Power and Energy Commons^™

Power Amplifier Based On Composite Injection-Voltaic Transistors, Nodira Batirdjanovna Alimova

Chemical Technology, Control and Management

The problem of high-current radio engineering devices is related to the fact that the use of high-power transistors and other semiconductor devices is limited by such a phenomenon as a secondary breakdown, in which there is a sharp decrease in the voltage on the device with simultaneous internal current lacing, and the device fails. To solve the problem of secondary breakdown, schemes have been proposed that operate stably at reverse voltage values 4-5 times higher than usual and at power dissipation 2-3 times higher than the maximum allowable power for an individual device. The problem is proposed to be solved …

Chatgpt As Metamorphosis Designer For The Future Of Artificial Intelligence (Ai): A Conceptual Investigation, Amarjit Kumar Singh (Library Assistant), Dr. Pankaj Mathur (Deputy Librarian)

Library Philosophy and Practice (e-journal)

Abstract

Purpose: The purpose of this research paper is to explore ChatGPT’s potential as an innovative designer tool for the future development of artificial intelligence. Specifically, this conceptual investigation aims to analyze ChatGPT’s capabilities as a tool for designing and developing near about human intelligent systems for futuristic used and developed in the field of Artificial Intelligence (AI). Also with the helps of this paper, researchers are analyzed the strengths and weaknesses of ChatGPT as a tool, and identify possible areas for improvement in its development and implementation. This investigation focused on the various features and functions of ChatGPT that …

Optimising Electric Vehicle Charging Infrastructure In Dublin Using Geecharge, Alexander Mutua Mutiso, Ruairí De Fréin, Ali Malik, Eliel Kibanza, Marco Sahbane, Maxime Pantel

Conference papers

Range anxiety poses a hurdle to the adoption of Electric Vehicles (EVs), as drivers worry about running out of charge without timely access to a Charging Point (CP). We present novel methods for optimising the distribution of CPs, namely, EV portacharge and GEECharge. These solutions distribute CPs in Dublin, in this paper, by considering the population density and Points Of Interest (POIs) or road traffic. The object of this paper is to (1) develop and evaluate methods to distribute CPs in Dublin city; (2) optimise CP allocation; (3) visualise paths in the graph network to show the most used roads …

Smart Power Outlet, Kyrolos Melek, Joseph M. Garro, Ethan G. Frese, Madison Britton

Williams Honors College, Honors Research Projects

With an ever-increasing demand on the electrical grid and an increase in electrical consumer goods per household, effective power management and monitoring for home users is a must. The objective of this project is to create a consumer outlet and companion phone application. The power outlet will measure power draw on each socket and report these measurements via an embedded system, wirelessly, to the application. The application will then allow for setting custom power draws at which an individual socket will switch off if exceeded and will display how much a given outlet or individual socket is costing per unit …

Application Of Conventional Feedforward And Deep Neural Networks To Power Distribution System State Estimation And State Forecasting, James Paul Carmichael

Theses and Dissertations--Electrical and Computer Engineering

Classical neural networks such as feedforward multilayer perceptron models (MLPs) are well established as universal approximators and as such, show promise in applications such as static state estimation in power transmission systems. This research investigates the application of conventional neural networks (MLPs) and deep learning based models such as convolutional neural networks (CNNs) and long short-term memory networks (LSTMs) to mitigate challenges in power distribution system state estimation and forecasting based upon conventional analytic methods. The ability of MLPs to perform regression to perform power system state estimation will be investigated. MLPs are considered based upon their promise to learn …

Enhancing Traffic Safety In Unpredicted Environments With Integration Of Adas Features With Sensor Fusion In Intelligent Electric Vehicle Platform With Implementation Of Environmental Mapping Technology, David S. Obando Ortegon

College of Graduate Studies: Theses & Dissertations

A major objective on society is to reduce the number of accidents and fatalities on the road for drivers, and pedestrians. Therefore, the automotive engineering field is working on this problem through the development and integration of safety technologies such as advanced driving assistance systems. For this reason, this work was intended to develop and evaluate the performance of different ADAS features and IV technologies under unexpected scenarios. This by the development of safety algorithms applied to the intelligent electric vehicle designed and built in this work, through the use of ADAS sensors based on sensor fusion. Evaluation of AEB, …

Survey Of Routing Techniques-Based Optimization Of Energy Consumption In Sd-Dcn, Mohammed Nsaif, Gergely Kovásznai, Ali Malik, Ruairí De Fréin

Articles

The increasing power consumption of Data Center Networks (DCN) is becoming a major concern for network operators. The object of this paper is to provide a survey of state-of-the-art methods for reducing energy consumption via (1) enhanced scheduling and (2) enhanced aggregation of traffic flows using Software-Defined Networks (SDN), focusing on the advantages and disadvantages of these approaches. We tackle a gap in the literature for a review of SDN-based energy saving techniques and discuss the limitations of multi-controller solutions in terms of constraints on their performance. The main finding of this survey paper is that the two classes of …

Material Characterization And Comparison Of Sol-Gel Deposited And Rf Magnetron Deposited Lead Zirconate Titanate Thin Films, Katherine Lynne Miles

Mechanical Engineering ETDs

Lead zirconate titanate (PZT) has been a material of interest for sensor, actuator, and transducer applications in microelectromechanical systems (MEMS). This is due to their favorable piezoelectric, pyroelectric and ferroelectric properties. While various methods are available to deposit PZT thin films, radio frequency (RF) magnetron sputtering was selected to provide high quality PZT films with the added capability of batch processing. These sputter deposited PZT films were characterized to determine their internal film stress, Young’s modulus, composition, and structure. After characterization, the sputtered PZT samples were poled using corona poling and direct poling methods. As a means of comparison, commercially …

Agglomerative Hierarchical Clustering With Dynamic Time Warping For Household Load Curve Clustering, Fadi Almahamid, Katarina Grolinger

Electrical and Computer Engineering Publications

Energy companies often implement various demand response (DR) programs to better match electricity demand and supply by offering the consumers incentives to reduce their demand during critical periods. Classifying clients according to their consumption patterns enables targeting specific groups of consumers for DR. Traditional clustering algorithms use standard distance measurement to find the distance between two points. The results produced by clustering algorithms such as K-means, K-medoids, and Gaussian Mixture Models depend on the clustering parameters or initial clusters. In contrast, our methodology uses a shape-based approach that combines Agglomerative Hierarchical Clustering (AHC) with Dynamic Time Warping (DTW) to classify …

Developing A Miniature Smart Boat For Marine Research, Michael Isaac Eirinberg

Computer Engineering

This project examines the development of a smart boat which could serve as a possible marine research apparatus. The smart boat consists of a miniature vessel containing a low-cost microcontroller to live stream a camera feed, GPS telemetry, and compass data through its own WiFi access point. The smart boat also has the potential for autonomous navigation. My project captivated the interest of several members of California Polytechnic State University, San Luis Obispo’s (Cal Poly SLO) Marine Science Department faculty, who proposed a variety of fascinating and valuable smart boat applications.

Total Sky Imager Project, Ryan D. Maier, Benjamin Jack Forest, Kyle X. Mcgrath

Mechanical Engineering

Solar farms like the Gold Tree Solar Farm at Cal Poly San Luis Obispo have difficulty delivering a consistent level of power output. Cloudy days can trigger a significant drop in the utility of a farm’s solar panels, and an unexpected loss of power from the farm could potentially unbalance the electrical grid. Being able to predict these power output drops in advance could provide valuable time to prepare a grid and keep it stable. Furthermore, with modern data analysis methods such as machine learning, these predictions are becoming more and more accurate – given a sufficient data set. The …

An Efficient Ar Model-Based Method For The Detection Of Forced Oscillations In Power Networks: Implementation And Analysis, Maria Waleska Suarez

Graduate Theses, Dissertations, and Problem Reports (ETD)

An active research topic is the detection of various oscillations that may lead to instability and potential disruption in the operation of a power network. Forced Oscillations (FOs) play a unique role in power system stability among various oscillations. They are perturbances that change the system’s state and are caused for many reasons, including but not limited to persistent load changes and oscillatory load or generation, fault, triplane, and other mechanical anomalies. These factors can hugely affect the power grid by either increasing or decreasing the amplitude, causing corrupt modes leading to blackouts, affecting the equipment involved, delivering poor power …

Spectrum Sensing With Energy Detection In Multiple Alternating Time Slots, Călin Vlădeanu, Alexandru Marţian, Dimitrie C. Popescu

Electrical & Computer Engineering Faculty Publications

Energy detection (ED) represents a low complexity approach used by secondary users (SU) to sense spectrum occupancy by primary users (PU) in cognitive radio (CR) systems. In this paper, we present a new algorithm that senses the spectrum occupancy by performing ED in K consecutive sensing time slots starting from the current slot and continuing by alternating before and after the current slot. We consider a PU traffic model specified in terms of an average duty cycle value, and derive analytical expressions for the false alarm probability (FAP) and correct detection probability (CDP) for any value of K . Our …

Enhanced Security Utilizing Side Channel Data Analysis, Michael Taylor

Computer Science and Engineering Theses and Dissertations

The physical state of a system is affected by the activities and processes in which it is tasked with carrying out. In the past there have been many instances where such physical changes have been exploited by bad actors in order to gain insight into the operational state and even the data being held on a system. This method of side channel exploitation is very often effective due to the relative difficulty of obfuscating activity on a physical level. However, in order to take advantage of side channel data streams one must have a detailed working knowledge of how a …

Smart E-Bike Conversion Kit And Helmet, Megan West, Marena Trujillo, Hossein Asghari

Honors Thesis

With many state governments across the United States implementing shutdowns to prevent the spread of COVID-19, many bike retailers have seen dramatic increases in bike sales. Electric bicycles (e-bikes) have become increasingly popular as the public searches for alternatives to public transportation. Unfortunately, e-bike users assume some risk by riding bikes that are faster than conventional bicycles. While kits to convert conventional bicycles to e-bikes exist, no “smart” e-bike/helmet kit specifically designed to keep the user safe is currently available on the market. To mitigate risks, a smart e-bike conversion kit with multiple novel safety features, including auditory and visual …

Data Forgery Detection In Automatic Generation Control: Exploration Of Automated Parameter Generation And Low-Rate Attacks, Yatish R. Dubasi

Computer Science and Computer Engineering Undergraduate Honors Theses

Automatic Generation Control (AGC) is a key control system utilized in electric power systems. AGC uses frequency and tie-line power flow measurements to determine the Area Control Error (ACE). ACE is then used by the AGC to adjust power generation and maintain an acceptable power system frequency. Attackers might inject false frequency and/or tie-line power flow measurements to mislead AGC into falsely adjusting power generation, which can harm power system operations. Various data forgery detection models are studied in this thesis. First, to make the use of predictive detection models easier for users, we propose a method for automated generation …

Light Loaded Automated Guided Vehicle, Marcus Radtka, Nazar Paramashchuk, Lawrence Shevock

Williams Honors College, Honors Research Projects

The objective of the locomotion system was to design and implement the mechanical, electrical, and software related functions to ensure the LLAGV had the capability of maneuvering its surroundings. The LLAGV’s motors were represented in an open loop transfer function to utilize RPM feedback and a compensator when needed. The modeled compensator helped control the LLAGV’s speed and acceleration, enabling further control of the LLAGV. The internal circuitry has the means to properly distributed power to all components and allowed the user to control the LLAGV to their desire. The application software within the LLAGV locomotion system (LLAGV-LS) had consideration …

Energy Considerations In Blockchain-Enabled Applications, Cesar Enrique Castellon Escobar

UNF Graduate Theses and Dissertations

Blockchain-powered smart systems deployed in different industrial applications promise operational efficiencies and improved yields, while mitigating significant cybersecurity risks pertaining to the main application. Associated tradeoffs between availability and security arise at implementation, however, triggered by the additional resources (e.g., memory, computation) required by each blockchain-enabled host. This thesis applies an energy-reducing algorithmic engineering technique for Merkle Tree root and Proof of Work calculations, two principal elements of blockchain computations, as a means to preserve the promised security benefits but with less compromise to system availability. Using pyRAPL, a python library to measure computational energy, we experiment with both the …

Learning Deep Architectures For Power Systems Operation And Analysis, Mahdi Khodayar

Electrical Engineering Theses and Dissertations

With the rapid increase in size and computational complexities of power systems, the need for powerful computational models to capture strong patterns from energy datasets is emerged. In this thesis, we provide a comprehensive review on recent advances in deep neural architectures that lead to significant improvements in classification and regression problems in the area of power engineering. Furthermore, we introduce our novel deep learning methodologies proposed for a large variety of applications in this area. First, we present the interval deep probabilistic modeling for wind speed forecasting. Incorporating the Rough Set Theory into deep neural networks, we create an …

Machine Learning Applications In Power Systems, Xinan Wang

Electrical Engineering Theses and Dissertations

Machine learning (ML) applications have seen tremendous adoption in power system research and applications. For instance, supervised/unsupervised learning-based load forecasting and fault detection are classic ML topics that have been well studied. Recently, reinforcement learning-based voltage control, distribution analysis, etc., are also gaining popularity. Compared to conventional mathematical methods, ML methods have the following advantages: (i). better robustness against different system configurations due to its data-driven nature; (ii). better adaption to system uncertainties; (iii). less dependent on the modeling accuracy and validity of assumptions. However, due to the unique physics of the power grid, many problems cannot be directly solved …

Optimal Network Reconfiguration And Distributed Generation Sizing With Consideration Of Protection System, Abdul Rahim Mohamad Norshahrani

Student Works (2020-2029)

Research on network reconfiguration (NR) considering distributed generation (DG) commonly focus on the issues of power loss, voltage deviation, DG sizing and its placement. These works are important and required in the planning stage of the distribution networks. In most of the past works, the protection system is neglected in this stage although it is essential to prevent the network from damages during operation. Without proper consideration of protection system settings and coordination during NR, the protection system may operate inaccurately. This happens due to changes in current flow and fault level when the network changes its configuration. As a …

Lawn Buddy, Jayson Johnston, Andrew Brown, Jacob Maljian

Electrical Engineering

Grass lawns are a common hallmark of the American home. In 2019, a survey from the National Association of Landscape Professionals found that 81% of all Americans owned a lawn [1]. Mowing is a time consuming and costly chore that is part of maintaining a grass lawn. The manual labor in mowing a lawn can exceed 40 hours per year [2]. People commonly incur weekly costs on mowing services to save time. Traditional gas powered mowers are physically demanding and use engines that need routine maintenance. They operate loudly enough that users should be wearing hearing protection and the noise …

On-Site And External Energy Harvesting In Underground Wireless, Usman Raza, Abdul Salam

Faculty Publications

Energy efficiency is vital for uninterrupted long-term operation of wireless underground communication nodes in the field of decision agriculture. In this paper, energy harvesting and wireless power transfer techniques are discussed with applications in underground wireless communications (UWC). Various external wireless power transfer techniques are explored. Moreover, key energy harvesting technologies are presented that utilize available energy sources in the field such as vibration, solar, and wind. In this regard, the Electromagnetic(EM)- and Magnetic Induction(MI)-based approaches are explained. Furthermore, the vibration-based energy harvesting models are reviewed as well. These energy harvesting approaches lead to design of an efficient wireless underground …

Short-Term Electricity Price Forecasting In Deregulated Electricity Market Based On Enhanced Artificial Intelligence Techniques, Pourdaryaei Alireza

Student Works (2020-2029)

Electricity price forecasting is considered as one of prime factors for operation, planning and scheduling of price-setter market participants. However, possessing time variant, non-linear and non-stationary behaviors make the electricity price a complex signal. The main challenge in this area is providing highly accurate and efficient day-ahead price forecasting. A suitable feature selection technique, which is able to model the interacting features and nonlinearities of the forecast processes, is still required although researches have been performed for day-ahead forecasting. In this research, a hybrid electricity price forecasting methodology is proposed using two-stage feature selection method and optimization using adaptive neuro-fuzzy …

Dual-Axis Solar Tracker, Bryan Kennedy

All Undergraduate Projects

Renewable energies, and fuels that are not fossil fuel-based, are one of the prolific topics of debate in modern society. With climate change now becoming a primary focus for scientists and innovators of today, one of the areas for the largest amount of potential and growth is that of the capturing and utilization of Solar Energy. This method involves using a mechanical system to track the progression of the sun as it traverses the sky throughout the day. A dual-axis solar tracker such as the one designed and built for this project, can follow the sun both azimuthally and in …

Microgrid-Enabled Reactive Power Support To Enhance Grid Economics, Sarhan Hasan

Electronic Theses and Dissertations

Reactive power plays an essential role in voltage control and stability in electric power systems. Various Volt/VAR techniques are utilized in electric power systems to maintain the voltage profile within defined acceptable limits and accordingly provide reliability and stability. Reactive power has been commonly generated through large-scale synchronous generators or distributed capacitor banks to provide proper transmission and distribution level system management, however, reactive power can be further used as an effective means to reduce total system operation cost. In this dissertation, an optimal reactive power model is proposed to determine the optimal nodal reactive powers that result in the …

Edge-Cloud Computing For Iot Data Analytics: Embedding Intelligence In The Edge With Deep Learning, Ananda Mohon M. Ghosh, Katarina Grolinger

Electrical and Computer Engineering Publications

Rapid growth in numbers of connected devices including sensors, mobile, wearable, and other Internet of Things (IoT) devices, is creating an explosion of data that are moving across the network. To carry out machine learning (ML), IoT data are typically transferred to the cloud or another centralized system for storage and processing; however, this causes latencies and increases network traffic. Edge computing has the potential to remedy those issues by moving computation closer to the network edge and data sources. On the other hand, edge computing is limited in terms of computational power and thus is not well suited for …

Vehicle Operator Attention Monitor, Matthew Krispinsky, Matt Marsek, Matthew Mayfield, Brian Call

Williams Honors College, Honors Research Projects

Motor vehicle operators’ attention levels can be monitored to improve driver safety. By recording and analyzing the drivers eye gaze, hand position, vehicle speed and engine rpm the driver’s attention can be determined. A Raspberry Pi will be the main processing unit. Data will be pulled and analyzed from the OBD-II port on vehicle speed and engine rpm. The system will be powered from a 12V, 4A pin on the OBD-II port connected to the car battery. A webcam will be used to track the pupil location and determine when the driver is looking at the road. A battery powered …

Evaluation And Analysis Of Null Convention Logic Circuits, John Davis Brady

Graduate Theses and Dissertations

Integrated circuit (IC) designers face many challenges in utilizing state-of-the-art technology nodes, such as the increased effects of process variation on timing analysis and heterogeneous multi-die architectures that span across multiple technologies while simultaneously increasing performance and decreasing power consumption. These challenges provide opportunity for utilization of asynchronous design paradigms due to their inherent flexibility and robustness.

While NULL Convention Logic (NCL) has been implemented in a variety of applications, current literature does not fully encompass the intricacies of NCL power performance across a variety of applications, technology nodes, circuit scale, and voltage scaling, thereby preventing further adoption and utilization …

The Stability Analysis For Wind Turbines With Doubly Fed Induction Generators, Baohua Dong

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

The quickly increasing, widespread use of wind generation around the world reduces carbon emissions, decreases the effects of global warming, and lowers dependence on fossil fuels. However, the growing penetration of wind power requires more effort to maintain power systems stability.

This dissertation focuses on developing a novel algorithm which dynamically optimizes the proportional-integral (PI) controllers of a doubly fed induction generator (DFIG) driven by a wind turbine to increase the transient performance based on small signal stability analysis.

Firstly, the impact of wind generation is introduced. The stability of power systems with wind generation is described, including the different …