixed Low-Bandgap Perovskite Solar Cells For Higher Efficiency And Improved Stability, Nabin Ghimire

Electronic Theses and Dissertations

Lead (Pb) -Tin (Sn) mixed perovskites suffer from large open-circuit voltage (VOC) loss due to the rapid crystallization of perovskite film, creating Sn and Pb vacancies. Such vacancies act as defect sites expediting charge carrier recombination, thus hampering the charge carrier dynamics and optoelectronic properties of perovskite films. In the first project, we focused on the passivation of perovskite surface defects to increase the opencircuit voltage of the 1.25 eV low-bandgap perovskite solar cells by utilizing a trace amount of Phenethylammonium iodide (PEAI) in the perovskite precursor solution as a doping agent. The incorporation of PEAI in perovskite precursors improved …

Development Of Efficient Wide-Bandgap Perovskite Solar Cells With Composition And Interface Engineering, Khan Mamun Reza

Electronic Theses and Dissertations

Metal halide perovskites are considered the most promising solar energy technology because of their distinct properties, such as defect tolerance, low cost, easy fabrication due to solution-processibility, band tunability, etc. Due to these properties, the efficiency of perovskite solar cells reaches more than 25% and approaches the limit of singlejunction within last few years. To increase the efficiency further in a more cost-effective way, double junction tandem solar cells with an efficient ‘top’ wide-bandgap cell is desired. But wide-bandgap perovskites still face some critical issues, such as poor morphology, smaller grain size, the formation of excessive lead halides, light-induced halide …

Lithium-Ion Battery And Beyond: Oxygen Vacancy Creation In Tungsten Trioxide And Surface Modification Of Lithium Metal, Rajesh Pathak

Electronic Theses and Dissertations

The graphite-based anode material has a low theoretical specific capacity of 371 mAh g-1. The transitional metal oxides (TMOs) are considered a better choice owing to their relatively higher specific capacity. Among TMOs, tungsten trioxide (WO3) is considered promising due to a higher specific capacity of 693 mAh g-1, low cost, mechanically stable, and eco-friendly. It has been a challenge to utilize the TMOs as anode materials as they suffer from poor electronic conductivity and large electrode volume expansion during discharge/charge cycles. In our first project, we demonstrate a unique self-recovery of capacity in reduced WO3 by the incorporation of …

Optimization-Based Fast-Frequency Support In Low Inertia Power Systems, Ujjwol Tamrakar

Electronic Theses and Dissertations

The future electrical energy demand will largely be met by non-synchronous renewable energy sources (RESs) in the form of photovoltaics and wind energy. The lack of inertial response from these non-synchronous, inverter-based generation in microgrids makes the system vulnerable to large rate-of-change-of-frequency (ROCOF) and frequency excursions. This can trigger under frequency load shedding and cause cascaded outages which may ultimately lead to total blackouts. To limit the ROCOF and the frequency excursions, fast-frequency support can be provided through appropriate control of energy storage systems (ESSs). For proper deployment of such fast-frequency control strategies, accurate information regarding the inertial response of …

Tailoring The Grain Boundaries Of Wide-Bandgap Perovskite Solar Cells By Molecular Engineering, Khalid Emshadi

Electronic Theses and Dissertations

Due to the attraction of fabricating highly efficient tandem solar cells, wide-bandgap perovskite solar cells have attracted substantial interest in recent years. However, polycrystalline perovskite thin-films show the existence of trap states at grain boundaries, which diminish the optoelectronic properties of the perovskite and thus remains a challenge. This research demonstrates a one-step solution-processing of the [MA_0.9Cs_0.1Pb(I_0.6Br_0.4)3] wide-bandgap perovskite using Phenylhydrazine Iodide with amino groups to successfully passivate the trap density within grain boundaries and increase the perovskite grain size. The reinforced morphology and grain boundaries treatment considerably enhanced the photovoltaic performance …

Enhanced Charge Carrier Dynamics And Defects Passivation In Hybrid Perovskite Solar Cell Using A Novel Organic Halide Salt, Md Ashuqur Rahman Laskar

Electronic Theses and Dissertations

In the last few years, active research works on hybrid perovskite solar cells (HPSCs) have been going on throughout the world as a part of clean energy revolution. HPSCs have already proved their potentiality as future solar technology through their promising photovoltaic performances and ability for low temperature based solution processing. Nevertheless, still there are remaining challenges of better charge carrier dynamics and defects minimization in HPSCs. Overcoming these challenges are very important to achieve high power conversion efficiency (PCE) practically. Aiming this, a novel organic halide salt called Phenylhydrazinium Iodide (PHAI) is introduced as additive with CH₃NH …

Surface And Structure Engineering For Next Generation Lithium Metal Batteries, Ke Chen

Electronic Theses and Dissertations

Lithium (Li) metal has been considered as one of the most promising anode materials to replace conventional graphite for Li-ion battery due to its high theoretical capacity (3860 mAh g-1) and low electrochemical potential (-3.04 V vs standard hydrogen electrode). However, it still faces some problems such as unstable solid electrolyte interphase (SEI), uncontrolled Li dendrites growth, and infinite volume change during battery charging/discharging. To develop a stable and low-cost Li metal anode for next-generation Li metal battery, in this dissertation, we have made efforts to understand and solve these problems in two aspects, by introducing an artificial SEI and …

Computational Intelligence Approaches For Energy Optimization In Microgrids, Tamal Roy

Electronic Theses and Dissertations

The future electrical system termed as smart grid represents a significant paradigm shift for power industry. Nowadays, microgrids are becoming smarter with the integration of renewable energy resources (RESs) , diesel generators , energy storage systems (ESS), and plug-in electric vehicles (PEV or EV) . However, these integration bring with new challenges for intelligent management systems. The classical power generation approaches can no longer be applied to a microgrid with unpredictable renewable energy resources. To relive these problem, a proper power system optimization and a suitable coordination strategy are needed to balance the supply and demand. This thesis presents three …

Distributed Machine Learning Approach To Fast Frequency Response-Based Inertia Estimation In Low Inertia Grids, Abodh Poudyal

Electronic Theses and Dissertations

Recent updates to the IEEE 1547-2018 standard allow active participation of distributed energy resources (DERs) in power grid services with the goal of increased grid reliability and resiliency. With the rapid growth of DERs towards a low inertia converter-dominated grid, the DERs can provide fast frequency response (FFR) services that can quickly counteract the change in system frequency through inertial support. However, in low voltage grids, frequency and voltage face dynamics coupling due to a high resistance to reactance ratio and cannot be controlled separately as in the bulk electric grid. Due to the coupling effect, the control of one …

Machine Learning For Load Profile Data Analytics And Short-Term Load Forecasting, Md. Rashedul Haq

Electronic Theses and Dissertations

Short-term load forecasting (STLF) is a key issue for the operation and dispatch of day ahead energy market. It is a prerequisite for the economic operation of power systems and the basis of dispatching and making startup-shutdown plans, which plays a key role in the automatic control of power systems. Accurate power load forecasting not only help users choose a more appropriate electricity consumption scheme and reduces a lot of electric cost expenditure but also is conducive to optimizing the resources of power systems. This advantage helps while improving equipment utilization for reducing the production cost and improving the economic …

Energy Optimization And Coordination Frameworks For Smart Homes Considering Incentives From Discomfort And Market Analysis, Priti Paudyal

Electronic Theses and Dissertations

The electricity demand is increasing with the growing use of electricity-based appliances in today’s world. The residential sector’s electricity consumption share is also increasing. Demand response (DR) is a typical way to schedule consumers’ energy consumption and help utility to reduce the peak load demand. Residential demand management can contribute to reduce peak electric demand, decrease electricity costs, and maintain grid reliability. Though the demand management has benefits to the utility and the consumers, controlling the consumers electricity consumption provides inconvenience to the consumers. The challenge here is to properly address the customers’ inconvenience to encourage them to participate and …

Techno-Economic And Sustainability Study Of Pv Inverter Controllers In Distribution Networks For Voltage Regulation, Kapil Duwadi

Electronic Theses and Dissertations

Increasing distributed solar installations in low voltage distribution grids tend to increase the feeder voltage. The rise in voltage is only acceptable to a certain limit, and control strategies are required to keep voltage within defined bounds for equipment safety and system reliability. PV inverter control strategies are cost-effective methods to prevent overvoltage. Different inverter control strategies have different impacts on their techno-economic performance, ultimately affecting their sustainability. An evaluation framework for long-term techno-economic and sustainability analysis of overvoltage prevention methods in PV-rich LV networks is proposed to decide suitable control methods by making use of quasi-steady-state time-series (QSTS) software …