Power and Energy Commons^™

The Greenest Solar Power? Life Cycle Assessment Of Foam-Based Flexible Floatovoltaics, Koami Soulemane Hayibo, Pierce Mayville, Joshua M. Pearce

Electrical and Computer Engineering Publications

This study presents a life cycle analysis (LCA) of a 10 MW foam-based floatovoltaics (FPV) plant installed on Lake Mead, Nevada, U.S. A material inventory of the flexible crystalline silicon (c-Si)-based module involved massing and determination of material composition of the module's encapsulation layers with ATR/FTR spectroscopy and electron microscopy. The LCA was performed using SimaPro and the results were interpreted in terms of cumulative energy demands, energy payback time, global warming potential, GHG emissions, and water footprint including negative values for reduced evaporation. A sensitivity analysis was performed on the lifetime of the modules and the foam-based racking. The …

Implementation And Usage Of Low-Cost Turbines For Power Generation In Water Networks, Luis Javier Ortiz Osornio

All Graduate Theses, Dissertations, and Other Capstone Projects

The following APP is part of an investigation and development, carried out to design, and implement a hydroelectric turbine of horizontal axis, in order to generate electrical energy in rural areas, utilizing existing infrastructure or natural waterways such as irrigation canals, piping, rivers and streams. Every industrialized country, as well as, most of the developing nations, have a stake in agriculture and thus access to the infrastructure required for irrigation purposes. Artificial irrigation canals offer advantages such as a clean continuous flow, with the possibility of flow regulation: this together with their vast availability as agricultural infrastructure constitute the main …

An Improved Earned Value Management Method Integrating Quality And Safety, Brian Briggs

LSU Doctoral Dissertations

The construction industry invests significant time and money to improve quality and safety while reducing cost and schedule impacts. The industry has a sincere desire to improve construction project management methods to improve efficiency. Historically, quality and safety underperformances result from undermanaged quality control and safety activities. The cost and schedule impacts associated with poor quality work have always had an impact on construction operations. The unprecedented challenges and uncertainties of COVID-19 highlighted the need to improve the Earned Value Management (EVM) method within construction to reflect these quality and safety activities. The central goal of this dissertation is to …

Design And Validation Of A High-Power, High Density All Silicon Carbide Three-Level Inverter, Zhongjing Wang

Graduate Theses and Dissertations

Transportation electrification is clearly the road toward the future. Compared to internal combustion engine, the electrified vehicle has less carbon-dioxide emission, less maintenance costs and less operation costs. It also offers higher efficiency and safety margin. More importantly, it relieves human’s dependence on conventional fossil energy. In the electrification progress, the revolution of electric traction drive systems is one of the most important milestone. The traction system should keep high efficiency to avoid performance reduction. Moreover, the motor drive should be designed within limited space without sacrificing output power rating. Based on the road map from US Drive Electrical and …

Enercon Station Vacuum Pump Replacement, Clint Hembree, Jared D'Amico, Connor Moore, Paul Jeffrey Fontenot, Sydnee Castello, J.J. Clements

Senior Design Project For Engineers

This details the progress of the ENERCON pump replacement project as completed by the Kennesaw State University interdisciplinary senior design group. This project is a two-semester capstone effort for the engineering program at Southern Polytechnic School of Engineering, overseen by Dr. McFall during Fall 2020 and Dr. Khalid during Spring 2021 semesters. The 2020-2021 KSU Interdisciplinary Senior Design team was tasked with completing an Engineering Change Package (ECP) for existing vacuum pumps at ENERCON Station. The mechanical, electrical, and civil students worked together, performing evaluations on existing plant systems to ensure the plant could support the new vacuum pumps. By …

A Magneto-Mechanical Piezoelectric Energy Harvester Designed To Scavenge Ac Magnetic Field From Thermal Power Plant With Power-Line Cables, Quan Wang, Kyung-Bum Kim, Sang-Bum Woo, Yooseob Song, Tae-Hyun Sang

Civil Engineering Faculty Publications

Piezoelectric energy harvesters have attracted much attention because they are crucial in portable industrial applications. Here, we report on a high-power device based on a magneto-mechanical piezoelectric energy harvester to scavenge the AC magnetic field from a power-line cable for industrial applications. The electrical output performance of the harvester (×4 layers) reached an output voltage of 60.8 V_max, an output power of 215 mW_max (98 mW_rms), and a power density of 94.5 mW_max/cm³ (43.5 mW_rms/cm³) at an impedance matching of 5 kΩ under a magnetic field of 80 …

Assessment Of Cu(In, Ga)Se₂ Solar Cells Degradation Due To Water Ingress Effect On The Cds Buffer Layer, Deewakar Poudel, Benjamin Belfore, Shankar Karki, Grace Rajan, Sina Soltanmohammad, Angus Rockett, Sylvain Marsillac

Electrical & Computer Engineering Faculty Publications

The effect of water ingress on the surface of the buffer layer of a Cu(In, Ga)Se2 (CIGS) solar cell was studied. Such degradation can occur either during the fabrication process, if it involves a chemical bath as is often the case for CdS, or while the modules are in the field and encapsulants degrade. To simulate the impact of this moisture ingress, devices with a structure sodalime glass/Mo/CIGS/CdS were immersed in deionized water. The thin films were then analyzed both pre and post water soaking. Dynamic secondary ion mass spectroscopy (SIMS) was performed on completed devices to analyze impurity diffusion …

Assessment Of The Performance Of Grinding Circuit For Buzwagi Gold Mine, Alphonce Wikedzi

Tanzania Journal of Engineering and Technology (TJET)

It had been reported by the management of Buzwagi Gold Mine (BGM) that grinding circuit was designed to produce final product size of 125 μm, which had not been achieved for a long period of time under both, low to normal (i.e. 450-600 t/h) and high (i.e. > 650 t/h) throughputs. Also, the performance behaviour of the circuit had not been reviewed after long time of operation. Hence, an evaluation study was conducted in order to recommend improvement in mine operations. The study was realized through three circuit survey campaigns and laboratory experimentations. From the surveys, size distributions and solids contents …

Non-Conventional Vehicles As A Way Towards Carbon Neutrality In Iceland, Julia Sokolowska

Independent Study Project (ISP) Collection

Paris Agreement’s chief objective is to protect the Earth and its inhabitants from a point of no return, when the effects of climate change will be so intense that they will shift the equilibrium of ecosystems. The distinctiveness of this international environmental treaty is that it does not impose climate change mitigation measures, but rather allows nation states to create their own set of measures, the NDCs, to reach the global warming of ‘well below 2oC’ by the end of the century. Thus, Iceland has submitted its own NDC, the Climate Action Plan 2018-2030, which has an ambitious goal of …

Design And Experiment Of A Sun-Powered Smart Building Envelope With Automatic Control, Qiliang Lin, Yanchu Zhang, Arnaud Van Mieghem, Yi-Chung Chen, Nanfang Yu, Yuan Yang, Huiming Yin

Electrical and Computer Engineering Faculty Research

A novel sun-powered smart window blind (SPSWB) system has been designed and developed for the smart control of building envelopes to achieve the optimal internal comfort with minimum energy expenditure. Its self-powered sensing, controlling, and actuation significantly simplify the installation and maintenance of the system. The energy is harvested by the attached thin-film photovoltaic cells, after which it is voltage-regulated for the permanent storage into a rechargeable battery with 55% energy efficiency. The excessive heat absorbed by the solar cells is dissipated by a PVdF-HFP porous coating with more than 9% temperature reduction. The smart control of the energy harvesting …

Photovoltaic Systems On Dairy Farms: Financial And Renewable Multi-Objective Optimization (Farmoo) Analysis, Michael Breen, J. Upton, Michael D. Murphy

Publications

No abstract provided.

Comparison Of Different Power System Resilience Assessment Methods, Jian How Sam Chan

Student Works (2020-2029)

Climate change has been given significant attention in recent times, calling for more ideas to address issues stemming from extreme weather events. Until climate change can be slowed down and ultimately be reversed, it is an imminent objective to find solutions for the mitigation and prevention of the effects of catastrophic weather events. History has a record of the devastation caused by such events on electrical power infrastructures. While electrical power systems have conventionally been designed and built to weather everyday conditions, confronting cataclysmic high-impact, low-probability events will require more resilient attributes. Power systems are often deemed as the backbone …

Neca Ghana Project, Michael T. Klee

Construction Management

Cal Poly’s motto is, “Learn by Doing" and for Cal Poly’s NECA Chapter, this isn’t simply a motto, but a directive for proactive change. For my senior project I will be leading the Cal Poly NECA chapter in the design, pre- fabrication and construction of a 5-7kw solar array, community center, ice production room and technology room in the remote fishing village of Agbokpa, Ghana. The solar array will power multiple industrial DC freezers, high efficiency LED lighting and charging stations while additionally powering water filtration and irrigation systems. Like many other fishing villages around the world, Agbokpa has no …

Analyzing Cost Effectiveness Of Photovoltaic Pavements, Ian N. Parks

Theses and Dissertations

The United States Air Force (USAF) is the largest consumer of energy within the Department of Defense (DoD). As such, the USAF is continually looking for ways to reduce consumption, as well improving network resiliency and assuring supply. One potential method for addressing these items is focusing on applications of renewable energy. A specific application of renewable energy that could greatly benefit the USAF if viable would be photovoltaic (PV) pavements. PV pavements would be able to capitalize upon the large swathes of pavements on Air Force (AF) installations, while not being hampered by other concerns such as clear zones …

Residential Thermal Storage And Cooling, Joao Marcelo Rocha Belmonte, Jacob Anderson, Andrew Clarke, Daphne Forester, Bianca Hardtke, Josh Hartman, Marc D. Compere

Sustainability Conference

No abstract provided.

Carbon-Based Interlayers In Perovskite Solar Cells, Aleksandr P. Litvin, Xiaoyu Zhang, Kevin Berwick, Anatoly V. Fedorov, Weitao Zheng, Alexander V. Baranov

Articles

Perovskites are solution-processed, high-performance semiconductors of interest in low-cost photovoltaics. The interfaces between the perovskite photoactive layers and the top and bottom contacts are crucial for efficient charge transport and minimizing trapping. Control of the collection of charge carriers at these interfaces is decisive to device performance. Here, we review recent progress in the realization of efficient perovskite solar cells using cheap, easily processed, stable, carbon-based interlayers. Interface materials including graphene, carbon nanotubes, fullerenes, graphene quantum dots and carbon dots are introduced and their influence on device performance is discussed.

The Potentials Of Faecal Sludge Treatment Using Local Conditioners In Tanzania: A Review, Doglas Benjamin1

Tanzania Journal of Engineering and Technology (TJET)

Worldwide, every day human beings generate millions of tons of Faecal Sludge (FS), which is rich in water, nutrients, energy, and organic compounds. Yet FS is not being managed in a way that permits us to derive value from its reuse, while at the same time, millions of farmers struggle with depleted soils and lack of water. In most of the developing countries, energy for cooking is mainly derived from cutting of trees, either as wood or charcoal. Resource recovery and reuse from FS can create livelihoods, enhance food security, support green economies, reduce waste and contribute to cost recovery …

2019 Fall Engr333 Project Final Report, Megan Black, Evan Block, Jacob Deysher, Zach Erickson, Peter Atma, John Macy, Paul Steenwyk, Justin Skaggs, Justin Eekhoff, Adam Marquardt, Alan Samdel, Nathan Van Wyhe, Zach Ashenfelter, Brett Ermer, Clayton Lockwood, Ryan Schierbeek, Andrew Zerull, Matthew Buist, Hannah Chilkiewicz, Nathan Hall, Holly Straup, Ivy Chipinda, Andrew Huston, Peter Oh, Tony Vander Ploeg, Josh Hallenbeck, Cameron Ilbrink, Bridget Pertzsch, Lillie Spackman, Zuber Abdella, Michael Merz, Nathan Schuten, Abigail Willson, William Benneh, Marcus Gelder, Steven Vanast, Tyler Johnson, Christopher Pappageorge, Trevor Sando

ENGR 333

Today, many institutions and individuals see energy efficiency as an important issue; reducing energy consumption is thought to decrease demand for fossil fuels and consumes energy more sustainably. However, while more efficient devices can save users both energy and money, they do not always result in less energy use as a society. This discrepancy between expected and actual energy savings is called the rebound effect. This can be a result of several factors: increased use of the device drawing more energy, manufacturers using more energy to create the new device, or money saved by the users being respent in the …

2019 Fall Engr333 Poster, Megan Black, Evan Block, Jacob Deysher, Zach Erickson, Peter Atma, John Macy, Paul Steenwyk, Justin Skaggs, Justin Eekhoff, Adam Marquardt, Alan Samdel, Nathan Van Wyhe, Zach Ashenfelter, Brett Ermer, Clayton Lockwood, Ryan Schierbeek, Andrew Zerull, Matthew Buist, Hannah Chilkiewicz, Nathan Hall, Holly Straup, Ivy Chipinda, Andrew Huston, Peter Oh, Tony Vander Ploeg, Josh Hallenbeck, Cameron Ilbrink, Bridget Pertzsch, Lillie Spackman, Zuber Abdella, Michael Merz, Nathan Schuten, Abigail Willson, William Benneh, Marcus Gelder, Steven Vanast, Tyler Johnson, Christopher Pappageorge, Trevor Sando

ENGR 333

Energy efficiency can be a worthy goal for institutions and individuals; reducing energy consumption decreases demand for fossil fuels and consumes energy more sustainably. However, more cost-effective devices can lead to behavioral changes that ultimately increase energy consumption, even though the devices themselves are more energy efficient: This called the rebound effect. Rebound occurs when less energy is saved than expected. This can be a result of several factors: increased use of the device drawing more energy, manufacturers using more energy to create the new device, or money saved by the users being re-spent in the economy. The combination of …

2019 Fall Engr333 Seminar Presentation, Ivy Chipinda, Andrew Huston, Adam Marquardt, Lillie Spackman

ENGR 333

File for student presentation, given by students in the Fall 2019 class of ENGR333.

Fractional Order State Feedback Control For Improved Lateral Stability Of Semi-Autonomous Commercial Heavy Vehicles, Rasheed Mazen Abdulkader

Graduate Theses and Dissertations

With the growing development of autonomous and semi-autonomous large commercial heavy vehicles, the lateral stability control of articulated vehicles have caught the attention of researchers recently. Active vehicle front steering (AFS) can enhance the handling performance and stability of articulated vehicles for an emergency highway maneuver scenario. However, with large vehicles such tractor-trailers, the system becomes more complex to control and there is an increased occurrence of instabilities. This research investigates a new control scheme based on fractional calculus as a technique that ensures lateral stability of articulated large heavy vehicles during evasive highway maneuvering scenarios. The control method is …

2019 Fall Engr333 Project Assignment, Matthew K. Heun

ENGR 333

The Fall 2019 ENGR333 project focused on the energy rebound effect.

I asked the students “How much energy does energy efficiency save?”

This project resulted in a working paper and two journal articles submitted to The Energy Journal. The journal articles remain under review as of October 2023.

Customer

The customer for this project was Dr. Paul E. Brockway, University of Leeds, UK.

Smart Charging Of Future Electric Vehicles Using Roadway Infrastructure, Sara Ahmed, Ethan Ahn, Mahmoud Reda Taha, Samer Dessouky, Moneeb Genedy, Daniel Fernandez, Ann Sebestian, Patience Raby

Data

Corresponding data set for Tran-SET Project No. 18ITSTSA03. Abstract of the final report is stated below for reference:

"Inspired by the fact that there is an immense amount of renewable energy sources available on the roadways such as mechanical pressure and frictional heat, this study presented the development and implementation of an innovative charging technique for future electric vehicles (EVs) by fully utilizing the existing roadways and the state-of-the-art nanotechnology and power electronics. The project introduced a novel wireless charging system, SIC (Smart Illuminative Charging), that uses LEDs powered by piezoelectric nanomaterials as the energy transmitter source and thin film …

Smart Charging Of Future Electric Vehicles Using Roadway Infrastructure, Sara Ahmed, Ethan Ahn, Mahmoud Reda Taha, Samer Dessouky, Moneeb Genedy, Daniel Fernandez, Ann Sebestian, Patience Raby

Publications

Inspired by the fact that there is an immense amount of renewable energy sources available on the roadways such as mechanical pressure and frictional heat, this study presented the development and implementation of an innovative charging technique for future electric vehicles (EVs) by fully utilizing the existing roadways and the state-of-the-art nanotechnology and power electronics. The project introduced a novel wireless charging system, SIC (Smart Illuminative Charging), that uses LEDs powered by piezoelectric nanomaterials as the energy transmitter source and thin film solar panels placed at the bottom of the EVs as the receiver, which is then poised to deliver …

Reliability Issues Caused By The Retirement Of Large Thermal Generation Facilities: An Irish Case Study, Kyle Lawson, Jane Courtney

Conference papers

Like all developed countries Ireland faces increasing pressure to reduce their carbon footprint. Part of the governments plans include the scaling back of fossil fuel generation facilities and increasing renewable resources. Moneypoint is Irelands only coal fired generation station. In 2025 Moneypoint is due to reach the end of its life cycle. At this point the Irish government will have to make a decission on the future of the generation facility. Currently Moneypoint is responsible for the generation of approximately 10 % of Irelands energy needs. In this paper, the removal of Moneypoint from the Irish generation portfolio will be …

Urban Runoff And Energy Recovery, Dimitri Porter

Research Opportunities for Engineering Undergraduates (ROEU) Program 2018-19

This project seeks to determine whether microturbines can operate with low flow and low head conditions typically found in urban runoff, and how much power microturbines can generate under these conditions.

Optimization Of Pv Powered Spd Switchable Glazing To Minimise Probability Of Loss Of Power Supply, Aritra Ghosh, Brian Norton

Articles

Suspended particle device (SPD) glazing is an electrically actuated switchable glazing. It requires alternate current (AC) power supply to switch from opaque to transparent state. To power this glazing using PV device requires inverter. Optimization of AC powered switchable SPD glazing using photovoltaic (PV) device has been evaluated using loss of power supply probability (LPSP). Electrically switchable direct current (DC) powered electrochromic glazing was also considered in this investigation as it doesn't need any inverter to couple with PV. It is concluded that behaviour of these glazings is the dominant factor in performance optimization outweighting than azimuthal orientation and inclination …

A Review Of Co2 Emission Reductions Due To Wind Turbines Using Energy Benchmarks: A Focus On The Irish Electrical Energy Market, Tony Kealy

Articles

The installed capacity of wind turbines in Ireland increased from a value of 2,250 MW in 2014 to 3,318 MW in 2017, a 43% increase in the four years, supported through climate mitigation policies. The main aim of this study is to determine if the increase in wind turbine installed capacity is impacting on efforts to reduce CO2 emissions. The study utilises a review methodology. The findings show that the steady rise in wind turbine installed capacity year-on-year is not reflected in the Irish CO2 g/kWh energy benchmark. The benchmark value was 457 g CO2/kWh in 2014 and 437 g …

2018 Fall Engr333 Project Final Report (Section A), 2018 Fall Engr333 Section A

ENGR 333

Calvin College currently spends 2.35 million dollars on energy every year. Physical Plant is under pressure to reduce the amount of energy that Calvin purchases from the electrical grid since the college is facing many budget constraints. In addition, President Le Roy signed the President’s Carbon Commitment to achieve carbon neutrality by 2057. With this need to save money on energy and reduce the college’s carbon footprint, the objective of this project was to determine the largest possible reduction in Calvin’s annual energy costs given a five-million-dollar investment in renewable energy.

2018 Fall Engr333 Project Final Report (Section B), Alexander Cooper, Katie Diekema, Grace Fasipe, Daniella Sugijanto, Alec Dejonge, Timothy Dykhuis, Breanna Kooiman, Samuel Olson, Brennan Boice, Tyler Gustman, Daniel Norton, Christopher Vanwhye, Robert Capozzoli, Jared Minderhoud, Clark Richeson, Nathan Schuyten

ENGR 333

What is the largest possible reduction in Calvin College’s annual energy costs from a $5M initial investment in renewable energy? Renewable energy systems are essential for Calvin College to reduce greenhouse gas emissions and achieve carbon neutrality to meet the Carbon Commitment that President Le Roy signed in December 2017. Also, a significant cost reduction could be a positive result of transitioning to renewable energy sources such as geothermal, wind, solar, and biomass. Four renewable energy sources were studied throughout the semester to determine a feasible renewable energy plan for Calvin with a $5M investment.