Electromagnetics and Photonics Commons^™

Series Aperture Coupled Fed Phased Array Antenna, Guang Yang

Electrical Engineering Theses and Dissertations

Phased arrays are employed in a wide range of civil and Military contexts, including RADAR, cellular communications, and satellite communications. However, modern phased-array antennas require complex design and bulky structure at high costs, hindering their implementation in many applications. The critical aspect of a phased array design lies in power splitting with a proper phase to each radiating element. Conventional power splitters such as quarter-wavelength or Wilkinson power splitters suffer problems associated with complex array network and high power dissipation. Furthermore, popular phase shifters such as MEMS switch, ferrite-based or PIN diode have drawbacks of low power-handling capability, expensive packaging, …

Gpu Based Monte Carlo Estimation Of Eddy Current Losses In Electromagnetic Coil-Core System, Adwaith Ravichandran

Theses and Dissertations

A novel parallelizable probabilistic approach to model eddy currents in AC electromagnets is presented in this research. Consequently, power loss associated with the formation of these eddy currents is estimated and validated using experimental data. Furthermore, predicting the effect of ferromagnetic alternating field enhancement on power loss in the source excitation winding has been an active area of research. Unlike a stationary field, an alternating sinusoidal field diffuses partially into the ferromagnetic material leading to a predictably sub-optimal field enhancement. To model these physics, finite element techniques employ nonlinear iterative solvers which are time consuming. A novel method is developed …

Controlled Radiation Capsule For Precision And Rapid Cancer Treatment, Hoseon Lee, Zsolt Kollar, Bailey R. White, Junia Nguyen, David Roque, Sowjanya Palagani

Symposium of Student Scholars

This research aims to transform cancer treatment through the optimization of brachytherapy, with a focus on reducing treatment duration, setup complexities, and financial burdens, all while emphasizing patient safety. Patients living at a distance from radiation clinics, particularly those undergoing extended Low Dose Radiation brachytherapy, often struggle with the formidable financial challenges associated with securing nearby accommodations. In response to these issues, the research introduces a radiation capsule designed to condense the conventional six-month treatment period to approximately just one week, thereby significantly reducing the duration of required accommodations. This capsule is especially relevant considering the construction cost of $40 …

Improving Cellphone-Based Bio-Imaging Technique For Fluorescence Detection, Erteza T. Efaz

LSU Master's Theses

The research presented in this thesis focuses on the design, development, and evaluation of a fluorescence detection system. The system is implemented primarily as an Android application, Auto Camera, which leverages smartphone cameras to capture and analyze fluorescent images. The application provides a user-friendly interface with some configurable features like exposure time, ISO speed, and storage limit; as well as defining detection thresholds and setting acquisition intervals. This study begins with the architectural framework of the Android application, which is written in Java using Android Studio. The API compatibility is set to version 33, and users are prompted to grant …

Directional Microwave Emission From Femtosecond-Laser Illuminated Linear Arrays Of Superconducting Rings, Thomas J. Bullard, Kyle Frische, Charlie Ebbing, Stephen J. Hageman, John Morrison, John Bulmer, Enam A. Chowdury, Michael L. Dexter, Timothy J. Haugan, Anil K. Patnaik

Faculty Publications

We examine the electromagnetic emission from two photo-illuminated linear arrays composed of inductively charged superconducting ring elements. The arrays are illuminated by an ultrafast infrared laser that triggers microwave broadband emission detected in the 1–26 GHz range. Based on constructive interference from the arrays a narrowing of the forward radiation lobe is observed with increasing element count and frequency demonstrating directed GHz emission. Results suggest that higher frequencies and a larger number of elements are achievable leading to a unique pulsed array emitter concept that can span frequencies from the microwave to the terahertz (THz) regime.

Atmospheric Propagation Of Qubits: Laboratory Experiments To Field Demonstrations, Keith A. Wyman

Theses and Dissertations

Free-space quantum networks can enable global-scale quantum communication via satellite-based nodes and quantum ground transceivers. To enable building of robust global quantum networks, it is critical to learn how the state of the qubit is transformed while propagating through the atmosphere. With such an overarching goal, we built a laboratory based atmospheric turbulence simulator (ATS) to characterize the effects of atmospheric turbulence on an entangled pair of photons as a function of statistical quantities such as the Fried parameter or scintillation index for long-distance communication. Specifically, the changes in the statistical properties associated with a quantum source was investigated using …

Brdf Measurements And Physical Optics Modeling Applied To Anisotropic Satellite Solar Cells, Madilynn E. Compean

Theses and Dissertations

Light curve analysis is often used to discern information about satellites in geosynchronous orbits, and since solar panels comprise relatively large surface areas, their reflected energy can contribute greatly to observed light curves. Data was collected using a space qualified solar cell interrogated by a green HeNe laser. The data validated certain aspects from previous work, but also identified multi-slit behavior, showed that the specular term was a second diffraction pattern, and diagnosed the out-of-plane diffraction curvature as the conical diffraction phenomenon. Two physical-optics-based models were developed to incorporate these new features and better predict solar cell BRDF solely from …

Uncertainties In Retrieval Of Remote Sensing Reflectance From Ocean Color Satellite Observations, Eder I. Herrera Estrella

Dissertations, Theses, and Capstone Projects

Ocean Color radiometry uses remote sensing to interpret ocean dynamics by retrieving remote sensing reflectance (������) from satellite imagery at different scales and over different time periods. ������ spectrum characterizes the ocean color that we observe, and from which we can discern concentrations of chlorophyll, organic and inorganic particles, and carbon fluxes in the ocean and atmosphere. ������ is derived from the total radiance at the top of the atmosphere (TOA). However, it only represents up to ten percent of the total signal. Hence, the retrieval of ������ from the total radiance at TOA involves the application of atmospheric correction …

Analysis Of Coronal Magnetic Field Parameters During X- And M-Class Solar Flares, Seth H. Garland

Theses and Dissertations

Using Non-Linear Force Free Field (NLFFF) extrapolation, 3D magnetic fields were modeled from the 12-minute cadence Helioseismic and Magnetic Imager (HMI) photospheric vector magnetograms, spanning a time period of one hour before through one hour after the start of 18 X-class flares and 12 M-class flares. Several magnetic field parameters were calculated from the modeled fields directly – as well as from the power spectrum of surface maps generated by summing the fields along the vertical axis – for two different regions: areas with photospheric Bz ≥ 300 G (Active Region – AR) and areas above the photosphere with the …

An Analytical Framework For Photonic Storage And Retrieval: Implications For Quantum Optical Networks, Billie V. Deluca

Theses and Dissertations

Quantum information and communication is the next revolution in information technology. However, communication through quantum networks will require the ability to transmit, store, and interact with photonic quantum bits (qubits). The focus of this dissertation is a theoretical description of a promising technology for storage of photonic states employing electromagnetically induced transparency (EIT). A general semiclassical model for EIT photonic storage will be developed, a key capability required for understanding the effect of storage that is independent of the photonic state being stored. This dissertation demonstrates the capability of this model to predict light pulses retrieved from EIT storage as …

Boundary Integral Equation Methods For Superhydrophobic Flow And Integrated Photonics, Kosuke Sugita

Dissertations

This dissertation presents fast integral equation methods (FIEMs) for solving two important problems encountered in practical engineering applications.

The first problem involves the mixed boundary value problem in two-dimensional Stokes flow, which appears commonly in computational fluid mechanics. This problem is particularly relevant to the design of microfluidic devices, especially those involving superhydrophobic (SH) flows over surfaces made of composite solid materials with alternating solid portions, grooves, or air pockets, leading to enhanced slip.

The second problem addresses waveguide devices in two dimensions, governed by the Helmholtz equation with Dirichlet conditions imposed on the boundary. This problem serves as a …

Mathematical Model Of An Industrial Robot Built On The Basis Of Linear Motion Mechatron Modules, Matyokubov Nurbek Rustamovich, Rakhimov Temurbek Omonboyevich

Chemical Technology, Control and Management

The use of Industry 4.0 technologies in modern production serves to increase production efficiency. Robots and robotic complexes with innovative intelligent control are widely used in industrial production. However, studying their mechanical part, linear motion mechatronic modules and control system is a complex object. The variety and complexity of control methods and operating modes negatively affects the operator's working time and production productivity. In such cases, it is necessary to improve control methods and develop technologies used in industry, including robots and robotic manipulators, which allow to perform short movements with high accuracy and speed. In the article, the mathematical …

The Relaying Network In Free-Space Optical Communications Using Optical Amplifiers In Cascaded Configuration, Ucuk Darusalam, Arockia Bazil Raj, Fitri Yuli Zulkifli, Purnomo Sidi Priambodo, Eko Tjipto Rahardjo

Makara Journal of Technology

Optical relaying is the best technique to implement free-space optical (FSO) communications as a terrestrial platform. However, atmospheric turbulence (AT) limits the optical-propagation path length. In this study, the implementation of some optical amplifiers (OAs) in cascaded configuration, namely, erbium-doped fiber amplifiers, semiconductor OAs, and Raman amplifiers (RAs), are investigated through simulation. This study aims to search for the maximum link distance of an optical propagation and enhance the FSO performance caused by each configuration of OAs. The optical relaying network consists of three nodes, with each node designed with a space of several kilometers under the influence of AT. …

Performance Of Siso And Mimo Antenna Systems In Suburban And Urban Scenarios For V2i Communications At 5.9 Ghz And 28 Ghz, Oluwaseun Falade

Theses and Dissertations

As the need for Vehicle to Infrastructure (V2I) innovations increases, further research is needed to test the performance of antennas installed on vehicles in realistic scenarios including their radiation patterns and optimal location. This thesis considers realistic suburban and urban scenarios with SISO and MIMO antennas for V2I systems at 5.9 GHz and 28 GHz. The simulation is based on Ray tracing (RT) channel models to accurately model the effects of obstacles such as buildings and vehicles on the communication signals. Time-varying vehicular environments are simulated using a 3-D RT tool involving a vehicle and a base station. This research …

Exploring Bistatic Scattering Modeling For Land Surface Applications Using Radio Spectrum Recycling In The Signal Of Opportunity Coherent Bistatic Simulator, Dylan R. Boyd

Theses and Dissertations

The potential for high spatio-temporal resolution microwave measurements has urged the adoption of the signals of opportunity (SoOp) passive radar technique for use in remote sensing. Recent trends in particular target highly complex remote sensing problems such as root-zone soil moisture and snow water equivalent. This dissertation explores the continued open-sourcing of the SoOp coherent bistatic scattering model (SCoBi) and its use in soil moisture sensing applications. Starting from ground-based applications, the feasibility of root-zone soil moisture remote sensing is assessed using available SoOp resources below L-band. A modularized, spaceborne model is then developed to simulate land-surface scattering and delay-Doppler …

Tunable Linewidth Chip-Level Lasers Using Hybrid Integration Methods, Charles Porter

All Theses

Photonic integrated circuits (PICs) have significant value in today’s world of research. They enable devices to experience large reductions in size, weight, operation power, and cost (SWAPc), making photonic technology more accessible than ever. The functionality of PICs is greatly enhanced due to the realization of both active and passive devices within a single device structure. This is made possible through hybrid integration, which utilizes various coupling methods to transfer light from an active chip to a passive chip. Hybrid integration technology tremendously expands the capabilities of PICs, leading to a plethora of applications. One significant application is that of …

Characteristics Of Refractivity And Sea State In The Marine Atmospheric Surface Layer And Their Influence On X-Band Propagation, Douglas Matthew Pastore

Electronic Theses and Dissertations

Predictions of environmental conditions within the marine atmospheric surface layer (MASL) are important to X-band radar system performance. Anomalous propagation occurs in conditions of non-standard atmospheric refractivity, driven by the virtually permanent presence of evaporation ducts (ED) in marine environments. Evaporation ducts are commonly characterized by the evaporation duct height (EDH), evaporation duct strength, and the gradients below the EDH, known as the evaporation duct curvature. Refractivity, and subsequent features, are estimated in the MASL primarily using four methods: in-situ measurements, numerical weather and surface layer modeling, boundary layer theory, and inversion methods.

The existing refractivity estimation techniques often assume …

Design And Fabrication Of An Optical Blade Tip Timing Sensor, Nick Tomlinson

All Theses

Electricity is a vital energy source that powers modern technology. Turbines are heavily relied on in the electric power industry for the conversion of natural energy sources into electricity. These turbines operate under harsh conditions which increase the likelihood of blade damage. Structural health monitoring of a turbine’s blades is important to detect problems before a blade experiences failure. The blade tip timing method can be used to monitor blade vibrations and determine if damage has occurred. An optical blade tip timing sensor is designed and fabricated to advance the field of sensing in the power industry.

Miniature, Submersible Electromagnetic Pumps Of Molten Lead And Sodium For Gen-Iv Nuclear Reactors Development, Ragai M. Altamimi

Nuclear Engineering ETDs

Heavy metals and alkali Liquid Metals are suitable coolants for Generation IV terrestrial nuclear reactors for operating at elevated temperatures for achieving plant thermal efficiency more than 40% and the thermochemical generation of hydrogen fuel. In addition, the low vapor pressure of these liquids eliminates the need for a pressure vessel and instead operates slightly below ambient pressure. A primary issue with the uses of these coolants is their compatibility with nuclear fuel, cladding and core structure materials at elevated temperatures more than 500oC. Therefore, in pile and out-of-pile test loops have been constructed or being considered for quantifying the …

Fabrication And Measurement Of Lt-Gaas Photoconductive Antennas And Arrays, Zachary Paul Uttley

Graduate Theses and Dissertations

This thesis presents the fabrication and measurement of LT-GaAs based terahertz (THz) photo conductive antennas (PCAs) and arrays. The LT-GaAs THz PCAs are fabricated to serve as reference devices to new 2D material black phosphorous (BP) based THz PCAs. The LT-GaAs and BP devices have identical metallic electrodes, allowing for a comparison of emitted THz intensity and bandwidth. All PCAs have been measured using an open bench pulsed time-domain spectroscopy (TDS) system with a usable bandwidth from 0.1-4 THz, pumped with a 780nm Ti:Sapphire femtosecond laser. The results have shown LT-GaAs devices outperforming BP devices in signal amplitude and bandwidth …

Adaptive Gps Antenna Array Beam Nulling Effectiveness Under Varying Antenna Element Positioning, Aadesh Neel

Electrical and Computer Engineering ETDs

Global Positioning System (GPS) is an essential part of modern life but is susceptible to same frequency jamming. GPS jamming can add excessive noise to a received low power signal and have the capability to change or completely distort information being sent through the GPS signal. Adaptive antenna arrays have long since been a solution to mitigating GPS jamming via beamnulling algorithms. However, there is little research on the effectiveness of these beamnulling algorithms under varying element positioning. In this work, an adaptive antenna array, consisting of Right-Hand Circularly Polarized (RHCP) nearly square GPS antenna elements, was constructed and tested …

High Performance Scene Generator For Testing Of Imaging Sensors, Austin Modoff

Electrical Engineering Theses and Dissertations

Since the invention of modern solid-state imaging sensors in the 1980s, considerable advancements have been made, improving aspects such as frequency response, dynamic range, resolution, and wavelength diversity, as well as inventing many different types of sensor architectures such as framing sensors and event sensors. While considerable improvements in this field are evolving every day, the methods by which to test and validate these systems remain unchanged. Many of these test platforms require specialized designs to test only one or two specific qualities. For example, a spinning disk in front of a black body source to measure the frequency response …

Adaptive Plasmonic Metasurfaces For Radiative Cooling And Passive Thermoregulation, Azadeh Didari-Bader, Nooshin M. Estakhri, Nasim Mohammadi Estrakhri

Engineering Faculty Articles and Research

In this work, we investigate a class of planar photonic structures operating as passive thermoregulators. The radiative cooling process is adjusted through the incorporation of a phase change material (Vanadium Dioxide, VO₂) in conjunction with a layer of transparent conductive oxide (Aluminum-doped Zinc Oxide, AZO). VO₂ is known to undergo a phase transition from the “dielectric” phase to the “plasmonic” or “metallic” phase at a critical temperature close to 68°C. In addition, AZO shows plasmonic properties at the long-wave infrared spectrum, which, combined with VO₂, provides a rich platform to achieve low reflections across the …

High Performance Radar System, Danny Maas

Electrical Engineering

This report covers the design, fabrication, and test of an X-band FMCW radar inspired by the radars from Cal Poly course EE 541, “Advanced Microwave Laboratory.” In this class, 2.4GHz Doppler and FMCW radars are designed and built using consumer off-the-shelf (COTS) components. Operability is the focus of this class, sacrificing performance, accuracy, and precision. this project aims to improve upon those radars by using custom-designed components instead of COTS components and shifting the operating frequency to 10GHz.. The use of custom components can improve output power and frequency stability, and higher frequency reduces component size. The FCC allows amateur …

Design, Modeling, And Testing Of A Novel Inductor For Electric Vehicles: Iron Nitride Soft Magnetic Composites, Sydney F. Fultz-Waters, Jacob Krynock

Materials Engineering

New technology for electric vehicles (EVs) must meet the requirements of higher energy usage, lower costs, and more sustainable source materials. One promising material for EV power system components is iron nitride (IN) soft magnetic composites (SMCs) because of their competitive magnetic properties and high abundance of the source materials. As part of an ongoing program at Sandia National Laboratories, this project focused on using computer modeling to optimize the prototyping process for an iron nitride SMC toroidal inductor to reach a target inductance of 600 μH. Four inductors with different combinations of wiring (26 AWG and 20 AWG) and …

Photophoretic Optical Trapping, Essa Ababseh

Electrical Engineering

Photophoretic Optical Trapping (POT) is a relatively new concept in the field of optics which has potential application in 3D display. The POT is realized by confining a particle within a very small location of the optical system, mostly around the focus. The particle, if captured by the beam, has the potential to print visible 3D images in free space. Our POT system is encapsulated by an acrylic enclosure, which also incorporates a biconvex lens as well as an adjustable focus laser module. Particles are released around the top of the lens’ focal point until the captured particle can be …

Wireless Energy Harvesting System, Matthew Palma, Audrey Toop, Andrew Fahey

Electrical Engineering

The modern world is built upon wireless transmission of data. The signals that carry this data travel through the air, an untapped source of power. Unreceived transmissions are dissipated into useless forms of energy when they should be reclaimed. Wireless electronics can theoretically be powered by harvesting energy from the electromagnetic signals in the wireless internet frequency band. The aim of this project is to develop a system to capture ambient energy, convert it into DC power, and store the power for later use. The product will consist of three subsystems: an antenna receiver, a rectifier and voltage-multiplier, and a …

Sky Survey Radio Telescope, Jack E. Mcguigan

Electrical Engineering

This document outlines the design of a radio telescope designed to perform hydrogen line sky surveys. The telescope produces radio images mapping the intensity and relative velocities of hydrogen concentrations to their sky coordinates. Over the course of a day, the telescope images the regions of space visible to it, allowing sky survey imagery to be updated daily. Sky survey images are comprised of an array of pixels corresponding to specific sky coordinates. Each 8-bit RGB pixel contains information on the concentrations of hydrogen in the brightness and relative velocity in the color. Radio images mapping the concentrations and velocities …

Design Of Class F-Based Doherty Power Amplifier For S-Band Applications, Kyle Chang

Master's Theses

Modern RF and millimeter-wave communication links call for high-efficiency front end systems with high output power and high linearity to meet minimum transmission requirements. Advanced modulation techniques, such as orthogonal frequency-division multiplexing (OFDM) require a large power amplifier (PA) dynamic range due to the high peak-to-average power ratio (PAPR). This thesis provides the analysis, design, and experimental verification of a high-efficiency, high-linearity S-band Doherty power amplifier (DPA) based on the Class F PA. Traditional Class F PAs use harmonically tuned output matching networks to obtain up to 88.4% power-added efficiency (PAE) theoretically, however the amplifier experiences poor linearity performance due …

Characterization Of Low Power Hfo2 Based Switching Devices For In-Memory Computing, Aseel Zeinati

Theses

Oxide based Resistive Random Access Memory (RRAM) devices are investigated as one of the promising non-volatile memories to be used for in-memory computing that will replace the classical von Neumann architecture and reduce the power consumption. These applications required multilevel cell (MLC) characteristics that can be achieved in RRAM devices. One of the methods to achieve this analog switching behavior is by performing an optimized electrical pulse. The RRAM device structure is basically an insulator between two metals as metal-insulator-metal (MIM) structure. Where one of the primary challenges is to assign an RRAM stack with both low power consumption and …