Other Electrical and Computer Engineering Commons^™

Cache-Conscious Sparse Matrix Dense Matrix Multiplication On Gpus, Haoqiang Guo

LSU Doctoral Dissertations

Over the past decade, high-performance deep learning has evolved into a critical research domain, driven by the demand for efficient models and high inference throughput. Deep learning architectures have shifted from stacked convolutional layers to transformer-based models, while pruning techniques and graph-structured data have established sparse matrix–dense matrix multiplication (SpMM) as a fundamental kernel—particularly in graph neural networks (GNNs). Modern GPUs, with their massive parallelism and high-bandwidth memory, offer immense potential for accelerating these workloads. While SpMM implementations using the compressed sparse row (CSR) format remain common to avoid conversion overhead, preprocessing-based methods have recently demonstrated superior potential. In GNN …

Ai-Optimized Resource Management In Next-Gen Wireless Networks, Fatemeh Lotfi

All Dissertations

Next-generation wireless networks must deliver highly adaptive, scalable, and intelligent connectivity to satisfy the heterogeneous demands of emerging services, including enhanced mobile broadband, massive machine-type communications, and ultra reliable low latency applications. The Open Radio Access Network (O-RAN) paradigm has emerged as a key enabler of this vision, introducing openness, virtualization, and artificial intelligence (AI)-driven control into the RAN ecosystem. O-RAN’s disaggregated architecture facilitates multi-vendor interoperability and empowers intelligent management through the RAN Intelligent Controller (RIC). However, achieving real-time, autonomous, and generalized optimization in such a dynamic environment remains a significant challenge due to its distributed nature, non-stationary traffic, and …

Series Resonant Converters With Medium Voltage Sic Mosfets For Electric Aircraft Applications, Xinyuan Du

Graduate Theses and Dissertations

To develop high-performance high- power-density MV power converters, the emerging silicon carbide (SiC) devices are more attractive than their silicon (Si) counterparts, since the fast switch frequency brought by the SiC can effectively reduce the volume and weight of the filter components and thus increase the converter power density. From the converter topology perspective, with the MV dc distribution, the single stage isolated dc/dc converter are suitable for next-generation electric aircraft system due to soft switching and high power density. In this work, comprehensive static and dynamic characterizations were conducted for the latest 6.5 kV silicon carbide (SiC) MOSFETs from …

Design And Testing Of A Gallium Nitride Power Amplifier For High-Temperature Radar Applications, Walker Landry Harbison

Graduate Theses and Dissertations

This thesis offers the design, fabrication, and evaluation of a gallium nitride (GaN) power amplifier integrated circuit (IC) intended for high-temperature radar applications. Radar systems are used in many different applications, such as defense, aerospace, and weather. For their function, these systems require high power, efficiency, and reliability under a wide range of operating conditions. Taking advantage of the material properties of GaN, including its high breakdown voltage, wide bandgap, and thermal conductivity bolstered by the use of silicon carbide in the substrate, this work focuses on examining amplifier performance in both ambient and elevated temperature conditions. The PA was …

Parentcoach: Designing An Mhealth Parenting App To Enhance Parental Involvement In Adhd Support, Franceli L. Cibrian, Nancy Herrera, Jesus A. Beltran, Lucas M. Silva, Mikaela Pulse, Kayla Anderson, Cassie Zeiler, Luc Rieffel, Daniel I. Lee, Sabrina E. B. Schuck, Kimberley D. Lakes

Engineering Faculty Articles and Research

Introduction: Parents play a vital role in supporting self-regulation and managing behaviors in children with Attention-Deficit/Hyperactivity Disorder (ADHD). However, many face barriers to accessing consistent, evidence-based support. Mobile health (mHealth) technologies offer a promising way to deliver flexible, low-burden guidance for parents on best practices and strategies to support their children's self-regulation. However, designing them is non-trivial.

Objective: This paper introduces ParentCoach, a mobile application designed to support parents of children with ADHD through brief daily lessons, reflection prompts, and skill-building activities.

Methods: ParentCoach was developed in two phases: (1) secondary analysis of qualitative data from over 30 families …

User Interface And Watchstation Improvements Required For Multi-Vehicle Usv Operations, Val Schmidt, Joshua Bergeron

Faculty Publications

In October 2024, the University of New Hampshire and NOAA’s Uncrewed Systems Office embarked on a mapping mission in the Gulf of Maine, simultaneously operating two DriX Un-crewed Surface Vehicles. Goals of the project were focused on testing hypotheses related to concepts of operation, including the safety of operations, cognitive loading of operators, management of vehicle endurance, vehicle logistics, maintenance and field support, refueling and a host of others.

Design Considerations For Conversational Agents To Assess The Social-Emotional Well-Being Of Young Children In Low-Income South African Communities, Lucretia A. Williams, Elizabeth A. Ankrah, Catherine E. Draper, Caylee J. Cook, Franceli L. Cibrian, Jesus A. Beltran, Kimberley D. Lakes, Gillian R. Hayes

Engineering Faculty Articles and Research

A variety of digital technologies have been used to support early childhood development (ECD) programs in low-income South African communities. Even though technology has provided opportunities to increase access to health interventions, the lack of trust and socio-economic constraints under which these tools would need to work pose complex challenges. We examine home visitors’ work processes, experiences, and preferences of a conversational agent to support their work of administering social-emotional well-being assessments to young children ages 0-5. Analysis of the results of focus groups with 51 home visitors indicates the need for designing conversational agents that support ECD in the …

Ai-Powered Accessibility Tracker For Inclusive Public Spaces, Yenny Ma, Kevin Beltran

College of Engineering Summer Undergraduate Research Program

This research project will develop and evaluate a smartphone-based, AI-powered system to crowdsource and analyze accessibility features and barriers in public spaces. Using computer vision and geospatial mapping, the system will identify and categorize issues such as uneven sidewalks, missing or inadequate curb ramps, damaged tactile paving, obstructive overhangs, and the absence of visual or auditory wayfinding cues. The overarching goal is to generate a dynamic, real-time accessibility map that empowers individuals with diverse mobility, sensory, and cognitive needs to navigate public spaces more safely and confidently. The project will integrate technologies and methods from applied machine learning, mobile computer …

Developing Workflows For Passive Acoustic Detection Of Bedload Transport, Quinn Morgan

Dissertations and Theses

Bedload transport is defined as the amount of sediment, including gravel and rocks, traveling down stream. Monitoring bedload transport is important for river safety, hydrological studies and conservation efforts. Existing methods of directly measuring bedload transport (or bedload flux) involve lowering a collection device into a river and measuring the sediment collected; which can be expensive and time consuming. Hydroacoustic sensors, such as hydrophones, have had success tracking bedload flux remotely. This works by measuring the relatively high frequency of sediment impacts to map onto total bedload transported. No perfected method for detection of sediment generated noise (SGN) currently exists. …

Exopg Maturation And Owl Interface, Duncan Michael Louden

Electrical Engineering

The maturation of the ExOPG buoy generator consists of an interface to facilitate remote data acquisition of an existing battery charge controller. This module telemeters battery controller data including voltage, temperature, and state of battery charge. The data is transmitted to a communication system and is able to be viewed by humans on a 24/7 basis for continuous operation and human usage. The module works seamlessly as an addition to the existing ExOPG generator, and it does not interfere with any existing and planned components of the generator. The module is highly efficient and draws minimal power from the existing …

Multi-Modal Depth Estimation Using Camera And Mmwave Sensors, Alston D. Devero-Belfon

Student Theses

For accurately estimating the depth of environments with varying lighting conditions, reliable methods are limited. By utilizing wireless sensor technology in conjunction with cameras, a wide range of environments can be visualized, and objects within these environments can be tracked and monitored. Such methods offer cost-effective alternatives and provide a more secure, data-at-rest option for individuals with low vision, while also enhancing machine perception. In this work, we develop such a prototype that utilizes wireless sensors and cameras, which act in sync, enabling us to estimate the depth of objects within varying lighting environments to a level that is recognizable …

Restoration Of 6-Axis Industrial-Grade Robotic Arms, Bryce Andrew Paulson, Warren Douglas Howard

Electrical Engineering

The Staubli TX60 and TX60CR are industrial-grade, six-axis robotic arms originally designed to perform complex automation tasks in manufacturing environments. Following their retirement from active industrial use, both units were restored to full operational status. As part of this project, they were reprogrammed to execute a pick-and-place routine using kids shape-sorting toys that mirrors typical workflows found in factory settings. The six degrees of freedom afforded by each robot enable a wide range of motion, making them well-suited for tasks such as material handling, product sorting, and repetitive operations typically carried out by human workers. Each model is equipped with …

Accelerating Gnn Inference On Multi-Core Systems, Binglin Ji

McKelvey School of Engineering Graduate Student Theses & Dissertations

Graph Neural Networks (GNNs) are becoming increasingly popular, with their applications expanding across diverse domains. As the scale of graph data continues to grow, including larger numbers of nodes, edges, and higher embedding dimensions, standardized libraries such as DGL and PyG have been developed to facilitate GNN computation. However, with the rapid increase in the number of processor cores and the evolution of multi-core architectures, these libraries often show poor scalability and fail to execute GNN inference efficiently on the latest multi-core systems, particularly those with upwards of a hundred cores. To address this limitation, we present FGI, a Fast …

Integration And Testing Of A Quadruped Robot With Ros2, Jeremy S. West

Master's Theses

The Cal Poly Legged Robotics Group has been developing research and teaching platforms for agile legged robotics since 2020. These platforms are expected to provide students with opportunities to develop complete legged-robot systems from low-level control to advanced robotics tasks such as motion planning and decision making. However, the current prototyped quadruped robot lacked the software and sensing capabilities for high-level quadrupedal gaits and advanced robotic research.

To address these challenges, this project developed Switch, a robotic platform that builds upon the previous BRUCE platform with significant hardware and software upgrades. Switch features a modular design that allows individual software …

Self-Poled P(Vdf-Trfe) Based Composites For Energy Harvesting And Wearable Sensor Applications, Lavanya Muthusamy

All Dissertations

The growing demand for flexible, low-power, and self-powered wearable electronic systems has accelerated research interest in polymer-based sensors and energy harvesting technologies. Among piezoelectric polymer materials, Poly(vinylidene fluoride-trifluoro ethylene) [P(VDF-TrFE)], over the years, has garnered significant attention due to its unique piezoelectric properties, high dielectric constant, mechanical flexibility, thermal stability, chemical resistance, biocompatibility and compatibility with scalable fabrication processes. Despite its advantages, conventional P(VDF-TrFE)-based devices often require external poling and face limitations in integration with low-cost, flexible substrates. To overcome these limitations, this research study explores the nanofiller approach, along with facile fabrication processes, and structural design strategies aimed at …

A Generalizable And Privacy-Preserving Framework For Anomaly Detection In Heterogeneous Iot Environments, Mahshid Rezakhani

All Theses

With the rapid growth of Internet of Things (IoT) devices across various sectors, detecting anomalies in such systems has become increasingly challenging. IoT environments produce diverse and evolving data streams, often lacking labeled examples, which limits the effectiveness of traditional machine learning models. These models typically require frequent retraining and struggle to adapt to new deployment conditions. This thesis proposes a flexible, privacy-aware framework for anomaly detection in multivariate time series data generated by heterogeneous IoT systems. The approach integrates a long short-term memory variational autoencoder (LSTM-VAE) with contrastive learning and adversarial adaptation, enabling the model to generalize across domains, …

Non-Destructive Strength Monitoring Of Air-Entrained Concrete Via Electromechanical Impedance Technology, Xiangrui Kong, Rui He

Discovery Undergraduate Interdisciplinary Research Internship

Accurate monitoring of concrete strength during curing is crucial, particularly in regions subject to harsh weather conditions, such as freeze-thaw cycles in Indiana. Air entrainment is crucial for durability, yet it can significantly reduce concrete strength, making timely and precise strength assessments vital. The primary objective of this study is to develop a non-destructive and real-time monitoring framework for evaluating mortar strength using electromechanical impedance (EMI) sensors and ultrasonic scanning technology.

This research holds significant value as it addresses the critical need for continuous, reliable concrete strength monitoring, potentially reducing reliance on destructive testing methods, which are costly and time-consuming. …

Seconds From Impact: Anticipatory Vehicular Crash Prediction Using Video Vision Transormers, Ryan P. Geisen

Master's Theses

Vehicular collisions represent a significant public health concern, necessitating re search into advanced emergency notification systems. While deep learning has shown promise in accident detection, a research gap persists in applying state-of-the-art transformer architectures to the task of anticipatory, real-time crash prediction from video. This thesis addresses this gap by developing and evaluating a Video Vision Transformer (ViViT) for the binary classification of imminent vehicular collisions. Utilizing a curated dataset of 1,493 unique collision sequences, this study systemati cally investigates the impact of temporal context by comparing the ViViT against a single-frame Vision Transformer (ViT) baseline and conducting comprehensive exper …

Advancements In Refreshable Braille Display Technology: A Comprehensive Survey, Maryam Etezad, Rajeev Joshi, Franceli L. Cibrian

Engineering Faculty Articles and Research

This paper provides a comprehensive mapping literature review of the advancements in refreshable Braille display (RBD) technology, which employs dynamically movable pins or dots to render Braille characters for individuals with blindness and visual impairment. This literature review, which includes 96 papers, aims to summarize the current evidence on six distinct types of RBDs: piezoelectric, electromagnetic, electroactive polymer (EAP), pneumatic, shape memory alloy (SMA), and microfluidic technologies. For each type, we discuss the underlying mechanisms, alongside the current trends and research opportunities. This comparative analysis aims to inform the selection of appropriate RBD technology based on specific user needs and …

Tellings Of The Pacific Ocean: A Landscape-Based Approach For Multispecies Design And Hci, Maliheh Ghajargar

Engineering Faculty Articles and Research

Environmental disturbances induced by climate change have caused significant changes in our ecosystems and are threatening the health of our environments. As a response to this issue, a growing body of work has emerged in HCI and design, which seeks to foreground more-than-human stories in support of making more sustainable and just futures. This research contributes to this broad agenda by probing graphic novels as a multispecies storytelling method for design and HCI. Combining ideas from Anna Tsing’s adventures of landscape and from HCI and design’s use of sequential art (e.g., storyboards), we use landscape as the main protagonist of …

Prepare Lora Physical Layer For Testing In Low Earth Orbit On A Cubesat, Sammy Brunton

Electrical Engineering

This project is a collaboration with OWL Integrations, a company that specializes in adaptable, low-cost communication systems. OWL has developed a board specifically designed for space applications called the Space Quacker Advanced Development (SQuAD), which is an adaptation of their existing board called the Quaker Advanced Development (QUAD).

This project focuses on testing the existing SQuAD board design to make sure that it is flight-ready for deployment on Cal Poly CubeSat’s satellite, SAL-E. To achieve this, the project must ensure compatibility with Low Earth Orbit (LEO) conditions by testing the integrated high-power long-range (LoRa) receiver and enhanced hardware to meet …

Autonomous Mapping Rover, Garrett Jones, Timothy Kyle Chu, Eugenio Caruso Pasos

Electrical Engineering

This report details the design, implementation, and evaluation of "Rovero," an autonomous mapping rover developed as a senior project. Rovero integrates state-of-the-art technologies, including ROS2 for communication, SLAM algorithms for mapping, and sensor fusion for accurate navigation. The project aimed to achieve robust autonomous operation in indoor environments, leveraging a combination of LiDAR, IMU, and encoder data for real-time decision-making. Key challenges addressed include path planning, obstacle avoidance, and integration of multiple sensor inputs. Results demonstrate successful mapping capabilities and efficient navigation performance.

Field Deployable Mobile Manipulator For Autonomous Apple Harvesting, Gabriel K. Basus, Antonio Bowen, Andrew Daouda

Electrical Engineering

Increasing labor costs and agricultural demands have created a need for automated apple harvesting. However, automated apple harvesting via robotic manipulation must overcome certain challenges to be an effective and efficient method. First, the system must compete with or perform better than manual human labor. Second, it must safely and accurately navigate an apple orchard autonomously. Third, the robotic manipulator must be able to securely grasp and pick apples without causing damage. To address these challenges, this project utilizes a Husky UGV equipped with a 2D LiDAR sensor, an RGB-D camera, an IMU, an OpenManipulator-X robot arm, and a soft …

Optical Character Recognition For Early Handwriting Legibility Assessment, Franceli L. Cibrian, Kayla Anderson, Yingying 'Yuki' Chen, Lauren Min, Lizbeth Escobedo

Engineering Faculty Articles and Research

Monitoring children’s handwriting, such as avoiding writing assignments, displaying uneven letter formation, or showing slow writing speed, can help identify developmental and academic issues early. Poor handwriting affects up to 34% of children, leading to academic and self-esteem challenges. Handwriting assessments, typically conducted by teachers, are often delayed due to workload and could be subjective and inconsistent. This paper explores the potential of Optical Character Recognition (OCR) technology to augment and ease handwriting assessments. Based on an evaluation of 10 OCR algorithms using 33 handwriting samples assessed by two experts, the research indicates that Pen to Print and Google are …

Price-Signal-Based Control Strategy For Heat Pump Water Heaters In Demand Response Applications, Othman A. Murad

Dissertations and Theses

This work presents a price-signal-based control strategy for residential Heat Pump Water Heaters (HPWHs) aimed at reducing electricity costs and shifting load away from high-price periods. By integrating the California Load Flexibility Research and Development Hub (CalFlexHub) prototype price signals, the Consumer Technology Association (CTA-2045-B) communication protocol, and the Object-oriented, Controllable, High-resolution Residential Energy (OCHRE) simulation framework, a rule-based controller was developed to align HPWH operation with dynamic electricity pricing while maintaining hot water availability.

The control strategy was evaluated through two case studies: one using a fixed water draw profile under varying levels of price signal foresight, and another …

Real-World Implementation Of A Noninvasive, Ai-Augmented, Anemia-Screening Smartphone App And Personalization For Hemoglobin Level Self-Monitoring, Robert G. Mannino, Julie Sullivan, Jennifer K. Frediani, Paul George, Jeremy Whitson, James Tumlin, L. Andrew Lyon, Erika A. Tyburski, Wilbur A. Lam

Engineering Faculty Articles and Research

Anemia, characterized by low blood hemoglobin (Hgb) levels, afflicts >2 billion individuals worldwide. Here, we report real-world data generated by a smartphone app that noninvasively screens for anemia using only “fingernail selfies.” App data for anemia screening were obtained from >1.4 million uses across the United States enabling geographic mapping of Hgb levels. Of those, 9,061 users also self-reported complete blood count Hgb levels for comparison, resulting in accuracy and performance that match gold standard laboratory testing and a sensitivity and specificity of 89% and 93%, respectively, when using an anemia cutoff of 12.5 g/dL. Geotagged data enabled construction of …

New Signal Identification Algorithms For Enhanced Gamma-Ray Burst Detection In The Advanced Particle-Astrophysics Telescope, Longhao Huang

McKelvey School of Engineering Graduate Student Theses & Dissertations

This work presents a series of algorithmic advancements aimed at improving photon signal identification and gamma-ray burst (GRB) source localization for the Advanced Particle-astrophysics Telescope (APT) and its Antarctic Demonstrator (ADAPT). These advancements are aimed at identifying valid signals in noisy environments. Previous methods failed to effectively distinguish real photon signals from noise, prompting us to develop a new photon detection algorithm with peak counting. Instead of integrating all waveform data in the observation window, we use multiple thresholds to accurately identify single-photon and two-photon arrival events, minimizing false counts due to amplifier noise. The new peak count algorithm also …

Emerging Applications On Reconfigurable Computing Platforms, Zhenyu Xu

All Dissertations

Security and high-performance computing have become two of the most critical demands in modern technology. The increasing complexity of digital systems, the need for real-time processing, and the emergence of sophisticated cyber threats require computing solutions that balance computational power with adaptability and security. Reconfigurable computing platforms, particularly Field-Programmable Gate Arrays (FPGAs), offer a promising solution to these challenges by combining flexibility with hardware acceleration. Many new applications have emerged with the developing of reconfigurable platforms.

FPGAs can be utilized in two primary directions: as control and high-precision measurement units for security-sensitive applications, and as accelerators capable of outperforming GPUs …

Construction And Characterization Of An Rf Anechoic Range, Logan Gentry

Electrical Engineering and Computer Science Undergraduate Honors Theses

Anechoic RF ranges are electromagnetically quiet spaces intended to provide conditions suitable for testing and classifying electronic equipment. Typically, ranges are constructed indoors, which presents a number of design challenges related to room geometry, cost, and material selection. This report describes the creation of an indoor anechoic range intended for characterization of antennas. Furthermore, the range is characterized for performance across a wide range of discrete frequencies in the UHF band according to CISPR standards, resulting in the determination of a lower frequency limit at which the room performance begins to degrade. The characterization of this range agrees with far-field …

Design Considerations Of A Gpu, Nicholas M. Devilliers

Electrical Engineering and Computer Science Undergraduate Honors Theses

With the current era of AI technology, the era of single instruction multiple data has become an increasingly viable solution to accelerate training. The problem is that while software to use GPUs and other hardware accelerators, designing GPUs and ASIC devices has become increasingly more expensive and there aren’t great examples of generic GPUs that anyone can use and modify. In this thesis, there are four design considerations that will be discussed and how they affect the result of a generic GPU. The four considerations that were talked about in the thesis are, word width, arithmetic type, number of stages, …