Power and Energy Commons^™

Research On Intelligent Ship Energy Efficiency Management Technology, Ranqi Ma

Maritime Safety & Environment Management Dissertations (Dalian)

No abstract provided.

Assessing The Potential For Greater Solar Development In West Texas, Usa, Dale D. Devitt, M. H. Young, J. P. Pierre

Life Sciences Faculty Research

As population and economies continue to grow on a global scale, so too does the demand for energy. To improve reliability and independence of energy supplies, the U.S. and many other countries are seeking internally-sourced renewable energy; solar is one such renewable-energy source that meets these criteria. However, all energy sources exert some environmental impacts. In the case of solar, direct impacts stem mostly from alteration of land needed to host infrastructure. Understanding the environmental upside and downside potential of solar energy systems allows a more comprehensive, side-by-side comparison with different energy sources. In this article, we focus on the …

Dual-Axis Solar Tracker, Bryan Kennedy

All Undergraduate Projects

Renewable energies, and fuels that are not fossil fuel-based, are one of the prolific topics of debate in modern society. With climate change now becoming a primary focus for scientists and innovators of today, one of the areas for the largest amount of potential and growth is that of the capturing and utilization of Solar Energy. This method involves using a mechanical system to track the progression of the sun as it traverses the sky throughout the day. A dual-axis solar tracker such as the one designed and built for this project, can follow the sun both azimuthally and in …

Computational Assessment Of Aortic Valve Function And Mechanics Under Hypertension, Saurav Kadel

Browse all Theses and Dissertations

Calcific aortic valve disease (CAVD), the most common valvular heart disorder, is associated with complications such as stroke, heart attack, aortic aneurysm, left ventricular hypertrophy, and ultimately death. While hypertension has been identified as a major risk factor for CAVD, the mechanisms by which it may promote calcification are still unknown. Given the sensitivity of valvular tissue to mechanical stress alterations, the hemodynamic abnormalities linked to hypertension may play a role in the development of CAVD. Further, the effects of hypertension on the left ventricular functionality and coronary flow resistance remain largely uninvestigated. Hence, the objectives of this thesis were …

Optimization Study Of A Combined Wind-Solar Farm For A Specified Demand, Venkat Siddhartha Rama

Browse all Theses and Dissertations

At the present time, using wind and solar energy for producing electricity in the United States is becoming cost competitive. According to Lazard’s 2019 [36] levelized cost of energy (LCOE) analysis of a number of energy sources used for producing electricity in the United States, wind and solar are cheaper than natural gas and coal. While capital, maintenance, operation, and fuel costs are included in LCOE numbers, energy source intermittency is not. Intermittency is an important issue with wind and solar energy sources, but not with natural gas or coal energy sources. Combining wind and solar energy sources into one …

Analyzing The Efficiency Of Horizontal Photovoltaic Cells In Various Climate Regions, Parker A. Hines, Torrey J. Wagner, Clay M. Koschnick, Steven J. Schuldt

Faculty Publications

This research presents the development of linear regression models to predict horizontal photovoltaic power output. We collected a dataset from 14 global Department of Defense (DoD) installations over a timeframe of one year using an experimental apparatus, resulting in 24,179 usable data points. We developed a linear model to predict power output, which incorporated site-specific weather and geographical characteristics, along with Köppen-Geiger climate classifications in order to determine the effect of adding climate to the model. After performing a Wald test between the full model and a reduced model without Köppen-Geiger climate variables, it was determined that including Köppen-Geiger climate …

H2 Control For Improved Stability Of Multi-Area Electric Power System With High Levels Of Inverter-Based Generation, Muthanna Abdulkareem Al-Sarray

Graduate Theses and Dissertations

Increased generation capacity from non-dispatchable energy resources such as wind and solar has created challenges to ensuring the reliable delivery of electric power. This research develops a systematic three-step method of assessing the reliability of electric power systems under a variety of different possible fault conditions to ensure that overall system stability is preserved in a manner the meets regulatory requirements. The first step is a risk-based reliability method (RBRM) that accounts for the probability of a line outage versus the severity of impact. This allows system planners to judiciously allocate expenses for reliability improvements based on the greatest economic …

36% Reduction In Fuel Resupply Using A Hybrid Generator & Battery System For An Austere Location, David J. Chester, Torrey J. Wagner, Douglas S. Dudis

Faculty Publications

The DOD energy policy is to increase energy security resiliency, and mitigate costs in the use and management of energy^[1] Forward operating bases (FOBs) are remote, austere base camps that support an operationally defined mission with a limited or no ability to draw from an energy grid and have historically relied on diesel-powered generators for the primary production of energy.^[2] Generators are sized to meet a theoretical peak demand, but steady state loads are far below this peak, resulting in under-loaded generators.^[3] Under-loaded diesel generators decrease efficiency and increase the need for maintenance, affecting the lifespan of …

Surface And Interface Properties In Thin-Film Solar Cells: Using Soft X-Rays And Electrons To Unravel The Electronic And Chemical Structure, Lothar Weinhardt, Dirk Hauschild, Clemens Heske

Chemistry and Biochemistry Faculty Research

Thin‐film solar cells have great potential to overtake the currently dominant silicon‐based solar cell technologies in a strongly growing market. Such thin‐film devices consist of a multilayer structure, for which charge‐carrier transport across interfaces plays a crucial role in minimizing the associated recombination losses and achieving high solar conversion efficiencies. Further development can strongly profit from a high‐level characterization that gives a local, electronic, and chemical picture of the interface properties, which allows for an insight‐driven optimization. Herein, the authors' recent progress of applying a “toolbox” of high‐level laboratory‐ and synchrotron‐based electron and soft X‐ray spectroscopies to characterize the chemical …

Transmission Electron Microscopy Analysis Of Silicon-Doped Beta-Gallium Oxide Films Grown By Pulsed Laser Deposition, Cynthia Thomason Bowers

Browse all Theses and Dissertations

Due to the large band gap of β-Ga2O3 and recent improvements toward high quality native substrates and the ability to shallow dope epitaxial β-Ga2O3 it is an attractive material for applications in power electronic devices. Such devices require advances in the areas of thin film growth and carrier concentration control to deliver high mobility films appropriate for the device structures. Transmission electron microscopy (TEM) analysis can provide information concerning doping, crystal structure, and internal strain which will be valuable to assess the role of defects and impurities on the transport properties for feedback to optimize the bulk and epitaxial growth …

What Can I Do As A Student To Make A Positive Impact On The Environment?, Tammy Guthrie, Greg Herzig, Kathy Prophet, Cassie Kautzer

Middle School Lesson Plans

Students discover ways they can make a positive impact on the environment.

Lithium And The Foreseeable Future, Paolo Vargas

Mechanical Engineering Undergraduate Honors Theses

This paper aims to clarify the uncertainties regarding worldwide lithium resource availability in the years to come. Previous studies made on the subject are presented with some ambiguity and this work intends to fill the gaps. The information and data presented throughout this script with respect to global lithium resources and reserves are mostly based on data released by the United States Geological Survey (USGS). Lithium resource availability in the future is a point of paramount significance primarily for the automotive, portable electronics, and the power generation industry. Since, a change of supply would ultimately affect the price of lithium, …

Automated Cfd Optimization To Maximize Wind Farms Performance And Land Use, Rafael Valotta Rodrigues

Electronic Theses and Dissertations

In this research, a computational system was designed to analyze and optimize the layout of wind farms under variable operational conditions. At first, a wind turbine computational fluid dynamic (CFD) model was developed covering the near wake. The near wake flow field was validated against near wake velocity data from the MEXICO experiment. The CFD simulation demonstrated that the tip speed ratio and the pitch angle greatly influence the near wake behavior, affecting the velocity deficit and the turbulence intensity profile in this region. The CFD model was extended to cover the far wake, aiming to become a computational tool …

Wetting Properties Of Structured Interfaces Composed Of Surface-Attached Spherical Nanoparticles, Bishal Bhattarai

Browse all Theses and Dissertations

In this thesis, the effects of the external pressure and surface energy on stability and wetting transition at nanotextured interfaces are studied using molecular dynamics and continuum simulations. The surface roughness of the composite interface is modeled via an array of spherical nanoparticles with controlled wettability. It was found that in the absence of external pressure, the liquid interface is flat and its location relative to the solid substrate is determined by the radius of the particle and the local contact angle. With increasing pressure on the liquid film, its interface becomes more curved and the three-phase contact line is …

Research Of Sustainable Jet Fuel Production Using Microbes, Rajee Olaganathan

Publications

Global climate change, coupled with rapidly increasing oil prices and energy demand around the world, has paved a way for intense research in the biofuel sector. Stakeholders in the aviation industry have started to focus on bio-jet fuel. Bio-jet fuel is regarded as a sustainable solution to greenhouse gas emissions and energy demand. This paper provides a brief review of the biofuel production technologies, the role of bacteria in producing hydrocarbons and the recent advancements in microbial engineering to enhance the biofuel production. Finally, this paper concludes by highlighting the challenges and future research implications in bio-jet fuel production.

2017 Fall Engr333 Project Final Report (Section A), Trevor Nyeholt, Francis Kapesa, Justin Thalmayer, Erik Karlson, Kyle Van Veen, Kirk Brink, Steven Tarske, Brent Homan, Nathan De Haan, Paul Bootsma, Megan Anders, Philip Holmes, Melanie Fox, Noah Pirrotta, Abigail Berkompas, Ben Wellman, Halley Press, Christopher Greaves, Josh Templeman, Tim Bosch, Jake Zandstra, Hendrik Vermeulen

ENGR 333

Calvin College currently spends $836,000 annually on natural gas consumption. The engineering 333-A class was tasked with the question, "What would it take for Calvin College to save $75,000 per year on natural gas costs". The class was split into five groups (Boilers, Dorms and Dining Hall, Academic Buildings, Finance, and PE Complex) to research possible areas of savings. Through the class' research, it was determined that Calvin College has the potential savings of $87,000 a year through the reduction of natural gas usage.

2017 Fall Engr333 Project Final Report (Section B), Eric Ball, Mitchell Debruin, Raymond Kolocek, Edwin Kpodzro, Jacob Vandekieft, Nate Anderson, Brennan Steenhoek, Darbi Meyer, Derek Vermerris, Jessica Bouma, Devon Loerop, Reuben Saarloos, Richmond Amoh, Matthew Boelens, Tyson Butler, Laura Van Winkle, Alex Keizer, Kwame Ohemeng, Cameron Richman, Julie Van De Riet

ENGR 333

Currently, Calvin College spends $2.8M on electricity and natural gas. In the recent past Calvin has alleviated some of these costs by running a cogeneration system that combusts fuel and produces electricity and heat, this old system has since been removed due to age. With the old system removed Calvin is fully reliant on grid, leading to increased electricity cost. In addition to saving Calvin money, President Leroy formally signed the President’s Carbon Commitment that announced Calvin’s intent to be Carbon neutral by 2057. To meet both the cost and emissions saving needs, the objective of the energy savings project …

2017 Fall Engr333 Seminar Preservation, Trevor Nyeholt, Erik Karlson, Cam Richman, Tyson Butler

ENGR 333

File for student presentation, given by students in the Fall 2017 class of ENGR333.

2017 Fall Engr333 Poster (Section B), Eric Ball, Mitchell Debruin, Raymond Kolocek, Edwin Kpodzro, Jacob Vandekieft, Nate Anderson, Brennan Steenhoek, Darbi Meyer, Derek Vermerris, Jessica Bouma, Devon Loerop, Reuben Saarloos, Richard Amoh, Matthew Boelens, Tyson Butler, Laura Van Winkle, Alex Keizer, Kwame Ohemeng, Cameron Richman, Julie Van De Riet

ENGR 333

Previously, Calvin College had a cogeneration system with the purpose of generating electricity and heat, through the combustion of natural gas, for Calvin’s campus. The original co-gen system was removed in 2017 due to high costs associated with maintenance and operations. Without a co-gen system, Calvin College is fully dependent on the grid. To save money and help in the President’s Carbon Commitment, PCC, the mechanical engineering students of ENGR 333 (section B) propose the implementation of a new co-gen system.

2017 Fall Engr333 Poster (Section A), Trevor Nyeholt, Francis Kapesa, Justin Thalmayer, Erik Karlson, Kyle Van Veen, Kirk Brink, Steven Tarske, Brent Homan, Nathan De Haan, Paul Bootsma, Megan Anders, Philip Holmes, Melanie Fox, Noah Pirrotta, Abigail Berkompas, Ben Wellman, Halley Press, Christopher Greaves, Josh Templeman, Tim Bosch, Jake Zandstra, Hendrik Vermeulen

ENGR 333

Calvin College uses 161,000 MMBTU of natural gas per year, which correlates to $836,000 of annual expenses. However Calvin could save as much as $240,000 on natural gas if they were as efficient as the top performer in an energy audit of similar colleges and universities in the Midwest, conducted by Sightlines Institute. The goal of this project was to see what actions could be taken to save the college $75,000 in annual natural gas costs.

2017 Fall Engr333 Project Assignment, Matthew K. Heun

ENGR 333

The Fall 2017 ENGR333 project focused on campus energy cost savings.

I asked the students two questions:

• Section A: What would it take for Calvin to save $75k/year on natural gas costs?
• Section B: What would it take for Calvin to save $150k/year on energy costs (mostly electricity) using a new on-site co-gen plant?

Customer

The customer for this project was Phil Beezhold, Director of Calvin’s Physical Plant.

Solvent Degradation And Emissions From A 0.7mwe Pilot Co2 Capture System With Two-Stage Stripping, Jesse Thompson, Heather Nikolic, Megan Combs, Saloni Bhatnagar, Jonathan Pelgen, Keemia Abad, Kunlei Liu

Center for Applied Energy Research Faculty and Staff Publications

The UKy-CAER team successfully tested an advanced 0.7 MWe post-combustion CO₂ capture system on a coal-fired power plant using a heat integration process combined with two-stage stripping to enhance the CO₂ absorber performance. One of the unique feature of the UKy-CAER integrated process is a two-stage stripping unit for solvent regeneration. The secondary stripper is empowered by the heat rejection from a conventional steam-heated (primary) stripper. The secondary stripper outlet stream at the commercial scale can be used as boiler secondary combustion air, consequently enriching the flue gas with CO₂, resulting in less energy penalty required …

Computational Modeling Of A Williams Cross Flow Turbine, Sajjan Pokhrel

Browse all Theses and Dissertations

Hydropower is not only the most used renewable energy source in the United States, but in the world. While it is well known that large hydropower facilities, like the Hoover Dam, provide large amounts of electrical power, there is also a tremendous opportunity for hydroelectric power generation from small scale facilities that has largely been overlooked. The work being presented here studies a new cross flow turbine called the Williams Cross Flow Turbine (WCFT), which was designed to extract electric energy from low head, run-of-the-river, small hydropower sites. To spur the implementation of the WCFT in small hydropower applications, and …

Development Of Computer Program For Wind Resource Assessment, Rotor Design And Rotor Performance, Valentina Jami

Browse all Theses and Dissertations

People understand and have seen that renewable energy has many advantages over conventional energy sources. Because of these advantages, more and more emphasis has been given to generating electrical energy with renewable sources. Among the many renewable and conventional ways currently available for a society to generate electrical power, wind turbines are one of the cheapest ways of doing this. The main objective of this thesis work is to develop a computer program that assesses the wind resource at a given location, designs a wind turbine rotor for optimum power capture for one wind speed, and analyzes the performance of …

Ab Initio Study Of The Effects Of Humidity On Perovskite Based Hybrid Solar Cell Interfaces, Shantanu Rajendra Rachalwar

Browse all Theses and Dissertations

Despite the impressive success of perovskite-based hybrid solar cells, their widespread usage has been limited partially owing to stability issues under working environmental conditions. Among these, the effects of humidity are some of the most significant. Water intercalation generally degrades the material, shortens its useful life, and reduces the efficiency of photovoltaic energy conversion. Understanding the reasons for these effects can be achieved through detailed and accurate atomic-scale analysis. Here, we study water intercalation at the interfaces of perovskite-based hybrid solar cell material and TiO2 electrode. Accurate ab initio computer simulations are used to obtain structural and electronic properties. We …

Structure Stability And Optical Response Of Lead Halide Hybrid Perovskite Photovoltaic Materials: A First-Principles Simulation Study, Siddharth Narendrakumar Rathod

Browse all Theses and Dissertations

A third-generation of solar cell is based on organic-inorganic hybrid perovskite materials. These have reached up to 22.1% conversion efficiency through exponential growth just within the last decade, compared to much longer improvement times for other photovoltaic technologies. Lead halide perovskites are among the most commonly used materials in this context. Despite the relatively large number of available works on some of these materials, in particular CH3NH3PbI3, others are less investigated. Here, we focused on CH3NH3PbCl3, CH3NH3PbBr3 and CH3NH3PbI3 for assessing structure stability and optical response. Using quantum-mechanics-based first principles approaches, we calculated the optimized structures of these three materials …

Mathematical Modeling Of A P-N Junction Solar Cell Using The Transport Equations, Surjeet Singh

Browse all Theses and Dissertations

While analytical models are limited in the situations that they can simulate, they are generally easier to implement than numerical models and provide a rapid view of the variables which affect a certain quantity. Analytical models are also very useful in educational situations; such as a graduate class on photovoltaics. The modeling of the interior workings of a solar cell can be complex and involved; and some of the equations can become quite lengthy. A focus of this thesis work is the derivation of the minority carrier density and minority current density equations for a p-n junction solar cell. The …

Configuration And Electronic Properties Of The Interface Between Lead Iodide Hybrid Perovskite And Self-Assembled Monolayers In Solar Cells, Parin Divya Amlani

Browse all Theses and Dissertations

Hybrid perovskite photovoltaic materials are currently the most promising functional materials for solar cell applications with efficiency reaching to those of more conventional materials such as silicon. Using self-assembled monolayers between photovoltaic materials and electrodes is a method for improving the stability and functionality. Recent experiments have shown that using 4-mercaptobenzoic acid and pentafluorobenzenethiol monolayers bridging lead iodide hybrid perovskite photovoltaic materials and electrodes result in improved stability and efficiency. The details of monolayer assembly, molecular adsorption configuration, and resulting modification of electronic properties are important characteristics related to solar cell performance. These characteristics can be obtained through accurate computer …

Development Of Analytical Equations For Optimum Tilt Of Two-Axis And Single-Axis Rotating Solar Panels For Clear-Atmosphere Condition, Gaurav Subhash Gugale

Browse all Theses and Dissertations

Solar Energy is a renewable energy source which is used widely in recent times. Photovoltaic panels collect the sun’s energy and convert it to electricity. Photovoltaic panels are being widely used in both domestic applications, commercial applications, and small-scale power generation applications. Photovoltaic panels are easy to install, they generate most of their power when electrical demands peak, prices of photovoltaic panels are dropping rapidly, photovoltaic panels require low maintenance, their operating costs are minimal, and they are highly suitable for remote applications. The amount of electricity produced by photovoltaic panels depends on the amount of sunlight the panel captures. …

Thermoelectric Transport And Energy Conversion Using Novel 2d Materials, Luke J. Wirth

Browse all Theses and Dissertations

Nanomaterials hold great promise for applications in thermal management and thermoelectric power generation. Defects in these are important as they are generally inevitably introduced during fabrication or intentionally engineered to control the properties of the nanomaterials. Here, we investigate how phonon-contributed thermal conductance in narrow graphene, boron nitride (BN), and silicene nanoribbons (NRs), responds to the presence of a vacancy defect and the corresponding geometric distortion, from first principles using the non-equilibrium Green's function method. Analyses are made of the geometries, phonon conductance coefficients, and local densities of states (LDOS) of pristine and defected nanoribbons. It is found that hydrogen …